Grill Body Instruction Sheet
Gravity Fed Grill CGP24G1D
CAUTION
• Always remove plug from outlet before servicing your grill.
• Make sure your grill has fully cooled to avoid burns.
• Some components may have sharp edges. Use caution to avoid injury.
9804190116 210715-GH
Disassembly
2
1
Power cord
Remove the meat probe.
3
Unplug the four cords from the back of the digital control panel.
4
Remove warming racks and grease tray.
Remove grill grates.
6
5
Remove bottom tray assembly.
Loosen the screws in the side of the grill that are holding the
shelf in place. Pull the shelf up off the screws to remove it.
Disassembly
8
7
Remove heat manifold support.
Slide the manifold away from hopper and remove it.
10
9
Remove intake slides.
Remove hopper lid and latch.
12
11
Remove hopper door assembly.
Remove the ash tray and charcoal grate.
Disassembly
14
13
Remove the bottom front heat shield.
Remove bottom rear heat shield.
15
16
Disconnect hopper and fan wires.
Remove the 2 screws from the bottom of the hopper.
18
17
Remove top hopper heat shield.
Remove the hopper.
Disassembly
20
19
Remove the leg and shelf assembly.
Remove the grill lid assembly.
Assembly
1. Screw the lid onto the body (see step 22).
2. Screw in the leg assembly to the new grill body (see step 21).
3. Screw in the hopper to the grill’s body using four (4) screws (see step 20).
4. Screw in the top hopper heat shields to the main body of the hopper using M4x10 screws (see step 19).
5. Attach hopper cart support (see step 18).
7. Re-connect hopper and fan wires (see step 15).
8. Screw in top and bottom heat shield screws. Slide bottom heat shield under top heat shield (see step 14).
9. Screw in bottom rear heat shield (see step 13).
10. Replace the ash tray and charcoal grate (see step 12).
11. Attach the hopper door assembly and insert the intake slides (see steps 10 and 11).
12. Attach the hopper lid and latch (see step 9).
13. Screw in the heat manifold support and install the heat manifold (see steps 7 and 8).
14. Re-Install the side shelf (see step 6).
15. Replace the bottom tray, grill grates, warming racks, and grease tray (see steps 3,4, and 5).
16. Re-connect the four wires from the grill to the back of the digital control panel (see step 2).
17. Replace the meat probe (see step 1).
Rest assured, we’re here to help.
Rassurez-vous, nous sommes là pour vous aider.
Tenga la seguridad de que estamos aquí para ayudarle.
Customer Service
Service à la clientèle
Servicio de atención al cliente
masterbuilt.com/contact-us
masterbuilt.com/warranty
masterbuilt.com/collections/parts
@masterbuilt
masterbuilt.com
">