Hoffman WaterShed Instruction

WaterShed
For Variable Depth Disconnect Devices
And Flexible Cable Disconnect Devices
Hoffman Bulletin WS1D
Wall−Mount Disconnect Enclosures
Rev. D
© 2020 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN
P/N 87577115
87577130
WARNING
The functions, fits, and clearances of the installation described hereon are calculated from information
supplied by the manufactures of the equipment to be installed. Be certain to check the function, fits, and
clearances of all equipment both before and after installation to assure that is operates properly and safely and
meets all applicable codes, standards, and regulations.
In the event the completed installation does not function properly or fails to meet any such codes, standards,
or regulations, do not attempt to make alterations or operate the equipment. Report such facts immediately to:
Customer Service Dept.
Hoffman Customer Service
2100 Hoffman Way
Anoka, MN 55303
763 422 2211
http://hoffman.nvent.com/contact-us
NOTICE
To maintain the environmental rating of this enclosure: install in any opening, only listed or recognized disconnect devices,
external mounting feet, or conduit hubs that have the same environmental rating as the enclosure. Install in compliance with the
installation instructions of the device.
INSTALLATION STEPS
Step 1 − Drill mounting panel per manufacturer’s instructions for disconnect device.
Step 2 − Install operating handle on enclosure flange in holes provided. Follow disconnect manufacturer’s instructions.
Step 3 − Install disconnect device on panel. Follow disconnect manufacturer’s instructions for installation
and adjustment.
Step 4 − The nVent HOFFMAN installed door catch and door catch bracket feature vertical adjustment and two horizontal
mounting positions. In some cases, it may be necessary to use the handle manufacture’s supplied door catch.
See disconnect manufacturer’s instructions regarding how to adjust door catch to properly interlock with the disconnect operating
handle.
SEE HANDLE MANUFACTURE'S
INSTRUCTIONS FOR PROPER
ADJUSTMENTS
-2-
© 2020 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN
87577130
STANDARD
MOUNTING
POSITION
ALTERNATIVE
MOUNTING
POSITION
87577130
© 2020 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN
-3-
Rev. D
© 2020 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN
P/N 87577115
87577130
">