Tamarack Multi Mount Rafter Instruction manual
Below you will find brief information for Rafter Mount 90231. This mount is designed for attaching to rafters on composite shingle roofs. It includes a 9 x 11-inch aluminum flashing and lag bolts for secure installation. The L-foot mount is sold separately.
Advertisement
Advertisement
Advertisement
Key features
- Designed for composite shingle roofs
- 9 x 11-inch black aluminum flashing
- Includes lag bolts and sealing washer
- Alignment notches for easy installation
- Durable and weather resistant
Frequently asked questions
Approximately 3 inches below the edge of the shingle row above the mounting point, over the center of a rafter.
A 17/64-inch pilot bit.
A sealant approved by the manufacturer of the roofing material.
8 mounts
4 x 5/16-inch lag bolts