the Document Camera Stand Assembly Guide 1-800-267-8494 WARNING

the Document Camera Stand Assembly Guide 1-800-267-8494 WARNING
DCS1A
DCS2A
the Document Camera Stand - Assembly Guide
Assembly Guide
DCS1A_DCS2A_2014_F
Check out our other products online at
www.copernicused.com
WARNING
For assistance, please contact us:
1-800-267-8494
Email info@copernicused.com
Have your packing slip ready for reference
?
This product is meant to be assembled by an adult.
?
In its unassembled state, small parts present a hazard.
?
To be used under direct supervision of an adult.
Check out some of our
other great products!
www.copernicused.com
Need Tech Support?
Have a Question?
Magnetic LED Light is
ONLY included with
DCS2A
Email our Tech Support Service
Patent Pending
iPad® not included.
Document Camera Function
only works with iPad mini™,
iPad 2™ & Newer.
Please Recycle
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
Warning! Hazard Risks!
Please read the warnings below for important safety information regarding your product.
Failure to read these warnings or to follow the instructions below could result in personal
injury or damage to your product that could void your warranty.
Small
Parts
In its unassembled state, this product contains parts that can be hazardous to small children. This
product should be assembled by an adult.
This product is to be used under the supervision of an adult.
Adult
Supervision
This product is intended for indoor use only. To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture. The internal components are not sealed from the
environment.
Indoor Use
Only
Read your powerbar’s electrical specifications. Only plug in devices that are approved for use
with this powerbar. Connect the supplied power bar directly to a wall outlet. Do not connect to
another power bar or use an extension cord. Unplug when not in use.
Powerbar
Specifications
Electronic
Equipment
Read the electrical specifications of any electronic equipment you are using with your Copernicus
products. Failure to read these specifications and follow their instructions could result in damage
to your equipment or personal injury.
Ensure that any cables extending across the floor to your product are properly bundled and
marked to avoid tripping or falling which may lead to personal injury.
Cable Trip
Hazard
Do not install or use the electrical components of this unit during a lightening storm.
Electrical Shock
Do not climb on, hang from or suspend objects from any components of your product unless
otherwise specified.
Climb Hazard
2
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
DCS1A
DCS2A
Tips for Assembly
Watch for These Helpful Symbols
l
This symbol denotes a 2 Person Task. For safety, please ensure that there are two people
2 Person
working on steps displaying this symbol
l
Watch for this symbol throughout the Assembly Instructions. Wherever you see it, pay close
attention. The symbol denotes a step needing extra attention to ensure it is done correctly.
l
The Star symbol highlights an advisory note
Before You Begin
Layout and identify all of the included parts
l
The hardware has been packed by step
l
Read the assembly instructions over once to familiarize yourself with them
l
Please note that in its unassembled state, this product contains parts that can be a hazard
l
to small children; it should be assembled by an adult.
As You Assemble the Unit
l
Follow the steps in sequence
l
Before beginning each step, find the part(s) that you need for that step
l
Pay attention to the labeling on the parts, they are there to help direct you at certain stages
l
The title of each step states what you will be doing. Review the text and the pictures as you
build the unit.
1
Year
Frame
Warranty
Validate Your Warranty On-Line
To validate your warranty submit the ON-LINE form at www.copernicused.com
“The beautiful thing about learning is that no one can take it away from you.” - B. B. King
3
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
DCS1A
DCS2A
!
Dewey
the Document Camera Stand - Assembly Guide
WARNING
Please note that in its unassembled state, this product contains parts
that can be hazardous to small children. This product should be
assembled by an adult.
iPad mini™ Spacer (1)
Headphone
Hanger (1)
Top Arm Pre-Assembly (1)
Inner Tube Pre-Assembly (1)
Magnetic LED Light
(DCS2A) (1)
Outer Tube (1)
Base (1)
4
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
DCS1A
DCS2A
Dewey - Parts
Before beginning, you should have:
Contents - Box 1
Hardware
Actual Size
Top Arm
1x
In Box 1
Positioning
Template
1x
A M6 x 20mm
1x
Portrait Position
for 8.5” x 11” Paper
Landscape Position
for 8.5” x 11” Paper
iPad
& Paper
iPad
&
Paper
B M6 x 45mm
1x
Outer Tube
1x
Inner Tube
1x
C M6 Lock Washer
VGA Strap
1x
1x
Allen Key
(Not to Scale)
1x
Headphone Holder
2x
Bag of extra hardware
1x
Base
1x
iPad mini™ Spacer
1x
Content - Box1
Comes with DCS2A
In Box 1
Magnetic LED Light
1x
Additional Items Needed
Not Included
VGA
Cable
1x
5
Apple® VGA
Adapter
1x
Apple TV®
1x
OR
iPad mini™, iPad 2™
or Newer
1x
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
Actual Size:
1
A M6 x 20mm
1x
You will need: (Not to Scale)
Outer Tube
1x
Base
1x
Assemble the Outer Tube to the Base
Make sure the stop hole is
facing inwards and is placed
on top.
A
Actual Size:
2
You will need: (Not to Scale)
Inner Tube
1x
Place the Inner Tube inside the Outer Tube
Pay close attention to the
orientation of the Valco
Double-End Snap Buttons.
6
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
Actual Size:
3
B M6 x 45mm
C M6 Lock Washer
1x
1x
You will need: (Not to Scale)
Top Arm
1x
Headphone Holder
1x
Assemble the Top Arm & Headphone Holder
The headphone holder holds
up to two headphones.
B
C
To easily assemble the Top
Arm, adjust the height to the
lowest position then assemble
the pieces together.
7
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
Actual Size:
Paper
&
Landscape Position
iPad
& Paper
Portrait Position
Position the Paper Template (OPTIONAL)
for 8.5” x 11” Paper
Positioning Template
1x
iPad
You will need: (Not to Scale)
for 8.5” x 11” Paper
4
Pay close attention to the orientation of
iPad and 8.5”x11” paper. Then match the
edge of the paper with the indicated line
that the arrow points at. This helps to
position your paper in the middle of
your projection.
Landscape Position
for 8.5” x 11” Paper
iPad®
&
Paper
Actual Size:
5
You will need: (Not to Scale)
VGA Strap
1x
Apple® VGA
Adapter
1x
iPad mini™, iPad®2
or Newer
1x
Use VGA Strap to Hold Apple VGA Adapter in Place (OPTIONAL)
To hold the VGA cable in place use provided VGA
strap. Tie the strap around the adapter cable and
then loop over the edge of the top mechanism.
1
2
3
8
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
Actual Size:
6
You will need: (Not to Scale)
OPTIONAL FOR DCS2A
Magnetic LED Light
1x
Positioning the Magnetic LED Light (OPTIONAL)
Use the magnet on the
LED to attach it
anywhere on Dewey’s
Neck.
Suggested spots to mount the
Magnetic LED Light without getting
hot spots.
9
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
the Document Camera Stand - Tips for Use
To Change Projected Image
Holding onto top mechanism - turn iPad® 90 degrees
Portrait Position
Landscape Position
If swivel tension ever
needs to be tighter,
tighten this nut with
10mm wrench.
NOTE: Sometimes when you rotate the iPad® your projected image does not rotate, in that case you need to tilt down
the top mechanism to allow the iPad® to adjust
Changing from Document Camera to Stand Position
Holding onto top Mechanism - tilt between Document Camera Position and Stand Position
If folding tension ever
needs to be tighter,
tighten this nut & bolt
with 10mm wrench
and the provided allen
Securing Dewey to a Surface
Mount Dewey to a surface using the holes on the base.
The holes are made for 1/4” or M6
bolts/screws.
The length of your hardware depends
on your surface thickness.
10
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
the Document Camera Stand - Tips for Use
Using Dewey with iPad mini™
Slide the spacer into
the provided slot
1. Use the iPad mini™ spacer, and set the bottom lip to its minimum position.
Loosen the knob to
slide the bottom lip
into position and then
tighten
2. Then slide green piece out to secure iPad Mini™.
1.
2.
3.
Using Dewey with 10” iPad®
1. There is no need for the iPad mini™ spacer, set up the bottom lip to its maximum position.
Store the spacer under
Dewey’s top mechanism.
Note: To reposition the spacer,
push up, then slide out.
Loosen the knob to
slide the bottom lip
out and then tighten
2. Then slide green piece out to secure iPad®.
1.
11
2.
3.
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
the Document Camera Stand - Tips for Use
Connecting to Your Projector
For iPad mini™, iPad 2™ or newer only:
Use Apple® VGA Adapter and a VGA cord (with two VGA male
outlets) to connect projector to the iPad®.
OR
Use Apple TV® to Connect wirelessly!
To hold the VGA cable in
place use provided VGA Strap
- Tie the strap around the VGA
cable and then loop over the
edge of the top mechanism.
Supported Paper Size
The Document Camera Stand covers surfaces from 10.5” x 7.5” up to 16” x 12” at different hole positions.
NOTE: The provided template is for positioning 8.5” x 11” paper.
Projected Area Size
in Each Hole Position
Highest Hole Position 4 - 16” x 12”
Double lock at the highest hole
(to prevent accidental disassembly)
- Press both to lower height.
Hole Position 3 - 14.25” x 10.5”
Hole Position 2 - 12.5” x 9”
Lowest Hole Position 1 - 10.5” x 7.5”
Suggested Apps
iPad mini™, iPad 2™ Or Newer:
Board Cam
This app allows you to write on top of your image that you are projecting.
Educreations
This app turns your iPad into a recordable whiteboard. It allows you to create a video tutorial.
It has voice recording, realistic digital ink, photo imports, and simple sharing features.
Nearpod
This app enables teachers to use their iPads to manage content on student’s iPads.
Teachers version manages students content and flow of lecture.
Students version receives content, participate in activities and submit responses.
Student &
Teacher Version
NOTE: If the screen of your iPad® turns off while in use, adjust sleep mode time by going to Setting>General>AutoLock. And when you are not using your device put it into sleep mode.
12
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
the Document Camera Stand - Tips for Use
Basic Usage Tips
1. Position stand in lowest height
2. Place your iPad® into the stand.
(See point 3 & 4)
If your case has a flip cover, make
sure it’s open to the side.
3. Match the openings in the top mechanism with the
4. Place your iPad® or iPad mini™ into the top mechanism
VGA outlet on your iPad®.
Place one side first
Slide the moving part out
Place your iPad® and let go
5. For document camera function use the rear camera of your iPad®
6. Use Apple® VGA Adapter to connect your iPad® to your projector
Use the provided VGA Strap to hold
your VGA Adapter in place and stop
it from being disconnected
Paper
&
iPad
for 8.5” x 11” Paper
8. The Provided template helps locate your 8.5” x 11” paper without
looking through the camera. (Optional)
Landscape Position
7. Launch camera app and adjust desired height by sliding the Document
Cameras’ neck up/down.
13
& Paper
iPad
Portrait Position
prevent any sudden drops
for 8.5” x 11” Paper
Hold on to the stand’s neck to
9. By rotating the top mechanism 90 degrees, change between landscape
10.
and portrait projection.
camera and stand position.
By tilting down the top mechanism, switch between document
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
DCS1A
DCS2A
the Document Camera Stand - Assembly Guide
Assembly Guide
DCS1A_DCS2A_2014_F
Check out our other products online at
www.copernicused.com
For assistance, please contact us:
1-800-267-8494
Email info@copernicused.com
Have your packing slip ready for reference
Dear Educator,
Thank you for purchasing one of our products.
I hope the assembly of your Dewey - the Document Camera Stand went well.
If you have any questions, or concerns, or ideas for how we can improve, please call us at 1-800-267-8494,
where someone will be happy to help.
Enjoy using your new product, and happy teaching,
Jim Phillips
President
Quality schools are the
In everyone’s life at some
My idea of education is
Nothing has a better
result of quality teachers
time our inner fire goes
to unsettle the minds of
effect upon children than
going above and beyond
out. It is then burst into
the young and inflame
praise.
the call of duty.
flame by an encounter
their intellects.
VICKI CARUANA
with another human
being. We should all be
ROBERT MAYNARD
HUTCHINS
thankful for those people
who rekindle the inner
spirit.
ALBERT SCHWEITZER
14
DCS1A_DCS2A - Version F - 9 September 2014 - Copernicus Educational Products Inc.
SIR PHILLIP SIDNEY
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising