Vixen Horns VXF1UM14CPRO 12V 1/4″ NPT SUSPENSION MANIFOLD Owner's Manual
Vixen Air VXF1UM14CPRO is a 1/4" NPT direct action manifold valve designed for air spring suspension systems. It features an inlet (IN), exhaust (EXH) port, and an additional air spring connection (1). Proper installation requires disconnecting the vehicle's negative battery cable and ensuring the air system is depressurized. A flow control valve (not included) may be needed to prevent rapid vehicle drops or rises. The valve's wiring includes yellow (ground) and red (positive) connections.
Advertisement
Advertisement
Advertisement
Key features
- 1/4" NPT fittings
- Direct action manifold valve
- Air spring control
- Inlet/Exhaust ports
- Simple wiring
Frequently asked questions
Connect the air supply hose from the air tank to the IN (Inlet) port using a 1/4" NPT male fitting (per the viewed document).
The EXH (Exhaust) port is for dumping air from the air spring (as per the viewed document).
Use a hose cutter, razor blade, or sharp knife for a clean, square cut to prevent leaks. Do not use wire cutters or scissors (per the viewed document).
Connect the yellow wire to ground, either the chassis (unpainted surface) or the negative side of the vehicle's battery (per the viewed document).
Install a flow control valve (not provided) to reduce the air intake or exhaust of the air spring (per the viewed document).