ESDEC ClickFit Evo Mounting System Installation Guide

ESDEC Clickfit Evo is a mounting system designed for installing solar panels on sloping roofs with roof tiles. It offers both portrait and landscape setups, and is compatible with standard and 60mm clamps. The system features adjustable roof hooks to accommodate varying roof heights and tile thicknesses, simplifying installation on diverse roof types. Quick-click connections ensure fast and easy assembly.

PDF Download
Document
ESDEC ClickFit Evo Mounting System Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Adjustable roof hooks
  • Portrait & landscape setups
  • Click-fit mounting
  • Compatible with 60mm clamp
  • Suitable for various tile types

Frequently asked questions

Sloping roofs with roof tiles. For roof pitches below 20 degrees, additional water-retaining measures may be necessary.

Maximum solar panel size of 3.92 m².

Installation must be performed by qualified personnel, using safety harnesses, nets, and edge protection. Always use lifting assistance and follow the 'working safely on roofs' manual.

Functional bonding is achieved through the EVO universal module clamp and rails. A separate bonding cable must be mounted to the EVO rail and connected to the inverter or earthing contact. Consult HD-IEC 60364 and local regulations.

Yearly checks of bolt, nut, screw, and clamp connections, and a visual inspection for corrosion. Report any issues to Esdec BV with photographs.
Preparing document for printing…
0%