I

mprove on-time performance

with the Opticom

™

Infrared System.

Opticom

™

Infrared System

Now with the power-efficiency and longevity of LED

On-time reliability is critical to building ridership on public transit systems. That’s why so many communities are looking to Transit Signal

Priority (TSP) with the Opticom™ Infrared System. The green light advantage provided by the Opticom system can give your buses the natural, non-disruptive tool they need to stay right on schedule. And the Opticom system can bring you the value of bus rapid transit with minimal impact on traffic. The Opticom system can also help reduce fuel and maintenance costs by minimizing stop-and-go driving.

A key component of the Opticom system is coded infrared emitters, mounted on your transit vehicles, that communicate with intersection signal light controllers. Traditionally, these emitters have operated with conventional strobe technology. The new Opticom™ Infrared

System Model 794T LED Emitter features LED technology, a far more power-efficient and durable method for transmitting coded information to intersections.

Two technological advances improve the operation of your Opticom ™ Infrared System.

Opticom

™

Model 794T LED Emitter

Manufactured by a leader in transit signal priority, the Opticom 794T

LED emitter is the most advanced infrared emitter available today.

It is designed to use far less power and last significantly longer than conventional strobe-based emitters.

• High-efficiency LEDs require up to 90% less electrical power than conventional emitters, conserving power for other onboard equipment.

• LED technology provides a higher level of consistent performance over the life of the emitter.

• Optional visible indicator lights provide operational status and advanced diagnostic information.

• Designed to replace Opticom 792T emitters—no need to rewire or change mounting.

• Provides transit signal priority to all intersections equipped with

Opticom infrared systems.

• Coded signal transmissions allow traffic officials to manage, track and control usage of the Opticom system and to block unauthorized vehicles from using it.

• Built-in power supply simplifies installation.

• Performance range up to 2,500 feet.

Opticom

™

Model RC790 Remote Coding Unit

Engineered to work with Opticom 794T emitters, this GTT innovation eliminates having to access hard-to-reach emitters to change configuration or vehicle codes. Use the RC790 to reach the following modes:

• Class and ID to program and verify coding

• Disable to select latching or non-latching

• Defaults to ensure proper settings

• Diagnostics for troubleshooting and maintenance

• Visible LED to vary emitter appearance

The 794T LED emitter uses up to 90% less electrical power than conventional strobe emitters, conserving power in your vehicle for other uses.

The RC790 remote coding unit eliminates having to access hard-to-reach emitters to change configuration or vehicle codes.

For more information on these or other GTT products, visit our website, contact your GTT systems consultant, or call 1-800-258-4610. www.gtt.com

Global Traffic Technologies, LLC

7800 Third Street North

St. Paul, Minnesota 55128-5441

1-800-258-4610

651-789-7333 www.gtt.com

Global Traffic Technologies Canada, Inc.

157 Adelaide Street West

Suite 448

Toronto, ON M5H 4E7

Canada

1-800-258-4610

Opticom and the GTT logo mark are trademarks of

Global Traffic Technologies, LLC.

Please recycle. Printed in U.S.A.

© Global Traffic Technologies, LLC 2009

All rights reserved.

79-1000-0361-0 (A)