AIR COMPRESSION FULL
LEG MASSAGER
BVAIRPFLEBA
2
Safety & Warnings
3
Overview
5
Operation
6
Cleaning & Care
12
Specifications
14
FAQ
15
Troubleshooting
16
Notes
17
SAFETY & WARNINGS
• This leg massager is intended for the temporary relief of minor muscle aches and pains
and for the temporary increase in circulation to the treated leg in people who are in
good health. The leg massager simulates kneading and stroking of tissues by using airinflatable boots.
• Follow all instructions in this user guide carefully and retain this user guide for future
reference.
• Do not drop the leg massager.
• Only use the leg massager on yourself.
• Do not insert foreign objects into any openings.
• Do not attempt to disassemble the leg massager.
• Do not crush the pressured leg massager.
• Do not store the leg massager in direct sunlight, high humidity, or dust.
• To avoid any possibility of accidental strangulation, keep this leg massager away from
children and do not drape the hoses around your neck.
• Ensure that children do not play the leg massager unsupervised; some parts may be
swallowed.
• Do not use the leg massager near electrical appliances or electromagnetic fields
generated by mobile phones or other devices, as it may cause interference to the phone
or the leg massager.
• This leg massager is for adult use only.
Caution
This leg massager is not intended for use if any of the following medical conditions exist.
Consult with a physician whenever there is doubt whether it is clinically safe to use.
• Presumptive evidence of congestive heart failure where an increase in blood returned to
the heart could be detrimental.
• Pre-existing deep vein thrombosis (DVT) or blood clots.
• Existing haemorrhagic disease or coagulation problems.
• Thrombophlebitis.
• Pulmonary embolism
This leg massager should not be used on individuals with enema, ischemic vascular
disease, or severe peripheral neuropathy.
3
Safety Precautions
• Do not use a voltage higher than the leg massager requires.
• Do not allow a third party to repair or dismantle the leg massager.
• Do not dismantle the leg massager yourself.
• Do not use the leg massager in a place where it may become wet or damp. Do not use
the leg massager if it becomes wet.
• Stop using the leg massager immediately if you feel uncomfortable or any
abnormalities occur.
• Do not use this leg massager in a high temperature environment.
• Do not place the leg massager in a place where it may be in contact with flammable or
explosive items.
• Do not touch the leg massager with any sharp objects.
• Do not remove the hoses connected to each boot.
• Do not use the leg massager if you are pregnant.
• Do not use this leg massager on infected, swollen, burnt or otherwise damaged skin.
• Do not use the leg massager if you have any of the following health conditions:
4
o
Pacemaker or any other medical implant.
o
Heart disease.
o
Diabetes.
o
Fragile or injured bones.
o
Cancer.
o
High or low blood pressure.
o
Osteoporosis.
OVERVIEW
Air Compression Boots (Left/Right)
Remote Control
Display Screen
Control Panel
Velcro Strap
Air Pressure Hose Ports
Air Pressure Hoses (Left/Right)
Adapter
5
OPERATION
• This leg massager consists of an air pump, two solenoid valves and air compression
boots working together as one leg massager.
• The air pump is connected to the air compression boots with air hoses.
• Each boot has 3 compression chambers that inflate and deflate.
• Controlling the air pump and solenoid valves at a regular pace and different timing
simulates the kneading and stroking of the foot, calf, and thigh.
Before Use
• Check that the fabric is in good condition.
• Power on the leg massager and check it is working properly (i.e. icons of the remote
control are clearly illuminated).
• The leg massager may leave marks on your legs, which may not immediately fade. To
avoid marking your skin, wear stockings or pants when using the leg massager.
Note:
Do not wear clothing with zippers or metal detailing when using the leg massager as it
may damage the leg massager.
6
Connect the Air Hoses to the Control Panel
Insert the
air pressure hoses into the corresponding ports on the control panel.
Note:
Ensure
is facing up and the
R is facing down. Air pressure cannot be produced if the leg massager is not
configured correctly.
7
Wearing the Leg Massager
Place your foot into the massager. Secure the Velcro strap on the foot first, then follow the
sequence below to secure the other Velcro straps.
Note: Secure both Velcro straps on the calf.
Instep
Foot
Calf
Calf
Thigh
Knee
Notes:
• It is recommended to be sitting down when putting the leg massager on.
• Be careful not to let Velcro stick to clothing or stockings, as they may be
damaged.
• There are 2 Velcro straps on the thigh, which can be adjusted according to your
leg circumference.
• It is easier to attach the knee Velcro strap after securing the foot, calf, and thigh
straps.
8
Using the Leg Massager
Power
• Press the power button for 2 seconds to power the leg
massager on/off.
• When first powered on, the leg massager will have the
following default settings: Auto mode, mid intensity, high
heat, and level 3 vibration.
Mode
Press the mode button to switch between Auto, Leg, Foot,
Pinch, Press and Relax modes.
Intensity
Press to switch between Min, Mid and Max intensity.
Heat
Press to switch between Low, High, and Off.
Vibration
Adjust the vibration from level 1 (white light), level 2 (green
light) and level 3 (blue light).
9
Modes
Auto: Calf and feet pressure massage.
Leg: Only calf pressure massage.
Foot: Only foot pressure massage.
10
Pinch: Calf and feet pressure massage.
Press: Calf and feet pressure massage.
Relax: Calf and feet pressure massage.
Note:
• Sit or lie down when using the leg massager to avoid falling.
• The leg massager will remember the previous settings and return to them by
default when powered on.
11
CLEANING & CARE
Cleaning
• Before cleaning, power off the leg massager and unplug the hoses.
• Wipe the leg massager with a cloth dampened with neutral detergent and warm water.
Always wring out the cloth before cleaning.
• Never use thinner, benzine or alcohol to clean as they may cause discolouration or
malfunction.
• Avoid dropping, throwing or using force against the leg massager.
• Do not expose the leg massager directly to sun.
Notes:
• If rubbish or hair is caught in the Velcro, remove it with a toothpick.
• Do not insert foreign objects into the outlet of the hose.
• It is recommended that the leg massager be used by one person only.
Storage Requirements
• Store the leg massager in a dry, cool place and avoid direct sunlight.
• Keep out of the reach of children.
• Do not store other objects on the surface of the control panel or massager to avoid
damaging the surface and discoloration.
12
Storing the Leg Massager
1.
Secure the Velcro on the feet (1), ankles (2) and calves (3) and fold the feet Velcro
inwards (4).
4
1
2
2.
3
Fold the folded feet, ankles, and calves upward and place the hoses on top (5).
Secure with the knee and thigh Velcro straps (6, 7).
7
6
5
Maintenance
• Expected service life: Approximately 2 years at 2 uses per day.
• If the leg massager is damaged or requires maintenance or repair, cease use
immediately and contact help.Kogan.com for support.
• Do not attempt to repair the leg massager yourself.
13
SPECIFICATIONS
Power Specifications
DC 12V/2A
Power
24 W
AC Adapter
100-240VAC, 50/60Hz 0.8A
Pressurisation
Automatic pressurisation
Therapy Time (Automatic Shut-off)
20 mins
Recommended Use
Twice a day (i.e. 40 minutes per day)
Massage Intensity
Foot
Weak: 23±2kpa
Medium: 27±2kpa
Strong: 31± 2kpa
Calf
Weak: 23±2kpa
Medium: 27±2kpa
Strong: 31± 2kpa
Thigh
Weak: 23±2kpa
Medium: 27±2kpa
Strong: 31± 2kpa
• Size: 71.5cm x 26cm.
Size of Inflatable Air Compression
Boots (Size: ±2cm)
• Foot width: approx. 12-16 cm.
• Calf diameter: approx. 16.5-24 cm.
• Thigh diameter: approx. 19-33 cm.
Leg Massager Weight
Approx. 1.7kg
Control Panel Size (±0.5cm)
20 x 5.0 x 5.5 cm (L x H x W)
Temperature: 5°C~40°C
Operating Environment
Humidity: 15%~90%RH
Atmospheric pressure: 70kPa-106kPa
Temperature: -25°C~70°C
Storage Environment
Atmospheric pressure: 70kPa-106kPa
14
FAQ
A.
Under what circumstances should I not the leg massager?
Answer: Always check the Safety & Warnings section before use. Consult a doctor before
using the leg massager if you have any pre-existing health conditions. Do not use the leg
massager if you are pregnant, have recently given birth, have a fever or a blood pressure
disorder.
B.
How many times a day can I use the leg massager?
Answer: The massager will automatically power off after 20 minutes of continuous use. It is
not recommended that you use a massager for more than 40 minutes a day. Prolonged use
will over-stimulate muscles and nerves and may have adverse effects.
C.
Can the leg massager be used on body parts other than feet, calves, knees, and
thighs?
Answer: This leg massager is only for feet, calves, knees, and thighs. Use in other areas may
cause accident or injury.
D.
What size feet, calves and thighs are suitable for this leg massager?
Answer: Refer to Specifications.
15
TROUBLESHOOTING
If the solutions below are unsuccessful, contact help.Kogan.com for support.
Problem
Solution
The leg massager will not
power on.
Ensure the AC adapter is connected.
• The AC adapter is not connected.
The leg massager stops
working halfway through use.
• The hose connector is loose or broken. Contact
help.Kogan.com for support.
• It has been used continuously for 20 minutes.
The hose is broken. Contact help.Kogan.com for
support.
inflate.
• The hose is not connected properly.
Intensity is too weak.
• The Velcro is not tight enough.
• Your stockings or pants are too thick.
• Adjust the intensity setting on the control panel.
Intensity is too strong.
• Loosen the Velcro.
• Adjust the intensity setting on the control panel.
Air is not releasing.
If a lot of air is in the leg massager, it may take some
time to release. Unplug the hose and wait for a while
for the air to escape naturally.
Buzzing sound during
operation.
This is normal.
Velcro is making a crunching
sound during operation.
This is the sound of the Velcro slightly opening when
air enters. This is normal.
Disposal
This marking indicates that this appliance should not be disposed with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources.
16
NOTES
17
18
19
Need more information?
20
">