Usage diagram
Passive circuit design, no need for power supply, convenient to use, just connect all input and output audio devices to
the interface of MC104 PRO, just as the following picture shows:
1 audio source → 4 active speakers/
headphones/Amplifier → select among 4 outputs
4 audio sources → 1 active speaker/
headphone/Amplifier → select among 4 outputs
who want to connect all cables at one side. But the input
and output of 3.5mm AUX interface on the opposite side
is prior than the new 3.5mm AUX interface.
MC104 PRO 4-way
Analog Audio Switcher Box
Parameters
Introduction
Audio input: 4 groups of stereo 3.5mm AUX
MC104 PRO is a 4-IN-1-OUT / 1-IN-4-OUT audio selector
Audio output: 2 groups of stereo 3.5mm AUX
designed for customers who have several audio sources
Mute function: support
and outputs, 4-IN-1-OUT suitable for debugging equipment
Independent select switch: support
and do audio source contrast, 1-IN-4-OUT for headphone,
Dimensions (W*D*H): 84*55*25 mm / 33.1*21.7*9.8 in
power amplifier and active speakers contrast. Each
Net Weight: 73.5g / 0.16lb
channel with independent switch, no common ground
Contact Information
noise will generate even connecting multiple audio
sources.
Address: Room 1329, Wang Cheng Building, Long Guan street,
Long Hua new District, Shenzhen, Guang Dong, China
Warm tips
Contact: LIU CHENXI
We designed a new 3.5mm AUX interface on the right of
Tel: +86-18570015672
the other four 3.5mm AUX interfaces for some customers
Email: [email protected]
">
