g3r

g3r
Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with High
Dielectric Strength Requirements
• High-speed models with optimum input ratings for a variety of
sensors are available.
• Input Modules and Output Modules that have the same footprint as the G2R.
• Using a coupler approved by VDE 0884 and assuring an I/O
dielectric strength of 4 kV.
• Incorporating an easy-to-see monitoring indicator.
• Approved by UL, CSA, and TÜV.
• Can be used with P2RF-05E socket for use on 35 mm DIN
track.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)
■ Input Module
Isolation
Indicator
Response speed
Logic level
Supply voltage
Photocoupler
Yes
—
4 to 32 VDC
Supply current
0.1 to 100 mA
Rated input
voltage
Model
100 to 240 VAC
G3R-IAZR1SN
High-speed
(1 kHz)
5 VDC
G3R-IDZR1SN
Low-speed
(10 Hz)
5 VDC
12 to 24 VDC
G3R-IDZR1SN-1
12 to 24 VDC
■ Output Module
Isolation
Phototriac
Indicator
Yes
Zero cross
function
Yes
Applicable output
load
2 A at 75 to 264 VAC
No
Photocoupler
—
Solid State Relay
G3R-I/O
5 to 24 VDC
Model
G3R-OA202SZN
G3R-OA202SLN
2 A at 4 to 60 VDC
G3R-ODX02SN
1.5 A at 40 to 200 VDC
G3R-OD201SN
Note: When ordering a TÜV approved model, add “-UTU” to the model number as shown below:
Example: G3R-OA202SZN-UTU.
1
Rated input
■ I/O Indication
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Mark indication
Specification
AC IN
Input module, AC input
DC IN
Input module, DC input
AC OUT
Output module, AC output
DC OUT
Output module, DC output
Mark attached to the top of the product
Specifications
■ Ratings
Input Module
Input
Model
Rated voltage
Operating voltage
Input current
Must operate
voltage
Must release
voltage
G3R-IAZR1SN
100 to 240 VAC
60 to 264 VAC
15 mA max.
60 VAC max.
20 VAC min.
G3R-IDZR1SN
5 VDC
4 to 6 VDC
8 mA max.
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
5 VDC
4 to 6 VDC
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
G3R-IDZR1SN-1
Output
Model
G3R-IAZR1SN
Logic level supply voltage
4 to 32 VDC
Logic level supply current
0.1 to 100 mA
G3R-IDZR1SN
G3R-IDZR1SN-1
Solid State Relay
G3R-I/O
2
Output Module
Input
Model
G3R-OA202SZN
Rated voltage
5 to 24 VDC
Operating voltage
4 to 32 VDC
Input current
G3R-OA202SLN
15 mA max.
(at 25°C)
G3R-ODX02SN
8 mA max.
Must operate
voltage
4 VDC max.
Must release
voltage
1 VDC min.
G3R-OD201SN
Output
Model
G3R-OA202SZN
Load voltage
75 to 264 VAC
Load current (see note)
Inrush current
0.05 to 2 A
30 A (60 Hz, 1 cycle)
G3R-OA202SLN
G3R-ODX02SN
4 to 60 VDC
0.01 to 2 A
8 A (10 ms)
G3R-OD201SN
40 to 200 VDC
0.01 to 1.5 A
8 A (10 ms)
Note: The minimum current value is measured at 10°C min.
Characteristics
■ Input Module
Item
Operate time
Release time
Response frequency
G3R-IAZR1SN
20 ms max.
20 ms max.
10 Hz
Output ON voltage drop
Leakage current
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
1.6 V max.
5 µA max.
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
10 to 55 Hz, 1.5-mm double amplitude
Ambient temperature
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Operating: 45% to 85%
Approx. 18 g
Approved standards
Ambient humidity
Weight
3
Solid State Relay G3R-I/O
G3R-IDZR1SN
0.1 ms max.
0.1 ms max.
1 kHz
1,000 m/s2 {approx. 100G}
G3R-IDZR1SN-1
15 ms max.
15 ms max.
10 Hz
■ Output Module
Item
Operate time
Release time
Response frequency
Output ON voltage drop
G3R-OA202SZN
G3R-OA202SLN
1/2 of load power source cycle + 1 ms max.
1/2 of load power source cycle + 1 ms max.
20 Hz
1.6 V max.
Leakage current
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
1.5 mA max.
1 mA max.
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
10 to 55 Hz, 1.5-mm double amplitude
Ambient temperature
Approved standards
Ambient humidity
Weight
G3R-ODX025N
1 ms max.
2 ms max.
100 kHz
G3R-OA201SN
2.5 V max.
1,000 m/s2 {approx. 100G}
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Operating: 45% to 85%
Approx. 18 g
Engineering Data
Load Current vs. Ambient Temperature
Characteristics
1.5
1.4
4-point mounting (see note 1)
2
16-point mounting (see note 2)
Single-point
mounting
1
0.7
0.5
--30 --20
0
20 30 40 55 60
80
Load current (A)
Load current (A)
2
G3R-ODX02SN (4 to 60 VDC)
1.5
1.4
4-point mounting (see note 1)
2
16-point mounting (see note 2)
Single-point
mounting
1
0.5
--30 --20
100
G3R-OD201SN (40 to 200 VAC)
0
20
40 55 60
80
Load current (A)
G3R-OA202SZN/OA202SLN
1.5
1.1
1
0.6
0.5
Single-point
mounting
16-point
mounting
(see note 2)
--30 --20
100
Ambient temperature (°C)
Ambient temperature (°C)
4-point mounting (see note 1)
0
20
40 55 60
80
100
Ambient temperature (°C)
Note: 1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
G3R-ODX02SN
Inrush current (A)
Inrush current (A)
30
20
10
G3R-OD201SN
10
10
9
9
8
8
Inrush current (A)
G3R-OA202SZN/OA202SLN
7
6
5
4
3
2
10
30 50 100 200 500 1000
Energizing time (ms)
5000
6
5
4
3
2
1
1
0
10
7
30 50
100
300 500 1000 2000
Energizing time (ms)
0
10
30 50
100
300 500 1000 2000
Energizing time (ms)
Solid State Relay
G3R-I/O
4
Operation
■ Precaution of Mounting Output Modules
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
G3R
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
G3R
G3R
Dimensions
Unit: mm (inch)
■ G3R
Terminal arrangement/
Internal connections
(Bottom view)
1
5.2
3
0.5
29 max.
1
5
28 max.
(--)
17.4
4.75
13 max.
(+)
4
9.6
7.5
3
4
Load
5
4.7
Input
0.5 4.75
4
10
1
5
(--)
(+)
2
20
■ Connecting Sockets
P2RF-05-E
G3RZ Relay
M3.5 screw
59 max.
48 max.
PFRF-05-E
Socket
3.2-dia. hole
3.5-dia.
hole
62.5 **
(66.5)***
85.5 max.
M3 or 3.5-dia. hole
61 max.
5
Solid State Relay G3R-I/O
** Indicates a value when using the PFP-❏N
Supporting Rail with the P2RF-05-E
The value is 71.5 when using the PFP-❏N2.
*** Indicates a value when using the PFP-❏N
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the PFP-❏N2.
P2R-057P
14 max.
Five, 1.6-dia. hole
G3RZ Relay
32 max.
P2R-057P Socket
41 max.
■ Socket Mounting Plate
Use the Socket Mounting Plate when arranging several Sockets in a row.
R2.25
10 ellipses
Square hole
G70A I/O Block Base
■ Ordering Information
Classification
Output
Input
Internal I/O circuit common
Rated voltage
Model
NPN (+ common)
24 VDC
G70A-ZOC16-3
PNP (- common)
24 VDC
G70A-ZOC16-4
NPN/PNP
110 VDC max., 240 VAC max.
(see note)
G70A-ZIM16-5
Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
Solid State Relay
G3R-I/O
6
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G70A-ZOC16 (Output)
234
64
+0.2
35.3 --0
75
28.6
M3.5
9.2 19.6
20.7
34.2
48.7
G70A-ZIM16 (Input)
234
48.7
10.2
+0.2
35.3 --0
75
M3.5
9.2 19.6
20.7
34.2
54
7
Solid State Relay G3R-I/O
Installation
■ Terminal Arrangement/Internal Connection
G70A-ZOC16-3 (NPN)
-+
-+
Connector Terminal
Arrangement
(Top View)
G70A-ZOC16-4 (PNP)
-+
-+
Connector Terminal
Arrangement
(Top View)
Solid State Relay
G3R-I/O
8
G70A-ZIM16-5 (NPN/PNP)
1A1
-+
-+
COM.
2A1
1A2
3A1
2A2
4A1
3A2
5A1
4A2
6A1
5A2
7A1
6A2
8A1
7A2
9A1
8A2
10A1
9A2
11A1
10A2
12A1
11A2
13A1
12A2
14A1
13A2
15A1
14A2
16A1
15A2
Connector Terminal
Arrangement
(Top View)
■ Approvals
UL (File No. E64562)/CSA (File No. LR35535)
Model G3RIAZR1SN
Module type
Input
Rating
100 to 240 VAC
IDZR1SN
Input
5 VDC, 12 to 24 VDC
IDZR1SN-1
Input
5 VDC, 12 to 24 VDC
OA202SZN
Output
5 to 24 VDC
OA202SLN
Output
5 to 24 VDC
ODX02SN
Output
5 to 24 VDC
OD201SN
Output
5 to 24 VDC
Model G3RIAZR1SN
Module type
Input
Output rating
32 VDC, 100 mA (General Purpose)
IDZR1SN
Input
32 VDC, 100 mA (General Purpose)
IDZR1SN-1
Input
32 VDC, 100 mA (General Purpose)
OA202SZN
Output
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
264 VAC, 1 A FLA, 6 A LRA
OA202SLN
Output
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
264 VAC, 1 A FLA, 6 A LRA
ODX02SN
Output
60 VDC, 2 A (General Purpose)
OD201SN
Output
200 VDC, 1.5 A (General Purpose)
60 VDC, 1 A (Tungsten)
200 VDC, 0.75 A (Tungsten)
9
Solid State Relay G3R-I/O
16A2
Precautions
See General Information section near back of this catalog for solid state precautions.
■ Connection
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
■ Protective element
Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component
when using the SSR under an inductive load.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, divide by 25.4
OMRON ELECTRONICS LLC
OMRON CANADA, INC.
OMRON ON-LINE
One Commerce Drive
Schaumburg, IL 60173
885 Milner Avenue
Toronto, Ontario M1B 5V8
847-882-2288
416-286-6465
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.ca
Cat. No. GC RLY8
5/03
Specifications subject to change without notice
Solid State Relay
Printed in USA
G3R-I/O
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement