RCA | DRC6309 | User manual | RCA DRC6309 User manual

User manual
Manuel d’utilisation
Manual del Usuario
DRC69707E
EN
FR
ES
It is important to read this instruction book prior to using your new product for the first time.
Il est important de lire ce manuel d’instructions avant d’utiliser l’appareil pour la première fois.
Es importante que lea este libro de instrucciones antes de comenzar a usar su nuevo producto.
DRC69707E RCA 3L MTK.indd 1
8/9/2011 14:34:23
Safety Instructions
On Placement
EN
** SEE BOTTOM OF UNIT FOR GRAPHIC SYMBOLS **
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING: Should any trouble occur,
disconnect the AC power adapter and refer
servicing to a qualified technician.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT
PLACE OBJECTS FILLED WITH LIQUIDS ON OR
NEAR THIS UNIT.
WARNING:
TO
BE
COMPLETELY
DISCONNECTED
FROM
THE
POWER
INPUT, THE UNIT’S AC ADAPTER SHOULD
BE
DISCONNECTED FROM THE WALL
OUTLET. THE AC ADAPTER SHOULD NOT
BE OBSTRUCTED AND SHOULD BE EASILY
ACCESSIBLE DURING INTENDED USED.
CAUTION:
USE
OF
CONTROLS
OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION: DANGER OF EXPLOSION IF
BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR
2 EQUIVALENT TYPE.
DRC69707E RCA 3L MTK.indd 2
• Do not use the unit in places that are
extremely hot, cold, dusty or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by
placing it in a place with poor air flow,
by covering it with a cloth, or by placing
it on carpeting.
• To avoid magnetizing, do not place the
unit near speakers or magnets.
• Do not use this unit in direct sunlight or
leave the unit in a closed automobile (or
similar environments) where it would
be exposed to high temperatures above
104°F (40°C).
• No naked flame sources such as lighted
candles should be placed on the AC
power adapter or the main unit.
• The AC/DC adaptor and apparatus
should not be exposed to splashing or
dripping liquids, and no objects filled
with liquids, such as vases, should be
placed on the AC/DC adaptor and
apparatus.
• The apparatus should not be exposed
to dripping or splashing and that no
objects filled with liquids, such as vases,
should be placed on apparatus.
On Safety
• When connecting or disconnecting the
AC power adapter, grip the plug and
not the cord itself. Pulling the cord may
damage it and create a hazard.
• When you are not going to use the unit
for a long period of time, disconnect the
AC power adapter.
On Condensation
• When left in a heated room where
it is warm and damp, water droplets
or condensation may form inside the
unit. When there is condensation inside
the unit, the unit may not function
normally. Let the unit stand for 1 to 2
hours before turning the power on, or
gradually heat the room and allow the
unit to dry before use.
8/9/2011 14:34:23
Ventilation Warning
• Do not block the ventilation openings or
holes. If the ventilation openings or holes
are blocked by a newspaper or cloth, etc.,
the heat may not be able to get out.
• Do not operate the unit in a confined
space, such as a bookcase or built-in
cabinet. Allow about 4 inches (10cm)
of free space all around the unit for
adequate ventilation.
Notes on Copyright
It is forbidden by law to copy, broadcast,
show, broadcast on cable, play in public,
or rent copyrighted material without
permission.
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering
and disassembly are prohibited.
EN
Rating Plate Location
• The rating plate is located on the
bottom of unit.
This product
contains a low
power laser device.
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type. A
polarized power plug has two blades
with one wider than the other. A
grounding type power plug has two
blades and a third grounding prong.
The wide blade or the third prong is
provided for your safety. When the
provided power cord does not fit
into your AC power outlet, consult
an electrician for replacement of the
obsolete outlet.
10. Protect the AC power cord from being
walked on or pinched particularly
at the power plug, convenience
DRC69707E RCA 3L MTK.indd 3
receptacles, and the point where they
exit from the apparatus.
11. Only
use
attachments/accessories
specified by the manufacturer.
12.Use only with the
cart, stand, tripod,
bracket, or table
specified
by
the
manufacturer, or sold
with the apparatus.
Portable Cart
When a cart is
Warning
used, use caution
when moving the cart/apparatus
combination to avoid injury from tipover.
13.
Unplug
this
apparatus
during
lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as the AC power cord is
damaged, liquid has spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally,
or has been dropped.
3
8/9/2011 14:34:23
EN
FCC Statements
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
–Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
Warning: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
Disc Formats
Icons Used on DVDs
This DVD player can playback
Sample lcons
Language selections for audio
DVDs
[8cm(3")/12cm(5") disc]
Audio CDs
[8cm(3")12cm(5") disc]
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
Compatible
Region
Information
Management
Region Management Information: This
unit is designed and manufactured to
respond to the Region Management
Information that is encoded on DVDs. If
the region number printed on the DVD
does not correspond to the region number
of this unit, this unit cannot play that disc.
The region number of this unit is 1.
Disc Function or Operation that
is Not Available
Note:
When playing back a CD-G (Graphics) or
CD EXTRA disc, the audio portion will be
played, but the graphic images will not be
shown.
Titles, Chapters and Tracks
• DVDs are divided into “titles” and
“chapters”. If the disc has more than
one movie on it, each movie would be a
separate “title”. “Chapters” are sections
of titles.
• Audio CDs are divided into “tracks”. A
“track” is usually one song on an Audio
CD.
When the
symbol appears on the TV
screen, it indicates that the function or
operation attempted is not available at
that time. This occurs because the DVD
manufacturer determines the specific
functions. Certain functions may not be
available on some discs. Be sure to read
4 the documentation provided with the disc.
DRC69707E RCA 3L MTK.indd 4
8/9/2011 14:34:25
Note:
• Numbers identify each title, chapter,
and track on a disc. Most discs have
these numbers recorded on them, but
some do not.
Notes on Unauthorized Discs
You may not be able to play back some
DVDs on this unit if they were purchased
from outside your geographic area or
made for business purposes.
EN
Accessories
Please check and identify the supplied accessories.
Remote control (with battery)..........x 1
Car power adapter with splitter.......x 1
Straps..................................................x 2
Need more help?
Please visit online help at
www.RCAav.com
Remote Control
Using the Remote Control
• Point the remote control at the REMOTE
SENSOR located on the unit.
• When using this unit in very bright light,
the infrared REMOTE SENSOR may not
work properly.
Remove the plastic
sheet
before
operating the remote
control.
To change remote battery
1. Open the battery door. Battery Replacement
When the battery becomes weak, the
operating distance of the remote control
will be greatly reduced and you will need
to replace the battery.
Note:
If the remote control is not going to be
used for a long time, remove the battery.
WARNING:
Do not dispose of the battery in a fire or it
may leak and/or explode.
WARNING:
Batteries should not be exposed to
excessive heat such as sunshine, fire or the
like.
CAUTION:
• Danger of explosion if battery is
incorrectly replaced. Replace only with
the same or equivalent type.
2.Insert one CR2025 (3V) size battery.
5
DRC69707E RCA 3L MTK.indd 5
8/9/2011 14:34:25
Control Reference Guide
1) VIDEO MODE Button
Adjusts Brightness, Screen Size or
Contrast of the screen.
2)
PREV Button
Moves back through titles, chapters or
tracks on a disc.
3)
/
SEARCH Buttons
SEARCH: Fast reverse playback.
SEARCH: Fast forward playback.
4) GOTO Button
Skips directly to a location on a CD/
DVD.
5) Cursor ( , , , ) Buttons
Moves between selections on a menu
screen and adjusts certain settings.
ENTER Button
Confirms selections on a menu screen.
6) MEMORY Button
Sets titles/chapters in a favorite order.
7) Number (0 - 9) Buttons
Use when creating programs or
locating a title/chapter/track or specific
time.
8) REPEAT A-B Button
Performs
point-to-point
repeat
playback on a DVD or CD.
REPEAT DISC Button
Repeats a DVD chapter or title.
Repeats a CD track or the entire disc.
SETUP Button
In stop mode, it brings up the unit’s
SETUP menu.
9) MENU Button
Enters and exits the main DVD menu.
10)
NEXT Button
Skips to next titles, chapters or tracks
on a disc.
11) STOP Button
Stops playing a disc.
PLAY Button
Starts or resumes playback of a disc.
PAUSE Button
Press once to pause playback. Press
subsequently to advance frame by
frame on a DVD.
EN
12) DISPLAY Button
Shows status information on the
screen.
13) ANGLE Button
Switches between multiple camera
angles if applicable to the DVD.
14) AUDIO Button
Selects one of the audio sound
tracks on a DVD (if more than one is
available) or select the audio output
mode on a CD.
15) SUBTITLE Button
Selects one of the subtitle languages
programmed on a DVD (if available).
RETURN Button
Returns to normal operation after
using the SETUP menu of a DVD.
6
DRC69707E RCA 3L MTK.indd 6
8/9/2011 14:34:26
Control Reference Guide
DVD Player
1)
OPEN Button
Press the OPEN button and
hold the front panel to open
the disc door.
2) STANDBY(power off) / ON
Switch
3) Headphone Jack
4) VOLUME Control
Adjusts the volume.
5) AUDIO / VIDEO OUT Jacks
6) DC IN 9V-12V Jack
7) Remote Sensor
Receives the remote control
signal.
8) STOP Button
Stops playing a disc.
MENU Button
Accesses DVD Disc Menu if a
DVD disc is currently playing.
Accesses Setup menu if disc is
not playing.
PLAY/PAUSE Button
Starts or resumes playback of a
disc. Pressing during playback
of a disc will cause playback to
be paused.
SEARCH Button
Performs fast reverse during
CD/DVD playback. In DVD
menu, Setup menu or JPG
menu, press to scroll down.
1
2
EN
3
4
5
6
8
Monitor
9) Fn Button
Adjusts the monitor’s screen
brightness, contrast, color and mode
(16:9/4:3) or sets to default setting.
/ Buttons
Adjusts the volume.
Adjusts the settings (when 10
used with the Fn button).
10) Headphone Jack
11) ON / OFF Switch
12) DC IN 9V-12V Jack
13
13) Built-in AV cable
7
SEARCH Button
Performs fast forward during CD/DVD
playback. In DVD menu, Setup menu or
JPG menu, press to scroll up.
PREV Button
Goes backward to previous chapters/
titles/tracks. In DVD menu or Setup menu,
press to scroll left.
NEXT Button
Goes advance to next chapters/titles/
tracks. In DVD menu or Setup menu,
press to scroll right.
9
11
12
7
DRC69707E RCA 3L MTK.indd 7
8/9/2011 14:34:27
Power Supply
Using the car power adapter with splitter
The included 12V car power adapter allows the unit to be used with vehicles that have a
12V, negative ground electrical system.
DVD player
Monitor
EN
TO AV OUT
TO 9-12V
DC IN
TO 9-12V
DC IN
TO 12V power outlet
Built-in
AV cable
Car Power adapter
Fuse replacement instructions
WARNING:
Disconnect the car power adapter when
not in use. Not for use in 24V vehicles.
CAUTION:
• Use the provided 12V car power adapter
only. Use with other car power adapters
could damage the unit.
• The 12V car power adapter included
with this unit is for its use only. Do not
use it with other equipment.
• In the interest of traffic safety, do not
operate this unit or view videos while
driving a vehicle.
• Make sure the unit is securely fastened
to prevent it from falling or flying
through the air in the event of an
accident.
8
DRC69707E RCA 3L MTK.indd 8
Caution
For continued protection
against risk of fire, replace
only with same type and
rating of fuse.
• When the inside of the cigarette lighter
socket is dirty with ashes or dust, the
plug section may become hot due
to poor contact. Be sure to clean the
cigarette lighter socket before use.
• After use, disconnect the 12V car
power adapter from both the unit and
cigarette lighter socket.
8/9/2011 14:34:27
Connections
Connect with the Monitor
Connect the built-in AV cable to the DVD
Player.
DVD player
Monitor
Connect a Stereo Receiver or
Amplifier
The DVD player can play two channels
Dolby Digital.
Stereo Receiver /
Amplifier
EN
AUDIO IN
TO AUDIO
OUT
TO AV OUT
Built-in
AV cable
Connect a TV
If your TV has Audio/Video inputs, you can
connect the DVD player to your TV using a
standard AV cable (not included).
TV
VIDEO
IN
TO AV
OUT
AUDIO
IN
AV cable
(not included)
Watching a DVD on your TV
1. Turn on the unit.
2.
Turn on the TV and follow the
instructions included with it to watch
video from external sources.
Audio cable
(not included)
Listening on External Audio Equipment
1. Connect the DVD player to the left/right
Audio In jacks on the other equipment
using a standard Audio cable (not
included).
2.Turn on your audio equipment and
follow the instructions provided with it
to select the AUDIO IN function.
Note:
• Make sure to use the correct Audio
cable. Connecting the plugs incorrectly
may cause a weak signal.
• If you have a stereo VCR, make sure you
set it to stereo mode.
• Due to copyright protection, DVD
movies cannot be copied. If you copy
a DVD movie onto a videotape, the
resulting copy will be unclear, with poor
sound quality. This is NOT caused by a
defective DVD system.
Using headphones/earphones
Turn down the volume before connecting
the headphones/earphones. Slowly raise
the volume with the headphones on until
you reach your desired volume. When
headphones are connected, the speaker is
automatically disabled.
DRC69707E RCA 3L MTK.indd 9
WARNING:
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Avoid listening to sound at excessive levels
which could be harmful to your ears.
9
8/9/2011 14:34:28
Placement
Mounting in the vehicle
Use the supplied mounting straps to install the DVD Player and the monitor on the back
of the vehicle's headrests. Tightly wrap the mounting straps around the headrest.
Mounting the DVD Player
Mounting
strap
EN
Mounting
strap
Mounting the Monitor
Mounting
strap
Mounting
strap
DVD Player
Monitor
Mounting
Straps
Built-in
AV cable
Car Power Adapter
with splitter
Remote
Control
10
SAFETY WARNING!
• This unit should never be used by the
vehicle's driver or left unsecured in the
vehicle while driving.
• If this unit is being used in your vehicle,
be sure that it is secured or held safely,
and does not obstruct any safety device,
DRC69707E RCA 3L MTK.indd 10
including air bags or seat belts.
• All passengers should wear seat belts
when using this unit in a moving vehicle.
• If in doubt, please contact your vehicle
manufacturer for further advice.
8/9/2011 14:34:30
Unit Operation
Turning the unit on
1.Slide the STANDBY / ON switch on the
DVD player to the ON position. Slide the
ON / OFF switch on the monitor to the
ON position.
2.The start-up picture will appear on the
screens.
3.After use, slide the STANDBY / ON switch
on the DVD player to STANDBY (power
off). Slide the ON / OFF switch on the
monitor to the OFF position.
EN
Playing a Disc - Basic Functions
This owner’s manual explains the
basic instructions for operating this
unit. Some DVDs are produced in a
manner that allows specific or limited
operation during playback. Therefore,
this unit may not respond to all
operating commands. THIS IS NOT A
DEFECT. Please refer to the instructions
accompanying the specific DVD in
question for more information about
the options available on that DVD.
“
” may appear on the screen
during operation. A “
” means that
the desired operation is not permitted
by the unit or disc.
Playing a Disc
1.Slide the STANDBY/ON switch to the ON
position. (Slide the ON/OFF switch on
the monitor to the ON position.)
See CUSTOMIZING THE DVD FUNCTION
SETTINGS before proceeding to step 2.
2.Press the
button and hold the front
panel to open the disc door.
3.Hold the disc by its edge and gently
push it onto the spindle, with the label
side facing the front, until you hear a
“click”.
4.Push the disc door gently to close it. It
takes a short while for your unit to load
the disc. After loading, for most DVDs,
the unit will automatically take you
main menu of the DVD or start playing
the DVD.
5.If the unit does not automatically start
playing the DVD, press the
PLAY
button on the remote control or
button on the unit.
Pausing Playback (Still Mode)
Press the
PAUSE button. To resume
normal playback, press the PLAY button
on the remote control or
button on the
unit.
For a DVD, each time you press the PAUSE
button, the picture advances one frame.
Stopping Playback
Press the
STOP button at the location
where you want to interrupt playback. To
resume playback at the position where the
disc was stopped, press the PLAY button
on the remote control or
button on the
unit.
If you press the STOP button twice, the
unit’s memory will be cleared and pressing
the PLAY button on the remote control
or
button on the unit will reset the disc
to the beginning.
Fast Forward/Fast Reverse
1.Press the SEARCH
or SEARCH
button when a disc is playing. Each time
the SEARCH
/
button is pressed,
the playback speed changes in the
following sequence:
2.Press the PLAY button on the remote
control or
button on the unit when
you have reached the desired point to
resume playback at normal speed.
11
DRC69707E RCA 3L MTK.indd 11
8/9/2011 14:34:30
Notes:
• The DVD player mutes sound and
subtitles during reverse and forward
scan of DVDs.
• The fast playback speed may differ
depending on the disc.
Skip (Forward / Reverse)
EN
• Press the
NEXT button to advance
titles, chapters/tracks.
• Press the
PREV button to go back
to current or previous titles, chapters/
tracks.
• For an Audio CD, use the number
buttons on the remote control to go
directly to the desired track number.
Audio Selection
On some DVDs, the sound is recorded in
two or more formats. Follow the directions
below to select the preferred language
and sound system.
1.Press AUDIO button once will switch to
next audio format number.
2.Press the AUDIO button repeatedly to
select the desired audio format.
Note:
• If only one audio format is recorded on
the DVD, the number does not change.
• Some DVDs allow you to change audio
selections using the disc menu only. If
this is the case, press the MENU button
and choose the appropriate language
on the disc menu.
• You can select different audio channels
(Stereo, Mono Left, Mono Right or MixMono) on an Audio CD by pressing the
AUDIO button repeatedly.
Subtitle Selection
1. While a DVD is playing, press the Subtitle
button, it will show the next subtitle.
2.Press the SUBTITLE button repeatedly
to select the desired subtitle language.
You can turn subtitles off by pressing
the SUBTITLE button repeatedly until
the
is displayed.
Note:
• Some DVDs are set to display subtitles
automatically, and you cannot turn
them off even if you set the subtitle
function to off.
• During some scenes, the subtitles may
not appear immediately after you select
your desired scene.
• The number of subtitle languages
recorded differs depending on the disc.
If only one language is recorded, the
language does not change.
• This function can only be used for discs
on which subtitles have been recorded
in multiple languages.
• Some DVDs allow you to change
subtitles using the disc menu only. If this
is the case, press the MENU button and
choose the appropriate subtitle on the
disc menu.
Angle Selection
Some DVDs contain scenes that have been
shot from a number of different angles. For
these discs, the same scene can be viewed
from each of these different angles.
1.While you are playing a DVD with
different angles recorded, press the
ANGLE button to view the number of
current angles available.
2.Press the ANGLE button repeatedly to
change the scene to the next recorded
angle.
• After approx. two seconds, playback will
continue from the new angle selected.
• If no button is pressed within 10 seconds,
playback continues without changing
the current angle.
Note: This function can only be used for
discs on which scenes shot from multiple
angles have been recorded.
12
DRC69707E RCA 3L MTK.indd 12
8/9/2011 14:34:30
Display function (DVD)
While the disc is
playing, press the
DISPLAY button
repeatedly
to
display
information on
operation status:
Adjust the LCD screen
For the DVD player, you can adjust brightness,
screen size and contrast of the screen.
1. Press the VIDEO MODE button.
2. Press the or button to select brightness,
screen size or contrast.
3.Then press the
or
to change the
setting.
4. Press the VIDEO MODE button again to exit
the menu.
For the monitor, you can adjust brightness,
contrast, color, mode (16:9/4:3) or default of
the screen.
1.Press the Fn button repeatedly to select
brightness, contrast, color, mode or default.
2. Then press the or button to change the
setting.
3. Press the Fn button again to exit the menu.
EN
Repeat Playback
You can play a specific DVD title or chapter
repeatedly (title repeat, chapter repeat,
A-B repeat).
Repeating a Chapter
1.While the DVD is playing, press the
REPEAT DISC button until the
indicator displays on the screen. The
current chapter is played repeatedly.
Repeating a Title
2.While the DVD is playing, press the
REPEAT DISC button until the
indicator displays on the screen. The
current title is played repeatedly.
To Resume Normal Playback
3.While the DVD is playing, press the
REPEAT DISC button until the
indicator displays on the screen.
Repeating a Single Track
You can play a single CD track or the whole
disc repeatedly.
1.
While the CD is playing, press the
Track
REPEAT DISC button until the
indicator displays on the screen. The
current track is played repeatedly.
Repeating the Whole Disc
2.
While the CD is playing, press the
All
REPEAT DISC button until the
indicator displays on the screen. The
whole disc is played repeatedly.
DRC69707E RCA 3L MTK.indd 13
To Resume Normal Playback
3.
While the CD is playing, press the
REPEAT DISC button until the
indicator displays on the screen.
Repeating a Specific Section
You can play a specific section repeatedly.
1.While the disc is playing, press the
REPEAT A-B button at the beginning
of the section (
is displayed) you
want to play repeatedly.
2. Press the REPEAT A-B button again at the
end of the section (
is displayed).
3.
The unit will immediately begin
replaying your selection.
To Resume Normal Playback
4.While the disc is playing, press the
REPEAT A-B button until the
indicator displays on the screen (the
repeat indicator disappears from the
screen for a CD). The system will return
to normal playback.
Note:
• Some discs may not permit A-B repeat
operation.
• You can specify a segment only within
the current title or track.
• There may be a slight difference
between point A and the location where
playback actually resumes depending on
the disc.
13
8/9/2011 14:34:32
Locating a Desired Section
Locating a Specific Chapter/Title
If you know the chapter/title number for the
chapter/title that you want to play, you can
locate it by directly selecting that number.
1.Press the GOTO button.
Locating a Specific Time
You can move to a specific location by
entering its corresponding time (hours,
minutes, seconds).
1.Press the GOTO button two times.
/
EN
2. Press the / button to highlight chapter/
title number, then press the corresponding
number buttons (2 digits) for the chapter/
title you want (for example: 02, 08, 10 or
15). If you press only 1 numeric button,
press the ENTER button to confirm.
3.Playback starts from the selected chapter/
title.
Note:
• If entered is not permitted chapter, it
will jump to the last chapter and play. If
entered is not permitted title by the DVD,
will dispaly. Repeat steps 1
and 2 to re-enter the correct number.
• Some discs may not respond to this
process.
• This method of locating a chapter/title
is available only on a DVD that contains
chapter/title numbers.
2.Press the corresponding number buttons
(5 digits: X:XX:XX, for example: 0 30 05,
1 08 23, 1 22 56) for the setting point
you want.
3.Playback starts from the selected section.
Note:
• If the time entered is not permitted by
the DVD,
will display.
You should re-enter the correct time.
• Some discs may not respond to this
process.
• Some scenes may not be located as
precisely as you specified.
• This method for accessing specific
locations is available only within the
current title of the DVD.
Viewing JPG Files
This unit can play JPG files recorded on
a CD-R or CD-ROM disc (CD-RW is not
recommendable).
Viewing JPG Files
1. Open the disc door.
2. Hold a JPEG file disc by its edges and
gently push it onto the spindle with
the label side facing up until you hear
a “click”.
3.Close the disc door. The JPEG files on
the disc will be displayed one by one
automatically. If the disc does not play
automatically, press the PLAY button
on the remote control or
button on
the unit.
4.Press the MENU or
STOP button to
display a folder list. Press the
/
button to highlight a JPEG file to play.
Press the
PLAY button on the remote
control or
button on the unit to start
playback.
14
DRC69707E RCA 3L MTK.indd 14
8/9/2011 14:34:33
Note:
• You can press the
PAUSE button to
freeze the picture. Press the
PLAY
button on the remote control or
button to resume picture slide show.
• You can press the STOP button to quit
playback.
• You can press the
PREV or
NEXT
button to change the picture.
• You can press the ANGLE button on the
remote control to rotate direction of the
picture by 90°.
• Some discs may not permit this
operation.
EN
Programmable Memory
You can combine your favorite titles/
chapters and play them in the order you
determine.
1. Press the MEMORY button while a
DVD is playing. The following display
appears.
Clear: Exit: Delete all the input programs.
Exit memory menu and return to normal
playback.
Start: Start memory playback.
Next / Prev: Move to the next / previous setup page.
2. Input the title (2 digits) and chapter (2
digits) by pressing the number buttons.
(For example: 01 02, 02 05, 02 11.) It will
move to the next item automatically.
• You can use the Cursor buttons ( , ,
, ) to move the highlighted bar to any
item, and re-enter the title and chapter.
(Press the
NEXT /
PREV to move to
the next / previous setup page.)
• You can use the Cursor buttons ( ,
, , ) to move the highlighted bar to
“Clear”, “Exit”, “Start” or “Next / Prev”,
and press the ENTER button to confirm.
3. Press the PLAY button to start memory
playback. (“
” appears on the
screen.)
4. To resume normal playback from
memory playback
• Press the MEMORY button to display the
memory menu.
• Use the Cursor buttons ( , , , ) to
move the highlighted bar to “Stop”.
Press the ENTER button to confirm
“Stop”.
• Use the Cursor buttons ( , , , ) to
highlight “Clear”, and then press the
ENTER button to confirm.
• Use the Cursor buttons ( , , ,
) to highlight “Exit”, and then press
the ENTER button to confirm. It will
return to normal playback (“
”
disappear from the screen.)
Note:
• If the title or chapter number entered
is not permitted by the DVD, it will
disappear. You should re-enter correct
number.
• You should input items one by one
following the 1, 2, 3 ... sequence.
• If the DVD contains only one title, you
can only arrange order for chapters.
• Some discs may not permit memory
playback operation.
• If you select repeat during memory
playback, the DVD player repeats the
current memory playback.
• The programmed selections will be
cleared when you press the
STOP
button two times, open the disc tray or
turn off the DVD player.
15
DRC69707E RCA 3L MTK.indd 15
8/9/2011 14:34:34
Customizing the DVD Function Settings
Language Setup
EN
1.Press the SETUP button on the remote
control or MENU button on the unit in
stop mode (when disc is not playing).
2.Press the
button to select Language
Menu.
3. Use the or button to select the option
(Player Menu, Audio, Subtitle or Disc
Menu), then press the button.
4.Use the
or
button to select your
preferred language, then press the ENTER
button to confirm.
5.Press the
button to go back to the
previous menu. Repeat steps 3 and 4 to
adjust other options.
6.To exit the SETUP MENU and return to the
normal screen, press the RETURN or SETUP
button.
2.Press the
or
button to select Video
Menu.
3. Use the or button to select the option
(Brightness or Contrast), then press the
button.
4.Use the
or
button to make adjust
the setting, then press ENTER button to
confirm.
5.Repeat steps 3 and 4 to adjust other
options. Press the
button to return to
the previous menu.
6.To exit the SETUP MENU and return to the
normal screen, press the RETURN or SETUP
button.
Video Menu
Language Menu
Player Menu
Video Menu
System Setup
Language Menu
Note:
• Some DVDs may not play in the audio
language selected. A prior language may
be programmed on the disc.
• Some DVDs may be set to display subtitles
in a language other than the one
selected. A prior subtitle language may be
programmed on the disc.
• Some DVDs allow you to change subtitle
selections via the disc menu only. If this
is the case, press the MENU button and
choose the appropriate subtitle from the
selection on the disc menu.
• Some DVDs may not included your preselected language. In this case, the DVD
player automatically displays disc menus
consistent with the disc’s initial language
setting.
1.Press the SETUP button on the remote
control or MENU button on the unit in
stop mode (when disc is not playing).
2.Press the
or
button to select System
Menu.
3. Use the or button to select the option
(Tv Display or Default), then press the
button.
4.Use the
or
button to adjust the
settings, then press ENTER button to
confirm.
5. Repeat steps 3 and 4 above to adjust other
options. Press the
button to return to
the previous menu.
6.To exit the SETUP MENU and return to the
normal screen, press the RETURN or SETUP
button.
System Menu
Video Setup
1.Press the SETUP button on the remote
control or MENU button on the unit in
stop mode (when disc is not playing).
System Menu
16
DRC69707E RCA 3L MTK.indd 16
8/9/2011 14:34:35
TV Display
Pan Scan
• When wide-screen video is played, this
mode clips the right and left sides of
the image so that it can be viewed on a
conventional screen.
• Some wide-screen DVDs that do not
permit Pan Scan mode playback are
automatically played in letterbox mode
(black bands that appear at the top and
bottom of the screen).
Letter Box
• When wide-screen video is played in this
mode on a conventional screen, black
bands appear at the top and bottom of
the screen.
Wide Screen
• This is the correct mode for playing
wide-screen videos on the unit screen or
other external wide-screens.
Note:
• The displayable picture size is preset on
the DVD. Therefore the playback picture
of some DVDs may not conform to the
picture size selected.
• When you play DVDs
recorded in the 4:3
aspect
ratio,
the
playback picture will
always
appear
in
the 4:3 aspect ratio
regardless of the TV
display setting.
• Select Wide Screen
to conform the LCD
screen on the unit.
Always be sure that
your
TV
display
conforms
to
the
actual TV in use if you
connect the unit to a
TV.
Cut off when a
wide-screen video
image is played
Pan Scan
EN
Letter Box
Default
Wide Screen
It takes 3-5 seconds to
reset the DVD settings
to the factory default.
Troubleshooting
No power
• Ensure the car power adaptor is
connected.
• Make sure that the unit is turned on.
The remote control does not
function
• Make sure the infrared remote sensor is
not blocked.
• Make sure the plastic sheet has been
removed from the remote control.
• Point the remote directly at the infrared
remote sensor on the unit.
• Replace the battery in the remote
control with a new one.
No Sound or only a very lowlevel sound is heard
• The volume control is located on the
side of the unit - please try adjusting
this.
• The unit is in pause mode. Press the
PLAY button to return to normal play
mode.
• The unit is in fast-forward or fast-
DRC69707E RCA 3L MTK.indd 17
reverse mode. Press the
PLAY button
to return to normal play mode.
• Make sure the AUDIO/VIDEO output
connections are correct.
• The DTS DVD cannot be decoded to
have speaker output.
• The unit is too hot, shut off the unit for
30 minutes to cool it down.
No picture
• The region number of the disc doesn’t
match the region number of this unit.
The picture is not clear
• Clean the disc.
• The disc is scratched.
• Adjust the LCD’s brightness and contrast
using the VIDEO MODE button on the
remote control.
Loud hum or noise is heard
• The plugs and jacks are dirty. Wipe them
with a cloth slightly moistened with
alcohol.
17
8/9/2011 14:34:35
• Clean the disc.
The disc does not play
• There is no disc inside the unit (“No
Disc” appears on the screen).
• Insert the disc correctly with the graphics
facing up.
• Clean the disc.
EN
• A non-NTSC disc has been inserted, or
the disc region number does not match
the region number of the unit.
• Condensation may have formed inside
the unit due to a sudden change in
temperature. Wait about an hour for it
to clear and try again.
Maintenance
Cleaning the Disc
A defective or soiled disc inserted into the
unit can cause sound to drop out during
playback.
Handle the disc by holding its inner and
outer edges.
• Do
NOT
touch
the surface of the
unlabeled side of
the disc.
• Do NOT stick paper
or tape on the surface.
• Do NOT expose the disc to direct sunlight
or excessive heat.
• Clean the disc before playback. Wipe
the disc from the center outward with a
cleaning cloth.
• NEVER use solvents such as benzine or
alcohol to clean the disc.
• Do NOT use irregular shaped discs
(example: heart shaped, octagonal,
etc.). They may cause malfunctions.
Cleaning the Unit
• Be sure to turn the unit off and
disconnect the power source before
maintaining the unit.
• Wipe the unit with a dry soft cloth. If
the surfaces are extremely dirty, wipe
clean with a cloth that has been dipped
in a weak soap-and-water solution and
wrung out thoroughly. Then wipe with
a dry cloth.
• Never use alcohol, benzine, thinner,
cleaning fluid or other chemicals. Do
NOT use compressed air to remove dust.
IMPORTANT NOTE
Before transporting the unit, remove any
disc from the disc compartment.
Sound System
Dolby Digital
Dolby Digital is a technology developed by
Dolby Laboratories. Soundtracks encoded
in Dolby Digital can reproduce from one to
5.1 discrete channels of excellent quality
audio.
The unit automatically recognizes the
Dolby Digital bitstream and provides
a downmix suitable for two-channel
listening. An additional Dolby Digital
decoder is required for reproduction of
the discrete multi-channel soundtracks
available on many DVDs.
Manufactured under license from Dolby
Laboratories.
Dolby and the double-D
symbol are trademarks
of Dolby Laboratories.
Need more help?
Please visit online help at
www.RCAav.com
18 Specifications and external appearance are subject to change without notice.
DRC69707E RCA 3L MTK.indd 18
8/9/2011 14:34:35
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited warranty extend to
the original consumer purchaser and is limited to non-commercial use of the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to be free from defects in materials or
workmanship for a period of one year from the date of their original retail purchase. If the unit fails
to conform to this warranty, we will service the product using new or refurbished parts and products,
at AVC’s sole discretion.
During a period of one year from the effective warranty date, AVC will provide, when needed,
service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty
service in the United States, you must first call our Customer Support Center at 1-800-506-5746
or 1-877-252-6873, during the hours listed in the box below. The determination of service
will be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT
PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will
be used for repairs by AVC at its designated Service Center for one year from the effective warranty
date. Such replacement parts or products are warranted for an additional one year from the date
of repair or replacement. The Customer will be required to ship the unit to the Service Center
indicated at the time Customer Support is contacted to make the necessary repairs. The customer is
responsible for all transportation charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original carton box and
packing material or an equivalent as designated by AVC.
EN
LIMITED WARRANTY
Your Responsibility
(1) You must retain the original sale receipt to provide proof of purchase.
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or
Canada.
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product
or parts which have been lost or discarded, or damage to product or parts caused by misuse, accident,
improper operation or maintenance, or use in violation of instructions provided with the product, or
to product which has been altered or modified without authorization of AVC, or to products or parts
thereof which have had the serial number removed or changed.
Out of Warranty
In the event your product requires repair after the limited warranty period has expired, please contact
our Customer Support Center at 1-800-506-5746, 1-877-252-6873 or www.RCAav.com
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.
Important: You are responsible for any transportation, shipping or insurance relative to the return of
product to our Product Returns Center.
All warranties implied by state law, including the implied warranties of merchantability and fitness
for a particular purpose, are expressly limited to the duration of the limited warranties set forth
above. With the exception of any warranties implied by state law as hereby limited, the foregoing
warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar
obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no
event shall AVC be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the
terms of these warranties in any manner whatsoever. The time within action must be commenced to
enforce any obligation of AVC arising under the warranty or under any statute, or law of the United
States or any state thereof, is hereby limited to one year from the date of purchase. This limitation
does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary, from
state to state. Some states do not allow limitation on how long an implied warranty lasts, when an
action may be brought, or the exclusion or limitation of incidental or consequential damages, so the
above provisions may not apply to you.
For more information on other products and services, please visit our web site at www.RCAav.com.
Important: Also keep your “Bill of Sale” as proof of purchase.
Serial no................................................................. Invoice no....................................................................
Date purchased..................................................... Dealer name ...............................................................
FOR SERVICE AND REPAIR, PLEASE VISIT www.RCAav.com
DRC69707E RCA 3L MTK.indd 19
19
8/9/2011 14:34:36

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project