Hoffman 45361001 Instruction

PDF

Document

Adapter Plate
1. Remove adhesive backing on adapter plate gasket. Align and adhere
gasket to the adapter plate.
2. Position the adapter plate over the desired cutout on the connector panel.
3. Fasten adapter plate to the connector panel using the M4 screws,
lockwashers and hex nuts as shown.
Connector Panel
Parts List
Rev. B
Item
Description
Qty
1
Adapter Plate
1
2
M4 screws
4
3
Gasket
1
4
M4 Lockwasher
4
5
Hex Nut
4
&copy; 2018 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN
P/N 45361001
87567937
">

Hello! I am an AI chatbot specifically trained to assist you with the Hoffman 45361001 Operating instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant is out of keyboard. Please, try again later.

Related

A21ABVA Installation Instructions

Operator Adapter A21ITE Installation Instructions

operator adapter WAMT AMT Installation Instructions

operator adapter I-T-E MAX-FLEX A21ITE Installation Instructions

operator adapter WAMTF Installation Instructions

GEC Installation Instructions

Operator Adapter C361, C371 Installation Instructions

Operator Adapter ABBSV Installation Instructions

Installation Instructions for ABS, 1494V, 1494C, 140G, 140U

Operator Adapter Bulletin 9422 SQDV Installation Instructions

Operator Adapter MAX-FLEX SITEL Installation Instructions

Hoffman Operator Adapter A21ABA Installation Instructions - 1494F Disconnect Switch, 1494D Circuit Breaker