SOLID STATE CONTACTOR MODULE MODEL 1355 FEATURES

SOLID STATE CONTACTOR MODULE MODEL 1355 FEATURES
SOLID STATE CONTACTOR MODULE
MODEL 1355
FEATURES
• Microprocessor based design substantially reduces
installation labor and physical space requirements.
• Five drivers, M1– M5, for motor loads, rated for 100A
peak current.
• M1– M5 motor drivers offer soft start and current limiting capability.
• Optional three, 10A full bridge actuator drivers, controlled
via CANopen control commands.
• One 3A driver output, for a main (line) contactor.
• Optional six digital inputs allow stand-alone control of five
motor loads.
• H-bridge mode allows bidirectional operation of a single
motor load.
• Ability to connect outputs in parallel to drive a single larger
motor load.
• Ability to connect multiple 1355s throughout a vehicle
control system.
• Accurate motor, actuator current measurements and full
diagnostics reported via CANbus.
DESCRIPTION
The Curtis Model 1355 is a compact and affordable solid-state
alternative to electro-mechanical contactor panels. It offers fully
programmable soft-start and current-limiting control of up to 5
brushed DC permanent magnet or series wound motors, via
• CANopen interface allows interconnection to a wide range
of products, including the Curtis line of AC motor speed
controllers and Curtis vehicle system controllers.
• Heavy duty threaded M6 bus bars for battery and M5 for
motor connectors eliminate reliability issues often found
with push-on power connectors.
CANbus commands or direct digital inputs.
• All logic connections via reliable, IP65 sealed 14-pin
AmpSeal connector.
APPLICATION
• Robust IP65 sealed enclosure provides excellent chemical
resistance and protection from harsh environments.
Typical applications include Sweeper-Scrubber floor care
machines, or any other 24–36VDC application requiring
control of multiple loads up to 100A each.
• Designed to withstand high levels of bump, shock and vibration.
• Programmable 24 or 36VDC nominal supply.
• Externally viewable power/status LEDs.
• Serial communication port for Curtis 1314/1313
programming tools.
www.curtisinstruments.com
MODEL 1355
SPECIFICATIONS
Meets or complies with relevant US and International Regulations:
EMC: Designed to the requirements of EN12895.
Safety: Designed to the requirements of:
EN1175-1:1998+A1:2010
EN (ISO) 13849-1
IP65 Rated per IEC 60529.
UL583 recognition pending.
Regulatory compliance of the complete vehicle system with the controller installed is the responsibility of the vehicle OEM.
MODEL CHART
Model
Number
Voltage
(V)
1355-4001
1355-4101
Motor Outputs M1 – M5
Actuator
Outputs
Digital
Inputs
5 x 40
3X 10A Peak
5A Cont.
N/A
5 x 40
N/A
6
Peak Current,
10 Sec. (A)
S2-60 Min
(A)
24–36
5 x 100
24–36
5 x 100
FUNCTIONAL SAFETY DATA
Model
Model 1355-X00Y
(With Actuator Output)
Model 1355-X10Y
(Without Actuator Output)
Safety Function
PL
Designated
Architecture
MTTFd
Uncommanded Powered
Movement
b
2
>20
>75
Motor Braking Torque
b
2
17
>73
Uncommanded Powered
Movement
c
2
>27
>69
Motor Braking Torque
b
2
>21
>68
(Years)
DC%
SYSTEM ACCESSORIES
The Curtis Model 1232E provides
advanced control of AC induction motors
performing on-vehicle traction drive or
hydraulic pump duties and offers the
highest levels of functional safety.
The Curtis Model 1229 is a sealed,
heavy-duty permanent magnet
motor speed controller intended for
demanding traction applications in
hostile environments.
The Curtis Model 1313 Handheld
Programmer is ideal for setting
parameters and performing diagnostic functions.
Contact Curtis to obtain the VCL Vehicle Control Language compiler and development tools.
MODEL 1355
DIMENSIONS mm
65. 5
2-M6 X 1.0
5-M5 X 0.8
10 MIN
10 MIN
4-Ø6.0
B+
M3
M4
M2
M5
165.0
153.0
BM1
108.0
120.0
8.0
71.8
CONNECTOR WIRING DIAGRAMS
1355-4101
1355-4001
DIGITAL
INPUT 5
DIGITAL
INPUT 4
DIGITAL INPUT 6
(INTERLOCK)
B−
KSI
14
DIGITAL
INPUT 3
13
12
3
4
SERIAL
TX
10
CAN L
14
SERIAL
RX
13
12
2
1
5
3
4
SERIAL
TX
DIGITAL
INPUT 2
CAN H
DIGITAL
INPUT 1
+15V
11
7
8
9
6
MAIN
CONTACTOR
DRIVER
CAN H
+15V
11
ACTUATOR
3B
B−
KSI
7
8
ACTUATOR
3A
ACTUATOR
1A
SERIAL
RX
9
5
ACTUATOR
1B
10
6
2
1
ACTUATOR
2A
MAIN
CONTACTOR
DRIVER
CAN L
ACTUATOR
2B
MODEL 1355
TYPICAL WIRING DIAGRAM
1355-4001
KEY SWITCH
20A
MAIN COIL
J2-2
MAIN DRIVER
B+
J2-9
J2-14
BI-DIRECTIONAL
ACTUATOR
10A PEAK CURRENT
J2-13
J2-1
M
MAIN
CONTACTOR
M6−
MOTOR LOAD 2
100A PEAK
M7+
M2
M
POWER
FUSE
M7−
MOTOR LOAD 3
100A PEAK
M8+
M3
M
M
J2-10
J2-4
CAN PORT
SERIAL PORT
4 PIN MOLEX
M1
M
J2-11
MOTOR / VALVE
10A PEAK CURRENT
M6+
MOTOR LOAD 1
100A PEAK
M
J2-6
BI-DIRECTIONAL
ACTUATOR
10A PEAK CURRENT
KSI
J2-3
4
J2-5
3
J2-8
1
J2-7
2
J2-12
M8−
BATTERY
24V / 36V
MOTOR LOAD 4
100A PEAK
CAN H
M4
CAN L
+15V
Tx
Rx
GND
M
MOTOR LOAD 5
100A PEAK
Serial
Port
M5
B−
M
MODEL 1355
TYPICAL WIRING DIAGRAM
1355-4101
KEY SWITCH
20A
MAIN COIL
J2-2
MAIN DRIVER
B+
J2-9
MOTOR LOAD 1
100A PEAK
KSI
M1
J2-1
SWITCH 1
J2-6
SWITCH 2
J2-10
SWITCH 3
J2-11
SWITCH 4
J2-13
SWITCH 5
J2-14
SWITCH 6
J2-4
CAN PORT
SERIAL PORT
4 PIN MOLEX
WARRANTY
J2-3
4
J2-5
3
J2-8
1
J2-7
2
J2-12
M
MAIN
CONTACTOR
DIGITAL INPUT 1
MOTOR LOAD 2
100A PEAK
DIGITAL INPUT 2
DIGITAL INPUT 3
M2
DIGITAL INPUT 4
DIGITAL INPUT 5
M
POWER
FUSE
MOTOR LOAD 3
100A PEAK
M3
M
DIGITAL INPUT 6
(INTERLOCK)
BATTERY
24V / 36V
MOTOR LOAD 4
100A PEAK
CAN H
M4
M
CAN L
+15V
Tx
Rx
MOTOR LOAD 5
100A PEAK
Serial
Port
GND
M5
M
B−
Two year limited warranty from time of delivery.
is a trademark of Curtis Instruments, Inc.
Specifications subject to change without notice
©2015 Curtis Instruments, Inc.
50273 REV A 7/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement