Trendnet TFC-15MS100 100Base-FX Multi-Mode to Single Mode SC-Type Fiber Converter Quick Installation Guide

Fiber Converters
 Quick Installation Guide (1)
Fiber Converters /11.15.2012
1. Before You Start
Package Contents
 Fiber converter
 Multi-Language Quick Installation Guide
 Power adapter
Minimum Requirements
 TFC-1600 chassis (optional) or sturdy, level surface that can support the weight of the Fiber
Converter
 10/100 Mbps Ethernet switch
 Fiber cables compatible with the fiber converter's connector and media specifications
 Cat. 5, Cat. 5e, or Cat. 6 RJ-45 Ethernet cable
Optional Equipment
 Standard 19” rack
 TFC-1600 chassis (optional)
1
2. Hardware Installation
Installing Two Stand Alone Fiber Converters Together
1. Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber converters to an Ethernet
port on your switch (e.g TE100-S24g).
2. Connect the fiber cable to the fiber converters.
3. Connect the power adapter to the fiber converter.
Note:
 For the TFC-110MM/MST/MSC/110S15/S15i/S30/S30i/S60/S60i/S100, the TX and RX cables
must be reversed on the opposite fiber connection
 TFC-15MS100 converts Multi-Mode to Single-Mode fiber, it can be connected to a switch with
Multi-Mode SC-type fiber connection (e.g TEG-424WS with fiber modules) to extend the distance
up to 15km with Single-Mode fiber.
 Cabling
• Multi-Mode Fiber Optic Cable: TFC-110MSC, TFC-110MST, TFC-110MM
• Single-Mode Fiber Optic Cable: TFC-110S15, TFC-110S30, TFC-110S60, TFC-110S100,
TFC-110S15i, TFC-110S30i, TFC-110S60i
• Single Strand Fiber Optic Cable: TFC-110S20D3i, TFC-110S20D5i, TFC-110S40D3,
TFC-110S40D5, TFC-110S40D3i, TFC-110S40D5i
2
Installing Fiber Converter in a Chassis
1. Unscrew the bay cover from the desired bay on the chassis.
2. Unfasten the thumbscrew and remove the fiber converter from the metal casing.
3. Slide the fiber converter into an available slot and fasten the thumbscrew.
3
3. LEDs and DIP switches
LED
Color
Sequence
Function
TFC-110MM/MST/MSC/
110S15/S30/S60/S100/
TFC-110S20D3i/S20D5i/
S40D3/S40D5/S40D3i/S40D5i
PWR
(Power)
100M
Green
Solid
Device powered On
Off
Device powered Off
Green
Solid
100/200Mbps (Half/Full Duplex) Connection
N/A
N/A
Off
10/20Mbps (Half/Full Duplex) Connection
N/A
Green
Solid
Connection on TX end in full duplex mode
N/A
Blinking
Data collision is detected
N/A
N/A
Off
Connection on TX end in half duplex mode
N/A
Green
Solid
Connection on Fiber end in full duplex mode
N/A
Blinking
Data collision is detected
N/A
Off
Connection on Fiber end in half duplex mode
N/A
Green
Solid
100/200Mbps (Half/Full Duplex)
or 10/20Mbps (Half/Full Duplex) Connection
N/A
Green
Blinking
100/200Mbps (Half/Full Duplex)
or 10/20Mbps Data Transmitting/Receiving
N/A
N/A
Off
The link is disconnected
N/A
Green
Solid
100/200Mbps (Half/Full Duplex) Connection
N/A
Green
Blinking
100/200Mbps (Half/Full Duplex) Data Transmitting/Receiving
N/A
N/A
Off
The link is disconnected
N/A
Green
Solid
N/A
N/A
100/200Mbps (Half/Full Duplex)
Connection
Green
Blinking
N/A
N/A
100/200Mbps (Half/Full Duplex)
Data Transmitting/Receiving
N/A
Off
N/A
N/A
The link is disconnected
Red
Solid
N/A
The TX link is disconnected
N/A
N/A
Off
N/A
The TX link is connected
N/A
Red
Solid
N/A
The Fiber link is disconnected
N/A
N/A
Off
N/A
The Fiber link is connected
N/A
FDX / COL Green
(FX)
N/A
LINK/ACT
(FX)
LINK/ACT
FAIL (TX)
FAIL(FX)
TFC-15MS100
N/A
FDX / COL
Green
(TX)
LINK/ACT
(TX)
TFC-110S15i/30i/60i
4
Switch
Action
Function
TFC-110MM/MST/MSC/
110S15/S30/S60/S100
TFC-110S15i/30i/60i/20D3i/20D5i/40D3i/40D5i
On
Half-Duplex
Fiber Half-Duplex
Off
Full-Duplex
Fiber Full-Duplex
On
N/A
TX Forced Mode
Off
N/A
TX Auto-Negotiation
On
N/A
TX 10M
Off
N/A
TX 100M
On
N/A
TX Half-Duplex
Off
N/A
TX Full Duplex
On
N/A
LLR Enable
Off
N/A
LLR Disable
On
N/A
LLR Enable
Off
N/A
LLR Disable
1
2
3
4
5
6
Note:
 After changing the DIP Switch settings, power cycle the Fiber Converter.
 LLCF stands for Link Loss Carry Forward. When LLCF is enabled, the ports do not transmit a link
signal until they receive a link signal from the opposite port. Link loss is “carried forward” to the
managed switch or hub that is sending the link. LLCF can be used for either the copper or fiber
ports.
 LLR stands for Link Loss Return. When LLR is enabled, the fiber port’s transmitter shuts down if
its receiver fails to detect a valid receive link. If one of the optical conductors is bad, the card with
LLR enabled will return a no link condition to its link partner. LLR is used to detect link problems
only on the fiber port. If LLR is enabled on one Fiber converter, the opposite Fiber converter must
have LLR disabled.
5
4. Technical Specifications
Power Budget
Model Name
Media
Connectors
Wavelength
Transmit
(TX)
Optical Output Power Optical Input Power
(dBm)
(dBm)
Receive
(RX)
Min.
Max.
Min.
Max.
(Sensitivity)
Power Distance
Budget
(dBm)
TFC-110MSC
MMF
(Multi-mode
fiber)
RJ-45/SC (Duplex)
1300nm
-19
14
-32
-14
13
2km
TFC-110MST
MMF
RJ-45/ST (Duplex)
1300nm
-19
14
-32
-14
13
2km
TFC-110MM
MMF
RJ-45/MT- RJ
(Duplex)
1300nm
-23.5
14
-31
-33.5 (typ.) 7.5
2km
TFC-110S15
SMF
RJ-45/SC (Duplex)
(Single-mode
fiber)
1310nm
-20
0
-32
0
12
15km
TFC-110S30
SMF
RJ-45/SC (Duplex)
1310nm
-15
-8
-34
0
19
30km
TFC-110S60
SMF
RJ-45/SC (Duplex)
1310nm
-5
0
-35
0
30
60km
TFC-110S100
SMF
RJ-45/SC (Duplex)
1550nm
-5
0
-35
0
30
100km
TFC-110S15i
SMF
RJ-45/SC (Duplex)
1310nm
-20
0
-32
0
12
15km
TFC-110S30i
SMF
RJ-45/SC (Duplex)
1310nm
-15
-8
-34
0
19
30km
TFC-110S60i
SMF
RJ-45/SC (Duplex)
1310nm
-5
0
-35
0
30
60km
TFC-110S20D3i SMF
RJ-45/SC (Simplex)
1310nm
1550nm
-14
-8
-31
0
17
20km
TFC-110S20D5i SMF
RJ-45/SC (Simplex)
1550nm
1310nm
-14
-8
-31
0
17
20km
TFC-110S40D3
SMF
RJ-45/SC (Simplex)
1310nm
1550nm
-8
-3
-34
-3
26
40km
TFC-110S40D5
SMF
RJ-45/SC (Simplex)
1550nm
1310nm
-8
-3
-34
-3
26
40km
TFC-110S40D3i SMF
RJ-45/SC (Simplex)
1310nm
1550nm
-8
-3
-34
-3
26
40km
TFC-110S40D5i SMF
RJ-45/SC (Simplex)
1550nm
1310nm
-8
-3
-34
-3
26
40km
TFC-15MS100
MMF (1)
SC (Duplex)
1300nm
-23.5
-14
-31
0
7.5
2km
SMF (2)
SC (Duplex)
1310nm
-20
0
-32
0
12
15km
6
TFC-110MSC,TFC-110MST,TFC-110MM,TFC-15MS100,TFC-110S15,
TFC-110S30,TFC-110S60,TFC-110S100,TFC-110S15i,TFC-110S30i,
TFC-110S60i,TFC-110S20D3i,TFC-110S20D5i,TFC-110S40D3i,
TFC-110S40D5i,TFC-15MS100
GPL/LGPL General Information
This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public
License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject
to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and
LGPL are included in the product CD-ROM.
Please also go to (http://www.gnu.org/licenses/gpl.txt) or (http://www.gnu.org/licenses/lgpl.txt) for specific terms of each license.
The source codes are available for download from TRENDnet's web site (http://trendnet.com/downloads/list_gpl.asp) for at least three
years from the product shipping date.
You could also request the source codes by contacting TRENDnet.
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511
Informations générales GPL/LGPL
Ce produit TRENDnet comprend un logiciel libre écrit par des programmeurs tiers. Ces codes sont sujet à la GNU General Public
License ("GPL" Licence publique générale GNU) ou à la GNU Lesser General Public License ("LGPL" Licence publique générale limitée
GNU). Ces codes sont distribués SANS GARANTIE et sont sujets aux droits d'auteurs des programmeurs. TRENDnet ne fournit pas
d'assistance technique pour ces codes. Les détails concernant les GPL et LGPL GNU sont repris sur le CD-ROM du produit.
Veuillez également vous rendre en (http://www.gnu.org/licenses/gpl.txt) ou en (http://www.gnu.org/licenses/lgpl.txt) pour les conditions
spécifiques de chaque licence.
Les codes source sont disponibles au téléchargement sur le site Internet de TRENDnet web site
(http://trendnet.com/downloads/list_gpl.asp) durant au moins 3 ans à partir de la date d'expédition du produit.
Vous pouvez également demander les codes source en contactant TRENDnet.
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511
Allgemeine Informationen zu GPL/LGPL
Dieses Produkt enthält die freie Software "netfilter/iptables" (© 2000-2004 netfilter project http://www.netfilter.org) und die freie Software
„Linux „mtd“ (Memory Technology Devices) Implementation (© 2000 David Woodhouse), erstmals integriert in Linux Version 2.4.0-test 3
v. 10.07.2000 (http://www.kernel.org/pub/linux/kernel/v2.4/old-test-kernels/linux-2.4.0-test3.tar.bz2), sowie weitere freie Software. Sie
haben durch den Erwerb dieses Produktes keinerlei Gewährleistungsansprüche gegen die Berechtigten an der oben genannten
Software erworben; weil diese die Software kostenfrei lizenzieren gewähren sie keine Haftung gemäß unten abgedruckten
Lizenzbedingungen. Die Software darf von jedermann im Quell-und Objektcode unter Beachtung der Lizenzbedingungen der GNU
General Public License Version 2, und GNU Lesser General Public License (LGPL) vervielfältigt, verbreitet und verarbeitet werden.
Die Lizenz ist unten im englischsprachigen Originalwortlaut wiedergegeben. Eine nichtoffizielle Übersetzung in die deutsche Sprache
finden Sie im Internet unter (http://www.gnu.de/documents/gpl-2.0.de.html). Eine allgemeine öffentliche GNU Lizenz befindet sich auch
auf der mitgelieferten CD-ROM.
Sie können Quell-und Objektcode der Software für mindestens drei Jahre auf unserer Homepage www.trendnet.com im
Downloadbereich (http://trendnet.com/langen/downloads/list_gpl.asp) downloadend. Sofern Sie nicht über die Möglichkeit des
Downloads verfügen können Sie bei TRENDnet.
20675 Manhattan Place, Torrance, CA 90501 -U.S.A -, Tel.: +1-310-961-5500, Fax: +1-310-961-5511 die Software anfordern.
Información general sobre la GPL/LGPL
Este producto de TRENDnet incluye un programa gratuito desarrollado por terceros. Estos códigos están sujetos a la Licencia
pública general de GNU (“GPL”) o la Licencia pública general limitada de GNU (“LGPL”). Estos códigos son distribuidos SIN
GARANTÍA y están sujetos a las leyes de propiedad intelectual de sus desarrolladores. TRENDnet no ofrece servicio técnico
para estos códigos. Los detalles sobre las licencias GPL y LGPL de GNU se incluyen en el CD-ROM del producto.
Consulte también el (http://www.gnu.org/licenses/gpl.txt) ó el (http://www.gnu.org/licenses/lgpl.txt) para ver las cláusulas
específicas de cada licencia.
Los códigos fuentes están disponibles para ser descargados del sitio Web de TRENDnet
(http://trendnet.com/downloads/list_gpl.asp) durante por lo menos tres años a partir de la fecha de envío del producto.
También puede solicitar el código fuente llamando a TRENDnet.
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511
Общая информация о лицензиях GPL/LGPL
В состав данного продукта TRENDnet входит бесплатное программное обеспечение, написанное сторонними разработчиками.
Это ПО распространяется на условиях лицензий GNU General Public License ("GPL") или GNU Lesser General Public License
("LGPL"). Программы распространяются БЕЗ ГАРАНТИИ и охраняются авторскими правами разработчиков. TRENDnet не
оказывает техническую поддержку этого программного обеспечения. Подробное описание лицензий GNU GPL и LGPL можно
найти на компакт-диске, прилагаемом к продукту.
В пунктах (http://www.gnu.org/licenses/gpl.txt) и (http://www.gnu.org/licenses/lgpl.txt) изложены конкретные условия каждой из
лицензий.
Исходный код программ доступен для загрузки с веб-сайта TRENDnet (http://trendnet.com/downloads/list_gpl.asp) в течение, как
минимум, трех лет со дня поставки продукта.
Кроме того, исходный код можно запросить по адресу TRENDnet.
20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500 Fax: +1-310-961-5511
GPL/LGPL informações Gerais
Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU General Public
License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos
direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os detalhes do GNU GPL e do LGPL
estão no CD-ROM do produto. Favor acessar http://www.gnu.org/licenses/gpl.txt ou http://www.gnu.org/licenses/lgpl.txt para os termos
específicos de cada licença.
Os códigos fonte estão disponíveis para download no site da TRENDnet (http://trendnet.com/langen/downloads/list_gpl.asp) por pelo
menos três anos da data de embarque do produto.
Você também pode solicitar os códigos fonte contactando TRENDnet, 20675 Manhattan Place, Torrance, CA 90501, USA.Tel: +1-310961-5500, Fax: +1-310-961-5511.
GPL/LGPL üldinformatsioon
See TRENDneti toode sisaldab vaba tarkvara, mis on kirjutatud kolmanda osapoole poolt. Koodid on allutatud GNU (General Public
License) Üldise Avaliku Litsentsi (GPL) või GNU (Lesser General Public License) ("LGPL") Vähem Üldine Avalik Litsentsiga. Koode
vahendatakse ILMA GARANTIITA ja need on allutatud arendajate poolt. TRENDnet ei anna koodidele tehnilist tuge. Detailsemat infot
GNU GPL ja LGPL kohta leiate toote CD-ROMil. Infot mõlema litsentsi spetsiifiliste terminite kohta leiate
(http://www.gnu.org/licenses/gpl.txt) või (http://www.gnu.org/licenses/lgpl.txt).
Infot mõlema litsentsi spetsiifiliste terminite kohta leiate (http://www.gnu.org/licenses/gpl.txt) või (http://www.gnu.org/licenses/lgpl.txt).
Lähtekoodi on võimalik alla laadida TRENDneti kodulehelt (http://trendnet.com/langen/downloads/list_gpl.asp) kolme aasta jooksul
alates toote kättesaamise kuupäevast.
Samuti võite lähtekoodi paluda TRENDneti'lt, 20675 Manhattan Place, Torrance, CA 90501, USA. Tel: +1-310-961-5500, Fax: +1-310961-5511.
Fiber Converters
Fiber Converters /11.15.2012
Fiber Converters
Fiber Converters /11.15.2012