Zone 1 Hazardous Area (ATEX) Recessed Luminaires HDL102

Zone 1 Hazardous Area (ATEX) Recessed Luminaires HDL102
Recessed Luminaire
HDL 102
Zone 1 Ex em Recessed Luminaire
Specification:
Enclosure:
Steel Powder Coated
or Stainless Steel
Diffuser Frame:
As above
Diffuser:
Toughened Prismatic Glass
Gasket:
Silicone
External Fasteners:
A4 Stainless Steel
T Rating:
T4/T5 Gas and Dust
Surface Temp:
75˚C
Key Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Exposed ‘T’ / Concealed ‘T’ Modular ceiling type.
Plasterboard Non-modular ceiling type.
Plank ceiling type 300mm wide.
Mild steel painted as standard (stainless steel also available).
2 x 18 W, 4 x 18W, 2 x 36W, 4 x 36W, 2 x 58W.
Emergency version available.
For 2 x 18W Compact Fluorescent Luminaire see – HDL 108.
Ease of maintenance and installation.
Wide range of lamp options.
High frequency electronic control gear.
Quick lamp start and flicker free operation control gear.
High ambient areas.
Can be installed in new or existing ceilings.
Lightweight and robust construction.
Cable entries can be positioned to suit customer requirements.
Overvoltage protection 320V for 1 minute.
• Standard/Emergency gear trays interchangeable between luminaries.
• Continuous monitoring of fluorescent lamps ensures safe end of life
shutdown by electronic ballast in accordance with HSE safety notice 8/05.
• Optional mains isolation/battery isolation microswitch available.
Incorporates the new ‘End of Life’ (EoL) protection circuit ballast
– according to DIN EN 61347-2-3 AND IEC 60079-7 Ed 4 Annex H
Engineering Solutions
Design to Manufacture
Hadar Lighting, Jubilee IndustrialWWW.CABLEJOINTS.CO.UK
Estate, Ashington
T: +44 (0) 1670 814 877
Northumberland, NE63 8UG United
Kingdom& DERRICK
F: +44 (0)UK
1670 858 638
THORNE
TEL 0044 191 490 1547 FAX 0044 477 5371
[email protected]
www.hadar-lighting.co.uk
TEL 0044 117 977 4647
FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK
Protection:
II 2GD Ex emb II T4/T5 IP64, Ex tD A21 T75ºC
Certification: ATEX & IEC Ex certified by SIRA
HDL 102
Certification
Ambient
Voltage Range
Certificate
II2GD EX emb II
T4/T5 IP66/67II 2GD
Ex emb II T4/T5 IP64
All ranges T4 - 40ºC to + 55ºC
All ranges T5 - 40ºC to + 40ºC
Emergency -15ºC
110V – 254V
IEX Ex SIR 0.60027
SIRA 06 ATEX 3080
Electrical Specifications:
Electrical Specification
Lamp Options
Power consumption
Power factor
Power supply
2 x 18W T8
32W Circuit Watts at 240V – 0.14A (120V – 0.28A)
2 x 36W T8
62W Circuit Watts at 240V – 0.27A (120V – 0.28A)
Better
220V – 254V, 47/63 Hz AC/DC
2 x 58W T8
92W Circuit Watts at 240V – 0.40A (120V – 0.80A)
than
110V – 130V, 47/63 Hz AC/DC (18W/36W only)
4 x 18W T8
64W Circuit Watts at 240V – 0.28A (120V – 0.56A)
0.95
Emergency version as above – AC only
4 x 36W T8
124W Circuit Watts at 240V – 0.54A (120V – 1.08A)
Installation:
Terminals: Up to 6mm² clamp terminals for live, live switched, neutral, earth and looping are provided. Internal and external earth as standard.
Screw terminals upon request.
Cable Entries: To suit individual customer requirements.
Suspension: To suit individual customer requirements.
Installation: Installation document AL10089 supplied.
Ordering Matrix:
Dimensions:
Field
Options
Product
HDL102
Version
S – Non Emergency
E - Emergency
Fittings
A – Exposed ‘T’
B – Concealed ‘T’
C – Non Modular
D – Plank
Voltage
H – High Voltage (220V – 254V)
M – Medium Voltage (110V – 130V)
Cable Entries
0 – M20 Entries
5 – M25 Entries
Lamp Options
218 – 2 x 18W
236 – 2 x 36W
258 – 2 x 58W
418 – 4 x 18W
436 – 4 x 36W
Dimensions for non modular range of recessibles for modular range dimensions contact the sales dept.
2 x 18W
2 x 36W
2 x 58W
4 x 18W
4 x 36W
A
700mm
1310mm
1610mm
700mm
1310mm
B
299mm
299mm
299mm
599mm
599mm
Notes:
1) Final Product Code should be in the format: HDL102SCH0218.
2) Bi-Pin as standard. Contact sales office for Single Pin.
3) Mild Steel as standard, contact sales office for stainless steel.
4) For Photometric data contact the new sales office.
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK
Weight
10kg
16kg
18kg
15kg
18kg
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement