Manuals+ — User Manuals Simplified.
Home » Support » How to set up the remote login router web interface
How to set up the remote login router web interface
Contents
1 How to set up the remote login router web interface
2 Application introduction:
3 Set up steps
4 Q1: Can’t remote login the router?
4.1 1.The service provider shields the corresponding
port;
4.2 2.WAN IP must be the public IP address;
4.3 3.WAN IP address has changed.
5 DOWNLOAD
6 Related Posts
How to set up the remote login router web interface
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU
Application introduction:
If you want to manage your router anywhere on the network, you can configure it in real time and securely. The
remote WEB management function enables remote management of the router where it is connected to the
Internet.
Set up steps
STEP-1: Login to the TOTOLINK router in your browser.
STEP-2: In the left menu, click System Status, check the WAN IP address and remember.
STEP-3: In the left menu, click Network ->WAN Settings. Select “Enable Web Server Access on WAN”. Then
click Apply.
[Note]:
The remote WEB management port set by the router is only needed when the external network computer
accesses the router. Local area network computer access router is not affected and still uses 192.168.0.1
access.
STEP-4: In external network, use WIN IP address + port access, as shown below:
Q1: Can’t remote login the router?
1.The service provider shields the corresponding port;
Some broadband service providers may block common ports such as 80, resulting in inaccessibility of the router
interface. It is recommended to set the WEB management port to 9000 or higher. The external network user uses
the set port to access the router.
2.WAN IP must be the public IP address;
The computer in the LAN accesses http://www.apnic.net. If the IP address is different from the IP address of the
router’s WAN port, the IP address of the WAN port is not the public IP address, which prevents the external
network user from directly accessing the router interface. It is recommended to contact the broadband service
provider to solve the problem.
3.WAN IP address has changed.
When the Internet access mode of the WAN port is dynamic IP or PPPoE, the IP address of the WAN port is not
fixed. When using the external network access, you need to confirm the IP address of the router WAN port.
DOWNLOAD
How to set up the remote login router web interface – [ Download PDF]
Manuals+,
">
