GO IN STYLE DAF LED Daytime Running Lights Installation Guide
PDF
Download
Document
Advertisement
Advertisement
INSTRUCTIONS SWITCHABLE DRL DAF - Start with disassemble your headlights and the 2 units on the back. - Replace the original DRL with the new ones with the thermal paste. - The original connector is going to new switch board. - And the flat cable to the DRL unit. - Be sure you mount the flat cable in the right way! - Make an 8mm hole to fit the connector to the outside of the headlight make sure the inside of the headlight is a flat surface. - The 4m wire is going to the 106 switch. - The blue cable is ground. - The black cable is the switch wire. - After that, you can put everything back together. No$ce: Plugs can only be installed this way. ">

Public link updated
The public link to your chat has been updated.
Advertisement