Satechi ST-AMBKM Aluminum Wireless Keyboard User Guide
PDF
Download
Document
Advertisement
Advertisement
INSTRUCTIONAL GUIDE WIRELESS KEYBOARD 1 Turn on your Wireless Keyboard. 2 To assign a Bluetooth device, press and hold one The power indicator light should turn green for ~3 seconds, then turn off. of the keyboard’s Bluetooth buttons for ~3 seconds until blue LED light is flashing. You can assign up to 3 Bluetooth devices. 3s 3 On the host device, look for “Satechi Bluetooth 4 To toggle between connected Bluetooth devices, Keyboard” and connect to pair. The blue LED light will stop blinking, indicating a successful pairing. press Bluetooth 1, 2, or 3 button. To remove saved Bluetooth device, press Fn + Shift (left) + Delete. 5 The power indicator light will flash green when 6 The keyboard will go into sleep mode after ~30 battery is low. Plug in charging cable into keyboard’s USB-C port and connect to a powered USB port. Allow 2-3 hours for a full charge or until red LED light turns off. minutes of inactivity. Press any key to wake up. Zzz 2-3h NOTE: USE INCLUDED USB-C CABLE TO FULLY CHARGE YOUR KEYBOARD BEFORE FIRST USE ">

Public link updated
The public link to your chat has been updated.
Advertisement