B-block for BHH/BHHF actuators

B-block for BHH/BHHF actuators
Data sheet
Sheet No.: BB-01 RevA
Date: October 2010
B-block for BHH/BHHF actuators
For Remote mounting of CB blocks. Can be used where actuator area control equipment
must be placed away from the actuator. (Difficult access, submersion, actuators without
mounting face).
This block is also used for 1-line actuators when the spring cavity is hooked up for remote
breathing or for spring boosting.
Main dimensions:
(Inches in parenthesis)
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF