DIR-867
AC1750 MU-MIMO
Wi-Fi Router
Quick Install Guide
Package Contents
DIR-867 AC1750 MU-MIMO Wi-Fi Router
Power Adapter
Ethernet Cable
Wi-Fi Configuration Card
Quick Install Guide
If any of the above items are missing, please contact your reseller.
Minimum Requirements
Network Requirements:
• An Ethernet-based broadband modem
Web-based Configuration Requirements
• Computer, smartphone or tablet with a Web browser*
*
2
We recommend using the latest available browser version for the best
compatibility and performance.
Hardware Overview
1
5
2
3
4
6
7 8 9 10 11
1
Power LED
A solid light indicates a proper connection to the power supply. The light will
be a solid orange during boot up.
2
Internet LED
A solid light indicates connection on the Internet port. If the LED is orange, the
router cannot connect to the Internet.
3
Wireless
(2.4 GHz) LED
A solid light indicates that the 2.4 GHz wireless band is enabled.
4
Wireless
(5 GHz) LED
A solid light indicates that the 5 GHz wireless band is enabled.
5
Gigabit LAN
Ports (1-4)
Connect Ethernet devices such as computers, switches, storage (NAS) devices
and game consoles.
6
Gigabit Internet
Connect a broadband modem or gateway to this port using an Ethernet cable.
Port
7
Reset Button
Insert a paperclip in the hole, wait for 10 seconds, and release to reset the
router to default settings.
8
WPS Button
Press to start the WPS process and automatically create a secure connection
to a WPS client.
9
WiFi Button
Press this button to turn on or off the wireless networks.
10
Power
Connector
Connect the supplied power adapter.
11
Power Button
Press to power the router on or off.
3
Before you Start
• Users with DSL providers - If you are using a PPPoE connection, you will need
your PPPoE user name and password. If you do not have this information, contact
your Internet provider. Do not proceed until you have this information.
• Users with Cable providers - Make sure you unplug the power to your modem.
In some cases, you may need to turn it off for up to 5 minutes.
Connect your Router
4
1
Unplug the power to your DSL or Cable modem.
2
Connect an Ethernet cable from the Internet port of the router to the
Ethernet port on your DSL or Cable modem.
3
Plug in or turn on the power to your modem first. Wait about a minute
and then plug in the power and turn on the router. Wait until the router
is booted up (Power and wireless LEDs turn green).
4
If you are connecting wirelessly, you may now connect to the router using
the supplied Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and
Wi-Fi password.
Wi-Fi Configuration Note
5
5
If you are configuring the DIR-867 from a PC with a wired Ethernet connection,
plug one end of an Ethernet cable into the port labeled 1 on the back of the
router, and the other end into the Ethernet port on your computer.
6
Proceed with router configuration to set up your router.
Configuration
There are two ways to configure your router:
A. Web Browser - Use a web browser from your computer.
B. Wi-Fi Mobile app - Use a mobile device with the D-Link Wi-Fi Mobile app.
Refer to the Wi-Fi Mobile Setup section for more information.
A. Web Browser Configuration
1
6
Open a web browser (e.g. Internet Explorer, Chrome, Firefox, or Safari)
and enter http://dlinkrouter.local./ or the IP address of the router
(http://192.168.0.1).
2
When the Welcome screen appears, click Next to continue.
3
The router will automatically detect your Internet connection type. If it cannot,
then select your Internet connection and click Next to continue.
For DSL (PPPoE) users, enter your PPPoE user name and password supplied
by your ISP. Click Next to continue.
7
If you have a Static IP connection, enter the IP information and DNS settings
supplied by your ISP. Click Next to continue.
4
Create a name and password for your Wi-Fi Network. Your wireless devices
(i.e., tablets, smartphones, and laptops) will need to have this information
entered to be able to connect to your wireless network. Click Next to
continue.
5
Continue with the Setup Wizard to finish configuring your DIR-867 router.
Once completed, the Internet LED will turn green indicating that your router
is connected to the Internet.
Congratulations! You have completed the router installation.
8
B. Wi-Fi Mobile Setup
1
Scan the code below or search “D-Link Wi-Fi” (App Store or Google Play) to
download the Wi-Fi Mobile app to your iPhone, iPad, or Android device.
iOS
2
Android
D-Link Wi-Fi App
Once your app is installed, you may now configure your router. Connect to
the router wirelessly by going to your wireless utility on your device. Scan
for the wireless network name as listed on the supplied Wi-Fi Configuration
card/sticker. Select the network and then enter the Wi-Fi Password.
Wi-Fi Name(SSID) 2.4Ghz:
dlink-xxxx
Wi-Fi Name(SSID) 5GHz:
dlink-xxxx-5GHz
Password: xxxxxxxx
To configure your router, go to:
http://dlinkrouter.local.
Or http://192.168.0.1
Username: “Admin”
Password:” “ (leave the field blank)
3
Once connected, tap on the D-Link Wi-fi icon from your mobile device,
then tap Add Device to continue. Please follow the on-screen instructions
to complete the setup.
4
Once the Setup Complete screen appears, tap Save and write down the
new Wi-Fi Network name and password on your companion card for future
reference.
Note: To reconnect to your router, launch your wireless utility, select the new
Wi-Fi Network you created, and then enter your new Wi-Fi password.
9
Troubleshooting
How do I connect my wireless devices to the DIR-867 router?
1. Open your wireless network utility that displays available wireless networks.
2. Select the Wi-Fi Network name you assigned in the wizard and connect.
Note: If you did not run the setup wizard or you reset the router to its default
settings, refer to the Wi-Fi Configuration Card included for the default Wi-Fi
Network Name and Wi-Fi Password.
You can also connect wireless devices to the DIR-867 router using WPS:
1. Press the WPS button on the DIR-867 for three seconds.
2. Within one minute press the WPS button on your wireless device.
3. Allow up to two minutes to connect.
Note: Some devices may require you to log in to a utility to start the WPS process.
Refer to the user manual of the device you want to connect to the router if you do
not know how to start the WPS process.
How do I change the wireless settings on the DIR-867 router?
1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter http://dlinkrouter.local./ You can also enter the IP address of the
router (http://192.168.0.1).
2. At the login screen, enter the router password you created in the wizard.
3. Go to Settings > Wireless to create a new Wi-Fi network name (SSID)
and Wi-Fi password.
*Documentation available at:
United States: http://support.dlink.com/DIR-867
Canada: http://support.dlink.ca/DIR-867
10
GPL Code Statement
This D-Link product includes software code developed by third parties, including
software code subject to the GNU General Public License (“GPL”) or GNU Lesser
General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL,
and information on obtaining access to the GPL code and LGPL code used in this
product, are available to you at:
http://tsd.dlink.com.tw/GPL.asp
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WARRANTY and is subject to the copyrights of one or more authors. For details,
see the GPL code and the LGPL code for this product and the terms of the GPL and
LGPL.
Written Offer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such software,
D-Link will provide upon written request via email and/or traditional paper mail
the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to
cover shipping and media charges as allowed under the GPL and LGPL.
Please direct all inquiries to:
Email:
[email protected]
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html
11
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website.
United States
Canada
Internet: http://support.dlink.com
Internet: http://support.dlink.ca
Version 1.00 (US)_128x188
October 13 2017
610000008211
©2017 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and other countries. iPhone, iPad, and iPod touch are registered trademarks of Apple
Inc. Android is a trademark of Google, Inc. Other trademarks are the property of their respective owners. Maximum wireless signal rate
derived from IEEE Standard 802.11ac, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual
data throughput rate. Environmental factors will adversely affect wireless signal range. Product specifications, size and shape are subject
to change without notice, and actual product appearance may differ from that depicted on the packaging.
Visit www.dlink.com for more details.
12
">
