QuickBOLT 17713SS Flashed L Foot Instructions

AHJ CONDENSED PERMIT PACKAGE
2023
Version 3
17713SS
FLASHED L-FOOT
FOR ASPHALT SHINGLE ROOFS
A DIVISION OF QUICKSCREWS INTERNATIONAL CORP
I N S TA L L I N S T R U C T I O N S
1
2
RECOMMENDED MATERIALS
• Rafter locator
• Chalk or a crayon
• Drill with a 1/4” drill bit
• MFG approved sealant
• 1/2” Nut Setter
• Bar
INSTALLATION INSTRUCTIONS
3
1. Locate the and mark the rafter
2. Predrill the hole
3. Fill the predrilled hole with MFG approved sealant
4. Drive the Screw until the L-Foot is secure
5. Lift the shingles and place selaant around the L-Foot
6. Insert the Flashing underneath the shingles
4
5
6
7
">