SECTION 1 – MACHINES – MIG - WELDMAX 2

SECTION 1 – MACHINES – MIG - WELDMAX 2
SECTION 1 – MACHINES – MIG - WELDMAX
MIG
WELDMAC 255 & 255S
240v SINGLE
PHASE
PART NUMBER: WMCT255
The Weldmac 255 & 255S are a single
phase (multi voltage) power source
suited to medium level workshops.
Ideally, these machines are
suitable for light-medium fabrication &
maintenance applications.
FEATURES
• Geared Drive & Pressure Rollers
• 14 Voltage Settings
• Euro Torch Connection
• 8m Interconnecting Leads On SWF
Models
• Overtemp Protection
• Reverse Polarity For Gas or Gasless
Wire
• Trigger Catch, Spot & Stitch Control
• Fan Cooled
• 5 Year Transformer & Choke Warranty
• 2 Year PCB & Rectifier Warranty
• 1 Year Warranty On Most Other
Components
HEAVY
INDUSTRIAL
DC
GAS or
GASLESS
SPECIFICATIONS
PART NUMBER: WMCT255S
WELDMAC 270 & 270S
255amp
MIG
Duty Cycle Rating
(EN 60974-4)
• 250amp @ 30%
• 175amp @ 60%
• 135amp @ 100%
Tested Over 4 Hour Cycle
Wire Sizes:
Hard Wire
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
Soft Wire
0.9 / 1.0mm U
1.0 / 1.2mm U
1.2 / 1.6mm U
Cored Wire
0.9 / 1.0mm Knurled
1.2 / 1.6mm Knurled
Dimensions
Compact
63kg 830l x 410w x 830h
SWF Model 76kg 810l x 410w x 620h
240v SINGLE
270amp
PHASE
PART NUMBER: WMC270
PART NUMBER: WMC270S
The Weldmac 270 & 270S single phase
machines fit into the professional and
industrial sector.
These mig welders are especially sought
after models suitable for light to heavy
fabrication, farm work and construction
sites where optimum performance is
essential on 240v supply.
GAS or
GASLESS
SPECIFICATIONS
Duty Cycle Rating
(EN60974-1)
• 210amp @ 70%
• 170amp @ 100%
Tested Over 4 Hour Cycle
Wire Sizes:
Hard Wire
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
Soft Wire
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire
0.9 / 1.0mm Knurled
1.2 / 1.6mm Knurled
Dimensions
Compact
113kg 985l x 390w x 745h
Excluding wheels
SWF2
136kg
2
FEATURES
• Geared Drive & Pressure Rollers
• 30-290amps Welding Range
• 21 Voltage Settings
• 10m Interconnecting Leads on SWF2
Models
• 25% Bigger Transformer than most
other conventional mig welders
• Copper Wound Transformers
• Overtemp Protection
• Reverse Polarity For Gas or Gasless
Wire
• Trigger Latch, Switch & Spot Control
• Fan Cooled
• 5 Year Transformer & Choke Warranty
• 2 Year PCB & Rectifier Warranty
• 1 Year Warranty On Most Other
Components
DC
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
WELD
PTY LTD
MIG
240v SINGLE
290amp
PHASE
PART NUMBER: WMC290
GAS or
GASLESS
SPECIFICATIONS
PART NUMBER: WMC290S
The Weldmac 290 & 290S mig machines
are the largest and most power effective
in their range.
Boasting 290amp output from a 240v,
primary supply, enables large tasks
to be accomplished in remote
areas or where three phase power is
unaccessable.
FEATURES
• Geared Drive & Pressure Rollers
• 30-320amps Welding Range
• 21 Voltage Settings
• Euro Torch Connection
• 10m Interconnecting Leads on SWF2
Models
• 25% Bigger Transformer than most
other conventional mig welders
• Copper Wound Transformers
• Overtemp Protection
• Reverse Polarity For Gas or Gasless
Wire
• Trigger Latch, Switch & Spot Control
• Fan Cooled
• 5 Year Transformer & Choke Warranty
• 2 Year PCB & Rectifier Warranty
• 1 Year Warranty On Most Other
Components
MIG
WELDMAC 335 & 335S
DC
Duty Cycle Rating
(EN60974-1)
• 260amp @ 70%
• 210amp @ 100%
Tested Over 4 Hour Cycle
Wire Sizes:
Hard Wire
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
Soft Wire
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire
0.9 / 1.0mm Knurled
1.2 / 1.6mm Knurled
Dimensions
Compact
116kg 985l x 390w x 745h
Excluding wheels
SWF2
139kg
415v THREE
PHASE
PART NUMBER: WMCT335
PART NUMBER: WMCT335S
The Weldmac 335 & 335S are designed
& built to cater for heavier fabrication
and maintenance applications where
performance and finish is a priority.
These machines offer exceptional
welding characteristics, on a wide range
of materials.
FEATURES
• Geared Drive & Pressure Rollers
• 20 Voltage Settings
• Euro Torch Connection
• 8m Interconnecting Leads On SWF
Models
• Overtemp Protection
• Reverse Polarity For Gas or Gasless
Wire
• Fan Cooled
• 5 Year Transformer & Choke Warranty
• 2 Year PCB & Rectifier Warranty
• 1 Year Warranty On Most Other
Components
335amp
DC
SECTION 1 – MACHINES – MIG - WELDMAX
HEAVY
INDUSTRIAL
WELDMAC 290 & 290S
GAS or
GASLESS
SPECIFICATIONS
Duty Cycle Rating
(EN60974-1)
• 335amp @ 30%
• 250amp @ 60%
• 190amp @ 100%
Tested Over 4 Hour Cycle
Wire Sizes:
Hard Wire
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
Soft Wire
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire
0.9 / 1.0mm Knurled
1.2 / 1.6mm Knurled
Dimensions
Compact
77kg 830l x 410w x 890h
SWF Model 87kg 810l x 410w x 620h
3
WELD
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
E l [email protected]
SECTION 1 – MACHINES – MIG - WELDMAX
HEAVY
INDUSTRIAL
WELDMAC 350 & 350S
MIG
PART NUMBER: WMC350
The Weldmac 350 & 350S mig
welding machines offer excellent arc
characteristics & unsurpassed value.
They are perfect for all materials and can
perform difficult tasks with ease. The
350 range is the answer for those who
require smooth, low spatter welding
on all tasks from sheetmetal to heavy
fabrications.
FEATURES
• Geared Drive & Pressure Rollers
• 30-380amps Welding Range
• 30 Voltage Settings
• Euro Torch Connection
• 10m Interconnecting Leads on SWF2
Models
• 25% Bigger Transformer than most
other conventional mig welders
• Copper Wound Transformers
• Overtemp Protection
• Reverse Polarity For Gas or Gasless
Wire
• Trigger Latch, Switch & Spot Control
• Fan Cooled
• 5 Year Transformer & Choke Warranty
• 2 Year PCB & Rectifier Warranty
• 1 Year Warranty On Most Other
Components
HEAVY
INDUSTRIAL
DC
GAS or
GASLESS
SPECIFICATIONS
PART NUMBER: WMC350S
WELDMAC 395 & 395S
415v THREE
350amp
PHASE
MIG
PART NUMBER: WMC395
PART NUMBER: WMC395S
The Weldmac 395 & 395S are designed
for professionals who expect superior
performance from their welding
equipment. The 395 range provides
consistent welding with clean and
crisp characteristics on a wide range of
materials, including mild steel, stainless
steel & aluminium.
415v THREE
395amp
PHASE
DC
GAS or
GASLESS
SPECIFICATIONS
Duty Cycle Rating
(EN60974-1)
• 355amp @ 70%
• 300amp @ 100%
Tested Over 4 Hour Cycle
Wire Sizes:
Hard Wire
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
1.2 / 1.6mm V
Soft Wire
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire
0.9 / 1.0mm Knurled
1.2 / 1.6mm Knurled
Dimensions
Compact
144kg 985l x 450w x 745h
Excluding wheels
SWF2
168kg
4
FEATURES
• Geared Drive & Pressure Rollers
• 30-410amps Welding Range
• 30 Voltage Settings
• Euro Torch Connection
• 10m Interconnecting Leads on SWF2
Models
• 25% Bigger Transformer than most
other conventional mig welders
• Copper Wound Transformers
• Overtemp Protection
• Reverse Polarity For Gas or Gasless
Wire
• Fan Cooled
• Trigger Latch, Switch & Spot Control
• 5 Year Transformer & Choke Warranty
• 2 Year PCB & Rectifier Warranty
• 1 Year Warranty On Most Other
Components
Duty Cycle Rating
(EN60974-1)
• 335amp @ 60%
• 260amp @ 100%
Tested Over 4 Hour Cycle
Wire Sizes:
Hard Wire
0.6 / 0.8mm V
0.9 / 1.0mm V
1.2 / 1.6mm V
Soft Wire
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire
0.9 / 1.0mm Knurled
1.2 / 1.6mm Knurled
Dimensions
Compact
140kg 985l x 450w x 745h
Excluding wheels
SWF2
164kg
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
WELD
PTY LTD
MIG
PART NUMBER: WMC440S
415v THREE
440amp
PHASE
DC
GAS or
GASLESS
SPECIFICATIONS
The Weldmac 440S is a professional
quality, high performance mig welder
suited to heavy industrial/fabrication
workshops needing high endurance and
output. It offers a heavy duty 4WD wire
feed system coupled to outstanding arc
quality.
FEATURES
• 4x Geared Drive & Pressure Rollers
• 30-450amps Welding Range
• 30 Voltage Settings
• Euro Torch Connection
• 10m Interconnecting Leads on SWF2
Models
• 25% Bigger Transformer than most
other conventional mig welders
• Copper Wound Transformers
• Overtemp Protection
• Reverse Polarity For Gas or Gasless
Wire
• Fan Cooled
• Trigger Latch, Switch & Spot Control
• 5 Year Transformer & Choke Warranty
• 2 Year PCB & Rectifier Warranty
• 1 Year Warranty On Most Other
Components
Duty Cycle Rating
(EN60974-1)
• 400amp @ 50%
• 280amp @ 100%
Tested Over 4 Hour Cycle
Wire Sizes:
Hard Wire
0.6 / 0.8mm V
0.9 / 1.0mm V
1.0 / 1.2mm V
1.2 / 1.6mm V
Soft Wire
0.9 / 1.0mm U
1.2 / 1.6mm U
Cored Wire
0.9 / 1.0mm Knurled
1.2 / 1.6mm Knurled
Dimensions
Compact
160kg 985l x 450w x 660h
SWF2
182kg
The Weldmac Drive System
SECTION 1 – MACHINES – MIG - WELDMAX
HEAVY
INDUSTRIAL
WELDMAC 440S
The secret to years of TROUBLE FREE wire feeding!
POSITIVE
GEAR DRIVEN
DRIVE SYSTEM
HEAVY DUTY
DRIVE MOTOR
LARGE 40mm
DIAMETER ROLLERS
HEAVY
ALL METAL
MOUNTING BRACKET
LARGE DIAMETER
ADJUSTABLE
PRESSURE ARM
Heavy Duty Transformer
and Cooling System
WELDMAC 250 TRANSFORMER PICTURED
At the heart of every WELDMAC model is a superior quality copper
wound transformer featuring a unique “DEEP CYCLE” fin system
for excellent cooling and high duty cycles. Together with high flow
fan cooling, this combination gives you everything you need... the
highest quality welding operation... day after day!
Fast Finance
Lease – Rent/Buy options
5
WELD
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
E l [email protected]
SECTION 1 – MACHINES – PULSE MIG - FRONIUS
FRONIUS TRANSPULSE SYNERGIC 2700
MIG
TIG
ARC
TPS2700 4.075.095.0638
The Fronius TPS2700 is the answer when
welding aluminium, steel, stainless and
CrNi for those who build boats, trailers,
tanks or in the field. The TPS2700 is light
weight and can be used either manually
or can be coupled to robotic systems for
maximum productivity and performance.
FEATURES
< Integrated 4 wheel drive wire feeder
< Portable
< Outstanding precision
< Digital welding-process control
< Superb welding properties
< MIG brazing of galvanised sheets
< Start-up program for aluminium
< MIG pulsed-arc
< Synergic programs
< TIG and Electrode welding
< Serial interface for data transmission
< Easy operation
< Digital display for amps, volts,
material thickness, wire feed speed,
inductance arc length, etc
< Remote controllable
< User defined function key
< Continuous power adjustment is
possible directly from torch with up /
down mode
< Simple to calibrate
< Job / memory mode
< Thermostatic fan
< Push / pull and multi-lock compatible
< Double pulse option available
415v THREE
PHASE
270amp
DC
GAS
SPECIFICATION
Duty Cycle Rating
(EN60974-1)
< 270 Amps @ 40%
< 210 Amps @ 60% 10min/40˚C
< 170 Amps @ 100%
Wire Sizes:
Hard Wire
0.8mm
0.9mm
1.0mm
1.2mm
Soft Wire
0.9mm
1.0mm
1.2mm
1.6mm
Cored Wire
1.2mm
1.6mm
Dimensions
625 x 290 x 480 mm
Weight
TPS2700
27.5kg
Fast Finance
Lease – Rent/Buy options
FRONIUS TRANSPULSE SYNERGIC 3200 / 4000 / 5000
4.075.124
4.075.100.638 Gas or
Water Cooled
TPS5000
4.075.102.638
The Fronius TPS3200/4000/5000 are
ideally suited for welding structural
steel, shipyards, offshore, apparatus
construction, mechanical engineering,
tank manufacturing and aluminium ship
building.
SPECIFICATION
Duty Cycle Rating
TPS3200
< 320 Amps @ 40%
< 260 Amps @ 60%
< 220 Amps @ 100%
TPS4000
< 400 Amps @ 50%
< 365 Amps @ 60%
< 320 Amps @ 100%
TPS5000
< 500 Amps @ 40%
< 450 Amps @ 60%
< 340 Amps @ 100%
(EN60974-1)
10min/40˚C
10min/40˚C
10min/40˚C
6
TPS3200
TPS4000
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
WELD
PTY LTD
PN: 4.075.140.930
The T.I.M.E. 5000 is a continuously
adjustable GMA machine suitable for
structural steel, shipyards, offshore,
apparatus construction, mechanical
engineering, tank manufacturing and
aluminium ship building.
FEATURES
• High deposition MIG Process
(T.I.M.E.) Carbon steels only
• Digital welding-process control
• 4 roller drive
• Modular extensions
• Serial interface for data transmission
• MIG brazing of galvanised sheets
• Synergic programs
• TIG lift arc ignition
• Digital display for welding amperage,
welding voltage, thickness of material,
wire feed speed
• Remote-controllable
• Push pull torch or push torch
• Continuous power-adjustment
possible directly from torch, with Up/
Down mode
• Job mode
• Key lock optional
• MIG Pulsed-arc
• S mark, CE mark, C Tick
• Optional Multi-lock torch body
exchanging system
• Earth leakage monitoring
SPECIFICATION
Duty Cycle Rating
(EN60974-1)
• 400 Amps @ 100%
• 500 Amps @ 75% 10min/40˚C
Wire Sizes:
Hard Wire
0.8mm
0.9mm
1.0mm
1.2mm
1.6mm
Soft Wire
0.9mm
1.0mm
1.2mm
1.6mm
Cored Wire
1.2mm
1.6mm
Dimensions
625 x 290 x 480 mm
Weight
36kg
a
Ask foration
r
t
s
demonday!
to
SECTION 1 – MACHINES – PULSE MIG - FRONIUS
T.I.M.E. 5000
ROLLER SELECTION GUIDE
Drive Rollers for MIG/MAG Wire feeders
Part-number
Description
42.0001.1584
42.0001.3275
V Groove 0.8mm Gear Driven TS / TPS / V Syn
V Groove 0.9mm Gear Driven TS / TPS / V Syn
42.0001.1585
42.0001.1361
42.0001.1362
42.0001.1612
42.0001.1613
42.0001.0385
42.0001.0386
42.0001.0404
42.0001.0352
42.0001.0353
42.0001.0354
42.0001.0433
42.0001.0402
42.0001.1732
V Groove 1.0mm Gear Driven TS / TPS / V Syn
V Groove 1.2mm Gear Driven TS / TPS / V Syn
V Groove 1.6mm Gear Driven TS / TPS / V Syn
U Groove 0.8mm Gear Driven TS / TPS / V Syn
U Groove 1.0mm Gear Driven TS / TPS / V Syn
U Groove 1.2mm Gear Driven TS / TPS / V Syn
U Groove 1.6mm Gear Driven TS / TPS / V Syn
Knurled 1.2mm Gear Driven TS / TPS / V Syn
Knurled 1.6mm Gear Driven TS / TPS / V Syn
Knurled 2.0mm Gear Driven TS / TPS / V Syn
Knurled 2.4mm Gear Driven TS / TPS / V Syn
Knurled 2.8mm Gear Driven TS / TPS / V Syn
Knurled 3.8mm Gear Driven TS / TPS / V Syn
Plain Pressure Roller
7
WELD
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
E l [email protected]
SECTION 1 – MACHINES – PULSE MIG - CEBORA
MIG
240v
200amp
CEBORA PULSE MIG 2035/M & 2035/MD “DOUBLE PULSE”
PN: 285
Portable yet powerful 240V pulse MIG
welder. This machine uses the latest
technology and is a market leader
in portable pulse MIG welding. It is
designed to weld the latest high strength
steels and alloys used in the automotive
repair industry, including MIG brazing.
FEATURES
• Inverter technology
• 15-205 Amp welding range
• Euro torch connection
• 5kg Spool internal
• 15kg Spool using spool kit
• Fan cooled
• Thermal overload protection
• Pre and post gas control
• Step less voltage adjustment
• Pulse, synergic & standard MIG
modes
• Upgradeable software
• Quality geared drive roll system
• Soft start features
• Crater fill
MIG
415v
•
•
•
•
•
PULSE
SYNERGIC
Upslope
Digital meters
Push/pull compatible
Remote control compatible
2 Year warranty
SPECIFICATION
Duty Cycle Rating
(EN60974-1)
200 Amps @ 35%
160 Amps @ 60% 10min/40˚C
145 Amps @ 100%
Wire Sizes
Roller Type
Hard Wire
0.6mm V
0.8mm V
0.9mm V
Soft Wire
0.9mm U
1.0mm U
1.2mm U
Cored Wire
0.9mm Knurled
1.2mm Knurled
Dimensions (no spool adaptor)
458 x 260x 471
Weight
20kg
380AMP 500AMP
DC
PULSE SYNERGIC
CEBORA PULSE MIG 3840/T & 5040/TD “DOUBLE PULSE”
PN: 287
SPECIFICATIONS
The Cebora 3840/T pulse MIG welding
unit is a 3 Phase power source coupled
to a 4 roll drive wire feeder and a water
cooler unit. Enabling perfect results, from
ultra-thin aluminium to heavy steel or
stainless, this unit will out perform most
others with ease.
SPECIFICATION
PN: 289
The Cebora 5040/TD is a 3 Phase
inverter, power source with pulse &
double pulse operation, for professional
use wherever excellent quality welding is
required, together with high productivity.
It also is a multi-process power source,
able to weld in MIG-MAG, TIG mode
(Lift-arc) and MMA (Stick) mode.
Duty Cycle Rating
(EN60974-1)
500 Amps @ 40%
450 Amps @ 60% 10min/40˚C
430 Amps @ 100%
FEATURES
• 5-380 Amps welding range
• Stepless electronic voltage control
• 10 Metre interconnecting cables
• 4 Roll drive system
• Built-in synergic programs
• Thermal overload protection
• Fan cooled
• Soft-start adjustment
• Euro torch connection
• Enclosed spool holder
• Water cooler unit fitted
• Water cooled torch fitted
• Wheel kit fitted
• 2 Year warranty
• Gas bottle carrier
• Push/pull torch compatible
• Multi-process power source inc MIG,
TIG & stick
• Digital display
• Light weight
Wire Sizes
Roller Type
Hard Wire
0.6mm V
0.8mm V
0.9mm V
1.0mm V
1.2mm V
Soft Wire
0.9mm U
1.0mm U
1.2mm U
1.6mm U
Cored Wire
0.9mm Knurled
1.0mm Knurled
1.2mm Knurled
1.6mm Knurled
Dimensions
1060 x 705 x 1380
Weight
99kg
8
Italian r
invertey
qualit
Duty Cycle Rating
(EN60974-1)
380 Amps @ 40%
340 Amps @ 60% 10min/40˚C
310 Amps @ 100%
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
WELD
PTY LTD
PN: 581
415v
380AMP
DC
SYNERGIC
SPECIFICATION
The Cebora 3840/T is a 380 Amp
synergic MIG welder. This unit is ideally
suited to automotive repair, small
fabrication workshops using mild steel,
stainless steel or aluminium.
FEATURES
• Built-in synergic programs
• Post gas timer
• Soft-start adjustments
• Uses 5-15kg spools
• Gas or gasless wire compatible
• Euro torch connection
• 10 Mtr interconnecting leads on SWF
models
• Thermal overload protection
• Fan cooled
• Suitable for 3 or 4 metre torches
• Gas bottle carrier
• Wheel kit fitted
• 2 Year warranty
• Push/pull torch compatible
• 4 Roll drive on SWF models
• Enclosed spool holder
MIG
Duty Cycle Rating
(EN60974-1)
330 Amps @ 40%
270 Amps @ 60% 10min/40˚C
210 Amps @ 100%
Wire Sizes
Roller Type
Hard Wire
0.6mm V
0.8mm V
0.9mm V
1.0mm V
1.2mm V
Soft Wire
0.9mm U
1.0mm U
1.2mm U
Cored Wire
0.9mm Knurled
1.0mm Knurled
1.2mm Knurled
Dimensions
Compact
915 x 542 x 795
SWF Model 975 x 615 x 900 PS only
Weight
Compact
90kg PS only
Weight
SWF Model 85kg PS only
415v
450AMP
DC
SYNERGIC
SECTION 1 – MACHINES – MIG - CEBORA
MIG
CEBORA SYNERGIC MIGS – 3840/T & 3840/B
CEBORA SYNERGIC MIG 4540/T & 4540/TS
PN: 597 4540/T
SPECIFICATION
PN: 615 4540/TS
The Cebora 4540/T & 4540/TS are
3 phase synergic MIG welders, that
have all the features including synergic
control. With 450 Amps of power, this
enables some of the most difficult tasks
to be accomplished, using mild steel,
stainless steel & aluminium.
MIG
Duty Cycle Rating
(EN60974-1)
400 Amps @40%
330 Amps @ 60% 10min/40˚C
260 Amps @ 100%
415v
470AMP
DC
SYNERGIC
CEBORA SYNERGIC MIG 4750/TS
SPECIFICATION
PN: 617
The Cebora 4750/TS is a 470 Amp 3
phase MIG unit built for tackling those
more demanding tasks. The 4750/TS has
a 4 roll drive system which enhances its
performance on various base materials
including mild steel, stainless steel and
aluminium.
MIG
Duty Cycle Ratings
(EN60974-1)
420 Amps @ 50%
390 Amps @ 60% 10min/40˚C
300 Amps @ 100%
415v
550AMP
DC
SYNERGIC
CEBORA SYNERGIC MIG 5550/TS
SPECIFICATION
PN: 619
Fast Finance
Lease – Rent/Buy options
The Cebora 5550/TS is designed and
built for heavy industrial applications
such as mining, earthmoving and
structural steel where more power is
required. The 5550/TS has a factory fitted
TDA4 which enables better control where
high quality welds and a perfect finish is
essential.
Duty Cycle Ratings
(EN60974-1)
500 Amps @ 50%
450 Amps @ 60% 10min/40˚C
350 Amps @ 100%
9
WELD
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
E l [email protected]
SECTION 1 – MACHINES – MIG - WIA
MIG
WIA WELDMATIC 256
PN: CP124-1
240v
255AMP
SPECIFICATIONS
FEATURES
FEA
8 Fa
Fan on Demand
8 Fi
Fine Voltage on Wire Feeder
8 Ga
Gas / Gasless
8 Du
Dual Handles
8 Lo
Low Easy Bottle Tray
8 8m int. Cable
8 4R
4RD Wire Feeder
Duty Cycle Rating
255 Amps @ 25%
100 Amps @ 100%
Shipping Weight 104kg
MIG
WIA WELDMATIC 356 & 396
PN: CP126-1
PN: C
CP125-1
SPECIFICATIONS
SPEC
SPECIFICATIONS
Duty C
Cycle Rating
355 Am
Amps @ 40%
225 Amps
Am @ 100%
Duty Cycle Rating
395 Amps @ 30%
250 Amps @ 100%
Shipping Weight 135kg
Shippin
Shipping Weight 135kg
415v
355AMP
395AMP
FEATURES
8 Fan on Demand
8 Gas / Gasless
8 Digital Meters (396 only)
8 Dual Handles
8 Low Easy Bottle Tray
8 10 Metre Int. Cables
8 4RD Wire Feeder
AUSTRALIAN MADE
MIG
WIA WELDMATIC FABRICATOR
PN: CP127-S P/SOURCE
FEATURES
8 Fan on Demand
8 Digital Meters
8 Choice of Wire Feeders
- W19
- W61
415v
400AMP
SPECIFICATIONS
Duty Cycle Rating
400 Amps @ 45%
270 Amps @ 100%
Shipping Weight 188kg
10
ING
FEATUR
ALL NEW E
FIR
CENTRE BLES
A
CONSUM
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
WELD
PTY LTD
PN: 6108150 150 / 6108180 180
FEATURES
; Lightweight & Compact
; +)+5#.651/#5+%10.9)
; Inverter Technology
; :.#5' *+%-0'44<'55+0)
; Large LCD user
240v
180AMP
SPECIFICATIONS
Duty Cycle Rating
;/24
%
;/24
;/24
;/24
Weight -g
ILITY
PORTAB !
PLUS
MIG
KEMPPI FASTMIG BASIC 300 / 400 / 500
PN: 6033000 300 6034000 400
6035000 500
FEATURES
; Inverter Technology
; Stepless Volt Control
; Volts and wire speed can be operated
on wire feeder or power source
; No circuit boards in robust wire feeder
; 4RD Wire Feeder
; Consumes 10% Less Energy
300/400/500AMP
SPECIFICATIONS
Duty Cycle Rating
300 ;
/24
400 ;/24
500 ;/24
Weight 34kg 300
35kg 400
36kg 500
2 YEAR WARRANTY
WATER COOLED AVAILABLE
INVER
T
TECHN ER
OL
WHICH OGY
SAVES
YOU P
OWER
!
MIG
KEMPPI PRO EVOLUTION PULSE MIG 320 / 420 / 520
PN: 6131320
6131520
415v
SECTION 1 – MACHINES – MIG - KEMPPI
MIG
KEMPPI MINARC MIG ADAPTIVE 150 & 180
415v
320/420/520AMP
SPECIFICATIONS
6131420
Duty Cycle Rating
;
/24
;/24
;/24
;/24
;/24
PULSE MIG
FEATURES
; 3 different panels to choose from
; Synergic
; Double Pulse
; Memory
; Digital Meters
; Water Cooling Option
The cess n
o
a
; &,645#$.'155#3525+10
hc
i Pr
o
lt
ic
Mu , wh nded t
m pa
e
t
Sys lso ex or TIG
a
be MMA ding
l
we
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
E l [email protected]
11
WELD
Fast Finance
Lease – Rent/Buy options
SECTION 1 – MACHINES – MIG - LINCOLN - MILLER
MIG
LINCOLN POWER MIG 180C
PN: K2668-1
240v
180AMP
SPECIFICATIONS
FEATURES
7 Continuous Volt Control
7 Tough PCB Protection
7 30 kgs
7 Delivers Outstanding Arc Control
7 Dual Gear Driven Guide Rollers
7 Great Results on Steel, Stainless
and Aluminium
Duty Cycle Rating
130 Amps @ 30%
3 YEAR WARRANTY
ASK
THE
ABOUT
UN
SPOOLGBLE!
AVAILA
MIILLER - DELTAWELD, DIMENSION, XMT, X-TREME WIRE FEEDER
MIG POWER SOURCED & VOLTAGE SENSING WIRE FEEDER
MIG - DELTAWELD 602 & 852
FEATURES
7 Preset Weld Voltage
7 Line Voltage Compensation
7 Digital Volt/Amp Meters
7 Fan on Demand
SPECIFICATIONS
Duty Cycle Rating
602 - 450 Amps @ 100%
852 - 650 Amps @ 100%
3 YEAR WARRANTY
s&/24(%4/5'(%34-!.5&!#452).'.%%$3,//+./&524(%2
CC/CV-XMT 350
FEATURES
7 Inverter Technology
7 Fan on Demand
7 Lift Arc For TIG
7 Multi Process
7 Digital Meters
SPECIFICATIONS
Duty Cycle Rating
72.,/1
7
,/1
3 YEAR WARRANTY
s#/..%#434/3).',%/20(!3%0/7%2
X-TREME 12VS WIRE FEEDER
FEATURES
7 Durable, Lightweight, Portable
7 Digital Meters - with Sunvision
12
E
VOLTAG
G
IN
SENS
DER
E
E
F
WIRE
GINE
FOR EN
DRIVEN
S
WELDER
T l 1300 211 200
F l (03) 5822 0055
SPECIFICATIONS
Duty Cycle Rating
7,/1
Weight 15.9kg
3 YEAR WARRANTY
ed
os
case cl
E l [email protected]
WELD
PTY LTD
MIG STICK
PN: KUMJR165
SPECIFICATIONS
MIG INVERTER WELDER
Duty Cycle Rating
160 Amps @ 35%
95 Amps @ 100%
FEATURES
• DC MMA
• Gas/Gasless MIG
• Spool Sizes 5kg
• Euro Connect MIG Torch
UNIMIG 190 MIG
PN: KUMJR190
SPECIFICATIONS
MIG INVERTER WELDER
Duty Cycle Rating
175 Amps @ 35%
103 Amps @ 100%
FEATURES
UNIMIG 250 MIG
PN: KUMJR250
SPECIFICATIONS
MIG INVERTER WELDER
Duty Cycle Rating
250 Amps @ 35%
148 Amps @ 100%
FEATURES
UNIMIG 250 MIG REMOTE WIREFEEDER PACKAGE
MIG INVERTER WELDER
Duty Cycle Rating
250 Amps @ 35%
148 Amps @ 100%
UNIMIG 350 MIG REMOTE WIREFEEDER PACKAGE
3 PHASE
MIG STICK
SPECIFICATIONS
• Remote wirefeeder
• DC MMA
• Gas/Gasless MIG
• Spool Sizes 15kg
• Euro Connect MIG Torch
MIG STICK
SPECIFICATIONS
MIG/MMA 3 PHASE INVERTER
Duty Cycle Rating
350 Amps @ 40%
221 Amps @ 100%
• Remote wirefeeder
• DC MMA
240V
250AMP
240V
250AMP
Machine package includes Argon
Regulator / 3M SB25 MIG Torch
4m Earth Lead / 4m Arc Lead /
MIG 250
PN: KUMJR350SWF
FEATURES
190AMP
Machine package includes Argon
Regulator / SB24 MIG Torch
4m Earth Lead / 4m Arc Lead /
MIG 250
PN: KUMJR250SWF
FEATURES
240V
Machine package includes Argon
Regulator / SB15 MIG Torch
4m Earth Lead / 4m Arc Lead /
MIG 175
MIG STICK
• The ultimate welder for site
PS
application
250 AM ER
OW
P
• DC MMA
W
A
R
of
0V
• Gas/Gasless MIG
from 24
L
• Spool Sizes 5kg /15kg
SING E
• Euro Connect MIG Torch
PHASE!
165AMP
Machine package includes Argon
Regulator / SB15 MIG Torch
4m Earth Lead / 4m Arc Lead /
MIG 175
MIG STICK
• The ultimate welder for site application
• DC MMA
• Gas/Gasless MIG
• Spool Sizes 5kg
• Euro Connect MIG Torch
240V
SECTION 1 – MACHINES – MIG - UNIMIG
UNIMIG 165 MIG
415V
350AMP
Machine package includes Argon
Regulator / SB36 MIG Torch
Earth Lead / Arc Lead / MIG 350 /
SWF
NOW WITH 3 YEAR WARRANTY
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
E l [email protected]
13
WELD
SECTION 1 – MACHINES – TIG - CEBORA
CEBORA POWER ROD 1565
STICK & TIG
PN: 253
STICK & TIG
STICK & TIG
15AMP,
150AMP
DC
HF
INVERTER
Duty Cycle Rating
GTAW
150Amps @ 40%
130 Amps @ 60%
120 Amps @ 100%
MMAW
140 Amps @ 30%
115 Amps @ 60%
105 Amps @ 100%
Electrode Sizes
1.6mm – 4.0mm
Tungsten Sizes
1.0mm – 3.2mm
Dimensions
390 x 172 x 340
Weight
9.5kg
240V
15AMP,
160AMP
DC
HF
PULSE
SPECIFICATION
FEATURES
• 5-160 Amp welding range
• DC anti-stick MMAW
• DC High frequency, pulse GTAW
• Stepless amperage control
• Inverter power source
• Light weight
• 35/50 Output sockets
• Generator compatible (7KVA min)
• Electronic control
• Thermal overload protection
• Robust design
• Remote control receptacles
• Built-in gas solenoid
• Up/down amperage control option
• Foot control option
• Up slope control
• Down slope control
• Crater fill feature
• Genuine Cebora trolley option
F l (03) 5822 0055
INVERTER
SPECIFICATION
PN: 272
14
240v
FEATURES
• 5-150 Amp welding
• DC anti-stick MMAW
• DC high frequency GTAW
• Stepless amperage control
• Inverter power source
• Light weight
• 35-50 Output sockets
• Suitable for contractors and sheet
metal workshops
• Generator compatible (7KVA min)
• Electronic control
• Thermal overload protection
• Robust design
• Remote control recepticles
• Built-in gas solenoid
• Up slope control
• Down slope control
• Crater fill feature
• Genuine Cebora trolley option
T l 1300 211 200
DC
Duty Cycle Ratings
150 Amps @ 35%
125 Amps @ 60%
115 Amps @ 100%
Electrodes
1.6mm – 4.0mm
Dimensions
370 x 172 x 340
Weight
7.9kg
PN: 271
CEBORA POWER TIG 1665 DC HF
15AMP,
150AMP
SPECIFICATION
FEATURES
• DC anti-stick MMAW
• DC lift-arc GTAW
• 5-150 Amp welding range
• Stepless amperage control
• Inverter power source
• Light weight
• 10/25 output sockets
• Suitable for workshops, contractors
and site work
• Generator compatible (6KVA min)
• Electronic control
• Thermal overload protection
• Robust design
CEBORA POWER TIG 1540 DC HF
240v
Duty Cycle Rating
GTAW
160 Amps @ 40%
145 Amps @ 60%
130 Amps @ 100%
MMAW
140 Amps @ 35%
125 Amps @ 60%
115 Amps @ 100%
Electrode Sizes
1.6mm – 4.0mm
Tungsten Sizes
1.0mm – 4.0mm
Dimensions
370 x 176 x 402
Weight
10.5kg
E l [email protected]
WELD
PTY LTD
15AMP,
190AMP
240V
PN: 277
CEBORA TIG SOUND AC/DC 2030/M
STICK & TIG
The
t size
m
co pac s
r
ensu e
s
effortles
!
y
t
i
l
i
mob
240V
PN: 346
15AMP,
200AMP
AC/DC
HF
PULSE
SPECIFICATION
The Cebora 2030/M TIG Sound is an
AC/DC inverter power source for use in
TIG and stick modes. The engineering
and manufacturing technology of the
machine have produced a real performer,
with a welding range from 5 Amps to 200
Amps.
FEATURES
• 5-200 Amp welding range
• AC or DC anti-stick MMAW
• AC or DC HF, pulse GTAW
• Upslope control
• Down-slope control
• Stepless amperage adjustment
• Inverter power source
• Crater fill feature
• Remote control receptacles
• Built-in gas solenoid
• Foot control option
• Up/down amperage control option
• Electronic control
• Thermal overload protection
• Generator compatible (7KVA min)
• 35-50 Output sockets
• Water cooler option available
• Robust design
• Genuine Cebora trolley option
• Arc balance control
• Pre & post gas control
F l (03) 5822 0055
Duty Cycle Rating
GTAW
200 Amps @ 30%
160 Amps @ 60%
150 Amps @ 100%
MMAW
140 Amps @ 100%
Electrode Sizes
1.6mm – 4.0mm
Tungsten Sizes
1.0mm – 4.0mm
Dimensions
437 x 207 x 411
Weight
16.5kg
E l [email protected]
15
T l 1300 211 200
PULSE
Duty Cycle Rating
GTAW
190 Amps @ 35%
160 Amps @ 60%
140 Amps @ 100%
MMAW
140 Amps @ 35%
125 Amps @ 60%
115 amps @ 100%
Electrode Sizes
1.6mm – 4.0mm
Tungsten Sizes
1.0mm – 4.0mm
Dimensions
370 x 176 x 402
Weight
11.7kg
FEATURES
• 5-190 Amp welding range
• DC anti-stick MMAW
• DC HF pulse GTAW
• Stepless amperage control
• Inverter power source
• Up slope control
• Down slope control
• Crater fill feature
• Remote control receptacles
• Built-in gas solenoid
• Robust design
• Up/down amperage control option
• Foot control option
• Electronic control
• Thermal overload protection
• 35/50 Output sockets
• Generator compatible (7KVA min)
• Genuine Cebora trolley option
PTY LTD
HF
SPECIFICATION
The Cebora power TIG 1965 DC inverter
power source has high frequency
ignition coupled to a pulse controller.
The ideal machine for stainless steel
fabrication in the food industry or light
manufacturing applications where weld
presentation and minimal clean-up is
critical.
WELD
DC
SECTION 1 – MACHINES – TIG - CEBORA
STICK & TIG
CEBORA POWER TIG 1965 DC HF
SECTION 1 – MACHINES – TIG - CEBORA
STICK & TIG
CEBORA TIG SOUND AC/DC 2643/T
PN: 351
PN: 352
FEATURES
• Synergic control
• 5-330 Amp welding range
• AC or DC MMAW
• AC or DC HF, pulse, synergic GTAW
• Upslope control
• Down slope control
• Crater fill feature
• Inverter power source
• Generator compatible
• Stepless amperage control
• Remote control receptacles
• Built-in gas solenoid
• Up/down remote amperage control
• 35/50 Output sockets
• Water cooler option
• Arc balance control
HF
PN: 353
FEATURES
• Synergic control
• 5-450 Amp welding range
• AC or DC MMAW
• AC or DC HF, pulse, synergic GTAW
• Upslope control
• Down slope control
• Crater fill feature
• Inverter power source
• Generator compatible
• Stepless amperage control
• Remote control receptacles
• Built-in gas solenoid
• Up/down remote amperage control
• 35/50 Output sockets
• Water cooler option
• Arc balance control
415V
330AMP
AC/
DC
HF
• Pre & post gas control
• Foot control option
• Mobile unit (wheels/trolley std)
SPECIFICATION
Duty Cycle Rating
GTAW
330 Amps @ 40%
320 Amps @ 60%
310 Amps @ 100%
MMAW
330 Amps @ 40%
320 Amps @ 60%
310 Amps @ 100%
Weight
STICK & TIG
CEBORA TIG SOUND AC/DC 4560/T
16
AC/
DC
Duty Cycle Rating
GTAW
260 Amps @ 40%
240 Amps @ 60%
230 Amps @ 100%
MMAW
210 Amps @ 40%
200 Amps @ 60%
190 Amps @ 100%
Electrode Sizes
1.6mm – 4.0mm
Tungsten Sizes
1.0mm – 4.0mm
Dimensions (wheels attached)
1060 x 705 x 975
Weight
65kg
STICK & TIG
CEBORA TIG SOUND AC/DC 3340/T
F l (03) 5822 0055
260AMP
SPECIFICATION
FEATURES
• Synergic control
• 5-260 Amp welding range
• AC or DC MMAW
• AC or DC HF, pulse, synergic GTAW
• Upslope control
• Down slope control
• Crater fill feature
• Inverter power source
• Generator compatible
• Stepless amperage control
• Remote control receptacles
• Built-in gas solenoid
• Up/down remote amperage control
• 35/50 Output sockets
• Water cooler option
• Arc balance control
• Pre & post gas control
• Foot control option
• Mobile unit (wheels/trolley std)
T l 1300 211 200
415V
93kg
415V
450AMP
AC/
DC
HF
• Pre & post gas control
• Foot control option
• Mobile unit (wheels/trolley std)
SPECIFICATION
Duty Cycle Rating
GTAW
450 Amps @ 60%
380 Amps @ 100%
MMAW
360 Amps @ 60%
320 Amps @ 100%
Weight
136kg
Fast Finance
Lease – Rent/Buy options
E l [email protected]
WELD
PTY LTD
DC
TIG & STICK
240V 125AMP
10AMP
FRONIUS TRANSPOCKET 1500 / 1500 VRD
DC
TIG & STICK
240V 150AMP
15AMP
PN: TP1500
PN
PN: TP1500 VRD
4
4.075.108
075 108
4.075.108.638
FEATURES
• 240v single phase
• Weighs only 4.7kg
• Sturdy, impact proof housing
• Generator compatible
• Able to weld Cellulose electrodes
• Thermostat controlled fan
• Removable steel mesh dust filter
• Ideal for typical welding job: Rod
–electrode and TIG welding with lift
arc ignition
• Suitable for construction sites and
workshops
• Remote controllable version (RC
version)
• S-mark, CE-mark and C Tick
• Controls located in protective recess
SPECIFICATION
Duty Cycle Ratings
• 140 Amps @ 35%
• 80 Amps @ 100%
Dimensions
315 x 110 x 200 mm
Weight
4.7kg
Lightwe
i
and com ght
pact
size giv
better re es
ach
240V 150AMP
15AMP
FRONIUS TRANSPOCKET 1500 TIG / 1500 VRD TIG
PN: 1500 TIG
4.075.110.630
PN: 1500 VRD TIG
4.075.110.638
FEATURES
• 240v single phase
• Gas valve in power source (1500 TIG)
• 5 Pulse TIG settings (1500 TIG)
• Amp control on TIG torch (1500 TIG)
• Able to weld Cellulose electrodes
• Thermostat controlled fan
• Removable steel mesh dust filter
• Ideal for the typical welding job: Rodelectrode and TIG welding with lift arc
ignition
• Suitable for construction sites and
workshops
• Generator compatible
• S-mark, CE-mark and C Tick
• Operates on 110 & 240 volts (1400MV)
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
SPECIFICATION
Duty Cycle Rating
• 140 Amps @ 35%
• 80 Amps @ 100%
Dimensions
315 x 110 x 200 mm
Weight
4.8kg
MADE IN AUSTRIA
E l [email protected]
17
WELD
SECTION 1 – MACHINES – TIG - FRONIUS
FRONIUS TRANSPOCKET 125 / 125 VRD
SECTION 1 – MACHINES – TIG - FRONIUS
DC
FRONIUS TIG 1700
PN: 4.075.115
TIG & STICK
240V 170AMP
15AMP
HF
SPECIFICATION
The TIG 1700, with its inverter
technology, offers a portable, lightweight
unit but a heavy weight when it comes
to power and is suitable on construction
sites for the site-erection work or repair
jobs. It is often used in the pipeline / oil
& gas industry and for installation and
maintenance work.
Duty Cycle Rating
• 170 Amps @ 40% 40ºC
• 120 Amps @ 100% 40ºC
• 150 Amps @ 100% 25ºC
Dimensions
430 x 180 x 280 mm
Weight
8.9kg
FEATURES
• TIG-DC & electrode welding
• 240 volt single phase
• Hi Frequency TIG ignition
• Up/down function via torch
• Generator compatible
• Security Code
• Thermostat controlled fan
• 2-step operation / 4-step operation
• S-mark, CE-mark, C Tick
• Digital Display
Fast Finance
Lease – Rent/Buy options
AC/DC
FRONIUS TIG MAGIC WAVE ® 1700 / 2200
PN: MW 1700
4.075.121
PN: MW 2200
4.075.119
Used in the construction of plant,
containers, machinery, structural
steel, automobile, allied vendor and
aerospace industries. Also in the repair
and maintenance of marine vessels,
manufacturing tubular frames such
as high performance bikes and other
vehicles and restoration work.
Suitable
for all
weldabl
e
materia
l
FEATURES
• TIG AC/DC & electrode welding
• 170/220 Amps from 240 Volt single
phase
• Automatic cap-shaping
• Automatic cooling-unit cut out
• Lift arc ignition / HF switch-selectable
• Store up to 100 jobs
• Generator compatible
• Gas test button
• Polarity reversal
• Pulse mode
• Robot interface optional
• Up/Down function via torch
• 2-step / 4-step operation
• Spot-welding
• Digital display
• Over temperature protection
• Earth leakage monitoring
• Carrying strap
• Thermostat-controlled fan
• S-mark, CE-mark, C Tick
TIG
240V 170/220 AMP
15AMP
SPECIFICATION
Duty Cycle Rating
MAGIC WAVE ® 1700
• 170 Amps @ 35%
• 130 Amps @ 60%
• 100 Amps @ 100%
MAGIC WAVE® 2200
• 220 Amps @ 35%
• 170 Amps @ 60%
• 150 Amps @ 100%
Dimensions
MAGIC WAVE® 1700 / 2200
485 x 180 x 344 mm
WEIGHT
1700 14kg
2200 16.5kg
18
!3+&/2!$%-/.342!4)/.4/$!9
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
WELD
PTY LTD
PN: MW 2500
4.075.155
PN: MW 3000
4.075.157
PN: MW 3000 MV
Recommended for use in construction
of chemical plant, tanks, containers,
mechanical, pipeline construction,
automative, railway engineering, site
erection, maintenance and repair firms.
FEATURES
• TIG-AC/DC & electrode welding
• 415 volt 3 phase
• Programmable gas pre-flow
• Programmable starting current
• Programmable upslope
• Continuously adjustable welding
current
• Adjustable down-slope
• Adjustable end-crater current
• Digital end-crater current indicator
• Welding-current-dependant gas postflow
• Programmable AC frequency
• Adjustable AC balance cleaning
• Continuously adjustable AC waveform
• 2-step / 4-step operation
• Non-contact TIG ignition
• Security code
• Digital volt and ammeter with
command value and storable actual
value (hold function)
PN: MW4000
4.075.132
PN: MW5000
4.075.134
Recommended for use in the automobile
and allied vendor industries, construction
of plant, containers, machinery, structural
steel, rail vehicles, rolling stock,
shipbuilding and offshore engineering.
FEATURES
• TIG AC/DC & electrode welding
• 400/500 Amps digital power source
• Automatic cap-shaping
• TAC – special tack mode
• Lift arc ignition / HF switch-selectable
• Store up to 100 jobs
• Generator compatible
• Gas test button
• Polarity reversal
• Pulse mode
• Robot interface optional
• Up/Down function via torch
• 2-step / 4-step operation
• Spot-welding
• Digital display
• Over temperature protection
• Earth leakage monitoring
• Carrying strap
• Thermostat-controlled fan
• S-mark, CE-mark, C Tick
T l 1300 211 200
PTY LTD
SPECIFICATION
Duty Cycle Ratings
MW 2500
• 250 Amps @ 40%
• 170 Amps @ 100%
MW 3000 / 3000 MV
• 300 Amps @ 35%
• 190 Amps @ 100%
Dimensions
MW
2500 / 3000 / 3000 MV
560 x 250 x 435 mm
Weight 26.6kg / 28.1kg / 30kg
F l (03) 5822 0055
3 PHASE
400/500Amps
SPECIFICATION
Duty Cycle Rating
MAGIC WAVE ® 4000
• 400 Amps @ 45%
• 365 Amps @ 60%
• 310 Amps @ 100%
MAGIC WAVE ® 5000
• 450 Amps @ 60%
• 350 Amps @ 100%
Dimensions
MAGIC WAVE® 4000 / 5000
625 x 290 x 705 mm
Weight
58.2kg / 58.2kg
E l [email protected]
19
WELD
415V
• Over temperature indicator
• Error code indication to facilitate
service
• Run status indicator
• Indication of activated hazard
minimization device
• Gas test button
• Thermostat controlled fan
• Generator compatible
• Automatic cooling unit cut off
• S-mark, CE-mark, C Tick
• Up/Down function via torch
AC/DC
FRONIUS TIG MAGIC WAVE® 4000 / 5000
3 PHASE
SECTION 1 – MACHINES – TIG - FRONIUS
AC/DC
FRONIUS TIG MAGIC WAVE® MW 2500 / 3000 / 3000 MV
SECTION 1 – MACHINES – TIG - MILLER, ESSETI, ESAB
MILLER TIG SYNCROWAVE 250DX AC/DC
PN: MR907197
AC/DC
TIG
Duty Cycle Rating
3 - 310 Amps
225 Amps @ 40%
FEATURES
: Fan on Demand
: AC/DC TIG Welding
: Pulse Option
: Sequencer Option
: Heavy Duty
Weight 185kg
FEATURES
: Lift ARC TIG
: Hot Smart ARC
: 2 Year Warranty
: VRD
PN: THOR175
VRD
150AMP
240v
15AMP
175AMP
SPECIFICATIONS
Duty Cycle Rating
240V 1 Phase
5 - 150 Amps
150 Amps @ 30%
Weight 4.5kg
TIG/STICK
ESSETI 175CDC
240v
15AMP
3 YEAR WARRANTY
TIG/STICK
PN: ESSETI150
320AMP
SPECIFICATIONS
Electronically controlled high
performance AC/DC constant current
power source for high precision TIG
and manual Arc welding.
ESSETI 150DC
415v
VRD
SPECIFICATIONS
FEATURES
: Lift ARC TIG
: Hot Smart ARC
: 2 Year Warranty
: VRD
Duty Cycle Rating
240v 1 Phase
5 - 175 Amps
170 Amps @ 55%
Weight 6.5kg
TIG HF DC
ESSETI 154DC
PN: ESSETI154HF
FEATURES
: HF Start
: 2T / 4T
: Down Slope Setting
240v
15AMP
150AMP
HF
SPECIFICATIONS
Duty Cycle Rating
240v 1 Phase
5 - 150 Amps
150 Amps @ 30%
Weight 5.5kg
STICK/TIG
ESAB CADDY 151
PN: ARC151i
240v
15AMP
150AMP
SPECIFICATIONS
FEATURES
: Digital Meter
: Adjustable Hot Start
: 2 Year Warranty
Duty Cycle Rating
240v 1 Phase
3 - 150 Amps
150 Amps @ 25%
IT’S
BACK
20
Weight 8kg
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
WELD
PTY LTD
PN: KUMJR180P
FEATURES
• HF Start
• 2 Pulse Settings
• 2T / 4T Trigger
• Down Slope
• Post Gas Adjustment
180AMP
HF
SPECIFICATIONS
SPE
Duty Cycle Rating
240v 1 Phase
180 Amps TIG
Weight 8kg
Weig
240v
15AMP
UNIMIG AC/DC 200 TIG HF
200AMP
PN: KUMJR200AC/DC
SPECIFICATIONS
• Foot Control Option
Duty Cycle Rating
• Adjustable Down Slope
240v
1 Phase
• 2T / 4T trigger Function
185 Amps @ 20%
• Adjustable Pulse Control
• HF Start AC/DC TIG Function
Weight 30kg
• Adjustable Pre Gas – Post Gas
• Adjustable AC Balance Control
10 - 185 Amps
• Rugged Metal Case Construction
• Tolerant to Variable Power Supply
• Electrode Hot Start and Adjustable Arc Force
Real
SECTION 1 – MACHINES – TIG - UNITIG
240v
15AMP
UNITIG 180PII DC HF TIG
Value for
Money
UNIMIG AC/DC 315 TIG HF
415v
PN: KUMJR315AC/DC
• Foot Control Option
• Adjustable Down Slope
• 2T / 4T trigger Function
• Adjustable Pulse Control
• HF Start AC/DC TIG Function
• Adjustable Pre Gas – Post Gas
• Adjustable AC Balance Control
• Rugged Metal Case Construction
• Tolerant to Variable Power Supply
• Electrode Hot Start and Adjustable
Arc Force
Power Voltage
AC415V+/-15% 3 Phase
Input Frequency (Hz)
50 / 60
Input Current
MMA / 18A TIG / 12.6A
Effective Current
MMA / 13A TIG / 9A
Power Rating
12.2kVA
Range Output Current
10-315A
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
315AMP
Efficiency (%)
85
Load Duty Cycle
TIG 300A – 20%
MMA 250A – 20%
TIG 190A – 100%
MMA 160A – 100%
Power Factor
0.93
Insulation Class
F
Protection Class
IP21S
Weight (kg)
37
Dimensions (mm) 560 x 365 x 355
Machine Package Includes
SR26-4m TIG Torch / 4m Earth Lead /
Argon Regulator
Gas Hose / 315P AC/DC Machine
E l [email protected]
21
WELD
3 PHASE
SECTION 1 – MACHINES – ENGINE DRIVES - AC POWER - MILLER - LINCOLN
AC POWER 200 AMP WELDER / GENERATOR
13 HP
PN: ACH 200Wp
SPECIFICATIONS
PN: ACH 200WE
13 HP Honda GX390
C 7KVA 240v Power
C 200 Amp AC Welder
FEATURES
C Posilock Rubber Mounts
C Brushless Generator
C Electric Start Options
C Invertor Capability
C The mobile workshop for your on-site
maintenance and fabrication
7KVA
240v
Weight 81kg
MILLER ENGINE DRIVES - 250 Amp - 300 Amp - 600 Amp - 750 Amp
MILLER BOBCAT 250
PN: PETROL - MR907211018 DIESEL - MR907213013
Toughest, most powerful twin cylinder
engine driven welder in its class.
Designed for those who need a machine
with excellent Arc performance for all
types of welding jobs.
FEATURES
C Auto Idle
C Fully Enclosed
C 45 Litre Tank
C Twin Cylinder - Petrol
SPECIFICATIONS
C 250 Amp @ 100% Duty Cycle
C AC / DC 250 Amps
C 11KVA 240v Power
C 22 HP Kohler Petrol Motor
C 20 HP Kubota Diesel Motor
Weight 254kg
MILLER BIG BLUE AIR PAK
PN: MR907062011
The big blue air pak performs the duties
of three machines: welder, generator
and air compressor. A go-anywhere
solution to field jobs requiring welding,
gouging or cutting, compressed air and
AC power generation.
FEATURES
C Welder & Air Pack
C Independent Intersoll Rand
Compressor - Rotary Screw
C Quiet - 79db Max
SPECIFICATIONS
C 20 - 750 Amps
C 500 Amps @ 100% Duty Cycle
C 4KA 240v Power
C 100psi @ 60 CFM @ 100% Duty Cycle
Weight 899kg
• MIG Wire Feeder to suit – Page 12
LINCOLN ENGINE DRIVE - 230 Amp - 300 Amp - 400 Amp - 700 Amp
LINCOLN RANGER 350D
PN: K2279-2
SPECIFICATIONS
The Ranger 305D is a powerful 300 Amp
DC multi-process diesel engine driven
welder with excellent Arc characteristics,
including Lincoln’s CT chopper
technology.
C 300 Amps DC
C 250 Amps @ 100% Duty Cycle
C 8KVA 240v & 415v Power
Weight 341kg
FEATURES
C Diesel Engine - Kubota
C Auto Idle
C Digital Meters
C 1 Phase 240v / 3 Phase 415v
C Sound Reduced - 69dbA @ 7m
22
200AMP
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
8000
UOUS
CONTIN OF
WATTS AC
15v
240 & 4 ARY
AUXILI
POWER
WELD
PTY LTD
The Performance Standard For Plasma Cutting
1 Phase
X30®
HYPERTHERM POWERMA
PN: 088005 Standard package
PN: 088006 Deluxe package
POWER SUPPLY FEATURES
• Dual voltage (120/230V, 1-PH,
50/60Hz)
• 30amps, 2.49KW output
• No air regulator required
• Boosted open circuit voltage
• Consumables storage compartment
• Active electronic pilot arc controller
• ISO 9001 and CE compliant
Duty Cycle Rating
• 30 Amps @ 50%
Cut Capacity
Hand:
• Recommended:
• Maximum:
• Severance:
Gouging:
• Not recommended
s/.,9KG
1/4” (6mm)
3/8” (10mm)
1/2” (12mm)
LY
TYPICAL M
R
E
H
T
R
HYPE
T
LES LAS
B
A
M
U
S
CON
4
to
T3
AT LEAS ER THAN
NG
O
L
S
E
TIM
ABLE
COMPAR S
D
N
A
R
B
1Phase & 3 Phase 240v
HYPERTHERM POWERMAX 45®
240v
415v
PN: 088020 415v Hand System 6m Torch
PN
PN: 088018 240v Hand System 6m Torch
POWER SUPPLY FEATURES
• Auto-voltage circuit
• Boost conditioner circuit
• CNC interface
SYSTEM SPECIFICATION
• Input voltages 200–240V, 1-PH, 400V
3-PH
• Input current 200–240V, 34–28A 1-PH,
400V, 10A 3-PH
• Output voltage 132VDC
• Output current 20-45A
• Maximum OCV 275 VDC
• Gas supply – Air or N2
• Flow rate 360 scfh (170l/min)
• Flow pressure 90 psi (6.2bar)
• 15.8kg with torch
Cut Capacity
Hand:
1/2” (12mm)
• Recommended:
• Maximum:
3/4” (19mm)
• Severance:
1” (25mm)
Machine:
3/8” (10mm)
• Maximum:
Gouging:
• Metal Removal Rate Air 6.2lbs/hr
2.8kg/hr
T45V and T45M Consumable Features
• Fast connect torch connection
• Dual angle design
• Powercool™ design
For torch parts, please refer to page 54.
3 YEAR WARRANTY
3 Phase
HYPERTHERM POWERMAX 1000®
PN: 083192 415v Hand System 7.5m Torch
PN: 083193 415v Hand System 15m Torch
POWER SUPPLY FEATURES
•
•
•
•
•
60 amps, 8.4kW output
Auto-voltage circuit
Boost conditioner circuit
Standard CNC interface
Pilot arc controller with deactivation
switch
• Dual-threshold pilot arc circuit
• ISO 9001 and CE compliant
SYSTEM SPECIFICATION
• Auto input voltages 230-400V, 3-PH,
50/60 Hz, CE
• Input current 415V 15A
• Output voltage 140VDC
• Output current 20-60A
• Maximum OCV 300 VDC
• Gas supply – Air or N2
• Flow rate 400 scfh (189l/min)
• Flow pressure 70 psi (4.8bar)
• 83lbs (37kg)
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
415v
D t Cycle
C l R
ti
Duty
Rating
• 60 Amps @ 50% 230-600V 3-PH
Cut Capacity
Hand:
• Recommended:
• Maximum:
• Severance:
Machine:
• Recommended:
• Maximum:
Gouging:
• Metal Removal Rate
3/4” (19mm)
1” (25mm)
1 1/4” (32mm)
3/8” (10mm)
1/2” (12mm)
Air 10.0lbs/hr
(4.5kg/hr)
T60 and T60M Torch & Consumable
Features
• Safety trigger
• ETR (Easy Torch Removal)
• Contact-start arc initiation
• HyLife electrode technology
• Coaxial-assist jet technology
• Shielded front-end consumables
For torch parts, please refer to page 57.
3 YEAR WARRANTY
E l [email protected]
23
WELD
SECTION 1 – MACHINES – PLASMA - HYPERTHERM
HYPERTHERM MANUAL PLASMA CUTTING SYSTEMS
SECTION 1 – MACHINES – PLASMA - HYPERTHERM
3 Phase
HYPERTHERM POWERMAX 1250®
POWER SUPPLY
Y FE
FEATURES
ATURES
• 80 amps, 12kW output
• Auto-voltage circuit
• Boost conditioner circuit
• Standard CNC interface
• Pilot arc controller with deactivation
switch
• Dual-threshold pilot arc circuit
• ISO 9001 and CE compliant
LY
TYPICAL M
HER
T
R
E
P
Y
H
AST
ABLES L
CONSUM ST 3 to 4
AT LEA ER THAN
ONG
TIMES L ARABLE
COMP
BRANDS
SYSTEM SPECIFICATION
• Auto input voltages 230-400V, 3-PH,
50/60 Hz, CE
• Input current 415V 21A
• Output voltage 150VDC
• Output current 25-80A
• Maximum OCV 300VDC
• Gas supply – Air or N2
• Flow rate 550scfh (260 l/min)
• Flow Pressure 70 psi (4.8bar)
• 96.6lbs (44kg)
3 YEAR WARRANTY
Dutty Cycle
Cycle
l R
Rating
ati
ting
Duty
• 80 Amps @ 60% 230-600V 3-PH
Cut Capacity
Hand:
7/8” (22mm)
• Recommended:
• Maximum:
1 1/8” (29mm)
• Severance:
1 1/2” (38mm)
Machine:
3/8” (10mm)
• Recommended:
• Maximum:
5/8” (16mm)
Gouging:
• Metal Removal Rate Air 12.2lbs/hr
(5.5kg/hr)
T80 and T80M Torch & Consumable
Features
• Safety trigger
• ETR (Easy Torch Removal)
• Contact-start arc initiation
• HyLife electrode technology
• Coaxial-assist jet technology
• Shielded front-end consumables
For torch parts, please refer to page 58.
3 Phase
HYPERTHERM POWERMAX 1650®
POWER
P
OWER
OW
ER S
SUPPLY
UPP
UP
PLY
YF
FEATURES
EAT
ATUR
URE
ES
• 100 amps, 16kW output
• Auto-voltage circuit
• Boost Conditioner circuit
• Standard CNC interface
• Pilot arc controller with deactivation
switch
• Dual-threshold pilot arc circuit
• ISO 9001 and CE compliant
SYSTEM SPECIFICATIONS
• Auto input voltages 230-400V, 3PH,
50/60 Hz, CE
• Input current 400V 27 A
• Output voltage 160VDC
• Output current 30-100A
• Maximum OCV 300 VDC
• Gas supply – Air or N2
• Flow rate 550scfh (260 l/min)
• Flow pressure 175psi (5.1bar)
• 128.0lbs (58kg)
3 YEAR WARRANTY
3 Phase
24
PAC200T and PAC200E Torch &
Consumable Features
• Safety trigger
• High frequency starting
• Water cooled torch
T l 1300 211 200
F l (03) 5822 0055
415v
Duty
Dut
Du
ty Cycle
Cycl
Cy
cle
le R
ati
at
tin
ing
ing
Duty
Rating
• 100 Amps @ 80% 400-600V
Cut Capacity
Hand:
1 1/4” (32mm)
• Recommended:
• Maximum:
1 1/2” (38mm)
• Severance:
1 3/4” (44mm)
Machine:
1/2” (12mm)
• Recommended:
• Maximum:
3/4” (19mm)
Gouging:
• Metal Removal Rate Air 22.8lbs/hr
(10kg/hr)
T100 and T100M Torch & Consumable
Features
• Safety trigger
• ETR (Easy Torch Removal)
• Contact-start arc initiation
• HyLife electrode technology
• Coaxial-assist jet technology
• Shielded front-end consumables
For torch parts, please refer to page 59.
HYPERTHERM MAX 200®
SYSTEM SPECIFICATION
• Input voltages 415V, 3-PH, 50Hz, CE
• Input current 415V 52A
• Output voltage 150VDC
• Output current 40-200 A
• Maximum OCV 280VDC
• Plasma gas supply – Air, N2, O2, Air-Hz
• Shield gas supply – Air, N2, O2
• Plasma flow rate 66scfh (31 l/min)
• Shield flow rate 280scfh (132 l/min)
• Plasma flow pressure 120psi (8.3bar)
• Shield flow pressure 90psi (6.2bar)
• 780.0 lbs (351kg)
415v
415v
• Ergonomic torch design
• Safety retaining cap “in place” sensor
circuit
• Shielded front-end consumables
Duty Cycle Rating
• 200 Amps @ 100%
Cut Capacity
Hand:
• Recommended:
• Maximum:
• Severance:
Machine:
• Recommended:
• Maximum:
Gouging:
• Metal Removal Rate
E l [email protected]
1 1/2” (38mm)
2” (50mm)
2 1/2” (64mm)
1” (25mm)
2” (50mm)
H35 46.0lbs/hr
(21kg/hr)
WELD
PTY LTD
ACCESSORIES
Air filtration kit
PN: 128647
Hand gouging heat shield
PN: 128658
Circle cutting guide
Facilitates consistent and accurate
measured circles in work pieces. Also
used as a stand-off guide in bevelling
applications.
To obtain the best possible performance
Hypertherm have a range of products to
optimise your system. These products
are designed to enhance your plasma
cutting experience and obtain the
maximum life from the consumables.
Wheel kit
A complete, pre-assembled kit for added
mobility when the machine must be
moved.
AVAILABLE PRODUCTS
Wheel kit
PN: 128646
Air filtration kit
Circle cutting guide
PN: 027768 Deluxe Kit
PN: 027102 Basic Kit
Leather torch sheathing
PN: 024548
FineCut consumables kit
PN: 128889
Plasma cutting face shield
PN: 127103 (Shade 8)
Leather cutting gloves
PN: 127169
FineCut consumables kit
A ready-to-install kit with a .85 micron
filter to protect against contaminated
air, as well as an autodrain moisture
separator.
For superior cut quality on thin plate,
mild and stainless steel.
Leather torch sheathing
Available in 25-foot sections, this option
provides additional protection for
torch leads against burn-through and
abrasion.
Hand gouging heat shield
Provides additional protection in gouging
operations.
SPECIFICATION
Air filtration kit
Hand gouging heat shield
Wheel kit
Circle cutting guide
Leather torch sheathing
FineCut consumables kit
30
N/A
600
128647
1000
128647
N/A
N/A
N/A
N/A
N/A
128378
027668
027668
027668
024548
024548
N/A
N/A
1250
128647
1650
128647
MAX 200
128647
128658
128658
128658
128646
128646
128788
027668
027668
027668
024548
024548
024548
024548
128887
128888
128888
128888
Fast Finance
Lease – Rent/Buy options
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
E l [email protected]
25
WELD
SECTION 1 – MACHINES – PLASMA - HYPERTHERM
HYPERTHERM MANUAL PLASMA CUTTING SYSTEM ACCESSORIES
SECTION 1 – MACHINES – PLASMA - UNIPLAS
1 Phase
UNIPLAS - CUT40
PN: KUPJR40
240v
SPECIFICATIONS
FEATURES
F
_
• Input Voltage (V) 240v Ac +10%
• Input Frequency (H) 50/60
• Input Capacitance (KVA) 6
• No-load Voltage (V) 230
• Current Range (A) 20-40
• Output Cutting Voltage (V) 96
• Efficiency (%) 85
• Power Factor 0.93
• Insulation Class B
• Protection Class IP23
• Contact Arc Starting (HF)
• Air Flow (Litres/min) 90
• Compressed Air Pressure 4.8 bar
• Recommenced Cutting (mm) 8
• Max. Cutting Thickness (mm) 10
Rated Duty Cycle
30% @ 40 Amps
100% @ 25 Amps
Size 371L x 155W x 295H mm
Weight 12kg
Machine Package Includes
• Air Regulator
• Plasma Torch
• 4m Earth Lead
• CUT40 Air Plasma Cutter
3 Phase
UNIPLAS - CUT55
PN: KUPJR55
415v
SPECIFICATIONS
FEATURES
_
• Input Voltage (V) 415v Ac +10%
• Input Frequency (H) 50/60
• Input Capacitance (KVA) 11
• No-load Voltage (V) 270
• Current Range (A) 20-55
• Output Cutting Voltage (V) 104
• Efficiency (%) 85
• Power Factor 0.93
• Insulation Class IP23
• Protection Class F
• Max. Cutting Thickness (mm) 20
Rated Duty Cycle
30% @ 55 Amps
100% @ 40 Amps
Size 540L x 220W x 370H mm
Weight 21kg
Machine Package Includes
• Air Regulator
• Plasma Torch
GET
• 4m Earth Lead
T
A GREA
• CUT55 Air
R
O
F
T
U
C
Plasma Cutter
R
U
YO
BUCK
3 Phase
UNIPLAS - CUT105
PN: KUPJR105
26
FEATURES
_
• Input Voltage (V) 415v Ac +15%
• Input Frequency (H) 50/60
• Input Capacitance (KVA) 16.5
• No-load Voltage (V) 340
• Current Range (A) 20-105
• Output Cutting Voltage (V) 124
• Efficiency (%) 85
• Power Factor 0.93
• Insulation Class IP23
• Protection Class F
T l 1300 211 200
F l (03) 5822 0055
415v
SPECIFICATIONS
Rated Duty Cycle
30% @ 105 Amps
100% @ 75 Amps
Size 580L x 335W x 590H mm
Weight 30kg
Machine Package Includes
• Air Regulator
• Plasma Torch
• 4m Earth Lead
• CUT105 Air Plasma Cutter
E l [email protected]
WELD
PTY LTD
1 PHASE
240V
CLASSIC ‘K’ SINGLE PHASE SERIES
FEATURES
3 YEAR COMPRESSOR PUMP WARRANTY
• Premium cast iron cylinder range of air compressors. Suitable for heavy duty industrial use
• 6 models available with sizes from 148L/min to 419L/min and working pressures to 1000kpa
• High quality and oversized componentry to give the air compressors longer trouble free life
with less wear and tear
• High standards ensure reliability
• A huge range available!!
ELECTRIC ‘PILOT’ AIR COMPRESSORS
3 PHASE
415V
THREE PHASE INDUSTRIAL SERIES
FEATURES
3 YEAR COMPRESSOR PUMP WARRANTY
• Premium cast iron cylinder range of air compressors. Suitable for heavy duty industrial use
• 7 models available with sizes from 428L/min to 2311L/min and working pressures to
1100kpa. All models are of static configuration
• All models are two staged and offer aftercooler and intercooler design to increase efficiency
and provide high pressure capabilities
• High quality and oversized componentry to give the air compressors longer trouble free life
with less wear and tear
• High standards ensure reliability
• A huge range available!!
PETROL ‘PILOT’ AIR COMPRESSORS
PETROL INDUSTRIAL SERIES
FEATURES
3 YEAR COMPRESSOR PUMP WARRANTY
• Premium cast iron cylinder range of air compressors. Suitable for heavy duty industrial use
• 6 models available with sizes from 148L/min to 981L/min and working pressures to 1100kpa.
• Includes full engine idle-down control for longer life, models with 2.5hp to 5.5hp engines
feature recoil starts, with 9hp to 11hp featuring both electric and recoil starts
• All models are two staged and offer aftercooler and intercooler design to increase efficiency
and provide high pressure capabilities
• High quality and oversized componentry to give the air compressors longer trouble free life
with less wear and tear
• High standards ensure reliability
• A huge range available!!
SECTION 1 – MACHINES – AIR COMPRESSORS - PILOT
ELECTRIC ‘PILOT’ AIR COMPRESSORS
SILENCED ‘PILOT’ AIR COMPRESSORS
Description
The Pilot Air range of Silenced Air Compressors provide the solution for sites
subject to stringent environmental requirements. The Silenced series of air
compressors combine noise reduction with the reliability and efficiency built into all
Pilot Air Compressors.
FEATURES
• Steel cabinets lined with acoustic foam to deaden noise and designed to maximise cooling
air flow through the cabinet
• Thermostatically controlled cooling combined with over-temp protection ensure correct
temperature operation of the unit
• Steel cabinets feature a durable powder coat finish
• Cast iron cylinders and stainless steel valves provide a long life and a high level of efficiency
and reliability.
• All units feature auto stop/start control
odels
Many m –
• Model K17SI features a regulated and non-regulated outlet to suit all
le
b
a
il
a
v
a
installations
ntact
o
c
e
pleas
• Model K25SI to K50SI models feature a touch-type control/diagnostic
her
rt
us for fu on
panel complete with rotation protection, over-temp protection and
ti
a
rm
info
indication for compressor and cooling fan operation
• Other brands available – don’t hesitate to ask
T l 1300 211 200
PTY LTD
F l (03) 5822 0055
E l [email protected]
27
WELD
SECTION 1 – MACHINES – TIG BRUSH
1 PHASE
TIG BRUSH
240v
10AMP
TIG BRUSH STAINLESS STEEL WELD CLEANING SYSTEM
PN: TB-0250 3M
NCE
EXPERIE USH
R
B
IG
THE T
ENON
M
O
N
E
H
P
NOW!
The TIG BRUSH SYSTEM has solved the access and burn through problems of hard
FAST
electrodes, by replacing them with a brush. The unique brush design provides fast,
Instant Results
high quality results even in the most inaccessible areas.
The
even distribution
ofCleaning
current going
into&the
workpiece, plus the greater amount
• OH
S compliant
Fast Weld
• Lightning
of
cleaning
solution
held
in
the
brush
gives
a
faster
and higher quality result. Work
• Quick, safe cleanup
• Best practice finish
can
be cleaned
Works on all thicknesses
• Low
running while
costs the customer •waits.
Cleans
Plate Thicknesses
Instant all
results
Variable
power
adjustment
givesgoing
the TIG
the unique
ability
cleanamount
welds of
The even distribution
of current
intoBrush
the workpiece,
plus
the to
greater
not
only on
thin gauges,
on materials
all thicknesses.
Works result.
on all grades
of
cleaning
solution
held in but
the brush
gives aoffaster
and higher quality
Work can
be cleaned
while
customer
waits.
stainless
steel
andthe
even
brightens
brass and copper.
Cleans
all plate
thicknesses
The
speed
and finish
have to be seen to be appreciated: call us to arrange a
Variable power adjustment gives the TIG Brush the unique ability to clean welds
demonstration.
not only on thin gauges, but on materials of all thicknesses. Works on all grades of
stainless steel and even brightens brass and copper.
SAFE
Environmentally Friendly
Environmentally Friendly
The TIG Brush activates a very mild solution to get a faster, more thorough and
The TIG Brush activates a very mild solution to get a faster, more thorough and
gentler clean. Low voltage power minimises the risk of injury to operator and damage
gentler
voltage
power minimises the risk of injury to operator and
to workclean.
piece Low
or other
equipment.
damage to work piece or other equipment.
No Special Cleanup Required
No Special Cleanup Required
After a weld has been ‘TIG Brushed’ it is rinsed with water. No harsh chemicals
need to be disposed of with expensive and slow procedures.
Say goodbye to pickling paste forever.... and cleaning really is a breeze!
FLEXIBLE
Soft Brush
The soft and conductive bristles hold the solution and conform to any shape. The
brush works equally well on flat surfaces, in tricky corners and deep crevices.
Portable and Compact
Smallest machine of its type. The TIG Brush is designed to go where needed,
including remote work sites. Long leads and a light brush handle give unparalleled
reach and flexibility.
If you can weld it... TIG Brush can clean it!
EFFICIENT
Low Running Costs
• Long lasting brush
• Low cost consumables
• Fast clean up
• Proprietary design means low power input yields high power results
High quality and low cost through innovation!
TOUGH
Robust and Simple
Purpose built plastic case protects the electronics from bumps and spills. Simple
controls provide 9 different settings. Handy tips are provided in the user’s manual.
Goes where your welder goes!
CONSUMABLES
28
• TB-1006 Brush Tip
• TB-0027 Brush Shroud
• TB-25-1 Fluid 1 Litre
• TB-25-5 Fluid 5 Litres
• TB-3001 Extension Leads
T l 1300 211 200
F l (03) 5822 0055
E l [email protected]
WELD
PTY LTD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement