Sway Brace Multi-Fastener Adapter

Sway Brace Multi-Fastener Adapter
Seismic Bracing
Component of State of
California OSHPD Approved
Seismic Restraints System
Fig. 906 - Sway Brace Multi-Fastener Adapter
Size Range: Use with 1" (25.4mm) and 11⁄4" (31.7mm)
UL listed Fig. 900 Series Earthquake Brace Attachments.
Material: Steel
Application: Allows sway brace fittings to develop greater
load carrying ability by providing multiple fastener
attachments. The National Fire Protection (NFPA) provides
information on fastener loads to various structures.
Refer to NFPA 13 (2010) 9.3.5.9.1.
H1
B
Seismic Bracing
Approvals: Underwriters Laboratories Listed in the USA
(UL) and Canada (cUL) only when used with TOLCO
Fig. 900 Series Earthquake Brace Attachments. Included in
our Seismic Restraints Catalog approved by the State of
California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and
placement information relating to OSHPD projects, please
refer to the TOLCO Seismic Restraint Systems Guidelines.
H1
D
H2
C
A
Installation Instructions: Fig. 906 is a multiple fastener
structural attachment component of a longitudinal or lateral
sway brace assembly. It is intended to be combined with a
TOLCO transitional attachment, "bracing pipe" and a
TOLCO "braced pipe" attachment to form a complete
bracing assembly. NFPA 13 and/or OSHPD guidelines
should be followed.
Mounting Hardware
Is Not Included
C
To Install: Attach the Fig. 906 to the structural surface as
per fastener design guidelines. Attach other TOLCO
transitional attachment fitting Fig. 909, 910, 980 or 986.
Transitional fitting attachment can pivot for adjustment to
proper brace angle.
Finish: Plain. Contact B-Line for alternative finishes and
materials.
Order By: Figure number and specify dimensions H1 and
H2.
Part
Number
in.
A
(mm)
in.
B
(mm)
in.
C
(mm)
in.
D
(mm)
H1
906
12”
(305.0)
9”
(228.6)
2”
(50.8)
1/4”
(6.3)
Specify
H2
Specify
Approx. Wt./100
Lbs.
(kg)
307
(139.3)
Eaton’s B-Line Business seismic bracing components are designed to be compatible only with other B-Line bracing components,
resulting in a listed seismic bracing assembly. B-Line’s warranty for seismic bracing components will be the warranty provided in
B-Line’s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from
B-Line’s warranty, Eaton’s B-line Business makes no warranty relating to B-Line’s seismic bracing components that are combined
with products not provided by Eaton’s B-Line Business.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
177
Pipe Hangers & Supports
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement