Smays Ethernet Adapter User Guide

SMAYS
Setup
1. Connect Fire TV Stick to your TV’s HDMI port.
2. Connect the LAN adapter’s Micro USB connector into TV Stick, the LED indicator is
on.
3. Connect network cable to RJ45 port of this Ethernet adapter, the LED indicator in
working status (sparkle).
4. Plug DC Cable into Ethernet adapter’s DC port
5. Connect DC-5V power adapter for auxiliary power supply.
6. Plug a USB flash drive or other USB external device into the HUB.
Note：
If the host and the Ethernet adapter cannot connect to the network normally, please
reconnect and test according to the above steps
What’s in the Package
1x Ethernet Adapter
1x 5 Feet DC Power Cable
Customers' satisfication is the final goal of our service. So, if there have any
problem of your purchase, please feel free send email to [email protected].
">