PRODUCT BULLETIN 2482 16-Channel 125 VDC Input Module Isolation: 1500 VDC channel to backplane 1500 VDC channels in groups of four to channel Environment Backplane Loading: 0.50 Watt @ 25°C Removable Connector: Accepts 14 to 22 AWG Operating Temperature: 0° to 60°C (32° to 140°F) Storage Temperature: -40° to 85°C (-40°F to 185°F) Humidity, Relative: 5% to 95% (non-condensing) Agency Approvals: UL, UL for Canada FM (Class I, Div 2) Shipping Weight: 1 lbs (0.45 kg) Typical Input Circuit Description The Model 2482 accepts 16 points of discrete 125 VDC inputs to the 405 I/O base. The module is designed to accommodate the broad range of DC inputs (90-146 VDC) commonly found in power utility substations. Features • • • • Wiring 16 points isolated in groups of four Plugs directly into 405 Series I/O base Responds to standard SIMATIC TI input instructions 16 individual status LED indicators Specifications Input Information: Number of Input Points: 16 Input Voltage: 90 to 146 VDC Maximum Voltage: 180 VDC Minimum Voltage: 80 VDC Minimum Input Current: 0.5 mA Maximum Input Current: 2 mA Turn ON Time: 25 µSec nominal Turn OFF Time: 25 µSec nominal Off State at 24 VDC or less Sinking Inputs: Commons are negative Input Impedance: 150 KW Control Technology Inc. • 5734 Middlebrook Pike • Knoxville, TN USA 37921 • [email protected] • 1-800-537-8398 2482pb.pm5 P/N 062-00116 Rev 1.1 120198 Model 2482 LIMITED PRODUCT 16-Channel 125 VDC Input Module WARRANTY CTI warrants that this CTI Industrial Product shall be free from defects in material and workmanship for a period of one (1) year after purchase from CTI or from an authorized CTI Industrial Distributor. This CTI Industrial Product will be newly manufactured from new and/or serviceable used parts which are equal to new in the Product. Should this CTI Industrial Product fail to be free from defects in material and workmanship at any time during this one (1) year warranty period, CTI will repair or replace (at its option) parts or Products found to be defective and shipped prepaid by the customer to a designated CTI service location along with proof of purchase date and associated serial number. Repair parts and replacement Product furnished under this warranty will be on an exchange basis and will be either reconditioned or new. All exchanged parts or Products become the property of CTI. Should any Product or part returned to CTI hereunder be found by CTI to be without defect, CTI will return such Product or part to the customer. This warranty does not include repair of damage to a part or the Product resulting from: failure to provide a suitable environment as specified in applicable Product specifications, or damage caused by an accident, disaster, acts of God, neglect, abuse, misuse, transportation, alterations, attachments, accessories, supplies, non-CTI parts, non-CTI repairs or activities, or to any damage whose proximate cause was utilities or utility like services, or faulty installation or maintenance done by someone other than CTI. Control Technology Inc. reserves the right to make changes to the Product in order to improve reliability, function, or design in the pursuit of providing the best possible Product. CTI assumes no responsibility for indirect or consequential damages resulting from the use or application of this equipment. THE WARRANTY SET FORTH ABOVE IN THIS ARTICLE IS THE ONLY WARRANTY CTI GRANTS AND IT IS IN LIEU OF ANY OTHER IMPLIED OR EXPRESSED GUARANTY OR WARRANTY ON CTI PRODUCTS, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE AND IS IN LIEU OF ALL OBLIGATIONS OR LIABILITY OF CTI FOR DAMAGES IN CONNECTION WITH LOSS, DELIVERY, USE OR PERFORMANCE OF CTI PRODUCTS OR INTERRUPTION OF BUSINESS, LOSS OF USE, REVENUE OR PROFIT, IN NO EVENT WILL CTI BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. REPAIR POLICY In the event that the Product should fail during or after the warranty period, a Return Material Authorization (RMA) number can be requested verbally or in writing from CTI main offices. Whether this equipment is in or out of warranty, a Purchase Order number provided to CTI when requesting the RMA number will aid in expediting the repair process. The RMA number that is issued and your Purchase Order number should be referenced on the returning equipment's shipping documentation. Additionally, if under warranty, proof of purchase date and serial number must accompany the returned equipment. The current repair and/or exchange rates can be obtained by contacting CTI at 1-800-537-8398. When returning any module to CTI, follow proper static control precautions. Keep this module away from polyethelene products, polystyrene products and all other static producing materials. Packing the module in its original conductive bag is the preferred way to control static problems during shipment. Failure to observe static control precautions may void the warranty. For additional information on static control precautions, contact CTI at 1-800-537-8398.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project