Pin and Sleeve DevicesMechanical Interlocks

Pin and Sleeve DevicesMechanical Interlocks
Section G
Pin and Sleeve Devices/Mechanical Interlocks
Index
Product
Page
Configurations Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3
IEC Pin and Sleeve
Watertight Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6
Corrosion Resistant Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-8
Data Center Pin and Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-9
Back Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-10
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-11
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-12
Unfused Circuit-Lock® Mechanical Interlocks
Devices and “Reverse Service” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-17
Accessories and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-18
Fused Circuit-Lock® Mechanical Interlocks
Devices and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-21
Low Profile Pin and Sleeve
Devices and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-24
Low Profile Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-25
IEC Pin and Sleeve Terminal Identification . . . . . . . . . . . . . . . . . . . . . . . . . . G-26
UL 1686 C1 Insulgrip® Pin and Sleeve
Style I and Style II Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-30
“Reverse Service” Style I and II Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-31
Back Boxes and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-32
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-33
Insulgrip® Mechanical Interlocks
Style II, Fused and Unfused Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-37
Hazardous Location Devices
Mechanical Interlocks and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-40
HBL® Watertight
IEC Pin and Sleeve
Insulgrip® NEMA 4X
UL 1686 C1 Pin and Sleeve
Circuit-Lock® Unfused and
Fused Mechanical Interlocks
Back Boxes & Accessories
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-1
Pin and Sleeve Devices
Summary
Hubbell Produces the Highest Quality
and Most Extensive Pin and Sleeve
Offering.
Similar to our Twist-Lock® devices, Hubbell’s Pin and
Sleeve line of plugs, connectors, inlets, receptacles,
mechanical interlocks and accessories are the highest
performing products available. The HBL® series of IEC
pin and sleeve and Insulgrip lines are assembled in the
USA and have a full list of innovative features.
IEC Watertight Devices
Provide safe and dependable
performance in the most
demanding environments. Heavy
duty non-conductive nylon
construction provides impact and
corrosion protection. Thermoset
polyester contact carriers withstand
high temperatures and provide
resistance to electrical tracking.
Insulgrip® NEMA 4X UL 1686
C1 Devices
Metallic where you want it and
non-metallic where you need it.
This tough product line is NEMA
4X rated for use in the harshest
environments. The devices are
fully interchangeable with other
manufacturers of UL1686
C1 devices.
Back Boxes and Accessories
A complete line of metallic
and non-metallic back boxes,
angle adapters, closure caps
and liquidtight adapters are
available. These accessories help
complement the line and aid in the
installation of the product.
G-2
The IEC line of plugs and connectors are made with a
rugged super tough, one-piece housing. The thermoset
polyester contact carrier provides a high resistance to
electrical tracking. They withstand higher temperatures
which may result from overload or arcing. The heavy-duty,
external cord grip provides superior strain relief on the
conductors.
The Insulgrip line of pin and sleeve is listed UL Type 4X
which provides a watertight, dust-tight seal for harsh
environments. The non-metallic bodies of the plugs and
connectors provide excellent insulating, impact and UV
resistant properties. The patented beryllium copper springpin design of the contacts maintains high unit pressure
on mating sleeves. This ensures reliable electrical contact
while minimizing heat rise. There are two styles of Insulgrip
pin and sleeve devices. Style I devices achieve grounding
by attaching the metallic shell to a ground terminal within
the device. Style II devices feature redundant grounding
by including an additional ground pin and sleeve to the
grounding method used in Style I. The full Insulgrip line of
devices is interchangeable with other manufacturers of
UL1686 C1 devices which makes it ideal for use in industrial
applications where multiple manufactures of product may
be present.
Both the IEC and Insulgrip lines of pin and sleeve are used
often in conjunction with mechanical interlocks. Mechanical
interlocks prevent users from mating or breaking the
circuit under load. This feature is critical to maintain a safe
electrical connection. The interlocks are also available in
reverse service applications where a generator is providing
power to an electrical system.
Circuit-Lock® Mechanical Interlocks
Hubbell’s Circuit-Lock enclosure
products virtually eliminate making
or breaking the circuit under load.
This revolutionary design incorporates
a disconnect switch and receptacle
in one compact non-metallic unit.
They are available in either a fused
or non-fused versions.
®
Wiring Device-Kellems
Low Profile Devices
90° Angled plugs and recessed
receptacles allow for connections
in tight spaces. Cords can be
controlled easily along the wall.
The integrated cord grips limit
strain on terminals and prevent
strain on plugs and cables exiting
perpendicular from the wall.
Corrosion Resistant Devices
This superior grade of IEC and
Insulgrip devices are ideal for the
most demanding environments.
Nickel-plated brass on the IEC and
nickel-plated Tellurium copper on
the Insulgrip contacts prevent
corrosion and heat rise.
Reverse Service
Generators and portable power
distribution units require devices to
deliver power in a reverse direction
to power up a piece of equipment
or building. Hubbell manufactures
reverse service devices in both the
IEC and Insulgrip Pin and Sleeve
configurations as well as IEC
Mechanical Interlock Inlets.
www.hubbell-wiring.com
IEC Pin and Sleeve
IEC Configurations Chart
Singly Rated Configurations
Voltage
Hubbell Pin and Sleeve products are designed and
manufactured to meet the International Standard IEC
60309-1 and IEC 60309-2. This device standard calls out
a singly rated, non-interchangeable configuration for every
voltage and type of service throughout the world. Pin and
sleeve device housings are color coded by voltage rating.
The voltage is determined by the location of the female
ground contact relative to the housing keyway. Simply by
manufacturing the device with a ground contact in a certain
“clock” position, the device will be rated for a particular
voltage system. The diagram shows the keying position and
the color coding that is associated with each voltage.
3Ø 250V
2P
Gr ole
ou
11 12 1
10
2
3
9
4
8
7 6 5
380415V
250V
DC 380V 50Hz
440V 60Hz
125V
AC
550V
DC
480V
AC
Color
re
Wi
3 ing
nd
3ØY
120/208V
3
Gr Pol
ou e
n
125/250V
AC
ire
W
4 ing
d
440-460V
(60Hz)
ire
W
5 ng
di
4
Gr Pol
ou e
n
Rated Voltage
100V - 130V
125V/250V
200V - 250V
277V
380V - 480V
500V - 690V
277V
AC
250V
AC
400V DC
3Ø
480V AC
380-415V
AC
3Ø
600V AC
3ØY
277/480V
3ØY
347/600V
200/346V AC
240/415V AC
Typical IEC Pin and Sleeve Catalog Number
HBL4100C12W
HBL 4 100 C 12 W
Hubbell Catalog Number
Watertight
4 Wire
Female Ground Sleeve at “12” O’Clock (125/250V)
100 Amp
Explanation
1 (HBL) Designates
Hubbell Catalog
Number
2 First Digit
3-3 wire
4-4 wire
5-5 wire
www.hubbell-wiring.com
3 Next Series Of Digits
Preceding a letter
20-20 Amp
30-30 Amp
60-60 Amp
100-100 Amp
“C” Connector
4 Letter
5 Last Digit(s)
P-Plug
After the letter. This denotes
R-Receptacle
the position of the ground
C-Connector
sleeve and the assigned
B-Inlet
voltage in the receptacle as
MI-Mechanical
it relates to the hours of the
Interlock
clock. This is done to eliminate
MIF-Mechanical interchangeability between
Interlock Fused
devices with different voltages.
®
Wiring Device-Kellems
6 Letter: W
Watertight
G-3
IEC Pin and Sleeve
RoHS
Watertight Devices
Features and Benefits
IP67
SUITABILITY
Self-Closing Gasketed Cover
Detents into position to fully close automatically.
Corrosion-resistant hardware
Liquidtight Conduit Adapters
Machined aluminum adapters are available to
SURYLGHDPHDQVIRUDWWDFKLQJÜH[LEOHOLTXLGWLJKW
metal conduit to rear of Hubbell Pin and Sleeve
plug or connector
Watertight Neoprene Sealing Glands
Provide a reliable seal at the cable entry point.
3UHYHQWVLQÛOWUDWLRQRIFRQWDPLQDQWV
Color Coded Housings
IEC pin and sleeve devices are color coded
E\YROWDJHIRUHDV\LGHQWLÛFDWLRQ
Insulated Non-Metallic Housing
Super tough, non-conductive and chemical resistant for
heavy duty industrial environments
Powerful Mechanical Cord Grip
Hubbell’s design incorporates two
molded-in teeth to securely grip
the outer cable jacket, and internal
conductors to prevent slippage
and strain on terminations. Captive
barrel nuts ease assembly and
allow higher tightening torque for
maximum cord retention.
G-4
Watertight Cord Entrance
The tapered bore entrance
creates high compression
forces on sealing gland,
providing a watertight seal
around cord. Individual solid
neoprene glands are supplied
to match a full range of cord
sizes and assure watertight
performance.
®
Multi-Contact Spring
(60/63 and 100/125 Amp)
Recessed within the female
sleeve, provides and
maintains high unit pressure
on mating pins to minimize
temperature rise. Broaches
R[LGHÛOPWRDFKLHYHORZ
resistance contact for
cooler operation.
Wiring Device-Kellems
Sequential Contact
Engagement
*URXQGPDNHVÛUVWDQG
breaks last. Neutral makes
second and breaks second
(to prevent a momentary
over-voltage on components
connected phase to neutral).
Phase contacts make last
DQGEUHDNÛUVW
www.hubbell-wiring.com
IEC Pin and Sleeve
RoHS
Watertight Devices
Features and Benefits
IP67
SUITABILITY
Solid One-Piece Pins
Machined from solid brass
for longer life and reliable
electrical contact
Gasketed Sealing Ring
Provides watertight seal when mated
with receptacle or connector
Heavy Duty External Cord Grips
Provide maximum cord retention to
maintain secure terminations
Contact Collar
Raised collar surrounds each phase pin
increasing the tracking resistance between
contacts across the contact carrier face
Rugged One-Piece Housing
Thick wall construction protects
internal components, eliminates
MRLQWVSUHYHQWLQJLQÛOWUDWLRQ
of contaminants. Amperage/
voltage rating and catalog
number molded in housing for
HDV\LGHQWLÛFDWLRQ
www.hubbell-wiring.com
Shrouded Pins
Super tough plug shroud
protects pins from
deforming from physical
abuse. Protects the user
from the possibility of
touching live contacts
during insertion and
withdrawal of mating parts.
Lockout/Tagout
Tapered opening on plug
shroud accommodates up
to ³⁄₈ inch (9.7mm) lock
shackle diameter
Swivel Pressure Pads
16/20 and 30/32 Amp devices
feature patented swiveling
pressure pad terminal screws and
prevent damage to conductor
strands. 60/63 and 100/125 Amp
devices feature large hex-head
stainless steel screws which
provide higher torque levels for
secure terminations. The large
box terminals are designed for
North American conductors.
®
Thermoset Polyester
Contact Carrier
Molded thermoset polyester
provides high resistance to
electrical tracking. Withstands
higher temperatures which
may result from overload or
arcing. Thermoset properties
provide dimensional stability
for this critical assembly.
Wiring Device-Kellems
G-5
IEC Pin and Sleeve
RoHS
Watertight Devices
20 and 30 Ampere – North American Ratings, 16 and 32 Ampere – International Ratings
IP67
SUITABILITY
Rating
Poles
and
Amps Wires
16
20
30
32
Configuration
Recep./
Plug/
Conn.
Inlet
Watertight Devices
Plug
Accessories
Connector
Closure
Back Boxes
Non-Metallic Metallic Caps
AC Voltage
Receptacle
2P 3W
100-130V
HBL316R4W
HBL316P4W
HBL316C4W
HBL316B4W†
BB2030N
2P 3W
220-240V
HBL316R6W HBL316P6W
HBL316C6W
HBL316B6W
BB2030N
3P 4W
380-415V
HBL416R6W
HBL416P6W
HBL416C6W
HBL416B6W†
BB2030N
4P 5W
220/380V
240/415V
HBL516R6W HBL516P6W
HBL516C6W
HBL516B6W
BB2030N
2P 3W
125V
HBL320R4W HBL320P4W
HBL320C4W
HBL320B4W
BB2030N
2P 3W
250V
HBL320R6W HBL320P6W
HBL320C6W
HBL320B6W
BB2030N
2P 3W
480V
HBL320R7W HBL320P7W
HBL320C7W
HBL320B7W
BB2030N
3P 4W
125/250V
HBL420R12W HBL420P12W HBL420C12W HBL420B12W
BB2030N
3P 4W
3Ø 250V
HBL420R9W HBL420P9W
HBL420C9W
HBL420B9W
BB2030N
3P 4W
3Ø 480V
HBL420R7W HBL420P7W
HBL420C7W
HBL420B7W
BB2030N
3P 4W
3Ø 600V
HBL420R5W HBL420P5W
HBL420C5W
HBL420B5W
BB2030N
4P 5W
3ØY
120/208V
HBL520R9W HBL520P9W
HBL520C9W
HBL520B9W
BB2030N
4P 5W
3ØY
277/480V
HBL520R7W HBL520P7W
HBL520C7W
HBL520B7W
BB2030N
4P 5W
3ØY
347/600V
HBL520R5W HBL520P5W
HBL520C5W
HBL520B5W
BB2030N
2P 3W
125V
HBL330R4W HBL330P4W
HBL330C4W
HBL330B4W
BB2030N
2P 3W
250V
HBL330R6W HBL330P6W
HBL330C6W
HBL330B6W
BB2030N
2P 3W
480V
HBL330R7W HBL330P7W
HBL330C7W
HBL330B7W
BB2030N
3P 4W
125/250V
HBL430R12W HBL430P12W HBL430C12W HBL430B12W
BB2030N
3P 4W
3Ø 250V
HBL430R9W HBL430P9W
HBL430C9W
HBL430B9W
BB2030N
3P 4W
3Ø 480V
HBL430R7W HBL430P7W
HBL430C7W
HBL430B7W
BB2030N
3P 4W
3Ø 600V
HBL430R5W HBL430P5W
HBL430C5W
HBL430B5W
BB2030N
4P 5W
3ØY
120/208V
HBL530R9W HBL530P9W
HBL530C9W
HBL530B9W
BB2030N
4P 5W
3ØY
277/480V
HBL530R7W HBL530P7W
HBL530C7W
HBL530B7W
BB2030N
4P 5W
3ØY
347/600V
HBL530R5W HBL530P5W
HBL530C5W
HBL530B5W
BB2030N
2P 3W
100-130V
HBL332R4W† HBL332P4W† HBL332C4W† HBL332B4W†
BB2030N
2P 3W
220-240V
HBL332R6W HBL332P6W
HBL332C6W
HBL332B6W
BB2030N
3P 4W
380-415V
HBL432R6W HBL432P6W
HBL432C6W
HBL432B6W
BB2030N
3P 4W
380V 50Hz
440V 60Hz
HBL432R3W HBL432P3W
HBL432C3W
HBL432B3W†
BB2030N
4P 5W
220/380V
240/415V
HBL532R6W HBL532P6W
HBL532C6W
HBL532B6W
BB2030N
Inlet
Replacement Interiors
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
Recep./
Conn.
Plug/
Inlet
PC320
IN320BF IN320BM
PC320
IN320BF IN320BM
PC420
IN420DF IN420DM
PC520
IN520EF† IN520EM
PC320
IN320AF IN320AM
PC320
IN320BF IN320BM
PC320
IN320BF IN320BM
PC420
IN420CF IN420CM
PC420
IN420DF IN420DM
PC420
IN420DF IN420DM
PC420
IN420DF IN420DM
PC520
IN520EF† IN520EM
PC520
IN520EF† IN520EM
PC520
IN520EF† IN520EM
PC3430 IN330AF IN330AM†
PC3430 IN330BF IN330BM
PC3430 IN330BF IN330BM
PC3430 IN430CF IN430CM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC530
IN530EF IN530EM
PC530
IN530EF IN530EM
PC530
IN530EF IN530EM
PC3430 IN330BF IN330BM
PC3430 IN330BF IN330BM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC530
IN530EF IN530EM
Note: See page G-10 and G-11 for back boxes and accessories, G-12 and G-13 for product dimensions, G-14 and G-15 for product specifications and HP ratings.
See page G-11 for closure caps, purchased separately. PC320, PC420, PC520, PC3430, PC530 are not UL or CSA.
†Consult factory.
G-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
RoHS
Watertight Devices
60 and 100 Ampere – North American Ratings, 63 and 125 Ampere – International Ratings
IP67
SUITABILITY
Rating
Poles
and
Amps Wires
60
63
Configuration
Recep./
Plug/
Conn.
Inlet
Watertight Devices
AC Voltage
Receptacle
Plug
Accessories
Connector
Inlet
Closure
Back Boxes
Non-Metallic Metallic Caps
2P 3W
125V
HBL360R4W HBL360P4W
HBL360C4W
HBL360B4W
BB60N
2P 3W
250V
HBL360R6W HBL360P6W
HBL360C6W
HBL360B6W
BB60N
2P 3W
480V
HBL360R7W HBL360P7W
HBL360C7W
HBL360B7W
BB60N
3P 4W
125/250V
HBL460R12W HBL460P12W HBL460C12W HBL460B12W BB60N
3P 4W
3Ø 250V
HBL460R9W HBL460P9W
HBL460C9W
HBL460B9W
BB60N
3P 4W
3Ø 480V
HBL460R7W HBL460P7W
HBL460C7W
HBL460B7W
BB60N
3P 4W
3Ø 600V
HBL460R5W HBL460P5W
4P 5W
3ØY
120/208V
4P 5W
3ØY
277/480V
4P 5W
3ØY
347/600V
2P 3W
220-240V
3P 4W
380-415V
4P 5W
220/380V
240/415V
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
HBL460B5W
Recep./
Conn.
Plug/
Inlet
PC60
IN360AF
IN360AM
PC60
IN360BF
IN360BM†
PC60
IN360BF
IN360BM†
PC60
IN460CF
IN460CM
PC60
IN460DF
IN460DM
BB601W
PC60
BB602W
IN460DF
IN460DM
PC60
IN460DF
IN460DM
PC60
IN560EF
IN560EM†
PC60
IN560EF
IN560EM†
PC60
IN560EF
IN560EM†
PC60
IN360BFS
IN360BMS†
PC60
IN460DFS
IN460DMS
PC60
IN560EFS†
IN560EMS
PC100
IN3100AF
IN3100AM
PC100
IN3100BF
IN3100BM†
PC100
IN3100BF
IN3100BM†
BB601W
BB602W
BB601W
HBL560R9W HBL560P9W HBL560C9W HBL560B9W BB60N
BB602W
BB601W
HBL560R7W HBL560P7W HBL560C7W HBL560B7W BB60N
BB602W
BB601W
HBL560R5W HBL560P5W HBL560C5W HBL560B5W BB60N
BB602W
BB601W
HBL363R6W HBL363P6W HBL363C6W HBL363B6W BB60N
BB602W
BB601W
HBL463R6W HBL463P6W HBL463C6W HBL463B6W BB60N
BB602W
BB601W
HBL563R6W HBL563P6W HBL563C6W HBL563B6W BB60N
BB602W
BB1001W
HBL3100R4W HBL3100P4W HBL3100C4W HBL3100B4W BB100N
BB1002W
BB1001W
HBL3100R6W HBL3100P6W HBL3100C6W HBL3100B6W BB100N
BB1002W
BB1001W
HBL3100R7W HBL3100P7W HBL3100C7W HBL3100B7W BB100N
BB1002W
HBL460C5W
Replacement Interiors
BB60N
100 2P 3W
125V
2P 3W
250V
2P 3W
480V
3P 4W
125/250V
HBL4100R12W HBL4100P12W HBL4100C12W HBL4100B12W BB100N
BB1001W
PC100
BB1002W
IN4100CF†
IN4100CM
3P 4W
3Ø 250V
HBL4100R9W HBL4100P9W HBL4100C9W HBL4100B9W BB100N
BB1001W
PC100
BB1002W
IN4100DF
IN4100DM
3P 4W
3Ø 480V
HBL4100R7W HBL4100P7W HBL4100C7W HBL4100B7W BB100N
BB1001W
PC100
BB1002W
IN4100DF
IN4100DM
3P 4W
3Ø 600V
HBL4100R5W HBL4100P5W HBL4100C5W HBL4100B5W BB100N
BB1001W
PC100
BB1002W
IN4100DF
IN4100DM
4P 5W
3ØY
120/208V
HBL5100R9W HBL5100P9W* HBL5100C9W HBL5100B9W BB100N
PC100
IN5100EF
IN5100EM
4P 5W
3ØY
277/480V
HBL5100R7W HBL5100P7W HBL5100C7W HBL5100B7W BB100N
PC100
IN5100EF
IN5100EM
4P 5W
3ØY
347/600V
HBL5100R5W HBL5100P5W HBL5100C5W HBL5100B5W BB100N
PC100
IN5100EF
IN5100EM
125 2P 3W
220-240V
HBL3125R6W HBL3125P6W HBL3125C6W HBL3125B6W BB100N
PC100
IN3100BFS† IN3100BMS†
3P 4W
380-415V
HBL4125R6W HBL4125P6W HBL4125C6W HBL4125B6W
PC100
IN4100DFS
IN4100DMS
4P 5W
220/380V
240/415V
HBL5125R6W HBL5125P6W HBL5125C6W HBL5125B6W BB100N
PC100
IN5100EFS
IN5100EMS
BB100N
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
Note: See page G-10 and G-11 for back boxes and accessories, G-12 and G-13 for product dimensions, G-14 and G-15 for product specifications and HP ratings.
All 63A and all 125A devices have pilot pins or contacts.
See page G-11 for closure caps, purchased separately. PC60 and PC100 are not UL or CSA.
*See page G-12 for additional information on short housing plug. IP22 suitability - length 8.30" (210.8).
†Consult factory.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-7
IEC Pin and Sleeve
Corrosion Resistant Devices
100 Ampere Devices
IP67
Devices that Withstand the Most Abusive Environments
RoHS
SUITABILITY
Hubbell offers a superior grade of 100A IEC Pin and Sleeve designed for use in the most demanding environments. These
devices feature nickel plated solid brass pins for long life and reliable electrical contact in the most corrosive environments.
They have a high visibility yellow supertough nylon housing. The heavy duty external cord clamps provide maximum cord
retention to maintain secure terminations. The screws and fasteners are made from stainless steel.
s)RRG3URFHVVLQJ
s:DWHU7UHDWPHQW
s0HDW3DFNLQJ
s$JULFXOWXUH
s)DFWRU\
s:DVKGRZQ
s&RQVWUXFWLRQ
s2XWGRRU(QWHUWDLQPHQW
s7HPSRUDU\3RZHU
Standard Service
Rating
Amps
100
Poles
And
Wires
ConÛguration
Recep./
Conn.
Plug
Watertight Devices
AC Voltage
Receptacle
Plug
Accessories
Connector
Back Boxes
Non-Metallic Metallic
Closure
Caps
3P 4W
125/250V
M4100R12
M4100P12
M4100C12
BB100N
BB1001W
BB1002W
PC100
4P 5W
3ØY
120/208V
M5100R9
M5100P9
M5100C9
BB100N
BB1001W
BB1002W
PC100
4P 5W
3ØY
277/480V
M5100R7
M5100P7
M5100C7
BB100N
BB1001W
BB1002W
PC100
"Reverse Service"
Rating
Amps
100
Poles
And
Wires
ConÛguration
Conn.
Inlet
Watertight Devices
Plug
Accessories
Connector
Back Boxes
Non-Metallic Metallic
Closure
Caps
AC Voltage
Inlet
3P 4W
125/250V
M4100B12R
—
M4100C12R
BB100N
BB1001W
BB1002W
PC100
4P 5W
3ØY
120/208V
M5100B9R
—
M5100C9R
BB100N
BB1001W
BB1002W
PC100
4P 5W
3ØY
277/480V
M5100B7R
—
M5100C7R
BB100N
BB1001W
BB1002W
PC100
Note: See page Z-17 for corrosion resistant cord sets.
G-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Data Center Pin and Sleeve
IP67
DC Rated Pin and Sleeve Devices
RoHS
SUITABILITY
In today’s environmentally conscious world, energy savings is a pinnacle part of going green.
DC (Direct Current) is being used to reduce power consumption and decrease the amount of
infrastructure needed to energize specific types of data center equipment. Electrical devices
provide a means of connecting DC power.
Hubbell is the first manufacturer to introduce a series of IEC Pin and Sleeve devices
configured for the UL1686 eight o’clock ground position for DC voltage (Disconnecting use
only). Hubbell’s IEC DC rated pin and sleeve line has been qualified by UL to the requirements
of DC voltage. The thermoset polyester contact carrier provide high resistance to electrical
tracking, it withstands higher temperatures for this type of demanding application. The solid
one-piece pins are machined from solid brass for longer life and reliable electrical contact.
In addition, the heavy-duty external cord grips provide maximum cord retention to maintain
VHFXUHWHUPLQDWLRQV)LQDOO\WKHVXSHUWRXJKFRORUFRGHGQRQFRQGXFWLYH9UDWHG9DOR[®
housing is heavy duty for safety and protecting the internal components.
Rating
Amps
30
60
100
Poles
And
Wires
ConÛguration
Recep./
Conn.
Plug
Watertight Devices
DC Voltage
Receptacle
Plug
Connector
2P 3W
550V
HBL330R8WDC
HBL330P8V0DC
HBL330C8V0DC
2P 3W
550V
HBL360R8WDC*
HBL360P8V0DC
HBL360C8V0DC
2P 3W
550V
HBL3100R8WDC
HBL3100P8V0DC
HBL3100C8V0DC
4P 5W
400V
HBL5100R8WDC
HBL5100P8V0DC
HBL5100C8V0DC
Note: *Inlet available - HBL360B8WDC.
IP67
RoHS
SUITABILITY
Dual Certified Pin and Sleeve Devices
Hubbell’s dual certified pin and sleeve devices are ideal for the data center and high tech server industry. They are UL Listed
to UL1682 for the North American market and are TUV Rheinland Certified for the European and International market.
Customers can use the same plug and connector for multiple electrical configurations. They reduce the number of SKU’s
end users have to use if they sell to both domestic and overseas customers. These devices are IP67 rated, RoHs compliant
and showcase all the inherent safety benefits of their V-0 rated Valox® housing and internal components.
Rating
Amps
30/32
60/63
Poles
And
Wires
ConÛguration
Recep./
Conn.
Plug
Watertight Devices
AC Voltage
Receptacle
Plug
Connector
Inlet
3P 4W
380-415V
HBL430R6V02
HBL430P6V02
HBL430C6V02
HBL430B6V02
4P 5W
200/346V
240/415V
HBL530R6V02
HBL530P6V02
HBL530C6V02
HBL530B6V02
3P 4W
380-415V
HBL460R6V02
HBL460P6V02
HBL460C6V02
HBL460B6V02
4P 5W
200/346V
240/415V
HBL560R6V02
HBL560P6V02
HBL560C6V02
HBL560B6V02
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-9
IEC Pin and Sleeve
RoHS
Back Boxes
Back Boxes
Hubbell manufactures an extensive line of back boxes for use with IEC Pin and Sleeve devices. Each
back box is designed to give the user the maximum amount of wiring room while achieving grounding to
metallic conduit. Hubbell back boxes are available in non-metallic and cast metal versions.
Non-Metallic 15º Angle Back Box
Description
BB60N
NPT Hub Size*
Back box for 16, 20, 30 and 32A devices.
1"
Catalog Number
BB2030N
Back box for 60 and 63A devices.
1¼"
BB60N
Back box for 100 and 125A devices.
1½"
BB100N
Note: *Hub is not included; order one of the following Raco® part numbers: 1 in. = 1704, 1¼ in. = 1705, 1½ in. = 1706.
These boxes meets IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
Metallic 15º Angle Back Box**
Description
BB601W
NPT Hub Size
Back box for 16, 20, 30 and 32A devices.
Back box for 60 and 63A devices.
Back box for 100 and 125A devices.
Catalog Number
¾"
BB201W
1"
BB301W
1¼"
BB601W
1½"
BB602W
1½"
BB1001W
2"
BB1002W
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
FW6010055
Metallic 55º Angle Back Box and Adapter**
Description
NPT Hub Size
)HHGWKUXER[EDFNER[DQGDGDSWHUIRUDQG$GHYLFHV
1"
Catalog Number
AB203055
AA203055
Angle adapter only.
Back box and adapter for 60, 63, 100 and 125A devices.
1½"
FW6010055
AA6010055
Angle adapter only.
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
FT202W
Metallic Feed-Thru Back Box**
Description
NPT Hub Size
)HHGWKUXER[IRUDQG$GHYLFHV
Catalog Number
¾"
FT202W
1"
FT302W
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
Metallic Four-Way 15º Angle Back Box**
Description
FW60100
NPT Hub Size
)RXUZD\ER[IRUDQG$GHYLFHV
1½"
Catalog Number
FW60100
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
Straight Wall Box Adapter
Description
Catalog Number
Adapts 16, 20, 30 and 32A Watertight IEC Pin and Sleeve devices to
JDQJGHYLFHER[HVDQG)'ER[HV
HBL2030AP
HBL2030AP
Angle Wall Box Adapter
Description
Catalog Number
Adapts 16, 20, 30 and 32A Watertight IEC Pin and Sleeve devices to
standard wall boxes.
AA2030PS
Note: Adapts 20 and 30A Watertight Pin and Sleeve receptacle to single, 2-gang standard wall box and 4 or 4¹¹⁄₁₆
SXMR
square for non-watertight applications.
AA2030PS
G-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Accessories
Closure Caps
Cap assemblies provide watertight sealing to a disconnected male IEC Pin and Sleeve plug or inlet.
Manufactured of the same tough non-metallic material as the watertight IEC Pin and Sleeve devices
for corrosion and abuse resistance.
Description
Catalog Number
)LWVDOODQG$ZLUHSOXJVDQGLQOHWV
)LWVDOODQG$ZLUHSOXJVDQGLQOHWV
)LWVDOODQG$ZLUHSOXJVDQGLQOHWV
PC320
PC420
PC520
)LWVDOODQG$DQGZLUHSOXJVDQGLQOHWV
)LWVDOODQG$ZLUHSOXJVDQGLQOHWV
PC3430
PC530
)LWVDOODQG$SOXJVDQGLQOHWV
PC60
)LWVDOODQG$SOXJVDQGLQOHWV
PC100
PC3430
Cover Assemblies
Replacement cover assemblies for use with watertight connector bodies and receptacles.
Kit contains cover, arm assembly and installation tool.
Description
Catalog Number
)LWVDOODQG$ZLUHZDWHUWLJKWIHPDOHGHYLFHV
)LWVDOODQG$ZLUHZDWHUWLJKWIHPDOHGHYLFHV
)LWVDOODQG$ZLUHZDWHUWLJKWIHPDOHGHYLFHV
CA320
CA420
CA520
)LWVDOODQG$DQGZLUHZDWHUWLJKWIHPDOHGHYLFHV
)LWVDOODQG$ZLUHZDWHUWLJKWIHPDOHGHYLFHV
CA3430
CA530
)LWVDOODQG$ZDWHUWLJKWIHPDOHGHYLFHV
CA60
)LWVDOODQG$ZDWHUWLJKWIHPDOHGHYLFHV
CA100
CA3430
Cord Clamp and Locking Ring
Replacement cord clamp and locking ring for use with IEC plugs, connectors and inlets.
Description
Cord Clamp and
Locking Ring
Locking Ring Only
)LWVDOODQG$ZLUHSOXJVFRQQHFWRUVDQGLQOHWV
)LWVDOODQG$ZLUHSOXJVFRQQHFWRUVDQGLQOHWV
)LWVDOODQG$ZLUHSOXJVFRQQHFWRUVDQGLQOHWV
CC320
CC420
CC520†
LR320*
LR420*
LR520*
)LWVDOODQG$DQGZLUHSOXJVFRQQHFWRUVDQGLQOHWV
)LWVDOODQG$ZLUHSOXJVFRQQHFWRUVDQGLQOHWV
CC3430
CC530†
LR3430*
LR530*
)LWVDOODQG$SOXJVFRQQHFWRUVDQGLQOHWV
CC60
LR60*
)LWVDOODQG$SOXJVFRQQHFWRUVDQGLQOHWV
CC100
LR100*
CC3430
LR3430
Note: *Locking Ring only for plugs and inlets.
†Consult factory.
Liquidtight Adapters
Machined aluminum adapters are available to provide a means for attaching flexible liquidtight metal
conduit to rear of a Hubbell Pin and Sleeve plug or connector. To install, remove cord grip and two gland
cap screws. Use screws to attach adapter. Kellems® liquidtight conduit connectors are available to control
arc of bend and to prevent conduit pull-out where vibration, motion or strain is present. These grips
interface directly with Hubbell’s liquidtight adapters and are available in a wide variety of NPT sizes and
configurations. Consult your local code grounding requirements before using liquidtight adapters.
Rating of Hubbell
Pin and Sleeve Device
Liquidtight
Conduit Size
Hubbell Liquidtight
Adapter
Optional Kellems
Liquidtight Conduit Grip
16 and 20 Amp
3 and 4 Wire
½" NPT
SAA12
074093402
¾" NPT
SAA34
074093403
16 and 20 Amp 5 wire
and 30 and 32 Amp
3 and 4 wire
½" NPT
SAB12
074093402
¾" NPT
SAB34
074093403
1" NPT
SAB100
074093404
30 and 32 Amp 5 wire
¾" NPT
SAC34
074093403
30 and 32 Amp 5 wire
and 60 and 63 Amp (all)
1" NPT
SAC100
074093404
1¼" NPT
SAC125
074093405
100 and 125 Amp (all)
1¼" NPT
SAD125
074093405
1½" NPT
SAD150
074093406
www.hubbell-wiring.com
®
Wiring Device-Kellems
SAB34
074093403
G-11
IEC Pin and Sleeve
Dimensions
Plug
Plug Dimensions
Type
B
A
Short Housing Plug
B
A
B
Cord Grip Range
HBL320P
6.61" (167.8)
2.87" (73.0)
.330"-.830" (8.4-21.1)
HBL420P
7.00" (177.8)
3.19" (81.0)
.330"-.830" (8.4-21.1)
HBL520P
7.65" (194.3)
3.50" (89.0)
HBL330P
8.05" (204.5) 3.74" (95.0)
.375"-1.250" (9.5-31.8)
HBL430P
8.05" (204.5) 3.74" (95.0)
.375"-1.250" (9.5-31.8)
HBL530P
8.54" (216.9) 4.02" (102.0) .500"-1.450" (12.7-36.8)
HBL360P, HBL460P, HBL560P
10.15" (257.8) 4.49" (114.0)
.500"-1.450" (12.7-36.8)
HBL3100P, HBL4100P, M4100P,
HBL5100P, M5100P
12.63" (320.8) 4.92" (125.0)
1.065"-1.940" (27.1-49.3)
.330"-.830" (8.4-21.1)
Short Housing Plug Dimensions
Type
A
A
HBL5100P9WSH
Connector Body
B
Cord Grip Range
8.30" (210.82) 4.92" (125.0)
1.065"-1.940" (27.1-49.3)
Connector Body Dimensions
Type
B
A
Inlet
B
D
A
B
Cord Grip Range
HBL320C
7.49" (190.3)
3.33" (84.6)
.330"-.830" (8.4-21.1)
HBL420C
7.90" (200.6) 3.66" (93.0)
.330"-.830" (8.4-21.1)
HBL520C
8.54" (216.9) 3.94" (100.0) .330"-.830" (8.4-21.1)
HBL330C
9.05" (229.9) 4.27" (108.5) .375"-1.250" (9.5-31.8)
HBL430C
9.05" (229.9) 4.27" (108.5) .375"-1.250" (9.5-31.8)
HBL530C
9.68" (245.8) 4.70" (119.5)
HBL360C, HBL460C, HBL560C
11.15" (283.2) 5.10" (129.5)
.500"-1.450" (12.7-36.8)
HBL3100C, HBL4100C, M4100C,
HBL5100C, M5100C
13.57" (344.7) 5.71" (145)
1.065"-1.940" (27.1-49.3)
.500"-1.450" (12.7-36.8)
Inlet Dimensions
A
Type
C
E
F
⁷⁄₃₂" (5.5) Dia. (4 Holes)
Receptacle
A
B
C
D
E
F
HBL320B
2.54" (64.5)
1.85" (47.0)
1.14" (29.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL420B
2.54" (64.5)
2.11" (53.6)
1.14" (29.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL520B
2.54" (64.5)
2.41" (61.2)
1.14" (29.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL330B
2.99" (76.0)
2.49" (63.2)
1.04" (26.5)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL430B
2.99" (76.0)
2.49" (63.2)
1.04" (26.5)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL530B
2.99" (76.0)
2.75" (69.9)
1.04" (26.5)
2.80" (71.0)
3.75" (95.3)
3.13" (79.5)
HBL360B,
4.04" (102.6)
HBL460B, HBL560B
2.97" (75.5)
1.18" (30.0)
3.46" (88.0)
4.50" (114.3)
3.88" (98.5)
HBL3100B,
4.53" (115)
HBL4100B, M4100B,
HBL5100B, M5100B
3.44" (87.5)
1.95" (49.5)
3.94" (100.0) 5.50" (139.7) 4.88" (124.0)
Receptacle Dimensions
A
D
B
E
F
⁷⁄₃₂" (5.5) Dia. (4 Holes)
Type
A
B
C
D
E
F
HBL320R
3.33" (84.5)
2.78" (70.6)
1.02" (26.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL420R
3.66" (93.0)
2.78" (70.6)
1.02" (26.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
C HBL520R
HBL330R
3.94" (100.0) 2.78" (70.6)
1.02" (26.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
4.27" (108.5) 3.09" (78.5)
1.16" (29.5)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL430R
4.27" (108.5) 3.09" (78.5)
1.16" (29.5)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL530R
4.70" (119.4)
3.09" (78.5)
1.16" (29.5)
2.83" (71.9)
3.75" (95.3)
3.13" (79.5)
HBL360R,
5.10" (129.5)
HBL460R, HBL560R
4.07" (103.4)
1.69" (43.0)
3.46" (88.0)
4.50" (114.3)
3.88" (98.6)
HBL3100R,
5.71" (145)
HBL4100R, M4100R,
HBL5100R, M5100R
4.23" (107.4)
2.46" (62.5)
3.95" (100.3) 5.50" (139.7) 4.88" (123.9)
Note: 20, 30, 60 and 100A devices are dimensionally equivalent to 16, 32, 63 and 125A devices, respectively.
Dimensions in Inches (mm)
G-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Dimensions
Non-Metallic 15º Angle Back Box
E
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
1"
5.67"
(144.0)
4.44"
(112.8)
4.05"
(102.9)
3.91"
(99.3)
2.35"
(59.7)
4.92"
(125.0)
30.00"
BB2030N
Back box for 60
& 63A devices.
1¼" 7.76"
(197.0)
5.16"
(131.0)
5.87"
(149.0)
4.72"
(120.0)
2.99"
(76.0)
6.94"
(176.0)
70.00"
BB60N
Back box for 100
& 125A devices.
1½" 8.21"
6.23"
(209.0) (158.0)
6.31"
(160.3)
5.71"
(145.0)
3.99"
(101.0)
7.41"
(188.0)
120.00"
BB100N
Description
Back box for 16, 20,
30 & 32A devices.
F
C
A
15°
B
D
Non-Metallic Angle Box
Note: *Hub is not included; order one of the following Raco® part numbers: 1 inch = 1704, 1¼ inch = 1705, 1½ inch = 1706.
These boxes meet IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
Metallic 15º Angle Back Box
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
E
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
Back box for 16, 20,
30 & 32A devices.
¾"
5.12"
(130.2)
4.00"
(101.6)
4.19"
(106.4)
3.75"
(95.3)
3.00"
(76.2)
4.00"
(101.6)
30.00"
BB201W
Back box for 16, 20,
30 & 32A devices.
1"
5.12"
(130.2)
4.00"
(101.6)
4.19"
(106.4)
3.75"
(95.3)
3.00"
(76.2)
4.00"
(101.6)
30.00"
BB301W
Back box for 60
& 63A devices.
1¼" 7.25"
(184.2)
5.25"
(133.4)
6.00"
(152.4)
4.50"
(114.3)
3.75"
(95.3)
6.19"
(157.2)
80.00"
BB601W
Back box for 60
& 63A devices.
1½" 7.25"
(184.2)
5.25"
(133.4)
6.00"
(152.4)
4.50"
(114.3)
3.75"
(95.3)
6.19"
(157.2)
80.00"
BB602W
Back box for 100
&125A devices.
1½" 8.12"
6.75"
(206.4) (171.5)
6.88"
(174.6)
5.50"
(139.7)
4.75"
(120.7)
6.94"
(176.2)
130.00"
BB1001W
6.88"
(174.6)
5.50"
(139.7)
4.75"
(120.7)
6.94"
(176.2)
130.00"
BB1002W
Back box for 100
& 125A devices.
2"
8.12"
6.75"
(206.4) (171.5)
Metallic 55º Angle Back Box and Adapter
Description
NPT
Hub
Size
)HHGWKUXER[DQG
angle adapter for 16,
20, 30 & 32A devices.
1"
Angle adapter for 16,
20, 30 & 32A devices.
–
Back box and angle
adapter for 60, 63,
100 & 125A devices.
Angle adapter for 60,
63, 100 & 125A devices.
–
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
6.80"
(172.4)
6.60"
(167.0)
5.63"
(142.9)
4.50"
(114.3)
3.74"
(95.0)
–
4.89"
(124.3)
3.33"
(84.6)
4.29"
(109.0)
3.75"
(95.2)
2.50"
(63.5)
–
25.00"
AA203055
8.00"
7.75"
(202.9) (196.8)
6.90"
(174.8)
6.00"
(152.4)
–
100.00"
FW6010055
4.48"
(113.7)
6.00"
(152.4)
6.75"
(171.4)
6.00"
(152.4)
–
79.00"
AA6010055
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
6.75"
(171.4)
C
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
42.27"
F
15°
B
D
Metallic 15º Angle Box
E
B
C
A
A
Inch
(mm)
1½" 8.50"
(215.9)
A
55°
Catalog
Number
41
Description
NPT
Hub
Size
AB203055
D
Metallic 55º Angle Box
E
48 CU. IN.
C
A
F
Metallic Feed-Thru Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
)HHGWKUXER[IRU
20, 30 & 32A devices.
¾"
8.25"
3.06"
(209.6) (77.8)
7.14"
(181.4)
4.50"
(114.3)
3.75"
(95.3)
3.13"
(79.5)
48.00"
FT202W
)HHGWKUXER[IRU
20, 30 & 32A devices.
1"
8.25"
3.06"
(209.6) (77.8)
7.14"
(181.4)
4.50"
(114.3)
3.75"
(95.3)
3.13"
(79.5)
48.00"
FT302W
B
D
E
B
Metallic Four-Way 15º Angle Back Box
A
Inch
(mm)
D
Metallic Feed-Thru Box
Description
NPT
Hub
Size
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
)RXUZD\ER[IRU
63, 100 & 125A devices.
1½" 8.75"
9.75"
(222.3) (247.7)
7.75"
(196.9)
6.75"
(171.5)
6.00"
(152.4)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
–
210.00"
FW60100
Note: These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
These boxes withstand a 500-hour salt spray test as well as UL rain tight and external icing test.
A
C
Metallic Four-Way Angle Box
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-13
IEC Pin and Sleeve
Listings and Specifications
IEC Pin and Sleeve Inlet, Connector Body, Plug and Receptacle
Watertight Materials
Part
Material
Inlet
Housing
Locking Ring
0RXQWLQJ)ODQJH
Mounting Screws
Contact Carrier
Retainer
Ground, Phase Pins
Terminal Screws
Assembly Screws (2)
Gaskets
Zytel® 101 Nylon*
Reinforced Thermoplastic Polyester
Zytel® 101 Nylon
Stainless Steel (300 Series)
High-Impact Thermoset
High-Impact Thermoset
Brass (M-Series - Nickel-plated brass)
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Solid Neoprene
Connector Body
Housing
Cord Clamps
Glands
Cover Arms
Arm Springs
Covers
Cover Screw
Rotating Sealing Disc
Gaskets
Contact Carrier
Retainer
Phase, Ground Sleeves
Sleeve Spring
Terminal Screws
Assembly Screws
Zytel® ST801 Nylon
Reinforced Thermoplastic Polyester
Solid Neoprene
Reinforced Thermoplastic Polyester
Stainless Steel (17-7 type)
Reinforced Thermoplastic Polyester
Nickel-plated brass
Polycarbonate
Solid Neoprene
High-Impact Thermoset
High-Impact Thermoset
Brass
20A and 30A Stainless Steel (300 Series); others are Beryllium Copper
multi-contact inserts with silver plating
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Listed to standard UL1682/CSA C22.2
No. 182.1-02, Plugs, Receptacles and
cable connectors of the Pin and Sleeve
Type.
UL Classified to IEC Standards 603093OXJV6RFNHW2XWOHWVDQG&RXSOHUV
for Industrial Purposes) for Series I
(European) rated voltages and services.
When used with cord, these devices
require no further investigation by UL
for equipment Classification to IEC 435
or IEC 380.
Plug
Housing
Locking Ring
Sealing Gasket
Cord Clamp
Gland Cap
Gland
Cord Clamp Screws
Clamp Nut
Gland Clamp Screws
Contact Carrier
Retainer
Ground, Phase Pins
Terminal Screws
Assembly Screws
Zytel® ST801 Nylon
Reinforced Thermoplastic Polyester
Solid Neoprene
Reinforced Thermoplastic Polyester
Reinforced Thermoplastic Polyester
Solid Neoprene
Stainless Steel (300 Series)
Nickel-Plated Brass
Stainless Steel (300 Series)
High-Impact Thermoset
High-Impact Thermoset
Brass (M-Series - Nickel-plated brass)
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Receptacle
Housing
0RXQWLQJ)ODQJH
Arm Spring
Cover Arm
Cover
Cover Screw
Rotating Sealing Disc
Gaskets
Mounting Screws
Terminal Screws
Phase, Ground Sleeves
Sleeve Spring
Zytel® 101 Nylon
Zytel® 101 Nylon
Stainless Steel (17-7 type)
Reinforced Thermoplastic Polyester
Reinforced Thermoplastic Polyester
Nickel-plated brass
Polycarbonate
Solid Neoprene
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Brass
20A and 30A Stainless Steel (300 Series); others are Beryllium Copper multi-contact inserts with silver plating
Specifications
Typical Specification
Manufacturer’s Identification
Description
Type
Rating
Configuration
Certification
Hubbell HBL520P9W
Plug, Power Supply
3 Pole + Neutral + Earth
20A, 120/208V AC, 3 Phase WYE
UL 1686 C2, IEC 60309-2, Clock Position 9, Watertight
8//LVWHG)LOH(5HFHSWDFOHVDQG,QOHWV(3OXJVDQG&RQQHFWRUV
8/6WDQGDUG8/DQG8/&&6$&HUWLILHG)LOH/5&IRU Plugs,
Connectors Inlets and LR285C for Receptacle CSA StandardC22.2 No. 182.1,
UL Classified to IEC 60309-1 IEC 60309-2
Note: *All devices on page G-9 have Valox® housings.
® Zytel is registered trademark of E.I. DuPont.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
G-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Specifications and Horsepower Ratings
Performance
Electrical
Dielectric Withstand Voltage
Max. Working Voltage
3000V AC.
600V RMS (i.e., minimum creepage distance 10 millimeters, minimum clearance 8 millimeters, per IEC 60309-1
for devices rated over 500V).
Certified for current interrupting at full rated current (Except DC rated devices).
Max. 30°C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power
factor of 75%.
5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles without
load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles without load for 100A and 125A.
Current Interrupting
Temperature Rise
Endurance
Mechanical
Impact Resistance
Cord Grip Cable Retention
Cord Accommodation
Per CSA C22.2 No. 182.1 / UL1682.
Per CSA C22.2 No. 182.1 / UL1682.
Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62,
CSA C22.2 No. 49 and the harmonized <HAR> European Standards.
Terminals identified in accordance with North American and IEC conventions.
Identification and ratings are a permanent part of the device housing.
Terminal Identification
Product Identification
Environmental
Moisture Resistance
Ingress Protection
)ODPPDELOLW\
2SHUDWLQJ7HPSHUDWXUHV
Watertight per IEC 60309-1.
IP67 Suitability.
HB or better per UL 94 or CSA C22.2 No. 0.17.
Maximum Continuous 75°C; Minimum - 40°C without impact.
Materials
Housings
$OO2WKHU0DWHULDOV
Nylon.
Resistant to corrosion and chemical attack.
Note: Specification sheets for all other Pin and Sleeve catalog numbers are available upon request.
Horsepower Ratings for IEC Pin and Sleeve
AC Voltage Rating
Horsepower
Catalog Number
3Ø 250
2
HBL420R9W
HBL420P9W
HBL420C9W
HBL420B9W
3Ø 480
5
HBL420R7W
HBL420P7W
HBL420C7W
HBL420B7W
3Ø 600
7.5
HBL420R5W
HBL420P5W
HBL420C5W
HBL420B5W
3ØY 120/208
.5
HBL520R9W
HBL520P9W
HBL520C9W
HBL520B9W
3ØY 277/480
5
HBL520R7W
HBL520P7W
HBL520C7W
HBL520B7W
3ØY 347/600
7.5
HBL520R5W
HBL520P5W
HBL520C5W
HBL520B5W
3Ø 250
3
HBL430R9W
HBL430P9W
HBL430C9W
HBL430B9W
3Ø 480
7.5
HBL430R7W
HBL430P7W
HBL430C7W
HBL430B7W
3Ø 600
10
HBL430R5W
HBL430P5W
HBL430C5W
HBL430B5W
3ØY 120/208
2
HBL530R9W
HBL530P9W
HBL530C9W
HBL530B9W
3ØY 277/480
7.5
HBL530R7W
HBL530P7W
HBL530C7W
HBL530B7W
3ØY 347/600
10
HBL530R5W
HBL530P5W
HBL530C5W
HBL530B5W
3Ø 250
5
HBL460R9W
HBL460P9W
HBL460C9W
HBL460B9W
3Ø 480
10
HBL460R7W
HBL460P7W
HBL460C7W
HBL460B7W
3Ø 600
15
HBL460R5W
HBL460P5W
HBL460C5W
HBL460B5W
3ØY 120/208
3
HBL560R9W
HBL560P9W
HBL560C9W
HBL560B9W
3ØY 277/480
10
HBL560R7W
HBL560P7W
HBL560C7W
HBL560B7W
3ØY 347/600
15
HBL560R5W
HBL560P5W
HBL560C5W
HBL560B5W
3Ø 250
10
HBL4100R9W
HBL4100P9W
HBL4100C9W
HBL4100B9W
3Ø 480
30
HBL4100R7W
HBL4100P7W
HBL4100C7W
HBL4100B7W
3Ø 600
30
HBL4100R5W
HBL4100P5W
HBL4100C5W
HBL4100B5W
3ØY 120/208
10
HBL5100R9W
HBL5100P9W
HBL5100C9W
HBL5100B9W
3ØY 277/480
30
HBL5100R7W
HBL5100P7W
HBL5100C7W
HBL5100B7W
3ØY 347/600
30
HBL5100R5W
HBL5100P5W
HBL5100C5W
HBL5100B5W
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-15
IEC Pin and Sleeve
Unfused Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Features and Benefits
Large gears enclosed in a
gear box assembled on one
plane to eliminate possible
gear jumping
Color coded rating pad
and receptacle mount to
signify voltage
Lockable handle to
PHHW26+$/RFNRXW
Tagout regulations
Two-stage interlocking
mechanism to help
defeat tampering
Pre-wired IEC Pin and
Sleeve receptacle
Watertight conduit hub
and grounding plate for
use on metallic conduit
(IP67 suitability)
Replaceable spring-loaded
liftcover with gasket for a
watertight seal
Solid pins—dependable
solid brass for longer
life and reliable
electrical contact
Captured neoprene
gasket for a
watertight seal
Horsepower rated
disconnect switch
handles large
motor loads
DIN rail mounted
switch for easy
installation and
replacement
HBL430MI7W
Enclosure housing with
brass inserts and stainless
steel screws for higher
torque and better sealing
Adjustable mounting
feet are ductile to
allow mounting on
irregular surfaces
Three molded-in
conduit drill points
are located on top,
bottom and back
surface of enclosure
HBL430MI7WR
(Reverse Service)
Hubbell Circuit-Lock® Mechanical Interlocks
The National Electrical Code (NEC®) requires a separate
disconnect means within sight of all motor loads. The NEC
requires the disconnecting means in a motor-circuit be
listed as “Suitable as Motor Disconnect” if the motor is
rated greater than 2 HP.
Hubbell’s revolutionary Circuit-Lock interlock incorporates
the disconnect switch and receptacle in one compact,
non-metallic and economical unit. Removing the plug and
locking it out provides a visual means of verifying equipment
has been disconnected. All Circuit-Lock mechanical
interlocks can be locked out as a method of compliance
ZLWKWKH26+$/RFNRXW7DJRXWUHJXODWLRQ
7KHVZLWFKFDQQRWEHWXUQHG21XQWLOWKHSOXJLVFRPSOHWHO\
engaged, and the plug cannot be removed until the switch
LVWXUQHG2))$WWKHVDPHWLPHLWHOLPLQDWHVWKHSRVVLELOLW\
of making or breaking the circuit under load or making a
casual or “lazy” connection. The non-metallic enclosure can
be connected to the metallic conduit and not interfere with
the ground continuity.
In addition, these horsepower rated units are durable,
watertight and easy to install. And they are compatible with
IEC 60309-2 plugs.
These Circuit-Lock units are available in 20, 30, 60 and
100A models, and in 3, 4 and 5 wire configurations that are
designed to the IEC 60309-1 and 60309-2 standards.
Hubbell’s Circuit-Lock Mechanical Interlocks are also
available in “Reverse Service” versions. These units
incorporate the disconnect switch and reverse service
receptacle (inlet) in one compact, non-metallic and
economical unit. These units are available in 30, 60 and
100A models, 4 wire configurations.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
G-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Unfused Circuit-Lock® Devices
20, 30, 60 and 100 Ampere – North American Ratings, 32 Ampere – International Rating
IP67
Enclosure Type 4X, 12
SUITABILITY
Unfused Circuit-Lock® Devices
Rating
Reverse Service
Amps
Poles
and
Wires
20
3P 4W
120/240V
HBL420MI12W
HBL420P12W
—
—
3P 4W
3Ø 240V
HBL420MI9W
HBL420P9W
—
—
3P 4W
3Ø 480V
HBL420MI7W
HBL420P7W
—
—
3P 4W
3Ø 600V
HBL420MI5W
HBL420P5W
—
—
2P 3W
120V
HBL330MI4W
HBL330P4W
—
—
2P 3W
240V
HBL330MI6W
HBL330P6W
—
—
2P 3W
480V
HBL330MI7W
HBL330P7W
—
—
3P 4W
120/240V
HBL430MI12W
HBL430P12W
—
—
3P 4W
3Ø 240V
HBL430MI9W
HBL430P9W
HBL430MI9WR
HBL430P9WR
3P 4W
3Ø 480V
HBL430MI7W
HBL430P7W
HBL430MI7WR
HBL430P7WR
3P 4W
3Ø 600V
HBL430MI5W
HBL430P5W
HBL430MI5WR
HBL430P5WR
4P 5W
3ØY 120/208V
HBL530MI9W
HBL530P9W
—
—
4P 5W
3ØY 277/480V
HBL530MI7W
HBL530P7W
—
—
4P 5W
3ØY 347/600V
HBL530MI5W
HBL530P5W
—
—
32
3P 4W
380V 50HZ440V 60Hz
HBL432MI3W
HBL432P3W
—
—
60
2P 3W
120V
HBL360MI4W
HBL360P4W
—
—
2P 3W
240V
HBL360MI6W
HBL360P6W
—
—
2P 3W
480V
HBL360MI7W
HBL360P7W
—
—
3P 4W
120/240V
HBL460MI12W
HBL460P12W
HBL460MI12WR
HBL460P12WR
3P 4W
3Ø 240V
HBL460MI9W
HBL460P9W
HBL460MI9WR
HBL460P9WR
3P 4W
3Ø 480V
HBL460MI7W
HBL460P7W
HBL460MI7WR
HBL460P7WR
3P 4W
3Ø 600V
HBL460MI5W
HBL460P5W
HBL460MI5WR
HBL460P5WR
4P 5W
3ØY 120/208V
HBL560MI9W
HBL560P9W
—
—
4P 5W
3ØY 277/480V
HBL560MI7W
HBL560P7W
—
—
4P 5W
3ØY 347/600V
HBL560MI5W
HBL560P5W
—
—
2P 3W
240V
HBL3100MI6W
HBL3100P6W
—
—
3P 4W
120/240V
HBL4100MI12W
HBL4100P12W
HBL4100MI12WR
HBL4100P12WR
3P 4W
3Ø 240V
HBL4100MI9W
HBL4100P9W
HBL4100MI9WR
HBL4100P9WR
3P 4W
3Ø 480V
HBL4100MI7W
HBL4100P7W
HBL4100MI7WR
HBL4100P7WR
3P 4W
3Ø 600V
HBL4100MI5W
HBL4100P5W
HBL4100MI5WR
HBL4100P5WR
4P 5W
3ØY 120/208V
HBL5100MI9W
HBL5100P9W
30
100
Configuration
Recep.
Plug
AC Voltage
Mechanical Interlock
Mating Plug
Mechanical Interlock
—
Mating Plug
—
Note: 20, 30 and 32A – 1 inch NPT hub supplied; 60 and 100A – 1¼ inch hub supplied.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-17
IEC Pin and Sleeve
Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Accessories and Dimensions
Auxiliary Contacts for 20, 30, 32, 60 and 100A Switch, NEMA A600 Pilot Duty
Description
Catalog Number
“Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC1
HBLAC2
Ground Block
HBLAC1
Description
Catalog Number
)RUDQG$VZLWFKHV
)RUDQG$VZLWFKHV
HBL30RGB
HBL60100RGB
Neutral Block
HBLAC2
Description
Catalog Number
)RUDQG$VZLWFKHV
)RU$VZLWFKHV
)RU$VZLWFKHV
HBL30RNB
HBL60RNB
HBL100RNB
Watertight Closure Plug Kits
Description
Catalog Number
)RUDQG$&LUFXLW/RFN8QIXVHGDQG)XVHG3LQDQG6OHHYHPHFKDQLFDOLQWHUORFNV
)RUDQG$&LUFXLW/RFN8QIXVHGDQG)XVHG3LQDQG6OHHYHPHFKDQLFDOLQWHUORFNV
MICPK30
MICPK60
Replacement Flip Covers
HBL30RNB
HBL30RGB
Description
Catalog Number
)RU$PHFKDQLFDOLQWHUORFNV
)RUDQG$DQGZLUHPHFKDQLFDOLQWHUORFNV
)RU$ZLUHPHFKDQLFDOLQWHUORFNV
)RU$PHFKDQLFDOLQWHUORFNV
)RU$PHFKDQLFDOLQWHUORFNV
CA420MI
CA3430MI
CA530MI
CA60MI
CA100MI
Replacement Switches
Description
Catalog Number
)RU$PHFKDQLFDOLQWHUORFNV
)RUDQG$PHFKDQLFDOLQWHUORFNV
)RUDQG$PHFKDQLFDOLQWHUORFNV
HBLDS3RS
HBL30MIRS
HBLDS60100RS
Replacement Mounting Feet
MICPK30
Description
Catalog Number
)RUDQG$PHFKDQLFDOLQWHUORFNV
HBLRFT2*
Dimensions
20A and 30A
Inches (mm)
KEY
CA3430MI
HBL30MIRS
A
B
C
D
E
)
G
H
I
J
K
L
M
HUB SIZE
7.75" (196.9)
6.87" (174.5)
4.75" (120.7)
1.02" (25.9)
1.60" (40.6)
11.00" (279.4)
8.75" (222.3)
8.00" (203.2)
10.12" (257.0)
6.88" (174.8)
1.93" (49.0)
11.25" (285.8)**
7.75" (196.9)
1.00" NPT
60A
Inches (mm)
100A
Inches (mm)
7.75" (196.9)
6.87" (174.5)
4.75" (120.7)
1.02" (25.9)
1.46" (37.1)
12.75" (323.9)
8.75" (222.3)
9.75" (247.7)
11.87" (301.5)
6.88" (174.8)
2.09" (53.1)
13.65" (346.7)
8.60" (218.4)
1.25" NPT
7.75" (196.9)
6.87" (174.5)
4.75" (120.7)
1.02" (25.9)
1.46" (37.1)
12.75" (323.9)
8.75" (222.3)
9.75" (247.7)
11.87" (301.5)
6.88" (174.8)
2.09" (53.1)
13.65" (346.7)
9.30" (236.2)
1.25" NPT
Note: *Package of 10 feet and 10 screws.
**30 and 32A, 3 and 4W = 11.50" (292.1);
30A, 5W = 11.59" (294.4).
A
B
C
D
E
J
F
K
H
L
I
HBLRFT2
G
Dimensions in Inches (mm)
G-18
®
Wiring Device-Kellems
M
www.hubbell-wiring.com
IEC Pin and Sleeve
Unfused Circuit-Lock®
Specifications and Horsepower Ratings
Typical Specifications
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type
Ingress Protection
Enclosure Material
Certification
Hubbell HBL430MI7W
Circuit-Lock® Pin and Sleeve Mechanical Interlock
3 Pole + Earth
30A, 480V AC, 3 Phase
IEC 60309-2, UL1686 C2, Clock position 7
2XWGRRU;:DWHUWLJKW:DVKGRZQ,QGRRU'XVWWLJKW)DOOLQJ'LUWDQG1RQFRUURVLYH/LTXLGV
IP67 Suitability
Non-metallic, enclosure suitable for metallic conduit
UL Listed, CSA Certified
Note: This device provides on/off switched control of a plug connected load and includes an interlocking feature to prevent the plug from being disconnected while the
receptacle is energized. The switch cannot be turned “ON" until the plug is inserted properly, and the plug cannot be removed until the switch is turned “OFF."
Materials
Part
Material
Part
Material
Base
Handle
Enclosure Gasket
Shaft Seal
Enclosure Screws
Hinge Pins
Valox®
Valox®
Neoprene
Neoprene
Stainless Steel 300 Series
Nickel Plated Brass
Top
Conduit Hub
Shaft
Ground Plate
Enclosure Inserts
Hinge Spring
Valox®
Zinc
Valox®
Galvanized Steel
Brass
Stainless Steel 300 Series
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating
2SHUDWLRQV
Withstands 3,000V AC Min.
600V AC RMS.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 10,000 RMS symmetrical amperes at the voltage rating of the
receptacle. 20A and 30A models: Suitable for use on a circuit capable of delivering not more than 65,000 RMS symmetrical
amperes, 600V when protected by class “J” fuses rated 30A.
Mechanical 10,000 cycles, electrical 6,000 cycles.
Mechanical
Impact Resistance
Terminal Identification
Product Identification
Mounting
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of the external label and molded into the receptacle mount.
External adjustable feet.
Environmental
Moisture Resistance
Ingress Protection
)ODPPDELOLW\
2SHUDWLQJ7HPSHUDWXUH
UV Resistance
2XWGRRU;:DWHUWLJKW:DVKGRZQ,QGRRU'XVWWLJKW)DOOLQJ'LUWDQG1RQFRUURVLYH/LTXLGV
IP67 Suitability.
UL94-5VA and V-0 Classification.
Max. Continuous +75°C; Min. Continuous -40°C.
All materials are UV stabilized.
Horsepower Ratings
Amps
AC Voltage Rating
Horsepower
Mechanical Interlock
Mating Plug
20
20
20
20
30
30
30
30
30
30
30
30
30
30
32
60
60
60
60
60
60
60
60
60
60
100
100
100
100
100
100
120/240V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
120V AC
240V AC
480V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
3ØY 347/600V AC
3ØY 277/480V AC
3ØY 120/208V AC
380V AC 50Hz – 440V AC 60Hz
120V AC
240V AC
480V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
3ØY 347/600V AC
3ØY 277/480V AC
3ØY 120/208V AC
240V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
3ØY 120/208V AC
2
5
5
10
2
3 (208-240V AC)
7.5
3 (208-240V AC)
20
15
7.5
20
15
5
15 (440V AC 3Ø 60Hz)
3
7.5 (208-240V AC)
20
7.5 (208-240V AC)
40
30
15
40
30
15
15 (10 @ 208V AC)
15
50
50
25 (208-240V AC)
20
HBL420MI12W
HBL420MI9W
HBL420MI7W
HBL420MI5W
HBL330MI4W
HBL330MI6W
HBL330MI7W
HBL430MI12W
HBL430MI5W
HBL430MI7W
HBL430MI9W
HBL530MI5W
HBL530MI7W
HBL530MI9W
HBL432MI3W
HBL360MI4W
HBL360MI6W
HBL360MI7W
HBL460MI12W
HBL460MI5W
HBL460MI7W
HBL460MI9W
HBL560MI5W
HBL560MI7W
HBL560MI9W
HBL3100MI6W
HBL4100MI12W
HBL4100MI5W
HBL4100MI7W
HBL4100MI9W
HBL5100MI9W
HBL420P12W
HBL420P9W
HBL420P7W
HBL420P5W
HBL330P4W
HBL330P6W
HBL330P7W
HBL430P12W
HBL430P5W
HBL430P7W
HBL430P9W
HBL530P5W
HBL530P7W
HBL530P9W
HBL432P3W
HBL360P4W
HBL360P6W
HBL360P7W
HBL460P12W
HBL460P5W
HBL460P7W
HBL460P9W
HBL560P5W
HBL560P7W
HBL560P9W
HBL3100P6W
HBL4100P12W
HBL4100P5W
HBL4100P7W
HBL4100P9W
HBL5100P9W
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-19
IEC Pin and Sleeve
Fused Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Features and Benefits
Non-metallic enclosure meets UL 50E Type 4X
(watertight), 12 (dust-tight) and IP66 suitability
requirements. Enclosure is molded of rugged
thermoplastic Valox® to resist abuse, corrosion
and enhance safety. All external hardware is
stainless steel
Three molded-in conduit drill points
are located on the top, bottom, and
back surface of enclosure. Conduit
hub provided: 30A 1 inch NPT,
60A 1¼ inch NPT
Adjustable mounting feet (4)
can be mounted in any 1 of 3
positions for ease of installation
The patented Plug-Check™
mechanism detects the presence
of the plug. It operates as a
clutch to engage the handle with
the switch and captures the plug.
This action prevents the plug
from being removed until the
switch is turned OFF
High visibility red handle can be
locked in the OFF position as
a method of compliance with
OSHA lockout requirements.
Accepts up to a ⁵⁄₁₆ inch
padlock shackle
Removable door
for ease of wiring
and installation
Replaceable spring-loaded receptacle
liftcover with gasket ensures dust tight
rating; liftcover provides watertight seal
when turned and locked
Compact Fused Disconnect
Switch accepts Class “J” fuses.
Fuse holders are top mounted for
easy access. The switch accepts
auxiliary contacts for control circuit
applications including the ON/OFF
control of remote pilot lights or
signal for programmable controllers.
HBL460MIF5W
Thermoset polyester contact
carrier provides resistance
to electrical tracking and
withstands higher temperatures.
Thermoset properties provide
excellent dimensional stability,
low moisture absorption, and
superior dielectric strength.
Conduit hub and mounting feet are supplied
with each IEC Mechanical Interlock
Stainless steel ¼ inch
turn door fasteners
for quick, easy
access to fuses.
Enclosure door can
be locked to prevent
unauthorized access.
Additionally, if the switch
is ON, the door can not
be opened.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
G-20
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Fused Circuit-Lock® Devices and Accessories
30 and 60 Ampere – North American Ratings
Enclosure Type 4X, 12
IP66
SUITABILITY
Fused Circuit-Lock® Devices
Rating
Amps
Poles
and
Wires
30
60
Configuration
Recep./
Plug/
Conn.
Inlet
AC Voltage
Mechanical Interlock
Mating Plug
3P 4W
120/240V
HBL430MIF12W
HBL430P12W
3P 4W
3Ø 240V
HBL430MIF9W
HBL430P9W
3P 4W
3Ø 480V
HBL430MIF7W
HBL430P7W
3P 4W
3Ø 600V
HBL430MIF5W
HBL430P5W
4P 5W
3ØY 277/480V
HBL530MIF7W
HBL530P7W
4P 5W
3ØY 347/600V
HBL530MIF5W
HBL530P5W
3P 4W
120/240V
HBL460MIF12W
HBL460P12W
3P 4W
3Ø 240V
HBL460MIF9W
HBL460P9W
3P 4W
3Ø 480V
HBL460MIF7W
HBL460P7W
3P 4W
3Ø 600V
HBL460MIF5W
HBL460P5W
4P 5W
3ØY 120/208V
HBL560MIF9W
HBL560P9W
Gray Style Switch
HBLACFSNO
HBL30MIFRS
Black Style Switch
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
Replacement Auxiliary Contacts
ACFSNO
Description
Black Style Switch
Catalog Number
Gray Style Switch
Catalog Number
Auxiliary contact, normally open, A600 pilot duty, break before break.
ACFSNO
HBLACFSNO
Auxiliary contact, normally closed, A600 pilot duty, break before break.
ACFSNC
HBLACFSNC
30MIFRS
Note: Auxiliary contacts are specific to the style switch noted and are NOT interchangeble.
Replacement Switches
Description
Black Style Switch
Catalog Number
Gray Style Switch
Catalog Number
)RU$IXVHGVZLWFKHV
30MIFRS
HBL30MIFRS
—
HBL60MIFRS
)RU$IXVHGVZLWFKHV*UD\6W\OHVZLWFKZLOOUHWURILW%ODFN6W\OHVZLWFK
MICPK30
Note: If replacing a Black Style switch, you must use the 30MIFRS. All other applications can use the Gray Style switch.
Watertight Closure Plug Kits
Description
Catalog Number
)RU$&LUFXLW/RFN® unfused and fused Pin and Sleeve mechanical interlocks.
MICPK30
)RUDQG$&LUFXLW/RFN® unfused and fused Pin and Sleeve mechanical interlocks.
MICPK60
Replacement Flip Covers
Description
Catalog Number
)RU$DQGZLUHPHFKDQLFDOLQWHUORFNV
CA3430MI
)RU$ZLUHPHFKDQLFDOLQWHUORFNV
CA530MI
)RU$PHFKDQLFDOLQWHUORFNV
CA60MI
CA3430MI
Replacement Mounting Feet
Description
Catalog Number
Replacement mounting feet and screws for 30 and 60A fused mechanical interlocks.
HBLRFT2 '
Note: ' Package of 10 feet and 10 screws.
www.hubbell-wiring.com
HBLRFT2
®
Wiring Device-Kellems
G-21
IEC Pin and Sleeve
Fused Circuit-Lock®
Specifications and Horsepower Ratings
Specifications
Materials
Typical Specifications
Part
Material
Base and Top
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Ground Plate
Enclosure Screws
Mounting Inserts
Hinge Pin
Hinge Spring
Valox®
Valox®
Zinc, 30A-1", 60A-1¼" NPT
Neoprene
Brass
Neoprene
Galvanized Steel
Stainless Steel
Brass
Nickel-Plated Brass
Stainless Steel
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type
Certification
+XEEHOO+%/0,):
)XVHG&LUFXLW/RFN3LQDQG6OHHYH0HFKDQLFDO,QWHUORFN
3 Pole + Earth
60A, 480V AC, 3 Phase
IEC 60309-2, UL1686C2, Clock Position 7
2XWGRRU;:DWHUWLJKW:DVKGRZQ
,QGRRU'XVWWLJKW)DOOLQJGLUW
UL Listed for US and Canada
Note: This device provides fused switched control of a plug connected load and includes an interlocking feature to prevent the plug from being disconnected or the fuse
door opened while the receptacle is energized. The switch cannot be turned on until the plug is inserted properly.
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating
Withstands 3,000V AC Min.
600V AC.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 200,000 RMS symmetrical amperes
at the voltage rating of receptacle.
Mechanical 10,000 cycles minimum.
2SHUDWLRQV
Mechanical
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Ratings are part of the external label and molded into the receptacle mount and color-coded.
External adjustment feet.
Impact Resistance
Terminal Identification
Product Ratings
Mounting
Environmental
Moisture Resistance
Ingress Protection
)ODPPDELOLW\
2SHUDWLQJ7HPSHUDWXUHV
UV Resistance
)XVH7\SHV
2XWGRRU;:DWHUWLJKW:DVKGRZQ,QGRRU'XVWWLJKW)DOOLQJGLUW
IP66 Suitability.
UL94-5VA and V-0 Classification.
Max. Continuous +75°C; Min. Continuous -40°C.
All materials are UV stabilized.
UL Listed Class “J”. CSA Certified HRCI-J.
Horsepower Ratings
Amps
AC Voltage Rating
Standard
Maximum**
Mechanical Interlock
Use Pin and Sleeve Plug
30
30
30
30
30
30
3Ø 600V AC
3Ø 480V AC
3Ø 240V
120/240V AC
3ØY 277/480V
3ØY 347/600V
7.5
5
3
1.5*
5
7.5
20
15
7.5
3*
15
20
HBL430MIF5W
HBL430MIF7W
HBL430MIF9W
HBL430MIF12W
HBL530MIF7W
HBL530MIF5W
HBL430P5W
HBL430P7W
HBL430P9W
HBL430P12W
HBL530P7W
HBL530P5W
60
60
60
60
60
3Ø 600V AC
3Ø 480V AC
3Ø 240V AC
120/240V AC
3ØY 120/208V
15
15
7.5
3*
7.5
50
30
15
10*
15
HBL460MIF5W
HBL460MIF7W
HBL460MIF9W
HBL460MIF12W
HBL560MIF9W
HBL460P5W
HBL460P7W
HBL460P9W
HBL460P12W
HBL560P9W
Note: *208-240V AC L-L.
**Requires time delay fuses.
Dimensions
7.27" (184.7)
1.51" (38.4) 30A
1.68" (42.7) 60A
10.18" (258.6)
9.31" (236.5)
3.60"
(91.4)
7.19"
(182.6)
11.46"
(291.6)
12.37"
(314.2)
15.03"
(381.8)
14.48"
(367.8)
15.36"
(390.1)
2.69" (68.3) 30A
2.83" (71.9) 60A
8.43" (214.1)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Dimensions in Inches (mm)
G-22
®
Wiring Device-Kellems
www.hubbell-wiring.com
Pin and Sleeve
RoHS
20 and 30 Amps Low Profile
Features and Benefits
Brass Box Terminal
Permits high clamping
pressure on conductors
without damaging wire strands
for best electrical conductivity
Nylon Construction
Both interior and exterior are
made of tough, durable nylon
Split Sleeves
Split sleeves with self-adjusting stainless steel springs
assure constant contact pressure (20A and 30A).
2Q$GHYLFHV%HU\OOLXP&RSSHULQVHUWZLWKPXOWLSOH
FRQWDFWSRLQWVDVVXUHVHDV\LQVHUWLRQDQGDWLJKWÛW
Stainless Steel Terminal Screws
Resist rust and corrosion
Solid One-Piece Pins
Solid construction. Long life,
reliable electrical contact and
maximum conductivity
5FSNJOBM*EFOUJßDBUJPO
Large markings for easy
recognition results in ease
of wiring on the assembly
OLQHRULQWKHÛHOG
Shrouding
Recessed pins are protected
from impact and abuse
Color Coding
4XLFNHDV\YLVXDOLGHQWLÛFDWLRQ
of mating devices
1SPEVDU*EFOUJßDBUJPO
5DWLQJVDQGFHUWLÛFDWLRQDUH
molded into the nylon housing.
%HQHÛW(DV\LGHQWLÛFDWLRQIRUUHRUGHU
Integrated Cord Grip
Limits strain on terminals,
keeps cord connected
L420P9
www.hubbell-wiring.com
L420R9
®
Wiring Device-Kellems
G-23
Pin and Sleeve
RoHS
Low Profile Devices and Specifications
20, 30 and 60 Ampere - North American Ratings
Low Profile Devices
Rating
Amps
Poles
and
Wires
20
Devices
Cord Diameter
ConÛguration
Recep./ Plug/
Conn.
Inlet
Min. Max.
Inches (mm)
AC Voltage
Plug
Receptacle
3P 4W
3Ø 250V
L420P9
L420R9
.350" - .710"
(8.3 - 15.9)
30
3P 4W
125/250V
L430P12
L430R12
.390" - .775"
(9.9 - 19.7)
30
3P 4W
3Ø 250V
L430P9
L430R9
.390" - .775"
(9.9 - 19.7)
Amps
Poles
and
Wires
Plug
Receptacle
60
3P 4W
A460P9
A460R9
Amps
Poles
and
Wires
Plug
Receptacle
60
4P 5W
3ØY 120/208V
A560P9
HBL560R9W
.89" - 1.42"
(22.6 - 36.1)
100
4P 5W
3ØY 120/208V
A5100P9
HBL5100R9W
1.34" - 1.50"
(34.0 - 38.1)
ConÛguration
Recep./ Plug/
Conn.
Inlet
AC Voltage
3Ø 250V
AC Voltage
Dielectric Withstand Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
3000V AC.
250V RMS.
Certified for current interruption at full rated current.
Max. 30 C temperature rise at full rated current
after 50 cycles of overload at 150% of rated
current at a power factor of 75%.
Up to 5,000 connect and disconnect cycles at
full rated current and voltage.
Mechanical
Terminal Identification
Product Identification
Per CSA C22.2 No. 182.1 / UL1682.
Per CSA C22.2 No. 182.1 / UL1682.
Round portable service cords of diameters
commensurate with the device rating as defined
in UL standard 62, CSA C22.2 No. 49 and the
<HAR> European Standards.
Terminals identified in accordance with North
American convention.
Ratings are a permanent part of the device housing.
Environmental
)ODPPDELOLW\
Ingress Protection
2SHUDWLQJ7HPSHUDWXUHV
Min. Max.
Inches (mm)
Application Guide
Electrical
Impact Resistance
Cord Grip Cable Retention
Cord Accommodation
.75" - 1.25"
(19.1 - 31.8)
ConÛguration
Recep./ Plug/
Conn.
Inlet
Specifications
Endurance
Min. Max.
Inches (mm)
HB or better per UL 94 or CSA.
C22.2 No. 0.17.
IP22 Suitability
Maximum Continuous 75° C;
Minimum -40°C without impact.
Agriculture
Chemical Processing
Construction
Entertainment
)RRG6HUYLFH
Light Manufacturing
Manufacturing
Military
Indoor location and maintenance.
Indoor location and maintenance.
Indoors for added safety and abuse
resistance.
Indoor location and maintenance.
)RRGVHUYLFHDUHDVZKHUHDHVWKHWLFV
and space are concerns.
Indoor locations and maintenance.
Light assembly areas, stamping
operations and maintenance areas.
Warehouse and maintenance areas.
Materials
Plug
Material
Case
Shroud
Pin Carrier 20 & 30A
Pin and Carrier 60A
Pins
Assembly Screws
Terminal Screws
Zytel® 101 Nylon
Zytel® 101 Nylon
Zytel® 101 Nylon
High-Impact Thermoset
Brass CDA#360
Stainless Steel (300 series)
Stainless Steel (300 series)
Receptacle
Body
Sleeve Carrier 20 & 30A
Sleeve Carrier 60A
Sleeves
Assembly Screws
Terminal Screws
Adapter Plate 20 & 30A
Adapter Plate 60A
Wall Trim Plate
Panel Mount Trim Plate
Zytel® 101 Nylon
Zytel® 101 Nylon
High-Impact Thermoset
Brass CDA #360
Stainless Steel (300 series)
Stainless Steel (300 series)
Galvanized Steel
Aluminum
Zytel® 101 Nylon
Stainless Steel (300 series)
Note: See page G-25 for product dimensions.
® Zytel and Rynite are registered trademarks of E.I. DuPont Corp.
G-24
®
Wiring Device-Kellems
www.hubbell-wiring.com
Pin and Sleeve
Low Profile Dimensions
Plug Dimensions
Type
A
B
L420P9
2.47"
(62.7)
3.78"
(96.0)
2.93"
(74.4)
C
1.49"
(37.8)
D
Cord Range Diameter
.350"-.710"
(8.9-18.0)
L430P12
2.97"
(75.4)
4.18"
(106.2)
3.50"
(88.9)
1.71"
(43.4)
.390"-.775"
(9.9-19.7)
A460P9
3.38"
(85.9)
4.25"
(108.0)
7.00"
(177.8)
–
.75"-1.25"
(19.1- 31.8)
A5100P9
4.92"
(125.00)
5.07"
(128.81)
8.60"
(218.35)
–
1.34"-1.50"
(34.0- 38.1)
Plugs
Angled Plugs
C
A
D
C
C
A
A
B
B
B
20 and 30A
60A
100A
Wall Mount Receptacle Dimensions
Type
A
B
C
D
E
F
L420R9
2.60"
(66.0)
2.81"
(71.4)
2.28"
(57.9)
2.38"
(60.5)
–
–
L430R12
3.12"
(79.2)
3.12"
(79.2)
2.77"
(70.4)
2.76"
(70.1)
–
–
A460R9
4.50"
(114.3)
4.50"
(114.3)
4.48"
(113.8)
–
3.62"
(91.9)
.50"
(12.7)
Wall Mount Receptacles
A
A
C
B
D
C
B
F
20 and 30A
E
60A
Adapter Plate (Included with “L” and “A” series receptacles)
4.75" Sq.
(120.7)
4.75" Sq.
(120.7)
Panel Cutout
2.55"
(64.8)
2.13"
(54.1)
4.75" Sq.
(120.7)
2.55"
(64.8)
2.13"
(54.1)
2.83"
(71.9) dia.
2.62"
(66.5) dia.
20A
Mounting
2-gang box
30A
Mounting
2-gang box
www.hubbell-wiring.com
20A
60A
Mounting
2-gang box
and 4¹¹⁄₁₆" box
30A
Dimensions in Inches (mm)
®
Wiring Device-Kellems
G-25
Pin and Sleeve Devices
IEC Pin and Sleeve Terminal Identification
IEC Pin and Sleeve Terminal Identification – Rear View
Terminal Marking Pattern*
Rating
Description
Domestic
Receptacle and Connector
International
Domestic
International
Plug and Inlet
Domestic
White
3 Wire
125V AC
277V AC
L+
100-130V
Green
3 Wire
4 Wire
250V AC
480V AC
600V AC
125/250V AC
1ØY 120/208V
Green
L+
200-250V
380-415V AC
—
L+
Green
Green
Green
White
White
N
N
L1
L2
Pilot
L2
380-415V AC
L2
L3
L1
L1
Green
White
5 Wire
(3ØY)
120/208V AC
277/480V AC
347/600V AC
L2
L1
Green
Pilot
4 Wire
220/380V 50Hz
250/440V 60Hz
L3
200/346V to
240/415V
50 and 60Hz
Green
L+
Green
(3Ø ')
250V AC
480V AC
600V AC
International
White
Green
Pilot
L2
N
L3
L1
Green
Pilot
White
L2
L3
L1
N
Green
8Y^O$
6YMK^SYX
YP
Q\Y_XNSXQ
MYX^KM^
ZY]S^SYX
aSVV
MRKXQO
K]
MVYMU
ZY]S^SYX]
K]]SQXON
^Y
]ZOMSPSM
`YV^KQO]
MRKXQO
Pilot contacts supplied on 4 and 5 wire, 63 and 125 Amp international rated devices.
G-26
®
Wiring Device-Kellems
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Hubbell Offers Two Approaches
Ground Path
To reduce the likelihood of electrical shock, the National Electrical Code requires that non-current carrying metallic
components be grounded. Insulgrip Pin and Sleeve wiring devices offer two styles of grounding.
Style I
HBL430PS1W
HBL430RS1W
Receptacles achieve grounding by
attaching the ground conductor
to the ground screw inside the
back box and utilizing the metallic
receptacle shell as a ground source
(see 3P 4W Style I illustration). Plugs
and connectors establish grounding
by means of connecting the flexible
cable ground conductor to a
ground terminal within each device,
which, in turn, is grounded through
the metallic plug or connector
shroud. Any exposed metallic
components are suitably grounded
in the Style I offering.
Style II
HBL430PS2W
HBL430RS2W
The Style II ground path offers two
means of achieving the proper
ground path. In addition to utilizing
the same grounding method as
in the Style I product, the Style II
version incorporates a separate
ground pin and sleeve (see 3P 4W
Style II illustration). This provides a
second ground path. The ground
pin on Style II devices is longer
than other pins, meaning that
they “make first" and “break last,"
assuring protection for people and
equipment.
New Pole and Wire Terminology
Style I
Style II
New
Old
No. of Contacts
New
Old
No. of Contacts
2P 3W
3P 4W
4P 5W
2W 2P
3W 3P
4W 4P
2
3
4
2P 3W
3P 4W
2W 3P
3W 4P
3
4
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-27
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Features and Benefits
Spring-Loaded, Gasketed Cover
Provides a UL Type 4X watertight,
dust-tight seal on connectors
and receptacles
Lid-Stay
Provides a hands-free means
of holding the cover in the open
position for engaging mating
device, troubleshooting or
maintenance purpose
Liquidtight Conduit Adapters
Machined aluminum adapters are
available to provide a means for
DWWDFKLQJÜH[LEOHOLTXLGWLJKWPHWDO
conduit to rear of Hubbell Pin and
Sleeve plug or connector
Watertight Neoprene
Sealing Glands
Provide a reliable seal at
the cable entry point
Pin Chamber
&RQÛQHVDUFLQJZLWKLQWKH
interior chamber during
make and break cycle of
mating devices. Minimizes
arc tracking
Pin O-Ring Seal
Provides a watertight and
dust-tight seal around
the pins to ensure that
contamination will not
enter wire chamber
Powerful Mechanical Cord Grip
Hubbell’s design incorporates two
molded-in teeth to securely grip
the outer cable jacket, and internal
conductors to prevent slippage
and strain on terminations.
Captive barrel nuts ease assembly
and allow higher tightening torque
for maximum cord retention.
G-28
Watertight Cord Entrance
The tapered bore entrance
creates high compression
forces on sealing gland,
providing a watertight seal
around cord. Individual solid
neoprene glands are supplied
to match a full range of cord
sizes and assure watertight
performance.
®
Anti-Vibration Box Terminals
Interlocking box terminals
ensure that terminal screws
remain secure and cannot
ORRVHQ7KHÜRDWLQJER[LV
designed to obtain high-torque
values without damaging
stranded conductors.
Wiring Device-Kellems
Terminal Entrance Holes
Large, square funneled
entrance holes isolate
each conductor to protect
against shorts due to
stray conductor strands.
Tapered hole provides a
fast and easy guide into
the termination chamber.
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Features and Benefits
Locking Ring
Provides a UL Type 4X watertight
and dust-tight seal when the male
and female devices are connected
Product Marking
Catalog number and rating visible
while in use. Markings are color
coded differentiating Style I and
Style II devices
Sleeve O-Ring Seal
Provides a watertight and dusttight seal around the sleeves.
Assures that contamination
will not enter wire chamber
Terminal Screws
Combination phillips/slotted
head design
All-Brass Sleeve Contacts
Provide reliable electrical
contact with mating pins.
Ensures reliable electrical
contact with minimum heat
build-up over time
Thermoplastic Housing
Provides excellent insulating,
impact, corrosion, and
UV resistant properties.
Protects users and internal
components in the roughest
of environments.
www.hubbell-wiring.com
Shroud/Housing Seal
Provides a watertight
and dust-tight seal when
mated with receptacle or
connector
Shrouded Sleeves
The shroud protects contact
sleeves from deforming from
physical abuse. The design
protects the user from the
possibility of touching live
contacts during insertion and
withdrawal of mating parts.
Beryllium Copper SpringPin Design (Patented)
Maintains high unit pressure
on mating sleeves. Ensures
reliable electrical contact
while minimizing heat rise
due to normal pin wear
over time.
®
Thermoset Polyester
Contact Carrier
Molded thermoset polyester
provides high resistance to
electrical tracking. Withstands
higher temperatures which may
result from overload or arcing.
Thermoset properties provide
dimensional stability for this critical
assembly.
Wiring Device-Kellems
G-29
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices - Style I and II
TYPE 4X**
30, 60, 100 and 200 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Rating
Amps
30
2P 3W
600/250
HBL330RS1W
HBL330PS1W
HBL330CS1W
IN330FS1
IN330MS1
3P 4W
600/250
HBL430RS1W
HBL430PS1W
HBL430CS1W
IN430FS1
IN430MS1
4P 5W
600/250
HBL530RS1W
HBL530PS1W
HBL530CS1W
IN530FS1
IN530MS1
2P 3W
600/250
HBL360RS1W
HBL360PS1W
HBL360CS1W
IN360FS1
IN360MS1
3P 4W
600/250
HBL460RS1W
HBL460PS1W
HBL460CS1W
IN460FS1
IN460MS1
4P 5W
600/250
HBL560RS1W
HBL560PS1W
HBL560CS1W
IN560FS1
IN560MS1
2P 3W
600/250
HBL3100RS1W
HBL3100PS1W
HBL3100CS1W
IN3100FS1
IN3100MS1
3P 4W
600/250
HBL4100RS1W
HBL4100PS1W
HBL4100CS1W
IN4100FS1
IN4100MS1
4P 5W
600/250
HBL5100RS1W
HBL5100PS1W
HBL5100CS1W
IN5100FS1
IN5100MS1
3P 4W
600/250
HBL4200RS1W
HBL4200PS1W
HBL4200CS1W
IN4200FS1†
IN4200MS1†
4P 5W
600/250
HBL5200RS1W
HBL5200PS1W
HBL5200CS1W
IN5200FS1†
IN5200MS1†
100
200
Maximum
Voltage
AC/DC
Replacement Interiors
Poles
and
Wires
60
Receptacle/
Connector
Configuration*
Style I Devices
Plug
Receptacle
Rating
Style II Devices
Plug
Replacement Interiors
Amps
30
2P 3W
600/250
HBL330RS2W
HBL330PS2W
HBL330CS2W
IN330FS2
IN330MS2
3P 4W
600/250
HBL430RS2W
HBL430PS2W
HBL430CS2W
IN430FS2
IN430MS2
2P 3W
600/250
HBL360RS2W
HBL360PS2W
HBL360CS2W
IN360FS2
IN360MS2
3P 4W
600/250
HBL460RS2W
HBL460PS2W
HBL460CS2W
IN460FS2
IN460MS2
2P 3W
600/250
HBL3100RS2W
HBL3100PS2W
HBL3100CS2W
IN3100FS2
IN3100MS2
3P 4W
600/250
HBL4100RS2W
HBL4100PS2W
HBL4100CS2W
IN4100FS2
IN4100MS2
2P 3W
600/250
HBL3200RS2W
HBL3200PS2W
HBL3200CS2W
IN3200FS2†
IN3200MS2†
3P 4W
600/250
HBL4200RS2W
HBL4200PS2W
HBL4200CS2W
IN4200FS2†
IN4200MS2 †
100
200
Maximum
Voltage
AC/DC
Connector &
Receptacle
Poles
and
Wires
60
Receptacle/
Connector
Configuration*
Connector
Receptacle
Rating
Amps
200
Poles
and
Wires
4P 5W
Receptacle/
Connector
Configuration*
Plug
Connector
Corrosion Resistant Devices
Maximum
Voltage
AC/DC
600/250
Receptacle
M5200RS1
Plug
M5200PS1
Connector &
Receptacle
Plug
Accessories
Connector
M5200CS1
Back Boxes
MB2003W
MB2004W
Angle Adapter
AA20045
Note: *CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design) is already in a circuit having a rating differing
from the rating of this device.
**While in use or with cover closed.
†Consult factory.
Corrosion resistant cord sets are available on page Z-17 of this catalog.
G-30
®
Wiring Device-Kellems
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
“Reversed Service” Insulgrip® Pin and Sleeve Devices - Style I and II
TYPE 4X**
30, 60, 100 and 200 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Rating
Amps
Poles
and
Wires
30
2P 3W
600/250
3P 4W
60
100
200
Receptacle/
Connector
Configuration*
Style I Devices
Maximum
Voltage
AC/DC
Receptacle
Connector
HBL330RS1WR
HBL330PS1WR
HBL330CS1WR
IN330MS1
IN330FS1
600/250
HBL430RS1WR
HBL430PS1WR
HBL430CS1WR
IN430MS1
IN430FS1
4P 5W
600/250
HBL530RS1WR
HBL530PS1WR
HBL530CS1WR
IN530MS1
IN530FS1
2P 3W
600/250
HBL360RS1WR
HBL360PS1WR
HBL360CS1WR
IN360MS1
IN360FS1
3P 4W
600/250
HBL460RS1WR
HBL460PS1WR
HBL460CS1WR
IN460MS1
IN460FS1
4P 5W
600/250
HBL560RS1WR
HBL560PS1WR
HBL560CS1WR
IN560MS1
IN560FS1
2P 3W
600/250
HBL3100RS1WR
HBL3100PS1WR
HBL3100CS1WR
IN3100MS1
IN3100FS1
3P 4W
600/250
HBL4100RS1WR
HBL4100PS1WR
HBL4100CS1WR
IN4100MS1
IN4100FS1
4P 5W
600/250
HBL5100RS1WR
HBL5100PS1WR
HBL5100CS1WR
IN5100MS1
IN5100FS1
3P 4W
600/250
HBL4200RS1WR
HBL4200PS1WR
HBL4200CS1WR
IN4200MS1†
IN4200FS1†
4P 5W
600/250
HBL5200RS1WR
HBL5200PS1WR
HBL5200CS1WR
IN5200MS1†
IN5200FS1†
Rating
30
2P 3W
600/250
3P 4W
200
Receptacle/
Connector
Configuration*
Style II Devices
Amps
100
Maximum
Voltage
AC/DC
Receptacle
200
Plug
Replacement Interiors
Connector &
Receptacle
Plug
Connector
HBL330RS2WR
HBL330PS2WR
HBL330CS2WR
IN330MS2
IN330FS2
600/250
HBL430RS2WR
HBL430PS2WR
HBL430CS2WR
IN430MS2
IN430FS2
2P 3W
600/250
HBL360RS2WR
HBL360PS2WR
HBL360CS2WR
IN360MS2
IN360FS2
3P 4W
600/250
HBL460RS2WR
HBL460PS2WR
HBL460CS2WR
IN460MS2
IN460FS2
2P 3W
600/250
HBL3100RS2WR
HBL3100PS2WR
HBL3100CS2WR
IN3100MS2
IN3100FS2
3P 4W
600/250
HBL4100RS2WR
HBL4100PS2WR
HBL4100CS2WR
IN4100MS2
IN4100FS2
2P 3W
600/250
HBL3200RS2WR
HBL3200PS2WR
HBL3200CS2WR
IN3200MS2 †
IN3200FS2†
3P 4W
600/250
HBL4200RS2WR
HBL4200PS2WR
HBL4200CS2WR
IN4200MS2 †
IN4200FS2 †
Rating
Amps
Connector &
Receptacle
Plug
Poles
and
Wires
60
Replacement Interiors
Poles
and
Wires
Receptacle/
Connector
Configuration*
4P 5W
Corrosion Resistant Devices
Maximum
Voltage
AC/DC
600/250
Receptacle
M5200BS1R
Plug
M5200CS1R
Plug
Accessories
Connector
—
Back Boxes
MB2003W
MB2004W
Angle Adapter
AA20045
Note: *CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design) is already in a circuit having a rating differing
from the rating of this device.
**While in use or with cover closed.
†Consult factory.
Corrosion resistant cord sets are available on page Z-17 of this catalog.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-31
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Accessories
Insulgrip Pin and Sleeve Metallic Back Boxes
Hubbell manufactures an extensive line of back boxes for use with UL 1686 Pin and Sleeve
devices. Each back box is designed to give the user the maximum amount of wiring room
while achieving grounding to metallic conduit.
Metallic 30º Angle Back Box*
MB301W
Description
Amps
NPT Hub Size
Catalog Number
Back box for 30A devices.
30
30
¾"
1"
MB301W
MB302W
Metallic 15º Angle Back Box*
MB304W
Description
Amps
NPT Hub Size
Catalog Number
Back box for 60A devices.
60
60
60
1"
1¼"
1½"
MB601W
MB602W
MB603W
Metallic Feed-Thru Back Box*
Description
Amps
NPT Hub Size
Catalog Number
Straight feed-thru box for
30A devices.
Straight feed-thru box for
60A devices.
30
30
60
60
60
¾"
1"
1"
1¼"
1½"
MB303W
MB304W
MB604W
MB605W
MB606W
Metallic Four-Way Angle Back Box*
MB601003W
Description
Amps
NPT Hub Size
Catalog Number
)RXUZD\‹DQJOHER[IRU
60 and 100A devices.
60/100
60/100
60/100
200
200
200
1¼"
1½"
2"
2"
2½"
-
MB601002W
MB601003W
MB601004W
MB2003W
MB2004W
AA20045
)RXUZD\‹DQJOHER[IRU
200A devices.
45° Angle adapter only for
200A devices.
MB601006W
Metallic Four-Way Feed-Thru 15º Angle Back Box*
Description
Amps
NPT Hub Size
Catalog Number
)RXUZD\IHHGWKUX‹DQJOH
for 60 and 100A devices.
60/100
60/100
60/100
1¼"
1½"
2"
MB601006W
MB601007W
MB601008W
Note: *These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
Replacement Cord Clamp and Locking Ring
MB2003W
Description
Used on
Cord Clamp
Catalog Number
Locking Ring
Catalog Number
)LWVDOO$SOXJVDQGFRQQHFWRUV
)LWVDOO$SOXJVDQGFRQQHFWRUV
All 3, 4, 5 wire
4 wire (Style 2) and all 5 wire
All 3 wire and 4 wire (Style 1)
4 wire (Style 2) and all 5 wire
All 3 wire and 4 wire (Style 1)
All 3, 4, 5 wire
CC3430
CC60
CC60
CC100
CC100
CC201
ILR1**
ILR2**
ILR3**
ILR4**
ILR5**
—
Rating of Hubbell
Pin and Sleeve Device
Liquidtight
Conduit Size
Hubbell
Liquidtight Adapter
Optional Kellems
Liquidtight Conduit Grip
30 Amp
½" NPT
¾" NPT
1" NPT
1" NPT
1¼" NPT
1¼" NPT
1½" NPT
SAB12
SAB34
SAB100
SAC100
SAC125
SAD125
SAD150
074093402
074093403
074093404
074093404
074093405
074093405
074093406
)LWVDOO$SOXJVDQGFRQQHFWRUV
CC3430
)LWVDOO$SOXJVDQGFRQQHFWRUV
Note: **Locking Ring only.
ILR1
SAB34
Liquidtight Adapters
60 Amp
100 Amp
074093403
G-32
®
Wiring Device-Kellems
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Dimensions
Receptacle Dimensions
A
B
C
D
E
Amps
Type
Style I
Style II
Style I
Style II
Style I
Style II
Style I
Style II
Style I
Style II
30
330R
2.72" (69)
2.72" (69)
3.40" (86)
3.40" (86)
3.89" (99)
3.89" (99)
3.19" (81)
3.19" (81)
1.37" (35)
1.37" (35)
430R
2.72" (69)
2.72" (69)
3.40" (86)
3.40" (86)
3.89" (99)
3.89" (99)
3.19" (81)
3.19" (81)
1.37" (35)
1.37" (35)
530R
2.72" (69)
360R
3.50" (89)
3.50" (89)
4.25" (108)
4.25" (108)
4.66" (118)
4.66" (118)
4.42" (112)
4.42" (112)
1.54" (39)
1.54" (39)
460R
3.50" (89)
3.50" (89)
4.25" (108)
4.25" (108)
4.66" (118)
4.66" (118)
4.42" (112)
4.42" (112)
1.54" (39)
1.54" (39)
560R
3.50" (89)
60
100
3.40" (86)
4.25" (108)
3.19" (81)
4.66" (118)
1.37" (35)
4.42" (112)
1.54" (39)
3100R 3.50" (89)
3.50" (89)
4.25" (108)
4.25" (108)
4.66" (118)
4.70" (119)
5.30" (135)
5.30" (135)
1.54" (39)
1.54" (39)
4100R 3.50" (89)
3.50" (89)
4.25" (108)
4.25" (108)
4.66" (118)
4.70" (119)
5.30" (135)
5.30" (135)
1.54" (39)
1.54" (39)
5100R 3.50" (89)
200
3.89" (99)
4.25" (108)
3200R
6.50" (165)
4200R 6.50" (165)
6.90" (170)
5200R 6.90" (170)
4.66" (118)
7.00" (177)
7.00" (177)
7.39" (187)
7.39" (187)
A
5.30" (135)
D
5.63" (143)
5.63" (143)
5.63" (143)
5.63" (143)
E
1.54" (39)
7.76" (197)
7.76" (197)
.99" (25)
7.76" (197)
.99" (25)
7.76" (197)
A
.99" (25)
.99" (25)
D
E
C
B
C
B
30, 60 and 100 Amp
200 Amp
Plug Dimensions
Connector Body Dimensions
A
Amps
30
B
Style II
Style I
330P 7.53" (191)
7.53" (191)
3.00" (76) 3.00" (76) .375-1.20" (9.5-30.5)
430P 7.53" (191)
7.53" (191)
530P 7.53" (191)
60
Style II
A
Type Style I
Cord Grip Range
B
Type Style I
Style II
Style I
330C 8.38" (213)
8.38" (213)
3.74" (95) 3.74" (95) .375-1.20" (9.5-30.5)
3.00" (76) 3.00" (76) .375-1.20" (9.5-30.5)
430C 8.38" (213)
8.38" (213)
3.00" (76)
530C 8.38" (213)
9.40" (239)
3.40" (86) 3.40" (86) .500-1.45" (12.7-36.8)
460P 9.40" (239)
9.40" (239)
3.40" (86) 3.70" (94) .500-1.45" (12.7-36.8)
3.70" (94)
30
.375-1.20" (9.5-30.5)
360P 9.40" (239)
560P 9.40" (239)
Amps
.500-1.45" (12.7-36.8)
100 3100P 10.70" (272) 10.70" (272) 3.70" (94) 3.70" (94) .925-1.94" (27.0-49.3)
60
Style II
Cord Grip Range
3.74" (95) 3.74" (95) .375-1.20" (9.5-30.5)
3.74" (95)
.375-1.20" (9.5-30.5)
360C 9.90" (251)
9.90" (251)
460C 9.90" (251)
10.10" (256) 3.50" (89) 3.80" (96) .500-1.45" (12.7-36.8)
560C 10.10" (256)
3.50" (89) 3.50" (89) .500-1.45" (12.7-36.8)
3.80" (96)
.500-1.45" (12.7-36.8)
100 3100C 11.70" (297) 11.70" (297) 4.50" (114)4.50" (114).925-1.94" (27.0-49.3)
4100P 10.70" (272) 10.90" (277) 3.70" (94) 4.00" (102) .925-1.94" (27.0-49.3)
4100C 11.70" (297) 11.90" (302) 4.50" (114)4.70" (119) .925-1.94" (27.0-49.3)
5100P 10.90" (277)
5100C 11.90" (302)
200 3200P
4.00" (102)
11.13" (282)
.925-1.94" (27.0-49.3)
6.35" (161) 1.00-2.50" (25.4-63.5)
200 3200C
4.70" (119)
13.65" (346)
.925-1.94" (27.0-49.3)
7.00 (177) 1.00-2.50" (25.4-63.5)
4200P 11.13" (282) 11.13" (282) 6.35" (161) 6.70" (170) 1.00-2.50" (25.4-63.5)
4200C 13.65" (346) 13.65" (346) 7.00" (177)7.39 (187) 1.00-2.50" (25.4-63.5)
5200P 11.13" (282)
5200C 13.65" (346)
6.70" (170)
1.00-2.50" (25.4-63.5)
A
B
7.39" (187)
1.00-2.50" (25.4-63.5)
A
B
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-33
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Dimensions
Metallic Angle Back Box
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
30° Angle back
box for 30A
devices.
¾"
4.87"
(124.0)
2.94"
(75.0)
4.02"
(102.0)
3.40"
(86.0)
4.25"
(108.0)
2.12"
(54.0)
MB301W
1"
4.87"
(124.0)
2.94"
(75.0)
4.02"
(102.0)
3.40"
(86.0)
4.25"
(108.0)
2.12"
(54.0)
MB302W
15° Angle back
box for 60A
devices.
1"
–
4.80"
(121.9)
–
–
5.25"
(133.4)
2.69"
(68.3)
MB601W
1¼"
–
4.80"
(121.9)
–
–
5.25"
(133.4)
2.69"
(68.3)
MB602W
1½"
–
4.80"
(121.9)
–
–
5.25"
(133.4)
2.69"
(68.3)
MB603W
Description
E
A
C
F
B
D
Metallic Angle Box
Catalog Number
Metallic Feed-Thru Back Box
E
Description
Back box for
30A devices.
A
C
Back box for
60A devices.
B
D
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
¾"
5.35"
(136.0)
2.91"
(74.0)
4.53"
(115.0)
3.59"
(91.0)
2.62"
(67.0)
–
MB303W
1"
5.35"
(136.0)
2.91"
(74.0)
4.53"
(115.0)
3.59"
(91.0)
2.62"
(67.0)
–
MB304W
1"
6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
–
MB604W
1¼"
6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
–
MB605W
1½"
6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
–
MB606W
Metallic Feed-Thru Box
Catalog Number
Metallic Four-Way Angle Back Box
E
15° Angle fourway box for
60 and 100A
devices.
C
A
B
Description
D
Metallic Four-Way Angle Box
45° Angle fourway box for
200A devices.
45° Angle adapter
only for 200A devices.
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Catalog Number
1¼"
7.92"
(201.0)
8.52"
(216.0)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601002W
1½"
7.92"
(201.0)
8.52"
(216.0)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601003W
2"
7.92"
(201.0)
8.52"
(216.0)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601004W
2"
10.82"
(274.8)
9.86"
(250.4)
9.50"
(241.3)
8.17"
(207.5)
6.75"
(171.5)
–
MB2003W
2½"
10.82"
(274.8)
9.86"
(250.4)
9.50"
(241.3)
8.17"
(207.5)
6.75"
(171.5)
–
MB2004W
–
8.00"
(203.2)
6.00"
(152.4)
7.00"
(178.0)
8.00"
(203.2)
7.00"
(178.0)
–
AA20045
Metallic Four-Way Feed-Thru 15º Angle Back Box
E
Description
C
A
15°
)RXUZD\
)HHGWKUXER[
for 60 and 100A
devices.
B
D
Metallic Feed-Thru Angle Box
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Catalog Number
1¼"
7.98"
(202.7)
8.55"
(217.2)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601006W
1½"
7.98"
(202.7)
8.55"
(217.2)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601007W
2"
7.98"
(202.7)
8.55"
(217.2)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601008W
Note: These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
Dimensions in Inches (mm)
G-34
®
Wiring Device-Kellems
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
Technical Information
Insulgrip® Pin and Sleeve Device Listings
Materials (30, 60, 100, and 200 Amp)
Typical Specification
Plug
Manufacturer’s ID
Description
Electrical Type
Max. Rating
Configuration
Certification
Material
Valox® 357 (200A Aluminum)
Aluminum
Rynite® SST35 (200A Aluminum)
Nickel Plated Brass
Rynite® SST35
Neoprene
Neoprene
Thermoset Polyester
Thermoset Polyester
Brass (M-Series - Nickel-plated
tellurium copper)
Box Terminal
Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff
Brass
Ground Bracket
Nickel Plated Spring Bronze
Locking Ring
Epoxy Painted Aluminum
Housing
Plug Shroud
Cord Clamps
Clamp Nut
Gland Cap
Gland
25LQJV*DVNHWV6HDOV
Contact Carrier
Retainer
Sleeves
Connector Body
Hubbell HBL430PS2W
Plug, Power Supply
3 Pole + Earth
30 Amp, 600V AC, 250V DC, 50-400Hz
UL 1686, Watertight, C1 Configuration
UL Listed, UL Standard 1682, UL 50, and
UL 1010 (plugs only), CSA Certified to CSA
Spec. C22.2 No. 182.1, No. 94 and No. 159
(plugs only), UL Listed and CSA Certified Type 4X
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 3,000V AC.
600V AC RMS (i.e., minimum creepage and
clearance distance of 6.4 millimeters, per UL 1682).
Certified for current interrupting at full rated
current.
Max. 30°C temperature rise at full rated current
after 50 cycles of overload at 150% of rated current.
Up to 1,000 connect and disconnect cycles at
full rated current and voltage.
Valox® 357 (200 Amp Aluminum)
Epoxy Painted Aluminum
Rynite® SST35
Nickel Plated Brass
Rynite® SST35 (200A Aluminum)
Neoprene
Neoprene
Thermoset Polyester
Thermoset Polyester
Brass (M-Series - Nickel-plated
tellurium copper)
Pin Spring
Beryllium Copper
Box Terminal
Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff
Brass
Ground Bracket
Nickel Plated Spring Bronze
Cover
Epoxy Painted Aluminum
Cover Arm
Epoxy Painted Aluminum
Spring Guide
Stainless Steel (300 Series)
Springs (Arm & Wave)
Stainless Steel (300 Series)
Spring Washer
Stainless Steel (300 Series)
Hinge Bushing
Aluminum
Rivet
Aluminum
Hose Down & Moisture Type 3, 4, 4X per UL 50E and CSA 22.2, No. 94.
Resistance
)ODPPDELOLW\(QFORVXUH UL 94V-0 and CSA C22.2 No. 0.17.
2SHUDWLQJ7HPSHUDWXUHV Maximum Continuous 75°C; Minimum
-40°C without impact -25° with impact.
Hazardous Location
Class I, Division I & II, Groups B, C & D and
(30, 60 & 100A)
&ODVV,,'LYLVLRQ,,,*URXSV)*SHU
(plug only)
UL 1010 & CSA 22.2, No. 159.
Receptacle
Materials
Housing
Connector Shroud
Cord Clamps
Clamp Nut
Gland Cap
Gland
25LQJV*DVNHWV6HDOV
Contact Carrier
Retainer
Pin
+RXVLQJ)ODQJH
25LQJV*DVNHWV6HDOV
Contact Carrier
Retainer
Pin
Epoxy Painted Aluminum
Neoprene
Thermoset Polyester
Thermoset Polyester
Brass (M-Series - Nickel-plated
tellurium copper)
Pin Spring
Beryllium Copper
Box Terminal
Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff
Brass
Ground Bracket
Steel
Cover
Epoxy Painted Aluminum
Cover Arm
Epoxy Painted Aluminum
Spring Guide
Stainless Steel (300 Series)
Springs (Arm & Wave)
Stainless Steel (300 Series)
Spring Washer
Stainless Steel (300 Series)
Hinge Bushing
Aluminum
Rivet
Aluminum
Endurance
Mechanical
Impact Resistance
Cord Grip Cable
Retention
Cord Accommodation
Terminal Identification
Product Identification
Per CSA C22.2, No. 182.1, UL 1682.
Per CSA C22.2, No. 182.1, UL 1682.
Round portable service cords of diameters
commensurate with the device rating as defined
in UL. Standard 62, CSA C22.2 No. 49 and the
harmonized <HAR> European Standards.
Terminals identified in accordance with UL 1686
(1, 2, 3, Green).
Identification and ratings are permanently
fastened to the device housing.
Environmental
Housings
$OO2WKHU0DWHULDOV
Valox® 357 (200A Aluminum).
Resistant to corrosion and chemical attack.
Watertight Application Guide
Industry
Watertight.
Agriculture
Chemical Processing
Construction
Entertainment
)RRG3URFHVVLQJ
)RRG6HUYLFH
Light Manufacturing
Manufacturing
Military
2XWGRRUIRUIDQVKHDWHUVSXPSVHWF
Where subject to water, corrosion.
2XWGRRUVVXEMHFWWRVHYHUHZHDWKHUFRQGLWLRQV
2XWGRRUVVXEMHFWWRVHYHUHZHDWKHU
Where subject to water, corrosion.
Areas subject to wash downs & heavy cleaning.
Subjected to cleaning, solvents & chemicals.
Where subject to water, corrosion.
2XWGRRUFRQVWUXFWLRQRUPDLQWHQDQFH
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Rynite® is a registered trademark of E.I. DuPont Corp.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-35
Pin and Sleeve
Insulgrip® Mechanical Interlocks
Features and Benefits
Non-metallic enclosure meets UL 50E Type 4X
(watertight), 12 (dust-tight) and IP66 suitability
requirements. Enclosure is molded of rugged
thermoplastic Valox® to resist abuse, corrosion
and enhance safety. All external hardware is
stainless steel
Three “molded in” conduit drill points
are located on the top, bottom, and
back surface of enclosure. Conduit
hub provided: 30A 1 inch NPT,
60A 1¼ inch NPT
Adjustable mounting feet (4)
can be mounted in any 1 of
3 positions for ease
of installation
The patented Plug-Check™
mechanism detects the
presence of the plug.
It operates as a clutch to
engage the handle with the
switch and captures the
plug. This action prevents
the plug from being removed
until the switch is turned OFF
High visibility red handle can
be locked in the OFF
position as a method of
compliance with OSHA
lockout requirements.
Accepts up to a ⁵⁄₁₆ inch
padlock shackle
Removable door
for ease of wiring
and installation
Spring-loaded receptacle liftcover with gasket
ensures dust tight rating; liftcover provides
watertight seal when turned and locked
Compact Fused Disconnect
Switch accepts Class “J” fuses.
Fuse holders are top mounted for
easy access. The switch accepts
auxiliary contacts for control circuit
applications including the ON/OFF
control of remote pilot lights or
signal for programmable controllers.
HBL430MIFS2W
Thermoset polyester contact
carrier provides resistance
to electrical tracking and
withstands higher temperatures.
Thermoset properties provide
excellent dimensional stability,
low moisture absorption, and
superior dielectric strength.
Conduit hub and mounting feet are supplied
with each Insulgrip® Mechanical Interlock
Stainless steel ¼ turn
door fasteners for
quick, easy access
to fuses.
Enclosure door can
be locked to prevent
unauthorized access.
Additionally, if the switch
is ON, the door cannot
be opened.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
G-36
®
Wiring Device-Kellems
www.hubbell-wiring.com
Pin and Sleeve
Insulgrip® Mechanical Interlocks - Style II, Fused and Unfused
30 and 60 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Type 4X**
Style II - Fused
Insulgrip® Mechanical Interlocks
Rating
Amps
Poles
and
Wires
30
60
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC
Mechanical Interlock
Mating Plug
3P 4W
600/250
HBL430MIFS2W
HBL430PS2W
3P 4W
600/250
HBL460MIFS2W
HBL460PS2W
Style II - Unfused
Insulgrip® Mechanical Interlocks
Rating
Gray Style Switch
Amps
Poles
and
Wires
30
3P 4W
600/250
HBL430MIS2W
HBL430PS2W
60
3P 4W
600/250
HBL460MIS2W
HBL460PS2W
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC
Mechanical Interlock
Mating Plug
HBLACFSNO
HBL30MIFRS
Black Style Switch
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
*CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design)
is already in a circuit having a rating differing from the rating of this device.
**While in use or with cover closed.
Replacement Auxiliary Contacts
Description
Black Style Switch
Gray Style Switch
Auxiliary contact, normally open, A600 pilot duty, break before break.
ACFSNO
HBLACFSNO
Auxiliary contact, normally closed, A600 pilot duty, break before break.
ACFSNC
HBLACFSNC
Note: Auxiliary contacts are specific to the style switch noted and are NOT interchangeble.
ACFSNO
30MIFRS
Replacement Switches
Description
Black Style Switch
Gray Style Switch
)RU$IXVHGVZLWFKHV
30MIFRS
HBL30MIFRS
)RU$IXVHGVZLWFKHV*UD\6W\OHVZLWFKZLOOUHWURILW%ODFN6W\OHVZLWFK
)RU$XQIXVHGVZLWFKHV
)RU$XQIXVHGVZLWFKHV*UD\6W\OHVZLWFKZLOOUHWURILW%ODFN6W\OHVZLWFK
—
HBL60MIFRS
30MISRS
HBL30MISRS
—
HBL60MISRS
Note: If replacing a Black Style switch, you must use the 30MIFRS. All other applications can use the Gray Style switch.
MICPK30
Watertight Closure Plug Kits
Description
Catalog Number
)RU$&LUFXLW/RFN® unfused and fused Pin and Sleeve mechanical interlocks.
MICPK30
)RUDQG$&LUFXLW/RFN® unfused and fused Pin and Sleeve mechanical interlocks.
MICPK60
Replacement Mounting Feet
Description
Catalog Number
Replacement mounting feet and screws for 30 and 60A fused mechanical interlocks.
HBLRFT2 '
Note: ' Package of 10 feet and 10 screws.
www.hubbell-wiring.com
HBLRFT2
®
Wiring Device-Kellems
G-37
Pin and Sleeve
Technical Information
Specifications, HP Ratings and Dimensions
Typical Specifications
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type (UL 50E)
Ingress Protection
Certification
Performance
+XEEHOO+%/0,)6:
)XVHG,QVXOJULS® Pin and Sleeve
Mechanical Interlock
3 Pole + Earth
60A, 250VDC/600VAC
Per UL 1686 C1
2XWGRRU;:DWHUWLJKW:DVKGRZQ
,QGRRU'XVW7LJKW)DOOLQJ'LUW
IP66 Suitability
UL Listed for US and Canada
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Withstands 3,000VAC Min.
250VDC/600VAC.
Certified for current interrupting at full rated
current and voltage.
Suitable for use on a circuit capable of
delivering not more than 200,000 RMS
symmetrical amperes at the voltage rating
of receptacle.
Mechanical 10,000 cycles minimum.
Short Circuit
Withstand Rating
2SHUDWLRQV
Note: This device provides fused switched control of a plug connected load and
includes an interlocking feature to prevent the plug from being disconnected
or the door from opening while the receptacle is energized. The switch
cannot be turned on until the plug is fully inserted.
Mechanical
Impact Resistance
Terminal Identification
In accordance with UL 746C.
In accordance with UL, CSA and
international conventions.
Ratings are part of the external label and
molded into the receptacle housing.
External adjustable feet.
Product Ratings
Materials
Mounting
Part
Material
Environmental
Base, Door and Handle
Conduit Hub
Enclosure Gasket
and Shaft Seal
Shaft and Mounting Inserts
Ground Plate
Enclosure Screws
and Hinge Spring
Hinge Pin
Contact Carrier
Valox®
Zinc, 30A – 1 in., 60A – 1¼ in. NPT
Neoprene
Moisture Resistance
Ingress Protection
)ODPPDELOLW\
2SHUDWLQJ7HPSHUDWXUHV
Brass
Galvanized Steel
Stainless Steel
UV Resistance
Nickel-Plated Brass
Thermoset Polyester
)XVH7\SHV
2XWGRRU;:DWHUWLJKW:DVKGRZQ
,QGRRU'XVWWLJKW)DOOLQJGLUW
IP66 Suitability.
UL94-5VA and V-0 Classification.
Max. Continuous +60°C;
Min. Continuous -40°C w/o impact.
All exposed insulating materials are
UV stabilized.
UL Listed Class “J”.
CSA Certified HRCI-J.
Horsepower Ratings
30A Horsepower Ratings
60A Horsepower Ratings
3 Phase A.C.
Standard
Maximum*
3 Phase A.C.
Standard
Maximum*
200-240V
480V
600V
3
5
7.5
7.5
15
20
200-240V
480V
600V
7.5
15
15
15
30
50
Note: *Requires time delay fuses.
Dimensions
7.27"
(184.7)
10.18"
(258.6)
9.31"
(236.5)
7.19"
(182.6)
1.51" (38.4) 30A
1.68" (42.7) 60A
3.60"
(91.4)
11.46"
(291.6)
12.37"
(314.2)
15.03"
(381.8)
14.48"
(367.8)
15.36"
(390.1)
4.00" (101.6) 30A
5.00" (127.0) 60A
8.43"
(214.1)
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Dimensions in Inches (mm)
G-38
®
Wiring Device-Kellems
www.hubbell-wiring.com
Control Products
Wiring Devices for Hazardous Locations
Features and Benefits
Hazardous Location Non-Fused UL1686 Mechanical Interlocks and Plugs
Hubbell’s hazardous location line of non-fused mechanically interlocked
disconnect switches are typically used for applications with the presence of
flammable gasses or vapors, ignitable dusts and fibers. They are also suitable for
use in outdoor or indoor damp, wet and dirty locations or in areas where frequent
wash downs, heavy rain, or water spray routinely occurs. These switches are
compact in size to reduce cost and make it easier to position on the wall or piece
of equipment. The enclosures are made of copper-free aluminum and have a
polyester/epoxy finish to prevent corrosion. The high visibility handles can be
locked out to comply with OSHA lock out/tag out regulations.
Copper-free aluminum construction
with electrostatically applied polyester/
HSR[\ÛQLVKWRSUHYHQWFRUURVLRQ
Large visible rotary handle with
“On-Off” indicator allows a quick
means of disconnecting power
VSQ Hazardous Location Ratings
Class I, Div. 1 & 2, Groups B,C,D
Class I, Zones I & 2, Groups IIB+H2, IIA
Class II, Div. 1 & 2, Groups F & G
Class lll
NEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)
Lockable handle to meet
OSHA Lockout/Tagout
regulations
Compact NEMA 4X
enclosure and footfrint
allows easy installation
in tight locations
HBLVP3485
HBLVSQ3034
Features
s
s
s
s
s
s
s
s
Product is UL1686 and is fully interchangeable with other UL1686 configured and listed devices.
NEMA 4X with receptacle lid turned shut or with plug locking ring tightened.
Handle mechanism is chemical resistant Valox® (TM Sabic) thermoplastic.
Plug and switch are interlocked. Switch cannot be turned “ON” without fully inserted plug.
Plug cannot be removed with switch in “ON” position.
Plug held in place when switch is “Off” for convenience. Pull operated release mechanism.
Auxiliary Contact (late-make early-break) contact rated 10 Amp, 1/3 HP at 125/250VAC.
Can be used for operating pilot lights or starter coils.
Feed-through construction.
Internal switch horsepower rated as “suitable as a motor disconnect”.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-39
Control Products
Wiring Devices for Hazardous Locations
30 and 60 Ampere
30 and 60 Amp Non-Fused UL1686 Mechanical Interlocks and Plugs
Amp
Circuit
Mechanical Interlock
Plug
30 Amp
600V AC
2W 3P
HBLVSQ3023
HBLVP3385
3W 4P
HBLVSQ3034
HBLVP3485
60 AMP
600V AC
2W 3P
HBLVSQ6023
HBLVP6385
3W 4P
HBLVSQ6034
HBLVP6485
Note: HBLVSQ 30 Amp models come standard with 1" drilled and tapped conduit openings top and bottom plus two 1" x ¾"
reducers and one ¾" close-up plug for maximum flexibility. 60 amp models come with one 1½" opening on top and bottom
and one 1½" close-up plug.
HBLVSQ3034
Horsepower Ratings (VAC)*
Amp
Circuit
120
240
480
600
1Ø
2
5
10
15
3Ø
3
7.5
15
20
1Ø
–
10
15
20
3Ø
–
10
25
30
30 Amp
60 Amp
HBLVP3485
Note: *Internal switch only.
Dimensions
A
B
C
D
E
F
30A
Mechanical Interlocks
5.75 (146)
10.50 (267)
9.75 (248)
3.75 (95)
3.13 (79)
8.13 (206)
60A
8.13 (206)
14.16 (360)
11.28 (287)
4.03 (102)
2.50 (64)
11.38 (289)
A
C
E
D
B F
Plugs
A
B
C
D
E
6.69 (170)
3.00 (76)
1.88 (48)
5.38 (137)
2.53 (64)
60A, 3 Pole
8.81 (224)
3.38 (86)
2.25 (57)
6.50 (165)
3.00 (76)
60A, 4 Pole
8.81 (224)
3.69 (94)
2.53 (64)
6.50 (165)
3.00 (76)
30A Both
A
B
E
C
Wire Range
Reg. Stranded
Extra Flex
Grip Range
D
Dimensions in Inches (mm)
G-40
®
Wiring Device-Kellems
30A
#10 – #6
#10 – #8
.55–1.2 (14–30)
60A
#6 – #4
#6 – #4
.65–1.5 (16–38)
www.hubbell-wiring.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement