American Standard 221DA.004.021 Colony Round Front 12 Inch Rough- In 1.6 gpf Toilet Spec Sheet
Below you will find brief information for toilet Colony 221DA.004, toilet Colony 3251D.101, toilet Colony 4192A.004, toilet Colony 4192A.064, toilet Colony 4192A.005. The Colony is designed to be rough-in at a minimum dimension of 305mm from finished wall to C/L of outlet. It features a PowerWash® rim that scrubs the bowl with each flush. It also includes color match bowl caps and has a 2-year warranty.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
COLONY
®
ROUND FRONT 12" ROUGH TOILET
VITREOUS CHINA
COLONY ® ROUND FRONT 12" ROUGH TOILET
❏ 221DA.004
• Vitreous china
• Low consumption (6.0 Lpf/1.6 gpf)
• PowerWash ® rim scrubs bowl with each flush
• Includes color match bowl caps
• 2" flush valve
• 2" trapway
• 12" (305mm) rough-in
• Generous 9" x 8" water surface area
• Color matched trip lever is supplied
• 2 year warranty
❏ 3251D.101 Round Front Bowl
❏ 4192A.004 Tank
Nominal Dimensions:
706 x 488 x 746mm
(27-13/16" x 19-3/16" x 29-3/8")
Fixture only, seat and supply sold separately
23mm (7
FINISHED WALL
706mm
(27-13/16")
207mm
(8-1/8)
419mm
(16-1/2")
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
488mm
(19-3/16")
356mm
(14")
746mm
(29-3/8")
381mm
(15")
SUPPLY
AS
REQ'D
* 254mm
(10")
Alternative Tank Configurations Available:
❏ 4192A.064 Tank complete with tank cover
locking device
❏ 4192A.005 Tank complete with trip lever located
on right side
180mm
(7-1/8")
305mm
(12")
329mm
(12-15/16")
C/L OF OUTLET
FINISHED
FLOOR
* 152mm
(6")
239mm
(9-3/8")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous
China Fixtures
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5322.011 "Rise and
Shine" solid plastic closed front round seat with cover
❏ Supply with stop:
K48
© 2014 AS America Inc.
Rev 1/14
advertisement
Key Features
- Low consumption
- PowerWash® rim
- Color match bowl caps
- 2" flush valve
- 2" trapway
- 12" rough-in
- Generous 9" x 8" water surface area
- Color matched trip lever
- 2 year warranty