SHE605 HDBaseT™ 4K60
18Gbps, Audio Deembed, 150/120m, PoC
VER 1.0
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction. ........................................................................................ 1
2. Features. .............................................................................................. 1
3. Package Contents. ............................................................................. 2
4. Specifications. ..................................................................................... 2
5. Operation Controls and Functions. .................................................... 4
5.1 Transmitter Panel. .......................................................................... 4
5.2 Receiver Panel. ............................................................................. 5
5.3 IR Pin Definition. ............................................................................. 6
6. Application Example. ......................................................................... 8
1. Introduction
This 18Gbps HDMI Extender can extend high definition video / audio signal,
RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between
transmitter and receiver via a single CAT cable. It supports resolution up to
4K2K@60Hz 4:4:4, 18Gbps and HDCP 2.2. One HDMI loop port is available
for output. The extender also supports de-embedded audio for L/R audio
output. In addition, the extender is equipped with two-way IR pass-through
which allows for source and display control.
This HDMI extender includes two units: transmitter unit and receiver unit. The
transmitter unit is responsible for capturing HDMI input signal and carrying
the signal via one cost effective Cat5e/6 cable, and transmitting / emitting IR
control signals. The receiver unit is responsible for receiving the HDMI signal
and transmitting / emitting IR control signal.
The extender offers the most convenient solution for HDMI extension via a
single Cat5e/6 with long distance capability, and is the perfect solution for
any application.
2. Features
☆ HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
☆ Support 18Gbps video bandwidth
☆ The maximum extended transmission distance via a single Cat5e/6 cable:
394ft / 120 meters for 4K2K signal;
492ft / 150 meters for 1080P signal
☆ Support one HDMI loop output on the transmitter
☆ Extract audio to analog stereo output on receiver
☆ With bi-directional IR, RS-232 and CEC pass-through
☆ HDR, HDR10+, Dolby Vision and HLG function supported
☆ Support PoC (Power over Cable) function
☆ Compact design for easy and flexible installation
1/8
3. Package Contents
Qty
Item
1
1
1
18Gbps HDMI over HDBaseT Extender (Transmitter)
18Gbps HDMI over HDBaseT Extender (Receiver)
IR Blaster cable (1.5 meters)
1
20~60KHz IR Receiver cable (1.5 meters)
4
2
Mounting Ear
3-pin Phoenix connector
1
24V/1A Locking Power adapter
1
User Manual
4. Specifications
Technical
HDCP Compliance HDCP 2.2 / HDCP 1.4
Video Bandwidth
18Gbps
4K2K 50/60Hz 4:4:4
4K2K 50/60Hz 4:2:2
4K2K 50/60Hz 4:2:0
Video Resolution
4K2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p, 480i
All HDMI 3D TV formats
All PC resolutions including 1920 x 1200
Color Space
RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth
8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr
4:2:2/4:2:0)
8-bit (4K60Hz 4:4:4 )
LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby
HDMI Audio Formats TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS
HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats
ESD Protection
PCM 2.0
Human body model — ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
2/8
Connection
Transmitter
Inputs: 1x HDMI Type A [19-pin female]
Outputs: 1x HDMI Type A [19-pin female]
1x HDBT OUT [RJ45, 8-pin female]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
Receiver
Inputs: 1x HDBT IN [RJ45, 8-pin female]
Outputs: 1x HDMI Type A [19-pin female]
1x AUDIO OUT [3.5mm Stereo Mini-jack]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
Mechanical
Housing
Metal Enclosure
Color
Black
Transmitter / Receiver:
140mm [W] x 65mm [D] x 18mm [H]
Dimensions
Weight
Power Supply
Transmitter: 160g, Receiver: 155g
Input: AC 100 - 240V 50/60Hz
Output: DC 24V/1A (Locking connector)
9.36 W
Power Consumption
Operating
32 - 104°F / 0 - 40°C
Temperature
Storage Temperature -4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)
Resolution / Distance
4K2K
394ft / 120M
1080P
492ft / 150M
Resolution /
Cable Length
HDMI IN / OUT
4K60 Feet / Meters
16ft / 5M
4K30 Feet / Meters
32ft / 10M
1080P60 Feet / Meters
50ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.
3/8
5. Operation Controls and Functions
5.1 Transmitter Panel
No.
Name
1
Power LED
Function Description
2
SERVICE port Firmware update port.
3
DC 24V
4
HDBT OUT
Red LED indicates that the transmitter is powered on.
DC 24V/1A power supply input port.
5
6
RJ45 connector for connecting the HDBT IN port of receiver
with a CAT 5e/6 cable.
▪ Illuminating: Transmitter and Receiver are in good
connection status.
Connection
▪ Flashing: Transmitter and Receiver are in poor connection
Signal
Indicator lamp status.
▪ Dark: Transmitter and Receiver are not connected.
▪ Illuminating: HDMI signal with HDCP.
Data Signal
▪ Flashing: HDMI signal without HDCP.
Indicator lamp
▪ Dark: No HDMI signal.
7 HDMI OUT
8
9
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the
other one doesn’t need power supply.
HDMI IN
IR IN
10 IR OUT
HDMI loop output for display.
HDMI source input.
IR input port for receiving the signal of IR remote.
IR output port for control of source device. This IR output signal
is from the IR IN port of receiver.
4/8
11 RS-232
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through from transmitter to
receiver or from receiver to transmitter.
5.2 Receiver Panel
No.
Name
1
Power LED
Function Description
2
SERVICE port Firmware update port.
3
DC 24V
4
HDBT IN
Red LED indicates that the receiver is powered on.
DC 24V/1A power supply input port.
5
6
RJ45 connector for connecting the HDBT OUT port of
transmitter with a CAT 5e/6 cable.
▪ Illuminating: Transmitter and Receiver are in good
Connection
connection status.
Signal
▪ Flashing: Transmitter and Receiver are in poor connection
Indicator lamp status.
▪ Dark: Transmitter and Receiver are not connected.
Data Signal
Indicator
7 HDMI OUT
AUDIO OUT
8
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the
other one doesn’t need power supply.
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI output for display.
3.5mm stereo connector for analog audio output.
5/8
9
IR IN
IR input port for receiving the signal of IR remote.
10 IR OUT
IR output port for control of display device. This IR output signal
is from the IR IN port of transmitter.
11 RS-232
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through from transmitter to
receiver or from receiver to transmitter.
5.3 IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
IR RECEIVER
IR BLASTER
IR Blaster
IR Blaster Signal
Power
NC
IR Receiver
IR Signal
Power
Grounding
6/8
HDBT IN
DC 24V
HDBT OUT
DC 24V
The following is IR system diagram about IR cable use method.
TV
Note: When the angle between the IR receiver and the remote control is ± 45 °, the
transmission distance is 0-5 meters; when the angle between the IR receiver and the
remote control is ± 90 °, the transmission distance is 0-8 meters.
7/8
6. Application Example
8/8
">
