G3R-I/O Datasheet

G3R-I/O Datasheet
Solid State Relays
G3R-I/O
Compact SSRs for I/O Interface with High
Dielectric Strength Requirements
• High-speed models with optimum input ratings for a variety of
sensors are available.
• Input Modules and Output Modules that can be used for the
G2R are available.
• Use a coupler conforming to VDE 0884 and assuring an I/O
dielectric strength of 4,000 V.
• Incorporate an easy-to-see monitoring indicator.
• -UTU models certified by UL, CSA, and TÜV.
Model Number Structure
■ Model Number Legend
[email protected]@@@@@@[email protected]@
2 3 4 5 6 7 8
9 10
1. Basic Model Name
G3R:
Solid State Relay
2. I/O Classification
I:
Input module
O:
Output module
3. Load Power Supply Type
A:
Switches AC loads
D:
Switches DC loads
4. Rated Load Power Supply Voltage
Z:
24 VDC
X:
48 VDC
2:
240 VAC
5. Rated Load Current
R1:
0.1 A
01:
1A
02:
2A
6. Terminal Type
S:
Plug-in terminals
7. Zero Cross Function
Z:
Equipped with zero cross function
L:
Not equipped with zero cross function
Blank:
DC-output model
8. Operation Indicator
N:
Equipped with operation indicator
9. Response Speed (only for DC Input Models)
I:
Low-speed (10 Hz)
Blank:
High-speed (1 kHz)
10.Certification
UTU:
Certified by UL, CSA, and TÜV
Solid State Relays
G3R-I/O
SSR
1
J-67
Ordering Information
■ List of Models
Input Module
Isolation
Indicator
Response speed
Logic level
Supply voltage
Photocoupler
Yes
---
4 to 32 VDC
Supply current
0.1 to 100 mA
Rated input
voltage
Model
100 to 240 VAC
G3R-IAZR1SN-UTU
High-speed
(1 kHz)
5 VDC
G3R-IDZR1SN-UTU
Low-speed
(10 Hz)
5 VDC
12 to 24 VDC
G3R-IDZR1SN-1-UTU
12 to 24 VDC
Output Module
Isolation
Phototriac
Indicator
Zero cross
function
Yes
Yes
Rated output load
2 A at 100 to 240 VAC
No
Photocoupler
---
Note: When ordering, specify the rated input voltage.
■ Accessories (Order Separately)
Track/Surface Mounting Socket
(Recommended)
Model
P2RF-05-E
Number of poles
1 pole (G2R: 1 pole usage)
Note: Refer to page 72 for details on other Sockets.
Connecting Socket Attaching Plate
Model
P2R-P
J-68
Applicable Socket
P2R-05A
Solid State Relays G3R-I/O
Rated input voltage
5 to 24 VDC
Model
G3R-OA202SZN-UTU
G3R-OA202SLN-UTU
2 A at 5 to 48 VDC
G3R-ODX02SN-UTU
1.5 A at 48 to 200 VDC
G3R-OD201SN-UTU
■ I/O Indication
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Mark indication
Specification
AC IN
Input module, AC input
DC IN
Input module, DC input
AC OUT
Output module, AC output
DC OUT
Output module, DC output
Mark attached to the top of the product
Specifications
■ Ratings (at an Ambient Temperature of 25°C)
Input Module
Input
Model
Rated voltage
Operating voltage
Input current
Must operate voltage Must release voltage
G3R-IAZR1SN-UTU
100 to 240 VAC
60 to 264 VAC
15 mA max.
60 VAC max.
G3R-IDZR1SN-UTU
5 VDC
4 to 6 VDC
8 mA max.
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
G3R-IDZR1SN-1-UTU 5 VDC
12 to 24 VDC
20 VAC min.
4 to 6 VDC
4 VDC max.
1 VDC min.
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
Output
Model
Logic level supply voltage
G3R-IAZR1SN-UTU
Logic level supply current
4 to 32 VDC
0.1 to 100 mA
G3R-IDZR1SN-UTU
G3R-IDZR1SN-1-UTU
SSR
Output Module
Input
Model
Rated voltage
G3R-OA202SZN-UTU 5 to 24 VDC
Operating voltage
4 to 32 VDC
Input current
G3R-OA202SLN-UTU
15 mA max.
(at 25°C)
G3R-ODX02SN-UTU
8 mA max.
Must operate voltage Must release voltage
4 VDC max.
1 VDC min.
G3R-OD201SN-UTU
Output
Model
G3R-OA202SZN-UTU
Rated load voltage
Load voltage range
Load current (See note.)
Inrush current
100 to 240 VAC
75 to 264 VAC
0.05 to 2 A
30 A (60 Hz, 1 cycle)
G3R-ODX02SN-UTU
5 to 48 VDC
4 to 60 VDC
0.01 to 2 A
8 A (10 ms)
G3R-OD201SN-UTU
48 to 200 VDC
40 to 200 VDC
0.01 to 1.5 A
8 A (10 ms)
G3R-OA202SLN-UTU
Note: The minimum current value is measured at 10°C min.
Solid State Relays
G3R-I/O
J-69
■ Characteristics
Input Module
Item
G3R-IAZR1SN-UTU
G3R-IDZR1SN-UTU
0.1 ms max.
G3R-IDZR1SN-1-UTU
Operate time
20 ms max.
15 ms max.
Release time
20 ms max.
0.1 ms max.
15 ms max.
Response frequency
10 Hz
1 kHz
10 Hz
Output ON voltage drop
1.6 V max.
Leakage current
5 µA max.
Insulation resistance
100 MΩ min. between input and output
Dielectric strength
4,000 VAC, 50/60 Hz for 1 min between input and output
Vibration resistance
10 to 55 to 10 Hz, 0.75-mm single amplitude
Shock resistance
1,000 m/s2
Ambient temperature
Operating: –30°C to 80°C (with no icing)
Storage: –30°C to 100°C (with no icing)
Certified standards
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Operating: 45% to 85%
Weight
Approx. 18 g
Output Module
Item
G3R-OA202SZN-UTU
G3R-OA202SLN-UTU
G3R-ODX02SN-UTU
Operate time
1/2 of load power source 1 ms max.
cycle + 1 ms max.
1 ms max.
Release time
1/2 of load power source cycle + 1 ms max.
2 ms max.
Response frequency
20 Hz
100 Hz
Output ON voltage drop
1.6 V max.
Leakage current
1.5 mA max.
2.5 V max.
1 mA max.
Insulation resistance
100 MΩ min. between input and output
Dielectric strength
4,000 VAC, 50/60 Hz for 1 min between input and output
Vibration resistance
Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude
Shock resistance
Destruction: 1,000 m/s2
Ambient temperature
Operating: –30°C to 80°C (with no icing)
Storage: –30°C to 100°C (with no icing)
Certified standards
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Operating: 45% to 85%
Weight
Approx. 18 g
J-70
Solid State Relays G3R-I/O
G3R-OD201SN-UTU
Engineering Data
Load Current vs. Ambient Temperature
4-point mounting (see note 1)
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
0.7
0.5
G3R-OD201SN-UTU (40 to 200 VAC)
4-point mounting (see note 1)
2
Load current (A)
2
Load current (A)
G3R-ODX02SN-UTU (4 to 60 VDC)
2
Load current (A)
G3R-OA202SZN-UTU/OA202SLN-UTU
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
0
20 30 40 55 60
80
−30 −20
100
1.1
1
Single-point
mounting
16-point mounting
(see note 2)
0.6
0.5
0.5
−30 −20
4-point mounting (see note 1)
1.5
Ambient temperature (°C)
0
20
40 55 60
80
−30 −20
100
Ambient temperature (°C)
0
20
40 55 60
80
100
Ambient temperature (°C)
Note: 1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
One Cycle Surge Current: Non-repetitive
Note: Keep the inrush current to half the rated value if it occurs repetitively.
G3R-ODX02SN-UTU
20
10
10
30 50
100 200
500 1000
Energized time (ms)
5000
10
9
9
8
8
7
6
5
4
3
7
6
5
4
3
2
2
1
1
0
10
30 50
100
300 500
Energized time (ms)
1000 2000
0
10
30 50
100
300 500
1000 2000
Energized time (ms)
SSR
Inrush current (A)
Inrush current (A)
30
G3R-OD201SN-UTU
10
Inrush current (A)
G3R-OA202SZN-UTU/OA202SLN-UTU
Solid State Relays
G3R-I/O
J-71
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G3R
1
Terminal Arrangement/
Internal Connections
(Bottom View)
5.2
3
(+)
4
9.6
0.5
29 max.
1
28 max.
13 max.
(−)
17.4
4.75
5
4.7
0.5 4.75
4
4
Load
5
7.5
3
Input
10
1
5
(−)
(+)
2
20
Connecting Sockets
Connecting Socket Attaching Plates
P2RF-05
Five, M3.5×8
G3R I/O Relay
4 dia.
4.2-dia. hole
12
71.5 max.
P2RF-05 Socket
58.5 *
M3 (M3 x16) or
3.2-dia. hole
19.5 max.
30 max.
54 max.
* Indicates a value when using the [email protected]
Supporting Rail.
The value is 67.5 when using the [email protected]
P2RF-05-E
G3R I/O Relay
59 max.
48 max.
M3.5 screw
3.2-dia. hole
3.5-dia.
hole
PFRF-05-E
Socket
62.5 **
(66.5)***
85.5 max.
M3 or 3.5-dia. hole
61 max.
P2R-05A
** Indicates a value when using the [email protected]
Supporting Rail with the P2RF-05-E
The value is 71.5 when using the [email protected]
*** Indicates a value when using the [email protected]
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the [email protected]
14.5 max.
G3R I/O Relay
35.5 max.
P2R-05A Socket
Five, 3x1.5-dia. hole
36 max.
J-72
Solid State Relays G3R-I/O
(Panel thickness must
be 1.6 to 2.0 mm.)
14.5 max.
P2R-05P
Five, 1.6-dia. hole
G3R I/O Relay
35.5 max.
P2R-05P Socket
36 max.
Dimensional tolerance is ±0.1.
14 max.
Five, 1.6-dia. hole
P2R-057P
G3R I/O Relay
32 max.
P2R-057P Socket
41 max.
Socket Mounting Plate
Use the Socket Mounting Plate when arranging several Sockets in a row.
R2.25
10 ellipses
SSR
Square hole
Solid State Relays
G3R-I/O
J-73
G70A I/O Block Base
■ Ordering Information
Classification
Output
Internal I/O circuit common
NPN (+ common)
Input
Rated voltage
Model
24 VDC
G70A-ZOC16-3
PNP (– common)
24 VDC
G70A-ZOC16-4
NPN/PNP
110 VDC max., 240 VAC max.
(See note.)
G70A-ZIM16-5
Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
■ Dimensions
Note: All units are in millimeters unless otherwise indicated.
G70A-ZOC16 (Output)
234
64
+0.2
35.3−0
75
28.6
13.5
M3.5
9.2 18.4
20.7
34.2
48.7
G70A-ZIM16 (Input)
234
48.7
10.2
+0.2
35.3−0
75
13.5
M3.5
9.2 19.6
20.7
64
J-74
Solid State Relays G3R-I/O
34.2
■ Terminal Arrangement/Internal Connection
G70A-ZOC16-3 (NPN)
−
+
−
+
(+) (−)
Connector Terminal
Arrangement
(Top View)
G70A-ZOC16-4 (PNP)
−
+
SSR
−
+
(+) (−)
Connector Terminal
Arrangement
(Top View)
Solid State Relays
G3R-I/O
J-75
G70A-ZIM16-5 (NPN/PNP)
−
+
1A1
−
+
COM.
2A1
1A2
3A1
2A2
4A1
3A2
5A1
4A2
6A1
5A2
7A1
6A2
8A1
7A2
9A1
8A2
10A1
9A2
11A1
10A2
12A1
11A2
13A1
12A2
14A1
13A2
15A1
14A2
16A1
15A2
16A2
Connector Terminal
Arrangement
(Top View)
Safety Precautions
■ Precautions for Correct Use
Protective Element
Please observe the following precautions to prevent failure to
operate, malfunction, or undesirable effect on product performance.
Since the SSR does not incorporate an overvoltage absorption
component, be sure to connect an overvoltage absorption
component when using the SSR under an inductive load.
Connection
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
Precaution of Mounting Output Modules
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
G3R
G3R
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
G3R
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K091-E1-04
J-76
In the interest of product improvement, specifications are subject to change without notice.
Solid State Relays G3R-I/O
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement