Globalmediapro SCT DH01 DVI and Audio to HDMI Converter User's manual

HDMI to DVI+Audio Converter, DVI+Audio to HDMI Converter
ITEM NO.: HD01, DH01
These handy devices provide an easy and instant approach for converting digital video (HDMI or DVI-D)
and both digital audio (SPDIF) and analog stereo audio to digital video (DVI or HDMI). With these
Converters, HDMI based devices such as DVD, PS3, or set top boxes can connect to your PC LCD
monitor and PC speakers at lowest cost. DVI based devices such as PC with SPDIF or analog stereo
audio can connect to your HDMI TV at lowest cost.
HD01 HDMI to DVI Converter
Feature:
z
z
z
z
z
HDMI 1.2a compatible
Fully HDCP compliant
HDMI video up to 165MHz
Coaxial SPDIF audio, stereo analog audio input
Built-in “EDID data” detector and storage.
Rotary Switch Setting:
0: Analog Audio Mode
1: S/PDIF Audio Mode
2-5: Reserved
6: EDID Default
Step 1: Power on
Step 2: Switch to 6 then green led will on
Step 3: Wait green led off then switch back to 0 or 1
7: EDID Update from DVI monitor
Step 1: Power on
Step 2: Connect DVI cable
Step 3: Switch to 7 then green led will on
Step 4: Wait green led off then switch back to 0 or 1
DH01 DVI & Audio to HDMI Converter
Feature:
z
z
z
z
z
HDMI 1.2a compatible
Fully HDCP compliant
DVI video up to 165MHz
Coaxial SPDIF audio, stereo analog audio input
Built-in “EDID data” detector and storage.
Rotary Switch Setting:
0: Analog Audio Mode
1: S/PDIF Audio Mode
2-5: Reserved
6: EDID Default
Step 1: Power on
Step 2: Switch to 6 then green led will on
Step 3: Wait green led off then switch back to 0 or 1
7: EDID Update from HDMI monitor
Step 1: Power on
Step 2: Connect HDMI cable
Step 3: Switch to 7 then green led will on
Step 4: Wait green led off then switch back to 0 or 1
Installation View:
HD01
DH01
REMARK:
EDID: Extended display identification data is a data structure provided by a computer display to
describe its capabilities to a graphics card. It is what enables a modern personal computer to know
what kind of monitor is connected
Trouble Shooting:
1.
If your monitor without audio function, then please setting the rotary switch at 6 (EDID Default), force
“audio output” to your external speaker.
2.
Only HDMI enabled TV sets with underscan/overscan* support, the full active video can be
accurately displayed. Some HDMI equipped TV sets may not support this feature. If
underscan/overscan* is NOT supported, the top, bottom, left and right border of the active video may
be screened, and the S/PDIF audio may not sound right.
2
3.
S/PDIF audio input can support up to 8-channel audio input.
If your TV not support Dolby Digital or
dts audio decoding , then you will add audio decoder or amplifier.
4.
S/PDIF supports only 48KHz audio sample rate. Other than this rate, the input digital audio should
be adjusted to 48KHz in order to get audio signal correctly sent.
Specification:
TEM NO.
Video Amplifier Bandwidth
Output Video Signal
Output DDC Signal
Single Link Rang
Input/Output Connector
Temperature
Power Consumption
Power Supply
DIMENSIONS
W x H x D mm
Weight
HD01
DH01
1.65 Gbps
1.2 Volts p-p
5 Volts p-p (TTL)
1080P/1920 X 1200
DVI-I 29 pin female (digital only)
HDMI Type A 19 PIN
RCA Connector: Coax SPDIF, Phone Jack: Analog stereo
Operation:-10℃~45℃, Storage: -30℃~70℃
10 watts (max)
DC5V 2AMP
122x95x25
122x95x25
300 g
300 g
3