Pioneer DDJ-WeGO3-W DJ Controller Owner's Manual

DJ Controller
DDJ-WEGO3
http://pioneerdj.com/support/
The Pioneer DJ support site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.
Operating Instructions (DJ Software Setup)
Contents
How to read this manual
!
!
!
!
!
!
Thank you for buying this Pioneer product.
Be sure to read both this booklet and “Operating Instructions (DJ
unit Setup).” Both documents include important information that
you should understand before using this product.
This document describes how to use each DJ software. The hardware operating procedures are described in “Operating Instructions
(DJ unit Setup).”
In this document, the product main unit button name and terminal
name is listed in [ ]. (Example: [CUE] button, [AUX IN] terminal)
Please note that the screens and specifications of the software
described in this manual as well as the external appearance and
specifications of the hardware are currently under development and
may differ from the final specifications.
Please note that depending on the operating system version, web
browser settings, etc., operation may differ from the procedures
described in this manual.
The latest version of Operating Instructions (this document) can be
downloaded from the Pioneer DJ support site below.
http://pioneerdj.com/support/
djay 2 for iPad/iPhone, vjay for iPad/iPhone
Before using djay 2 for iPad/iPhone and vjay for iPad/iPhone ............... 3
Operation...................................................................................................... 3
djay for Mac
Before installing djay for Mac .................................................................... 5
Installing djay for Mac................................................................................. 5
Operation...................................................................................................... 5
Serato DJ Intro
Before installing Serato DJ Intro ............................................................... 8
Installing Serato DJ Intro............................................................................ 9
About the driver software and setting utility software............................ 11
Operation.................................................................................................... 12
Upgrading.................................................................................................. 14
VirtualDJ LE 8
Before installing VirtualDJ LE 8 ............................................................... 15
Installing VirtualDJ LE 8............................................................................ 16
About the driver software and setting utility software............................ 17
Operation.................................................................................................... 18
Upgrading.................................................................................................. 19
Additional information
Using as a controller for other DJ software............................................. 20
About trademarks and registered trademarks....................................... 20
Cautions on copyrights............................................................................. 20
2
En
Before using djay 2 for iPad/iPhone
and vjay for iPad/iPhone
Starting the system
djay 2 for iPad/iPhone and vjay for iPad/iPhone can be purchased from
App Store. Also check the latest system requirements.
! If you already have djay 2 for iPad/iPhone or vjay for iPad/iPhone,
update it to the latest version.
! The included iPhone/iPad connection cable (Lightning) is required to
connect this unit with your iPhone or iPad and perform operation.
iPhone/iPad connection cable (30-pin dock connector) is sold
separately.
For details, see Operating Instructions (DJ unit Setup).
The Pioneer DJ logo appears. The following is an example of displaying
the logo for djay 2 for iPad.
Start djay 2 for iPad/iPhone or vjay for iPad/iPhone.
Caution
djay 2 for iPad/iPhone and vjay for iPad/iPhone are products of
algoriddim.
Pioneer basically does not accept inquiries on how to operate djay 2
for iPad/iPhone and vjay for iPad/iPhone.
For the functions of djay 2 for iPad/iPhone and vjay for iPad/iPhone
and the operating procedures, see [Software Info] of [DDJ-WeGO3]
on the Pioneer DJ support site below.
http://pioneerdj.com/support/
djay 2 for
iPhone
vjay for
iPhone
iOS
iOS 8, 7.1
iOS 8, 7.1
Compatible
models
iPad Air 2, iPad mini 3, iPad
Air, iPad mini 2, iPad (4th
generation), iPad mini, iPad
(3rd generation)*, iPad 2*
iPhone 6 Plus, iPhone 6,
iPhone 5s, iPhone 5c, iPhone
5, iPhone 4s*, iPod touch (5th
generation)
*
!
!
A
LOAD
1
BROWSE BACK
2
HI
TEMPO
TEMPO
STANDBY ON
MIC VOL
MASTER VOL
LOAD
A
BROWSE BACK
2X
FX1
B
LOAD
HI
HI
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX2
FX
3
SYNC
MID
VOL
MID
LOW
SELECT
LOW
2X
FX1
SEL
ECT
FX2
FX
3
SYNC
MASTER
A
SHIFT
B
SHIFT
O
T
H
AM
PL
ER
CU
E
!
For information on the latest system requirements, compatibility, and supported
operating systems, see “Software Info” of “DDJ-WeGO3” on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
Operation is not guaranteed on all iPhones and iPads, even those meeting the
system requirements described above.
Depending on the power-saving settings and other conditions of the iPhone or
iPad, performance may be insufficient.
Problems may occur with operation depending on the other software that you
use.
The following describes the procedure for loading tracks onto the left
deck as an example.
CH
AR
SE
!
To use a model incorporating a dock connector, you must have the separately
sold iPhone/iPad connection cable (30-pin dock connector) (DJC-WeCAi30).
For information related to the separately sold iPhone/iPad connection cable
(30-pin dock connector) and the latest supported models, see the Pioneer DJ
support site below.
http://pioneerdj.com/support/
Loading tracks and playing them
CU
E
vjay for
iPad
If the screen above does not appear even after waiting a while, disconnect the iPhone/iPad connection cable connector inserted in the
iPhone, iPad, or iPod touch and then repeat the procedure from step 1
of Connections.
If the screen above still does not appear, restart the iPhone or iPad
after performing the procedure of Connections to step 2 and then
perform the procedure of Starting the system.
O
T
djay 2 for
iPad
Caution
H
S
DE
T
LE
AM
PL
ER
The minimum system requirements for using djay 2 for iPad/iPhone or
vjay for iPad/iPhone in combination with the unit are as follows.
For the latest system requirements for djay 2 for iPad/iPhone and vjay for
iPad/iPhone, check the App Store.
SE
AR
CH
System requirements
djay 2 for iPad/iPhone, vjay for iPad/iPhone
djay 2 for iPad/iPhone, vjay for iPad/iPhone
S
E
DE
T
LE
E
Operation
1 LOAD button
Connections
2 Rotary selector
For the connection procedure, see “Connections” in Operating
Instructions (DJ unit Setup).
1 Press the rotary selector, move the cursor to the
library on the computer’s screen, then turn the rotary
selector and select the track.
1 Connect this unit and the iPhone or iPad using the
iPhone/iPad connection cable.
2 Press the [STANDBY/ON] button on the unit to turn
on the power.
2 Press the [LOAD] button to load the selected track
onto the deck.
After the startup illumination ends, the unit is ready for use.
En
3
Playing tracks and outputting the sound
Monitoring sound with headphones
The following describes the procedure for outputting the sound of the
left deck as an example.
! Set the volume of the device connected to the [MASTER OUT] terminals (power amplifier, powered speakers, etc.) to an appropriate
level. Note that the output sound may be loud if the volume is set too
high.
1 Set the positions of the controls, etc., as shown below.
Turned fully counterclockwise
3 Turn the [HEADPHONES VOL] control.
STANDBY O
MIC VOL
Adjust the sound level output from the headphones to an appropriate
level.
MASTER VOL
A
LOAD
B
BROWSE BACK
2X
FX1
9
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
SEL
ECT
DJ CONTROLLER
FX2
FX
3
VOL
MID
MID
4
CH
AR
SE
SELECT
SEL
ECT
FX2
FX
2X
1/
5
LOW
FX1
2X
SE
AR
CH
JOG
FX
AL
MANU
LOAD
HI
HI
3
OP
LO
Position
HEADPHONES VOL control
2 Press the [HEADPHONES SELECT A] button.
Mixer section
P
OO
OL
Names of controls, etc.
LOW
The sound of the microphone connected to the [MIC] terminal can be
mixed.
1 Connect the microphone to the [MIC] terminal.
MASTER
6
A
Inputting the sound of the microphone
B
2 Adjust the audio level input to the [MIC] terminal.
!
!
!
O
T
H
7
AM
PL
ER
CU
E
SHIFT
Turn the [MIC VOL] control: The [MIC] terminal’s input audio level is
adjusted.
Only the volume of the microphone’s sound can be adjusted.
The sound of the microphone is not output from the headphones.
S
DE
LE
TE
Quitting the system
8
3 MIC VOL control
1 Quit djay 2 for iPad/iPhone or vjay for iPad/iPhone.
4 EQ (HI, MID, LOW) controls
2 Press the [STANDBY/ON] button until the unit enters
standby.
5 HEADPHONES VOL control
6 HEADPHONES SELECT A button
3 Disconnect the iPhone/iPad connection cable from the
iPhone or iPad.
7 Channel fader
8 Crossfader
Note
9 MASTER VOL control
1 Set the positions of the controls, etc., as shown below.
Names of controls, etc.
Position
EQ (HI, MID, LOW) controls
Center
Channel fader
Moved forward
Crossfader
Left edge
MASTER VOL control
Turned fully counterclockwise
2 Press the play/pause button to play the track.
TEMPO
TEMPO
STANDBY ON
MIC VOL
MASTER VOL
LOAD
A
BROWSE BACK
FX1
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX2
VOL
MID
FX
3
CH
AR
SE
SYNC
LOW
MID
LOW
SELECT
2X
FX1
SEL
ECT
FX2
FX
3
SE
AR
CH
2X
LOAD
HI
HI
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
B
SYNC
MASTER
A
O
T
H
S
DE
T
LE
AM
PL
ER
O
T
AM
PL
ER
H
CU
E
SHIFT
CU
E
SHIFT
B
S
E
DE
T
LE
E
3 Move the channel fader away from you.
4 Turn the [MASTER VOL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER OUT] terminals to an
appropriate level.
4
En
The software manuals of djay 2 for iPad/iPhone and vjay for iPad/iPhone
can be downloaded from the algoriddim website.
For details, see [Software Info] of [DDJ-WeGO3] on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
djay for Mac
djay for Mac is a DJ software application by algoriddim. DJ performances are possible by connecting the computer on which this software
is installed to this unit.
The following describes how to install djay for Mac. Be sure to read these
instructions before installation.
! Before installing djay for Mac, be sure to log in with administrator
privileges.
! djay for Mac is DJ software specifically for Macintosh.
! Some music data purchased from iTunes Store (excluding iTunes
Plus) cannot be recorded or monitored due to digital rights management (DRM).
6 Double-click the [djay] icon in the [Applications]
folder to start djay for Mac.
When the software is started for the first time, the software end user
license agreement appears.
Carefully read the software end user license agreement and click
[Agree] if you agree.
If you do not agree, click [Decline] to cancel the installation.
djay for Mac
Before installing djay for Mac
7 Follow the instructions on the displayed screens and
install the software.
When the following screen appears, click [Activate].
Caution
djay for Mac is a product of algoriddim.
Pioneer basically does not accept inquiries on how to operate djay for Mac.
For the functions of djay for Mac and the operating procedures, see
[Software Info] of [DDJ-WeGO3] on the Pioneer DJ support site below.
http://pioneerdj.com/support/
System requirements
Supported operating
systems
CPU and required memory
Mac: OS X v 10.9, 10.8, 10.7
and 10.6
On the following screen, enter the serial number of djay for Mac that is
located at the bottom of the unit and then complete the activation.
Intel® processor, Core™ Duo 1.6 GHz or better
1 GB or more of RAM
Others
Display resolution
Resolution of 1 024 x 768 or greater
Internet connection
An Internet connection is required to download djay
for Mac.
!
!
!
!
!
!
!
For information on the latest system requirements, compatibility, and supported
operating systems, see “Software Info” of “DDJ-WeGO3” on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
Use a computer that meets the system requirements described above. The
system requirements for DJ software may differ.
Full functionality is not guaranteed on all computers, even those meeting the
operating environment requirements described above.
Even with the required memory indicated for the operating environment above,
lack of memory due to resident programs, the number of services, etc., could
prevent the software from offering optimal functionality and performance. In
such cases, free up sufficient memory.
Depending on the power-saving settings and other conditions of the computer,
the CPU and hard disk processing capacity may be insufficient. In particular,
when using a notebook computer, connect an AC power supply and always use
the computer with the settings configured for high performance.
Problems may occur with operation depending on the other software that you
use.
Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
Installing djay for Mac
Installation Procedure
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [djay / vjay Support Informaiton] and then click
the link to the djay for Mac download page.
The djay for Mac download page appears.
3 Download djay for Mac.
4 Extract the downloaded file.
5 Move the [djay] icon which is displayed after
extracting the file to the [Applications] folder.
If you perform operation as described in the instructions on the screens,
djay for Mac will start.
8 Quit djay for Mac.
The installation is now complete.
Operation
Connections
For the connection procedure, see “Connections” in Operating
Instructions (DJ unit Setup).
1 Connect this unit to your computer via a USB cable.
2 Turn on the computer’s power.
3 Press the [STANDBY/ON] button on the unit to turn
on the power.
After the startup illumination ends, the unit is ready for use.
Starting the system
1 In Finder, open the [Applications] folder, then click
the [djay] icon.
2 When djay for Mac starts, the sound output settings
screen appears. Confirm that the [Main Output] and [PreCueing] check boxes are selected and then click [OK].
!
To output sound from the computer’s speaker, clear the [Main
Output] check box.
En
5
Confirming and changing the audio
device settings
If sound is not output or you wish to change the sound output destination, confirm or change the audio device settings as described below.
Caution
The audio device settings may change depending on the startup order of
this unit and djay for Mac. Confirm the settings each time djay for Mac
starts.
Playing tracks and outputting the sound
The following describes the procedure for outputting the sound of the
left deck as an example.
! Set the volume of the device connected to the [MASTER OUT] terminals (power amplifier, powered speakers, etc.) to an appropriate
level. Note that the output sound may be loud if the volume is set too
high.
Mixer section
STANDBY O
1 From the menu bar, select [djay] > [Preference].
P
OO
OL
OP
LO
2X
FX1
9
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX
3
VOL
MID
MID
4
5
LOW
SELECT
FX1
2X
SEL
ECT
FX2
FX
LOW
MASTER
6
A
B
SHIFT
O
T
H
7
AM
PL
ER
CU
E
1
LOAD
HI
FX2
The following describes the procedure for loading tracks onto the left
deck as an example.
A
B
BROWSE BACK
HI
JOG
FX
AL
MANU
Loading tracks and playing them
LOAD
A
LOAD
3
CH
AR
SE
To output master and monitor audio from the unit, configure the settings
as follows.
— [Main Output]: [PIONEER DDJ-WeGO3 Audio Out/ch 1-2]
— [Pre-Cueing]: [PIONEER DDJ-WeGO3 Audio Out/ch 3-4]
— [Microphone]: Clear the check box.
! [Pre-Cueing] may be set to [ch 1-2] immediately after installation. If
it is, change [Pre-Cueing] to [ch 3-4].
MASTER VOL
SE
AR
CH
2 Select [Devices], set the master and monitor audio
output methods, and click [Apply].
MIC VOL
S
DE
LE
TE
8
BROWSE BACK
3 MIC VOL control
2
HI
4 EQ (HI, MID, LOW) controls
TEMPO
TEMPO
STANDBY ON
MIC VOL
5 HEADPHONES VOL control
MASTER VOL
LOAD
A
BROWSE BACK
FX1
LOAD
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX2
VOL
MID
FX
3
CH
AR
SE
SYNC
LOW
MID
LOW
SELECT
2X
FX1
6 HEADPHONES SELECT A button
SEL
ECT
FX2
FX
3
SE
AR
CH
2X
B
HI
HI
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SYNC
7 Channel fader
MASTER
A
9 MASTER VOL control
O
T
H
S
DE
T
LE
AM
PL
ER
O
T
AM
PL
ER
H
CU
E
SHIFT
CU
E
SHIFT
8 Crossfader
B
S
E
DE
T
LE
E
1 LOAD button
2 Rotary selector
1 Press the rotary selector, move the cursor to the
library on the computer’s screen, then turn the rotary
selector and select the track.
1 Set the positions of the controls, etc., as shown below.
Names of controls, etc.
Position
EQ (HI, MID, LOW) controls
Center
Channel fader
Moved forward
Crossfader
Left edge
MASTER VOL control
Turned fully counterclockwise
2 Press the play/pause button to play the track.
TEMPO
2 Press the [LOAD] button to load the selected track
onto the deck.
TEMPO
STANDBY ON
MIC VOL
MASTER VOL
LOAD
A
BROWSE BACK
FX1
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX2
VOL
MID
FX
3
CH
AR
SE
SYNC
LOW
MID
LOW
SELECT
2X
FX1
SEL
ECT
FX2
FX
3
SE
AR
CH
2X
LOAD
HI
HI
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
B
SYNC
MASTER
A
O
T
H
S
DE
T
LE
AM
PL
ER
O
T
AM
PL
ER
H
CU
E
SHIFT
CU
E
SHIFT
B
S
E
DE
T
LE
E
3 Move the channel fader away from you.
4 Turn the [MASTER VOL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER OUT] terminals to an
appropriate level.
6
En
Monitoring sound with headphones
Names of controls, etc.
Position
HEADPHONES VOL control
Turned fully counterclockwise
djay for Mac
1 Set the positions of the controls, etc., as shown below.
2 Press the [HEADPHONES SELECT A] button.
3 Turn the [HEADPHONES VOL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Inputting the sound of the microphone
The sound of the microphone connected to the [MIC] terminal can be
mixed.
1 Connect the microphone to the [MIC] terminal.
2 Adjust the audio level input to the [MIC] terminal.
!
!
!
Turn the [MIC VOL] control: The [MIC] terminal’s input audio level is
adjusted.
Only the volume of the microphone’s sound can be adjusted.
The sound of the microphone is not output from the headphones.
Quitting the system
1 Quit djay for Mac.
2 Press the [STANDBY/ON] button until the unit enters
standby.
3 Disconnect the USB cable from your computer.
Note
The software manual of djay for Mac can be downloaded from the
algoriddim website.
For details, see [Software Info] of [DDJ-WeGO3] on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
En
7
Serato DJ Intro
b
Before installing Serato DJ Intro
Installing the exclusive driver software
for this unit on your computer
This driver software is an exclusive ASIO driver for outputting audio
signals from the computer.
! There is no need to install the driver software when using Mac.
Proceed to Installation procedure (Mac OS X) of Installing Serato DJ
Intro.
System requirements
Supported operating systems
Windows® 8.1/8, Windows® 8.1/8 Pro
Windows® 7 Home Premium/Professional/Ultimate
32-bit version
1
64-bit version
1
32-bit version
1
64-bit version
1
1
1
1 When using a 64-bit version of Windows, the driver software can only be used for
32-bit applications.
Downloading the latest driver software
See [Software Download] under [DDJ-WeGO3] on the Pioneer DJ
support site below, and download the latest exclusive driver software for
this unit.
http://pioneerdj.com/support/
Before installing the driver software
!
!
Press the [STANDBY/ON] button for at least 1 second, set this unit
on standby status, and remove the USB cable that connects the unit
and the computer.
If any other programs are running on the computer, quit them.
Software end user license agreement
This Software End User License Agreement (“Agreement”) is between
you (both the individual installing the Program and any single legal
entity for which the individual is acting) (“You” or “Your”) and PIONEER
CORPORATION (“Pioneer”).
TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS
THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT.
PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS
EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS.
WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE
THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT
AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT
AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT
OR UNINSTALL IT, AS APPLICABLE.
1 DEFINITIONS
1 “Documentation” means written documentation, specifications
and help content made generally available by Pioneer to aid in
installing and using the Program.
2 “Program” means all or any part of Pioneer’s software licensed to
You by Pioneer under this Agreement.
2 PROGRAM LICENSE
1 Limited License. Subject to this Agreement’s restrictions,
Pioneer grants to You a limited, non-exclusive, non-transferable,
license (without the right to sublicense):
a To install a single copy of the Program in Your computer or
mobile device, to use the Program only for Your personal purpose complying with this Agreement and the Documentation
(“Authorized Use”);
8
En
To use the Documentation in support of Your Authorized Use;
and
c To make one copy of the Program solely for backup purposes, provided that all titles and trademark, copyright and
restricted rights notices are reproduced on the copy.
2 Restrictions. You will not copy or use the Program or
Documentation except as expressly permitted by this Agreement.
You will not transfer, sublicense, rent, lease or lend the Program,
or use it for third-party training, commercial time-sharing or
service bureau use. You will not Yourself or through any third
party modify, reverse engineer, disassemble or decompile the
Program, except to the extent expressly permitted by applicable
law, and then only after You have notified Pioneer in writing of
Your intended activities.
3 Ownership. Pioneer or its licensor retains all right, title and
interest in and to all patent, copyright, trademark, trade secret
and other intellectual property rights in the Program and
Documentation, and any derivative works thereof. You do not
acquire any other rights, express or implied, beyond the limited
license set forth in this Agreement.
4 No Support. Pioneer has no obligation to provide support,
maintenance, upgrades, modifications or new releases for the
Program or Documentation under this Agreement.
3 WARRANTY DISCLAIMER
THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS”
WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU
AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST EXTENT
PERMISSIBLE BY LAW, PIONEER EXPRESSLY DISCLAIMS ALL
WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND
DOCUMENTATION, WHETHER EXPRESS, IMPLIED, STATUTORY,
OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF
DEALING OR USAGE OF TRADE, INCLUDING ANY WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
SATISFACTORY QUALITY, ACCURACY, TITLE OR NON-INFRINGEMENT.
4 EXPORT CONTROL AND COMPLIANCE WITH LAWS
AND REGULATIONS
You may not use or otherwise export or re-export the Program except as
authorized by United States law and the laws of the jurisdiction in which
the Program was obtained. In particular, but without limitation, the
Program may not be exported or re-exported (a) into any U.S.-embargoed
countries or (b) to anyone on the U.S. Treasury Department's Specially
Designated Nationals List or the U.S. Department of Commerce Denied
Persons List or Entity List. By using the Program, you represent and warrant that you are not located in any such country or on any such list. You
also agree that you will not use the Program for any purposes prohibited
by United States law, including, without limitation, the development,
design, manufacture, or production of nuclear, missile, or chemical or
biological weapons.
5 U.S. GOVERNMENT RESTRICTED RIGHTS
The Program and Documentations are “commercial computer software”
and “commercial computer software documentation” as those terms
are defined in 48 C.F.R. §252.227-7014 (a) (1) (2007) and 252.227-7014
(a) (5) (2007). The U.S. Government’s rights with respect to the Program
and Documentations are limited by this license pursuant to 48 C.F.R. §
12.212 (Computer software) (1995) and 48 C.F.R. §12.211 (Technical data)
(1995) and/or 48 C.F.R. §227.7202-3, as applicable. As such, the Program
and Documentations are being licensed to the U.S. Government end
users: (a) only as “commercial items” as that term is defined in 48 C.F.R.
§2.101 generally and as incorporated in DFAR 212.102; and (b) with only
those limited rights as are granted to the public pursuant to this license.
Under no circumstance will the U.S. Government or its end users be
granted any greater rights than we grant to other users, as provided for
in this license. Manufacturer is Pioneer Corporation, 1-1 Shin-Ogura,
Saiwai-ku, Kawasaki-shi, Kanagawa-Ken, 212-0031 Japan
6 DAMAGES AND REMEDIES FOR BREACH
You agree that any breach of this Agreement’s restrictions would cause
Pioneer irreparable harm for which money damages alone would be
inadequate. In addition to damages and any other remedies to which
Pioneer may be entitled, You agree that Pioneer may seek injunctive
relief to prevent the actual, threatened or continued breach of this
Agreement.
Installation Procedure
Do not connect this unit and the computer until installation is
completed.
!
7 TERMINATION
!
Pioneer may terminate this Agreement at any time upon Your breach
of any provision. If this Agreement is terminated, You will stop using
the Program, permanently delete it from your computer or mobile
device where it resides, and destroy all copies of the Program and
Documentation in Your possession, confirming to Pioneer in writing that
You have done so. Sections 2.2, 2.3, 2.4, 3, 4, 5, 6, 7 and 8 will continue in
effect after this Agreement’s termination.
1 Download the driver installer from the Pioneer DJ
support site.
8 GENERAL TERMS
1 Limitation of Liability. In no event will Pioneer or its subsidiaries
be liable in connection with this Agreement or its subject matter,
under any theory of liability, for any indirect, incidental, special,
consequential or punitive damages, or damages for lost profits,
revenue, business, savings, data, use, or cost of substitute procurement, even if advised of the possibility of such damages or if
such damages are foreseeable. In no event will Pioneer’s liability
for all damages exceed the amounts actually paid by You to
Pioneer or its subsidiaries for the Program. The parties acknowledge that the liability limits and risk allocation in this Agreement
are reflected in the Program price and are essential elements of
the bargain between the parties, without which Pioneer would
not have provided the Program or entered into this Agreement.
2 The limitations or exclusions of warranties and liability contained
in this Agreement do not affect or prejudice Your statutory rights
as consumer and shall apply to You only to the extent such limitations or exclusions are permitted under the laws of the jurisdiction where You are located.
3 Severability and Waiver. If any provision of this Agreement is held
to be illegal, invalid or otherwise unenforceable, that provision
will be enforced to the extent possible or, if incapable of enforcement, deemed to be severed and deleted from this Agreement,
and the remainder will continue in full force and effect. The
waiver by either party of any default or breach of this Agreement
will not waive any other or subsequent default or breach.
4 No Assignment. You may not assign, sell, transfer, delegate or
otherwise dispose of this Agreement or any rights or obligations
under it, whether voluntarily or involuntarily, by operation of law
or otherwise, without Pioneer’s prior written consent. Any purported assignment, transfer or delegation by You will be null and
void. Subject to the foregoing, this Agreement will be binding
upon and will inure to the benefit of the parties and their respective successors and assigns.
5 Entire Agreement. This Agreement constitutes the entire agreement between the parties and supersedes all prior or contemporaneous agreements or representations, whether written or
oral, concerning its subject matter. This Agreement may not be
modified or amended without Pioneer’s prior and express written
consent, and no other act, document, usage or custom will be
deemed to amend or modify this Agreement.
6 You agree that this Agreement shall be governed and construed
by and under the laws of Japan.
2 When downloading is complete, double-click the
[Pioneer_DDJ_WeGO3_Driver_x.xxx.exe] icon.
Serato DJ Intro
Log on as the user which was set as the computer’s administrator
before installing.
If any other programs are running on the computer, quit them.
3 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the Serato DJ Intro software.
Installing Serato DJ Intro
About Serato DJ Intro
Serato DJ Intro is a DJ software application by Serato. DJ performances
are possible by connecting the computer on which this software is
installed to this unit.
System requirements
Supported operating
systems
CPU and required memory
Mac: OS X v 10.9, 10.8, 10.7
and 10.6
Windows: Windows 8.1/8
and Windows 7 (SP1)
Intel® processor, Core™ Duo 1.6 GHz or better
Intel® processor, Core™ i3, i5, or i7
1 GB or more of RAM
Intel® processor, Core™ 2 Duo 2.0 GHz or better
Intel® processor, Core™ i3, i5, or i7
1 GB or more of RAM
Others
USB port
A USB 2.0 port is required to connect the computer
with this unit.
Display resolution
Resolution of 1 024 x 768 or greater
Internet connection
An Internet connection is required for registering
the “Serato.com” user account and downloading the
software.
!
!
!
!
!
!
!
!
For information on the latest system requirements, compatibility, and supported
operating systems, see “Software Info” of “DDJ-WeGO3” on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
Use a computer that meets the system requirements described above. The
system requirements for DJ software may differ.
Full functionality is not guaranteed on all computers, even those meeting the
operating environment requirements described above.
Even with the required memory indicated for the operating environment above,
lack of memory due to resident programs, the number of services, etc., could
prevent the software from offering optimal functionality and performance. In
such cases, free up sufficient memory.
Depending on the power-saving settings and other conditions of the computer,
the CPU and hard disk processing capacity may be insufficient. In particular,
when using a notebook computer, connect an AC power supply and always use
the computer with the settings configured for high performance.
Problems may occur with operation depending on the other software that you
use.
Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
Operation is not guaranteed with AMD CPUs.
En
9
Installation procedure (Windows)
8 Click [Finish] to quit the Serato DJ Intro installer.
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [Serato DJ Support Information] and then click
the link to the Serato DJ Intro download page.
The Serato DJ Intro download page appears.
3 Log in to your “Serato.com” user account.
!
!
!
!
If you have already registered a user account on “Serato.com”, proceed to step 5.
If you have not completed registering your user account, do so following the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the region
in which you live.
— If you check [E-mail me Serato newsletters], newsletters providing the latest information on Serato products will be sent from
Serato.
— Once user account registration is completed, you will receive an
e-mail at the e-mail address you have input. Check the contents
of the e-mail sent from “Serato.com”.
Be careful not to forget the e-mail address and password specified
when you performed user registration. They will be required for
updating the software.
The personal information input when registering a new user account
may be collected, processed and used based on the privacy policy on
the Serato website.
4 Click the link in the e-mail message sent from “Serato.
com”.
This takes you to the Serato DJ Intro download page. Proceed to step 6.
5 Log in.
Input the e-mail address and password you have registered to log in to
“Serato.com”.
The installation is now complete.
Installation procedure (Mac OS X)
Do not connect this unit and the computer until installation is
completed.
!
If any other programs are running on the computer, quit them.
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [Serato DJ Support Information] and then click
the link to the Serato DJ Intro download page.
The Serato DJ Intro download page appears.
3 Log in to your “Serato.com” user account.
!
!
6 Download the Serato DJ Intro software from the
download page.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.
7 Read the terms of the license agreement carefully,
and if you agree, select [I accept the agreement], then
click [Next].
!
!
If you have already registered a user account on “Serato.com”, proceed to step 5.
If you have not completed registering your user account, do so following the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the region
in which you live.
— If you check [E-mail me Serato newsletters], newsletters providing the latest information on Serato products will be sent from
Serato.
— Once user account registration is completed, you will receive an
e-mail at the e-mail address you have input. Check the contents
of the e-mail sent from “Serato.com”.
Be careful not to forget the e-mail address and password specified
when you performed user registration. They will be required for
updating the software.
The personal information input when registering a new user account
may be collected, processed and used based on the privacy policy on
the Serato website.
4 Click the link in the e-mail message sent from “Serato.
com”.
This takes you to the Serato DJ Intro download page. Proceed to step 6.
5 Log in.
Input the e-mail address and password you have registered to log in to
“Serato.com”.
!
If you do not agree to the contents of the license agreement, click
[Cancel] to cancel installation.
Installation begins.
The message of successful installation appears once installation is
completed.
10
En
6 Download the Serato DJ Intro software from the
download page.
Unzip the downloaded file, then double-click the unzipped file to launch
the installer.
7 Read the terms of the license agreement carefully,
and if you agree, click [Agree].
If breaks in the sound occur with the default
setting
1 Launch [DDJ_WeGO3 ASIO Settings Utility] and
change [Kernel Buffers] to [4].
If no breaks in the sound occur with the default
setting
!
If you do not agree to the contents of the usage agreement, click
[Disagree] to cancel installation.
8 If the following screen appears, drag and drop the
[Serato DJ Intro] icon on the [Applications] folder icon.
Serato DJ Intro
2 Set [USB BUFFER SIZE (LATENCY)] in the Serato DJ
Intro software to the minimum buffer size at which no
breaks in the sound occur.
1 Set [USB BUFFER SIZE (LATENCY)] in the Serato DJ
Intro software to the minimum buffer size at which no
breaks in the sound occur.
2 Launch [DDJ_WeGO3 ASIO Settings Utility], change
[Kernel Buffers] to [2], and check that no breaks in the
sound occur.
3 If no breaks in the sound occur, set [USB BUFFER
SIZE (LATENCY)] in the Serato DJ Intro software to the
minimum buffer size at which no breaks in the sound
occur. If breaks in the sound do occur, change [Kernel
Buffers] in the [DDJ_WeGO3 ASIO Settings Utility] to [3].
Checking the version of the driver
software
About the driver software and
setting utility software
This unit functions as an audio device conforming to the ASIO
standards.
Using the settings utility software
Click the Windows [Start] menu>[All Programs]>
[Pioneer]>[DDJ_WeGO3]>[DDJ_WeGO3 Version Display
Utility].
!
!
!
For Windows 8, click [DDJ_WeGO3 Version Display Utility] from
the [Start] screen.
You can check the firmware version of this unit on the screen.
The firmware version is not displayed when this unit is not connected
to the computer or when this unit and computer are not properly
communicating.
This function can only be used by those using a Windows operating
system.
Launching the settings utility software
Click the Windows [Start] menu>[All Programs]>
[Pioneer]>[DDJ_WeGO3]>[DDJ_WeGO3 ASIO Settings
Utility].
!
For Windows 8, click [DDJ_WeGO3 ASIO Settings Utility] from the
[Start] screen.
Adjusting the buffer size
In the same way as the buffer size setting in the Serato DJ Intro software,
decreasing the value of the [Kernel Buffers] setting lowers the transfer
delay (latency) of the audio data, while increasing the value reduces the
tendency for dropouts in the audio data (breaks in the sound).
The setting at [USB BUFFER SIZE (LATENCY)] in the Serato DJ Intro software’s [SETUP] menu has priority for the buffer size. (The default setting
is 512 samples/10 ms.)
! For details on making the settings on the DJ software, see the Serato
DJ Intro software manual.
! If the [Buffer Size] or [Kernel Buffers] number is made large, drops
in the data (breaks in the sound), etc., occur less easily, but the time
lag due to transmission delays in the audio data (latency) increases.
En
11
Operation
Connections
For the connection procedure, see “Connections” in Operating Instructions (DJ unit Setup).
1 Connect this unit to your computer via a USB cable.
2 Turn on the computer’s power.
Cautions for people using Windows
When you connect this unit to a computer for the first time or connect it to a different USB terminal, the [Installing device driver software] alert may
appear. If it appears, wait until the installation finishes. At that time, the [Device driver software was not successfully installed] alert will appear,
but there will be no influence on the operation of this unit so proceed to the next step.
! If you click the alert, you can confirm details on the alert.
The installation is successful if the device driver software other than [iAP Interface] is installed correctly.
3 Press the [STANDBY/ON] button on the unit to turn on the power.
After the startup illumination ends, the unit is ready for use.
Starting the system
Launching Serato DJ Intro
For detailed instructions on operating the Serato DJ Intro software, see the Serato DJ Intro software manual.
For Windows 7
From the Windows [Start] menu, click the [Serato DJ Intro] icon under [All Programs] > [Serato] > [DJ Intro].
For Windows 8
From [Apps view], click the [Serato DJ Intro] icon.
For Mac OS X
In Finder, open the [Applications] folder, then click the [Serato DJ Intro] icon.
Computer screen directly after the Serato DJ Intro software is launched
A
C
Computer screen when a track is loaded in the Serato DJ Intro software
A
C
12
En
B
A
A Deck section
The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.
B Waveform display
The loaded track’s waveform is displayed here.
C Browser section
Serato DJ Intro
Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.
Importing tracks
The following describes the typical procedure for importing tracks.
! There are various ways to import tracks with the Serato DJ Intro software. For details, see the Serato DJ Intro software manual.
! If you are already using Serato DJ software (Scratch Live, ITCH or Serato DJ) and have already created track libraries, the track libraries you have
previously created can be used as such.
1 Click the [Files] key on the Serato DJ Intro software screen to open the [Files] panel.
The contents of your computer or the peripheral connected to the computer are displayed in the [Files] panel.
2 Click the folder on the [Files] panel containing the tracks you want to add to the library to select it.
3 On the Serato DJ Intro software screen, drag and drop the selected folder to the crates panel.
A crate is created and the tracks are added to the library.
a
b
a
b
[Files] panel
Crates panel
Loading tracks and playing them
The following describes the procedure for loading tracks onto the left
deck as an example.
A
LOAD
1
BROWSE BACK
2
HI
TEMPO
TEMPO
STANDBY ON
MIC VOL
A
BROWSE BACK
FX1
LOAD
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX2
FX
3
CH
AR
SE
SYNC
MID
VOL
MID
LOW
SELECT
LOW
2X
FX1
SEL
ECT
FX2
FX
3
SE
AR
CH
2X
2X
1/
B
HI
HI
JOG
FX
AL
MANU
OP
LO
a
MASTER VOL
LOAD
OP
LO
TO
AU
1 Press the rotary selector, move the cursor to the
library on the computer’s screen, then turn the rotary
selector and select the track.
b
SYNC
MASTER
A
Library
Crates panel
O
T
H
S
DE
T
LE
AM
PL
ER
O
T
AM
PL
ER
H
CU
E
SHIFT
CU
E
SHIFT
a
b
B
S
E
DE
T
LE
E
2 Press the [LOAD] button to load the selected track
onto the deck.
1 LOAD button
2 Rotary selector
En
13
Playing tracks and outputting the sound
Monitoring sound with headphones
The following describes the procedure for outputting the sound of the
left deck as an example.
! Set the volume of the device connected to the [MASTER OUT] terminals (power amplifier, powered speakers, etc.) to an appropriate
level. Note that the output sound may be loud if the volume is set too
high.
1 Set the positions of the controls, etc., as shown below.
Turned fully counterclockwise
3 Turn the [HEADPHONES VOL] control.
STANDBY O
MIC VOL
Adjust the sound level output from the headphones to an appropriate
level.
MASTER VOL
A
LOAD
B
BROWSE BACK
2X
FX1
9
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
SEL
ECT
DJ CONTROLLER
FX2
FX
3
VOL
MID
MID
4
CH
AR
SE
SELECT
SEL
ECT
FX2
FX
2X
1/
5
LOW
FX1
2X
SE
AR
CH
JOG
FX
AL
MANU
LOAD
HI
HI
3
OP
LO
Position
HEADPHONES VOL control
2 Press the [HEADPHONES SELECT A] button.
Mixer section
P
OO
OL
Names of controls, etc.
LOW
The sound of the microphone connected to the [MIC] terminal can be
mixed.
1 Connect the microphone to the [MIC] terminal.
MASTER
6
A
Inputting the sound of the microphone
B
2 Adjust the audio level input to the [MIC] terminal.
!
!
!
O
T
H
7
AM
PL
ER
CU
E
SHIFT
Turn the [MIC VOL] control: The [MIC] terminal’s input audio level is
adjusted.
Only the volume of the microphone’s sound can be adjusted.
The sound of the microphone is not output from the headphones.
S
DE
LE
TE
Quitting the system
8
3 MIC VOL control
1 Quit Serato DJ Intro.
4 EQ (HI, MID, LOW) controls
When the software is closed, a message for confirming that you want to
close it appears on the computer’s screen. Click [Yes] to close.
5 HEADPHONES VOL control
6 HEADPHONES SELECT A button
2 Press the [STANDBY/ON] button until the unit enters
standby.
7 Channel fader
3 Disconnect the USB cable from your computer.
8 Crossfader
Note
9 MASTER VOL control
1 Set the positions of the controls, etc., as shown below.
Names of controls, etc.
Position
EQ (HI, MID, LOW) controls
Center
Channel fader
Moved forward
Crossfader
Left edge
MASTER VOL control
Turned fully counterclockwise
2 Press the play/pause button to play the track.
TEMPO
TEMPO
STANDBY ON
MIC VOL
MASTER VOL
LOAD
A
BROWSE BACK
FX1
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX2
VOL
MID
FX
3
CH
AR
SE
SYNC
LOW
MID
LOW
SELECT
2X
FX1
SEL
ECT
FX2
FX
3
SE
AR
CH
2X
LOAD
HI
HI
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
B
SYNC
MASTER
A
O
T
H
S
DE
T
LE
AM
PL
ER
O
T
AM
PL
ER
H
CU
E
SHIFT
CU
E
SHIFT
B
S
E
DE
T
LE
E
3 Move the channel fader away from you.
4 Turn the [MASTER VOL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER OUT] terminals to an
appropriate level.
14
En
The software manual of Serato DJ Intro can be downloaded from the
Serato website.
For details, see [Software Info] of [DDJ-WeGO3] on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
Upgrading
This unit is also compatible with the Serato DJ Intro upgrade version
Serato DJ.
For details on the upgrade, see [Serato DJ Support Information] of
[Software Info] of [DDJ-WeGO3] on the Pioneer DJ support site below.
http://pioneerdj.com/support/
VirtualDJ LE 8
b
Before installing VirtualDJ LE 8
This driver software is an exclusive ASIO driver for outputting audio
signals from the computer.
! There is no need to install the driver software when using Mac.
Proceed to Installation procedure (Mac OS X) of Installing VirtualDJ LE 8.
System requirements
Supported operating systems
Windows® 8.1/8, Windows® 8.1/8 Pro
Windows® 7 Home Premium/Professional/Ultimate
32-bit version
1
64-bit version
1
32-bit version
1
64-bit version
1
1
1
1 When using a 64-bit version of Windows, the driver software can only be used for
32-bit applications.
Downloading the latest driver software
See [Software Download] under [DDJ-WeGO3] on the Pioneer DJ
support site below, and download the latest exclusive driver software for
this unit.
http://pioneerdj.com/support/
Before installing the driver software
!
!
Press the [STANDBY/ON] button for at least 1 second, set this unit
on standby status, and remove the USB cable that connects the unit
and the computer.
If any other programs are running on the computer, quit them.
Software end user license agreement
This Software End User License Agreement (“Agreement”) is between
you (both the individual installing the Program and any single legal
entity for which the individual is acting) (“You” or “Your”) and PIONEER
CORPORATION (“Pioneer”).
TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS
THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT.
PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS
EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS.
WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE
THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT
AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT
AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT
OR UNINSTALL IT, AS APPLICABLE.
1 DEFINITIONS
1 “Documentation” means written documentation, specifications
and help content made generally available by Pioneer to aid in
installing and using the Program.
2 “Program” means all or any part of Pioneer’s software licensed to
You by Pioneer under this Agreement.
2 PROGRAM LICENSE
1 Limited License. Subject to this Agreement’s restrictions,
Pioneer grants to You a limited, non-exclusive, non-transferable,
license (without the right to sublicense):
a To install a single copy of the Program in Your computer or
mobile device, to use the Program only for Your personal purpose complying with this Agreement and the Documentation
(“Authorized Use”);
VirtualDJ LE 8
Installing the exclusive driver software
for this unit on your computer
To use the Documentation in support of Your Authorized Use;
and
c To make one copy of the Program solely for backup purposes, provided that all titles and trademark, copyright and
restricted rights notices are reproduced on the copy.
2 Restrictions. You will not copy or use the Program or
Documentation except as expressly permitted by this Agreement.
You will not transfer, sublicense, rent, lease or lend the Program,
or use it for third-party training, commercial time-sharing or
service bureau use. You will not Yourself or through any third
party modify, reverse engineer, disassemble or decompile the
Program, except to the extent expressly permitted by applicable
law, and then only after You have notified Pioneer in writing of
Your intended activities.
3 Ownership. Pioneer or its licensor retains all right, title and
interest in and to all patent, copyright, trademark, trade secret
and other intellectual property rights in the Program and
Documentation, and any derivative works thereof. You do not
acquire any other rights, express or implied, beyond the limited
license set forth in this Agreement.
4 No Support. Pioneer has no obligation to provide support,
maintenance, upgrades, modifications or new releases for the
Program or Documentation under this Agreement.
3 WARRANTY DISCLAIMER
THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS”
WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU
AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST EXTENT
PERMISSIBLE BY LAW, PIONEER EXPRESSLY DISCLAIMS ALL
WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND
DOCUMENTATION, WHETHER EXPRESS, IMPLIED, STATUTORY,
OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF
DEALING OR USAGE OF TRADE, INCLUDING ANY WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
SATISFACTORY QUALITY, ACCURACY, TITLE OR NON-INFRINGEMENT.
4 EXPORT CONTROL AND COMPLIANCE WITH LAWS
AND REGULATIONS
You may not use or otherwise export or re-export the Program except as
authorized by United States law and the laws of the jurisdiction in which
the Program was obtained. In particular, but without limitation, the
Program may not be exported or re-exported (a) into any U.S.-embargoed
countries or (b) to anyone on the U.S. Treasury Department's Specially
Designated Nationals List or the U.S. Department of Commerce Denied
Persons List or Entity List. By using the Program, you represent and warrant that you are not located in any such country or on any such list. You
also agree that you will not use the Program for any purposes prohibited
by United States law, including, without limitation, the development,
design, manufacture, or production of nuclear, missile, or chemical or
biological weapons.
5 U.S. GOVERNMENT RESTRICTED RIGHTS
The Program and Documentations are “commercial computer software”
and “commercial computer software documentation” as those terms
are defined in 48 C.F.R. §252.227-7014 (a) (1) (2007) and 252.227-7014
(a) (5) (2007). The U.S. Government’s rights with respect to the Program
and Documentations are limited by this license pursuant to 48 C.F.R. §
12.212 (Computer software) (1995) and 48 C.F.R. §12.211 (Technical data)
(1995) and/or 48 C.F.R. §227.7202-3, as applicable. As such, the Program
and Documentations are being licensed to the U.S. Government end
users: (a) only as “commercial items” as that term is defined in 48 C.F.R.
§2.101 generally and as incorporated in DFAR 212.102; and (b) with only
those limited rights as are granted to the public pursuant to this license.
Under no circumstance will the U.S. Government or its end users be
granted any greater rights than we grant to other users, as provided for
in this license. Manufacturer is Pioneer Corporation, 1-1 Shin-Ogura,
Saiwai-ku, Kawasaki-shi, Kanagawa-Ken, 212-0031 Japan
En
15
6 DAMAGES AND REMEDIES FOR BREACH
You agree that any breach of this Agreement’s restrictions would cause
Pioneer irreparable harm for which money damages alone would be
inadequate. In addition to damages and any other remedies to which
Pioneer may be entitled, You agree that Pioneer may seek injunctive
relief to prevent the actual, threatened or continued breach of this
Agreement.
7 TERMINATION
Pioneer may terminate this Agreement at any time upon Your breach
of any provision. If this Agreement is terminated, You will stop using
the Program, permanently delete it from your computer or mobile
device where it resides, and destroy all copies of the Program and
Documentation in Your possession, confirming to Pioneer in writing that
You have done so. Sections 2.2, 2.3, 2.4, 3, 4, 5, 6, 7 and 8 will continue in
effect after this Agreement’s termination.
8 GENERAL TERMS
1 Limitation of Liability. In no event will Pioneer or its subsidiaries
be liable in connection with this Agreement or its subject matter,
under any theory of liability, for any indirect, incidental, special,
consequential or punitive damages, or damages for lost profits,
revenue, business, savings, data, use, or cost of substitute procurement, even if advised of the possibility of such damages or if
such damages are foreseeable. In no event will Pioneer’s liability
for all damages exceed the amounts actually paid by You to
Pioneer or its subsidiaries for the Program. The parties acknowledge that the liability limits and risk allocation in this Agreement
are reflected in the Program price and are essential elements of
the bargain between the parties, without which Pioneer would
not have provided the Program or entered into this Agreement.
2 The limitations or exclusions of warranties and liability contained
in this Agreement do not affect or prejudice Your statutory rights
as consumer and shall apply to You only to the extent such limitations or exclusions are permitted under the laws of the jurisdiction where You are located.
3 Severability and Waiver. If any provision of this Agreement is held
to be illegal, invalid or otherwise unenforceable, that provision
will be enforced to the extent possible or, if incapable of enforcement, deemed to be severed and deleted from this Agreement,
and the remainder will continue in full force and effect. The
waiver by either party of any default or breach of this Agreement
will not waive any other or subsequent default or breach.
4 No Assignment. You may not assign, sell, transfer, delegate or
otherwise dispose of this Agreement or any rights or obligations
under it, whether voluntarily or involuntarily, by operation of law
or otherwise, without Pioneer’s prior written consent. Any purported assignment, transfer or delegation by You will be null and
void. Subject to the foregoing, this Agreement will be binding
upon and will inure to the benefit of the parties and their respective successors and assigns.
5 Entire Agreement. This Agreement constitutes the entire agreement between the parties and supersedes all prior or contemporaneous agreements or representations, whether written or
oral, concerning its subject matter. This Agreement may not be
modified or amended without Pioneer’s prior and express written
consent, and no other act, document, usage or custom will be
deemed to amend or modify this Agreement.
6 You agree that this Agreement shall be governed and construed
by and under the laws of Japan.
Installation Procedure
3 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the VirtualDJ LE 8 software.
Installing VirtualDJ LE 8
About VirtualDJ LE 8
VirtualDJ LE 8 is a DJ software application by Atomix productions. DJ
performances are possible by connecting the computer on which this
software is installed to this unit.
If VIRTUAL DJ is already installed on your computer, VIRTUAL DJ LE
will not operate properly. Uninstall all versions of VIRTUAL DJ already
installed on your computer before installing VirtualDJ LE 8 for this
unit.
For instructions on uninstalling VIRTUAL DJ, see the Pioneer DJ support site below.
http://pioneerdj.com/support/
System requirements
Supported operating
systems
Mac: OS X v 10.9, 10.8
and 10.7
Windows: Windows 8.1/8
and Windows 7
!
Log on as the user which was set as the computer’s administrator
before installing.
If any other programs are running on the computer, quit them.
1 Download the driver installer from the Pioneer DJ
support site.
2 When downloading is complete, double-click the
[Pioneer_DDJ_WeGO3_Driver_x.xxx.exe] icon.
16
En
Intel® processor
1 024 MB or more of RAM
Intel® Pentium® 4 or AMD Athlon™ XP
512 MB or more of RAM
Others
Hard disk
Free space of 20 MB or greater (Windows)
Free space of 30 MB or greater (Mac)
USB port
A USB 2.0 port is required to connect the computer
with this unit.
Internet connection
An Internet connection is required to register the
account and download VirtualDJ LE 8.
The conditions below must be satisfied in order to conduct video mixing.
!
!
!
!
!
!
!
Do not connect this unit and the computer until installation is
completed.
!
CPU and required memory
!
!
Mac
— ATI™ or NVIDIA® video chipset with 256 MB of dedicated DDR3 RAM
— Video card must support dual-screen output.
Windows
— ATI™ or NVIDIA® video card with 256 MB of dedicated DDR3 RAM
— Video card must support dual-screen output.
For information on the latest system requirements, compatibility, and supported
operating systems, see “Software Info” of “DDJ-WeGO3” on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
Use a computer that meets the system requirements described above. The
system requirements for DJ software may differ.
Full functionality is not guaranteed on all computers, even those meeting the
operating environment requirements described above.
Even with the required memory indicated for the operating environment above,
lack of memory due to resident programs, the number of services, etc., could
prevent the software from offering optimal functionality and performance. In
such cases, free up sufficient memory.
Depending on the power-saving settings and other conditions of the computer,
the CPU and hard disk processing capacity may be insufficient. In particular,
when using a notebook computer, connect an AC power supply and always use
the computer with the settings configured for high performance.
Problems may occur with operation depending on the other software that you
use.
Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
4 Click [Install] to start the installation.
Installation procedure (Windows)
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [VirtualDJ Support Information] and then click
the link to the VirtualDJ LE 8 download page.
The VirtualDJ LE 8 download page appears.
VirtualDJ LE 8
3 On the displayed page, input the serial key printed on
this unit’s bottom panel, then click [OK].
4 The download link of the installer is displayed; click
the installer for Windows to perform download.
5 Double-click the downloaded file.
5 Click [Finish].
The installer starts.
6 Follow the instructions on the displayed screens and
install the software.
1 Click [Next].
— To cancel the installation, click [Cancel].
The installation is now complete.
Installation procedure (Mac OS X)
2 Read the terms of the license agreement carefully, and if you agree, select
[I accept the terms in the License Agreement], then click [Next].
— If you do not agree to the contents of the license agreement,
click [Cancel] to cancel installation.
1 Access the Pioneer DJ support site and click [Software
Info] under [DDJ-WeGO3].
2 Click [VirtualDJ Support Information] and then click
the link to the VirtualDJ LE 8 download page.
The VirtualDJ LE 8 download page appears.
3 On the displayed page, input the serial key printed on
this unit’s bottom panel, then click [OK].
4 The download link of the installer is displayed; click
the installer for Mac to perform download.
5 Double-click the downloaded file.
The installer starts.
6 Follow the instructions on the displayed screens and
install the software.
The installation is now complete.
3 Select the type of installation for VirtualDJ LE 8, then click.
Normally select [Typical].
When [Typical] is selected, plug-ins and other components are
installed simultaneously.
About the driver software and
setting utility software
This unit functions as an audio device conforming to the ASIO standards.
Using the settings utility software
This function can only be used by those using a Windows operating
system.
Launching the settings utility software
Click the Windows [Start] menu>[All Programs]>
[Pioneer]>[DDJ_WeGO3]>[DDJ_WeGO3 ASIO Settings
Utility].
!
For Windows 8, click [DDJ_WeGO3 ASIO Settings Utility] from the
[Start] screen.
En
17
Launch [DDJ_WeGO3 ASIO Settings Utility] and change
[Kernel Buffers] to [4].
1 Launch VirtualDJ LE 8.
For Windows 7
From the Windows [Start] menu, click the [All Programs] > [VirtualDJ]
> [VirtualDJ 8] icon.
For Windows 8
From [Apps view], click the [VirtualDJ 8] icon.
For Mac OS X
In Finder, open the [Applications] folder, then double-click the
[VirtualDJ 8] icon.
2 Log in.
!
If no breaks in the sound occur with the default
setting
Launch [DDJ_WeGO3 ASIO Settings Utility], change
[Kernel Buffers] to [2], and check that no breaks in the
sound occur.
!
If breaks in sound occur, change [Kernel Buffers] of [DDJ_WeGO3
ASIO Settings Utility] to [3].
Checking the version of the driver
software
Click the Windows [Start] menu>[All Programs]>
[Pioneer]>[DDJ_WeGO3]>[DDJ_WeGO3 Version Display
Utility].
!
!
!
For Windows 8, click [DDJ_WeGO3 Version Display Utility] from
the [Start] screen.
You can check the firmware version of this unit on the screen.
The firmware version is not displayed when this unit is not connected
to the computer or when this unit and computer are not properly
communicating.
!
You can use VirtualDJ LE 8 without login.
If you do not want to log in, close the login window and proceed to
the next step.
When VirtualDJ LE 8 is started, the login window appears.
— Those who have a Virtual DJ account
Enter necessary information in the login window to log in.
— Those who do not have a Virtual DJ account
From the login window, create a new account and log in.
3 Enter the serial key.
Enter the serial number (XXXX-XXXX-XXXXX/WEGO3) printed on this
unit’s bottom panel as described in the instructions on the screen, then
click [OK].
! When serial key is entered without login, the login window is displayed again. However, you can use VirtualDJ LE 8 without login.
If you do not want to log in, close the login window.
Loading tracks and playing them
The following describes the procedure for loading tracks onto the left
deck as an example.
A
LOAD
1
BROWSE BACK
2
HI
TEMPO
Operation
LOAD
A
BROWSE BACK
LOAD
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX2
FX
3
SYNC
MID
VOL
MID
LOW
SELECT
LOW
2X
FX1
SEL
ECT
FX2
FX
3
SE
AR
CH
FX1
B
HI
HI
JOG
FX
2X
CH
AR
SE
SYNC
MASTER
A
B
SHIFT
O
T
CU
E
SHIFT
H
AM
PL
ER
For the connection procedure, see “Connections” in Operating
Instructions (DJ unit Setup).
MASTER VOL
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
Connections
TEMPO
STANDBY ON
MIC VOL
CU
E
If breaks in the sound occur with the default
setting
Starting the system
O
T
In the same way as the buffer size setting in VirtualDJ LE 8, decreasing the value of the [Kernel Buffers] setting lowers the transfer delay
(latency) of the audio data, while increasing the value reduces the tendency for dropouts in the audio data (breaks in the sound).
! If the [Buffer Size] or [Kernel Buffers] number is made large, drops
in the data (breaks in the sound), etc., occur less easily, but the time
lag due to transmission delays in the audio data (latency) increases.
H
S
1 Connect this unit to your computer via a USB cable.
DE
T
LE
AM
PL
ER
Adjusting the buffer size
S
E
DE
T
LE
E
2 Turn on the computer’s power.
Cautions for people using Windows
When you connect this unit to a computer for the first time or connect
it to a different USB terminal, the [Installing device driver software]
alert may appear. If it appears, wait until the installation finishes. At that
time, the [Device driver software was not successfully installed]
alert will appear, but there will be no influence on the operation of this
unit so proceed to the next step.
! If you click the alert, you can confirm details on the alert.
The installation is successful if the device driver software other than
[iAP Interface] is installed correctly.
3 Press the [STANDBY/ON] button on the unit to turn
on the power.
After the startup illumination ends, the unit is ready for use.
18
En
1 LOAD button
2 Rotary selector
1 Press the rotary selector, move the cursor to the
library on the computer’s screen, then turn the rotary
selector and select the track.
2 Press the [LOAD] button to load the selected track
onto the deck.
Playing tracks and outputting the sound
Monitoring sound with headphones
The following describes the procedure for outputting the sound of the
left deck as an example.
! Set the volume of the device connected to the [MASTER OUT] terminals (power amplifier, powered speakers, etc.) to an appropriate
level. Note that the output sound may be loud if the volume is set too
high.
1 Set the positions of the controls, etc., as shown below.
Turned fully counterclockwise
MIC VOL
Adjust the sound level output from the headphones to an appropriate
level.
MASTER VOL
A
LOAD
B
BROWSE BACK
HI
HI
JOG
FX
AL
MANU
2X
FX1
9
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
SEL
ECT
DJ CONTROLLER
FX2
FX
3
VOL
MID
MID
4
CH
AR
SE
SELECT
SEL
ECT
FX2
FX
2X
1/
5
LOW
FX1
2X
SE
AR
CH
3
LOAD
LOW
The sound of the microphone connected to the [MIC] terminal can be
mixed.
1 Connect the microphone to the [MIC] terminal.
MASTER
6
A
Inputting the sound of the microphone
B
2 Adjust the audio level input to the [MIC] terminal.
!
!
!
O
T
7
Turn the [MIC VOL] control: The [MIC] terminal’s input audio level is
adjusted.
Only the volume of the microphone’s sound can be adjusted.
The sound of the microphone is not output from the headphones.
AM
PL
ER
CU
E
SHIFT
H
VirtualDJ LE 8
3 Turn the [HEADPHONES VOL] control.
STANDBY O
OP
LO
Position
HEADPHONES VOL control
2 Press the [HEADPHONES SELECT A] button.
Mixer section
P
OO
OL
Names of controls, etc.
S
DE
LE
TE
Quitting the system
8
3 MIC VOL control
1 Quit VirtualDJ LE 8.
4 EQ (HI, MID, LOW) controls
5 HEADPHONES VOL control
2 Press the [STANDBY/ON] button until the unit enters
standby.
6 HEADPHONES SELECT A button
3 Disconnect the USB cable from your computer.
7 Channel fader
Note
8 Crossfader
9 MASTER VOL control
1 Set the positions of the controls, etc., as shown below.
Names of controls, etc.
Position
EQ (HI, MID, LOW) controls
Center
Channel fader
Moved forward
Crossfader
Left edge
MASTER VOL control
Turned fully counterclockwise
Upgrading
2 Press the play/pause button to play the track.
TEMPO
TEMPO
STANDBY ON
MIC VOL
Some of the functions of VirtualDJ LE 8 are limited. To use all of the functions, you need to upgrade to Virtual DJ Pro.
For details on the upgrade, see [VirtualDJ Support Information] of
[Software Info] of [DDJ-WeGO3] on the Pioneer DJ support site below.
http://pioneerdj.com/support/
MASTER VOL
LOAD
A
BROWSE BACK
FX1
LOAD
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
SEL
ECT
DJ CONTROLLER
FX2
VOL
MID
FX
3
CH
AR
SE
SYNC
LOW
MID
LOW
SELECT
2X
FX1
SEL
ECT
FX2
FX
3
SE
AR
CH
2X
B
HI
HI
JOG
FX
AL
MANU
OP
LO
TO
AU
OP
LO
2X
1/
The software manual of VirtualDJ LE 8 can be downloaded from the
Atomix productions website.
For details, see [Software Info] of [DDJ-WeGO3] on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
SYNC
MASTER
A
O
T
H
S
DE
T
LE
AM
PL
ER
O
T
AM
PL
ER
H
CU
E
SHIFT
CU
E
SHIFT
B
S
E
DE
T
LE
E
3 Move the channel fader away from you.
4 Turn the [MASTER VOL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER OUT] terminals to an
appropriate level.
En
19
Additional information
Using as a controller for other DJ
software
This unit also outputs the operating data for the buttons and controls in
MIDI format. If you connect a computer with a built-in MIDI-compatible
DJ software via a USB cable, you can operate the DJ software on this
unit. The sound of music files being played on the computer can also be
output from the DDJ-WeGO3.
To use as a controller for other DJ software, first make the DJ software’s
audio and MIDI related settings.
For details, see your DJ software’s operating instructions.
About MIDI messages
For details on this unit’s MIDI messages, see “List of MIDI Messages”.
! “List of MIDI Messages” can be obtained from [MIDI-compatible
software] of [Software Info] of [DDJ-WeGO3] on the Pioneer DJ
support site below.
http://pioneerdj.com/support/
About trademarks and registered
trademarks
!
!
!
!
!
!
Pioneer is a registered trademark of PIONEER CORPORATION.
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
iPhone, iPad, iPod, iPod touch, iTunes, Finder, Mac, Macintosh and
Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
iPad mini and Lightning are trademarks of Apple Inc.
App Store is a service mark of Apple Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean
that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified
by the developer to meet Apple performance standards. Apple is
not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use
of this accessory with iPod, iPhone, or iPad may affect wireless
performance.
!
iOS is a trademark on which Cisco holds the trademark right in the
US and certain other countries.
! Intel and Intel Core are trademarks of Intel Corporation in the U.S.
and/or other countries.
! AMD Athlon is a trademark of Advanced Micro Devices, Inc.
! ASIO is a trademark of Steinberg Media Technologies GmbH.
! djay and vjay are trademarks of Algoriddim GmbH.
! VirtualDJ is a registered trademark of Atomix Productions.
! Serato DJ Intro, Scratch Live, ITCH and Serato DJ are registered
trademarks of Serato Audio Research Ltd., registered in the U.S. and
other countries.
The names of companies and products mentioned herein are the trademarks of their respective owners.
This product has been licensed for nonprofit use. This product has not
been licensed for commercial purposes (for profit-making use), such
as broadcasting (terrestrial, satellite, cable or other types of broadcasting), streaming on the Internet, Intranet (a corporate network) or other
types of networks or distributing of electronic information (online digital music distribution service). You need to acquire the corresponding
licenses for such uses. For details, see http://www.mp3licensing.com.
20
En
Cautions on copyrights
Recordings you have made are for your personal enjoyment and according to copyright laws may not be used without the consent of the copyright holder.
! Music recorded from CDs, etc., is protected by the copyright laws of
individual countries and by international treaties. It is the full responsibility of the person who has recorded the music to ensure that it is
used legally.
! When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.
— The specifications and appearance of this unit and each software are
subject to change for improvement without notice.
© 2014 PIONEER CORPORATION. All rights reserved.
<DRI1248-B>
">