HCS-5300 Series Digital Infrared Wireless Conference System 3.3

HCS-5300 Series Digital Infrared Wireless Conference System 3.3
HCS-5300
Series
Digital
InfraredWireless
WirelessConference
Conference System
System
HCS-5300
Series
Digital
Infrared
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300 Series Digital Infrared Wireless Conference System
3.3
HCS-5300 Series Digital Infrared Wireless Conference Units
3.7
HCS-5300CE_S
Digital IR Wireless Chairman Unit (5 voting keys, 1+3 CHs, silver)
3.7
HCS-5300CE_G
Digital IR Wireless Chairman Unit (5 voting keys, 1+3 CHs, charcoal gray)
3.7
HCS-5300DE_S
Digital IR Wireless Delegate Unit (5 voting keys, 1+3 CHs, silver)
3.9
HCS-5300DE_G
Digital IR Wireless Delegate Unit (5 voting keys, 1+3 CHs, charcoal gray)
3.9
HCS-5301D_S
Digital IR Wireless Delegate Unit (1+3 CHs, 2 channel selectors, dual ID, silver)
3.11
HCS-5301D_G
Digital IR Wireless Delegate Unit (1+3 CHs, 2 channel selectors, dual ID, charcoal gray)
3.11
HCS-5302C_S
Digital IR Wireless Chairman Unit (silver)
3.13
HCS-5302C_G
Digital IR Wireless Chairman Unit (charcoal gray)
3.13
HCS-5302D_S
Digital IR Wireless Delegate Unit (silver)
3.15
HCS-5302D_G
Digital IR Wireless Delegate Unit (charcoal gray)
3.15
HCS-5300HS
Digital IR Wireless Headset
3.17
HCS-5300HT
Portable Digital IR Transmitter
3.17
HCS-5300HT/CHG
Digital IR Receiver Charging Base
3.17
HCS-5300T Series Digital Infrared Transceivers
HCS-5300TD-W
3.18
Digital Infrared Transceiver
3.18
(ceiling, wall or tripod-mounted, excl. tripod when ordered, wide-angle, silver)
HCS-5300TD-WG
Digital Infrared Transceiver
(ceiling, wall or tripod-mounted, excl. tripod when ordered, wide-angle, charcoal gray)
3.18
HCS-5300TD-N
Digital Infrared Transceiver (ceiling, wall or tripod-mounted, excl. tripod when ordered, silver)
3.19
HCS-5300TD-NG
Digital Infrared Transceiver (ceiling, wall or tripod-mounted, excl. tripod when ordered, charcoal gray)
3.19
HCS-5300TDB
Digital Infrared Transceiver (tripod-mounted, excl. tripod when ordered, silver)
3.20
HCS-5300TDS-W
Digital Infrared Transceiver (suspension, wide-angle, silver)
3.21
HCS-5300TDS-N
Digital Infrared Transceiver (suspension, silver)
3.22
3.24
HCS-5300R Series Digital Infrared Receivers
HCS-5300RA
Digital Infrared Receiver (suspension, claret)
3.24
HCS-5300RB
Digital Infrared Receiver (ceiling, wall or tripod-mounted, excl. tripod when ordered, claret)
3.25
HCS-5300M/20 Series Digital Infrared Wireless Conference Main units
3.27
HCS-5300MA/20
Digital IR Wireless Conference System Main Unit (discussion, voting, 1+3 CHs)
3.27
HCS-5300MB/20
Digital IR Wireless Conference System Main Unit (discussion, 1+3 CHs)
3.30
HCS-5300MC/20
Digital IR Wireless Conference System Main Unit (discussion)
3.33
Accessories
3.31
HCS-5300TDP-05
Mounting Suspension for Digital Infrared Transceiver (0.5 m)
3.21, 3.22
HCS-5300TDP-10
Mounting Suspension for Digital Infrared Transceiver (1.0 m)
3.21, 3.22
HCS-5300TDP-20
Mounting Suspension for Digital Infrared Transceiver (2.0 m)
3.21, 3.22
HCS-5300BAT
Lithium Rechargeable Battery Pack
3.36
HCS-5300HT-BAT
Lithium Rechargeable Battery Pack
3.36
HCS-ADP15V
Power Adapter (DC 15 V, 2.2 A)
3.37
3.1
3.1
HCS-5300
Series
Digital
Infrared
Wireless
Conference
System
HCS-5300
Series
Digital
Infrared
Wireless
Conference
System
HCS-5300CHG/08
Charging Unit (8 pcs/case)
3.37
HCS-5352
Cable Splitter (1 input & 4 outputs, for HCS-5300 series)
3.38
HCS-5300TZJ
Tripod
3.38
CBL5300-05
5 m Dedicated Transceiver Cable
3.39
CBL5300-10
10 m Dedicated Transceiver Cable
3.39
CBL5300-20
20 m Dedicated Transceiver Cable
3.39
CBL5300-50
50 m Dedicated Transceiver Cable
3.39
CBL5304-05
5 m Dedicated Receiver Cable
3.39
CBL5304-10
10 m Dedicated Receiver Cable
3.39
CBL5304-20
20 m Dedicated Receiver Cable
3.39
CBL5304-50
50 m Dedicated Receiver Cable
3.39
3.41
HCS-5300 Series Application Software
HCS-5310/50
Basic Setup Management Module
3.42
HCS-5312/50
Professional Venue Design Module
3.45
HCS-5313/50
Microphone Management Module
3.46
HCS-5314/50S
Voting Management Module
3.47
HCS-5315/50
Video Control Module
3.48
HCS-5316/50
Simultaneous Interpretation Module
3.49
HCS-5319/50
Synchronous Audio Recording Management Module
3.49
HCS-5320/50
Synchronous Video Recording Management Module
3.50
HCS-5321/50
Multi-User Conference Control Management Module
3.51
HCS-5322/50
Dual PC Server Hot Spare Module
3.51
HCS-5323/50
Agenda Control Module
3.52
3.2
3.2
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300 Series Digital Infrared Wireless Conference System
Wireless conference systems – portable, easy to install and
a main unit, one or more transceivers and conference units.
convenient to use – are currently trend-setting. Wireless systems
The infrared conference unit features built-in A/D and D/A
do not require structural measures inside a venue.
conversion circuits, digital encoding/decoding and modulator /
Two kinds of wireless conference systems are prevailing: RF (radio
demodulator (DQPSK) circuits. The infrared conference system
frequency) and IR (infrared) technology with analog audio
main unit has a built-in demodulator/modulator (DQPSK), a digital
transmission.
decoding/encoding circuit and a D/A converter circuit. A mixer
RF systems may be interfered (ISM band) or intercepted and
circuit is inserted between the decoding circuit and the D/A
operation either needs license or is confined to the public domain
converter. The main unit can be connected with several infrared
IEC 802.11x band.
transceivers, using a daisy chain or Y connection arrangement
Analog IR systems feature frequency responses which are too
(figure 2 and figure 3)
small for good intelligibility and also show lower S/R ratio.
System theory
The core of the TAIDEN digital
infrared
wireless
system
–
conference
dirATC
(Digital
Infrared Audio Transmitting and
Control Technologies) - is a
new technology originated by
TAIDEN.
It
modulates
signals
encodes
audio
and
and
data
digitally
for
transmission via infrared light,
achieving both multi-channel
audio signals and bidirectional
data transmission and control.
Digitalization
and
Figure 1
wireless
Figure 2
TAIDEN TDIR03 digital
The basic infrared conference unit version with discussion function
transmission via infrared technology are combined to be an ideal
includes microphone, microphone switch button, loudspeaker,
solution for a wireless conference system. The digital infrared
processing
chip
(TAIDEN
integrates
A/D
(analog/digital)
Block diagram of digital infrared conference system
infrared processing chip
TDIR03)
originated
conversion
by
circuit,
battery, etc. The infrared discussion unit receives audio and control
TAIDEN,
signals via infrared from the transceiver - signals previously
digital
generated by the main unit. The discussion unit transmits infrared
encoding/decoding circuit, digital modulator/demodulator (DQPSK),
control signals back to the transceiver which conveys all data to the
as well as filtering and amplification circuit, and implements
main unit. When the microphone is turned on, the infrared
TAIDEN infrared audio transmission and control technology
discussion unit also sends infrared digital audio signals to the main
(dirATC). (figure 1)
unit. A system can consist of up to 1000 infrared discussion units
TAIDEN digital infrared wireless conference system is composed of
Figure 3
with 4 units activated at the same time.
Schematic diagram of the digital infrared conference system
3.3
HCS-5300 Series Digital Infrared Wireless Conference System
System devices
HCS-5300CE/DE
has
speaking,
voting
and
simultaneous
and
Digital infrared transceiver types feature ceiling-, tripod-, wall- and
simultaneous interpretation functions with two channel selectors
suspension-mounting with a maximum radiation range of 13
and two microphone IDs for two delegates: an economic and cost
meters.
interpretation
functions;
HCS-5301D
offers
speaking
saving solution. HCS-5302C/D has speaking function with speaker
and earphone socket.
HCS-5300TD Digital IR Transceiver (ceiling type)
HCS-5300TD Digital IR Transceiver (wall-mounting)
HCS-5300CE/DE Digital IR Wireless Conference Unit
(Mic. / CH Sel. / Vote)
HCS-5300TDB Digital IR Transceiver (tripod-mounting)
HCS-5301D Digital IR Wireless Conference Unit
(Mic. / 2×CH Sel. / 2×ID)
HCS-5300TDS Digital IR Transceiver (suspension-mounting)
Figure 5 TAIDEN HCS-5300T Series Digital Infrared Transceivers
HCS-5302C/D Digital IR Wireless Conference Unit (Mic.)
Figure 4 TAIDEN HCS-5300 Series Digital Infrared Wireless
Conference Units
Figure 6 TAIDEN HCS-5300M/20 Digital Infrared Wireless
Conference Main unit
3.4
HCS-5300 Series Digital Infrared Wireless Conference System
System features
Wireless Conference System
■
Quick set up and removal, free from troubles resulting from
cable breaks and cable deteriorations
■
Easy to setup a system for usage limited in time
■
No impact on furniture, interior equipment or building structure
Infrared Transmission Technology
■
Conference privacy is guaranteed as infrared signals do not
pass through opaque walls or ceilings
■
Wherever there is a partition between conference rooms, there
is no interference
■
Any quantity of infrared wireless conference systems can be
installed within a building
■
The infrared communication frees users from worries about
eavesdropping and radio interference inherent to radio
wave-based wireless communications
■
No radio radiation
■
No radio frequency license needed for operating an infrared
system all over the world
■
■
The first digital infrared wireless conference system in the
■
Adopts 2~8 MHz transmission frequency, undisturbed by HF
driven light sources and mobile phones
world
■
Original dirATC -- digital infrared Audio Transmitting and
Works without errors, even in bright sunlight
Control technologies
■
Wireless system, easy to set up and to remove
Digital Infrared Audio Technology
■
Perfect sound quality as CD from the microphone
■
■
Microphone sensitivity and EQ can be adjusted individually
■
Isolated
audio
recording
function
for
Digital infrared audio processing and transmitting technologies
ensure superb sound quality:
simultaneous
™ Freq. Response: 20 Hz ~ 20 kHz
interpretation (1+3 channels)
™ S/N: >80 dBA
■
Infrared transmission technology guarantees privacy
™ THD: <0.05%
■
Any quantity of infrared wireless conference systems can be
installed within a building
■
Full Functions
No worries about eavesdropping and radio interference, no
radio radiation
■
Full functions (discussion, voting and 1+3 CHs interpretation)
■
No radio frequency license needed for operating an infrared
system all over the world
■
Discussion
■
Vote (5 keys)
■
Simultaneous interpretation (1+3 channels)
■
Isolated
Adopts 2~8 MHz transmission frequency, undisturbed by HF
recording
Excellent immunity to RF interference from mobile phones and
■
Automatic video tracking
■
Compatible
distribution
RF devices
■
audio
function
for
simultaneous
interpretation (1+3 channels)
driven light sources
■
■
with
system
HCS-5100
digital
(HCS-5100R
infrared
series
digital
language
infrared
receivers can work with HCS-5300T series transceivers)
Vertical emission angle of conference unit selectable via LCD
■
menu
Powerful application software modules
Frequency response measurement diagram of a TAIDEN HCS-5300 digital infrared wireless conference system compared with a
customary conventional analog infrared wireless conference system. The system frequency response bandwidth of the TAIDEN
digital infrared wireless conference system is large and flat, thus ensuring a perfect sound performance of the conference system.
3.5
HCS-5300 Series Digital Infrared Wireless Conference System
Digital infrared wireless conference system can be operated in adjacent rooms (including the upstairs and downstairs). The users do
not need to worry about mutual interference or about the breach of confidentiality.
Radio frequency (RF) systems in use in adjacent rooms (including the upstairs and downstairs) will interfere with each other. The
more active units operated, the worse the interferences. As a result, a room could receive the signals of adjacent rooms, thus causing
a breach of confidentiality.
In the Shenzhen Administration Center nine installed RF wireless conference system sets often interfere with each other when
operated. Therefore only alternating operation is possible - a great inconvenience for the user! RF wireless conference systems may
interfere with WiFi devices, Bluetooth devices, wireless radio, cordless phones, wireless projectors, wireless mouses, wireless
keyboards and wireless touch panels of central control systems. These interferences are both space- and time-varying and a cause
for the instability of RF wireless conference systems.
3.6
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300CE
Wireless Chairman Unit with Voting
and Channel Selection
Functions
■
Compliant to IEC 60914
■
Based on TAIDEN originated dirATC-digital infrared Audio
Transmitting and Control technologies
■
Infrared transmitting carrier frequency conforms to IEC
61603-7, DQPSK digital modulation/demodulation technology
■
System controls up to 1000 contribution units
■
Transmitting up to 4 CHs high quality digital audio signals
■
Vertical emission angle selectable via LCD menu
■
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
■
Broadcast standard microphone and digital infrared audio
processing and transmitting technologies ensure 20 Hz ~ 20
kHz perfect sound quality, extremely low distortion factor
■
Digital infrared transmission technology guarantees privacy, no
worries about eavesdropping and radio interference, no
radiation, no radio frequency license needed
■
Adopts 2~8 MHz transmission frequency, excellent immunity to
RF interference from HF-driven lighting and mobile phones
■
Features
Stem microphone can be unplugged during adjournment, easy
to maintain
■
Table, stylish and ergonomic design
■
Mini-microphone, with foam windshield
■
Wireless unit, easy setup and removal
■
Hi-Fi loudspeaker, minimal feedback, mutes automatically
■
Hi-Fi loudspeaker
■
Priority button
■
Pluggable microphone
■
System controls up to 1000 contribution units
■
Microphone On/Off button, 5 voting keys
■
5 voting keys
■
Built-in channel selector
■
Transmitting up to 4 CHs high quality digital audio signals
■
Vertical emission angle selectable via LCD menu
■
Built-in channel selector consists of up/down channel
■
when microphone is active
■
controllable volume independently
™ Channel selector is operable only when earphone is
inserted, built-in speaker will mute automatically on
earphone insertion
select keys and 2-digit channel indicator display
■
Microphone sensitivity and EQ can be adjusted individually
Broadcast standard microphone and digital infrared audio
■
System when operated in stand-alone mode can implement the
processing and transmitting technologies ensure 20 Hz to
following facilities:
20 kHz perfect sound quality, extremely low distortion
™ “ACTIVE MICS”, set the number of delegates permitted to
speak at the same time (1/2/3/4)
factor
■
Digital
infrared
transmission
technology
guarantees
™ “OPEN” mode, if Mic. active limit has been reached, next
microphone cannot be turned on when pressing “Mic.
privacy, no worries about eavesdropping and radio
interference, no radiation, no radio frequency license
On/Off” button
needed
■
Two Ø 3.5 mm stereo headphone jacks for headphones with
excellent
™ “OVERRIDE” mode, if Mic. active limit has been reached,
when pressing “Mic. On/Off” button, next microphone can
immunity to RF interference from HF-driven lighting and
be turned on and the first active microphone will be turned
Adopts
2~8
MHz
transmission
frequency,
mobile phones
off
■
Microphone
sensitivity
and
EQ
can
■
Built-in rechargeable Lithium battery pack
be
adjusted
individually
■
™ Simultaneous interpretation
In combination with the corresponding software modules,
multiform voting can be implemented:
™ Parliamentary: YES/NO/ABSTAIN
™ Questionnaire: 1/2/3/4/5
The stylish and ergonomically designed chairman unit has all the
necessary facilities to enable the user to chair a conference. Similar
in appearance and function to HCS-5300DE Delegate Unit, the
to
be
switched
off
temporarily
■
Automatic video tracking, when cooperating with camera and
■
button. When pressed, the priority button causes all currently active
microphones
™ Audience response: --/-/0/+/++
Key-press sign-in
video switcher unit
HCS-5300CE Chairman Unit includes an extra microphone priority
delegate
■
Can be activated at any time provided that the total number of
active microphones (including the active microphone of the
or
chairman) is within the maximum of 4 active microphones
permanently, allowing the chairman to take control of the meeting.
allowed by the system
Separate rechargeable Lithium battery packs can be removed and
■
replaced in a matter of seconds, providing maximum flexibility in
Priority button can switch off or mute the speaking units
according to preset
recharge scheduling.
3.7
HCS-5300 Series Digital Infrared Wireless Conference System
■
Mechanical
System supports up to 20 chairman units, while only 1
Mounting
chairman unit has the control facilities listed above
■
Tabletop
68 x 180 x 132 mm
Dimensions (h x w x d) (w/o Mic.)
Built-in rechargeable Lithium battery operation duration: 14.4
Weight
hours when microphone is continuously on; 48 hours when
0.46 kg
Excl. battery
microphone is off
0.78 kg
Incl. battery
Silver/ Charcoal gray
Color
Controls and Indicators
■
Graphic 96×64 LCD with back-lighting for displaying channel
number, language name, battery capacity, signal icon and
Ordering Information
emission angle icon
■
Built-in channel selector consists of up/down channel select
HCS-5300CE_S
keys and 2-digit channel indicator display
■
Uni-directional electret condenser microphone with two–color
HCS-5300CE_G
illuminated ring (blue/red)
Digital IR Wireless Chairman Unit
(5
■
Charging indicator
■
Fully charged indicator
■
Power switch
■
Two headphone volume control buttons
■
Five voting keys with indicators
■
Microphone On/Off button with indicator
■
Priority button
voting
keys,
charcoal gray)
Interconnections
■
Socket for pluggable microphone
■
2 × Ø 3.5 mm stereo headphone jack
■
Power adapter interface
Technical Specifications
Electrical
Headphone connection
Frequency response
20 Hz to 20 kHz (-3dB)
Headphone load impedance
≥16 Ohm × 2
10 mW
Headphone output
Microphone
Electret-condenser
Transducer
Uni-directional
Polar pattern
-46 dBV/Pa
Sensitivity
Frequency response
50 Hz to 20 kHz
Directionality 0°/180°
>20 dB (1 kHz)
20 dBA (SPL)
Equivalent noise
125 dB (THD<3%)
Max.SPL
Interface data
Connector
Digital IR Wireless Chairman Unit
(5 voting keys, 1+3 CHs, silver)
2 x Ø 3.5 mm stereo jack for headphone
Operation time of battery pack
When mic. is continuously on
Not omnidirectional
Omnidirectional
Approx. 14.4 hours
Approx. 10 hours
When mic. is off
Approx. 48 hours
15% mic. on + 85% mic. off
Approx. 36 hours
3.8
1+3
CHs,
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300DE
Wireless Discussion Unit with
Voting and Channel Selection
Functions
■
Compliant to IEC 60914
■
Based on TAIDEN originated dirATC-digital infrared Audio
Transmitting and Control technologies
■
Infrared transmitting carrier frequency conforms to IEC
61603-7, DQPSK digital modulation/demodulation technology
■
System controls up to 1000 contribution units
■
Transmitting up to 4 CHs high quality digital audio signals
■
Vertical emission angle selectable via LCD menu
■
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
■
Broadcast standard microphone and digital infrared audio
processing and transmitting technologies ensure 20 Hz ~ 20
kHz perfect sound quality, extremely low distortion factor
■
Digital infrared transmission technology guarantees privacy, no
worries about eavesdropping and radio interference, no
radiation, no radio frequency license needed
■
Excellent immunity to RF interference from HF-driven light and
mobile phones
■
Features
Stem microphone can be unplugged during adjournment, easy
to maintain
■
Table, stylish and ergonomic design
■
Mini-microphone, with foam windshield
■
Wireless unit, easy setup and removal
■
Hi-Fi loudspeaker, minimal feedback, mutes automatically
■
Vertical acceptance/emission angle selectable
■
Hi-Fi loudspeaker
■
Pluggable microphone
■
System controls up to 1000 contribution units
■
Microphone On/Off button, 5 voting keys
■
5 voting keys
■
Built-in channel selector
■
Transmitting up to 4 CHs high quality digital audio signals
■
Vertical emission angle selectable via LCD menu
■
Built-in channel selector consists of up/down channel
■
when microphone is active
■
separate volume control
™ Channel selector is operable only when earphone is
inserted, built-in speaker will mute automatically on
earphone insertion
select keys and 2-digit channel indicator display
■
Microphone sensitivity and EQ can be adjusted individually
Broadcast standard microphone and digital infrared audio
■
System when operated in stand-alone mode can implement the
processing and transmitting technologies ensure 20 Hz to
following facilities:
20 kHz perfect sound quality, extremely low distortion
™ “ACTIVE MICS”, set the number of delegates permitted to
speak at the same time (1/2/3/4)
factor
■
Digital
infrared
transmission
technology
guarantees
™ “OPEN” mode, if Mic. active limit has been reached, next
microphone cannot be turned on when pressing “Mic.
privacy, no worries about eavesdropping and radio
interference, no radiation, no radio frequency license
On/Off” button
needed
■
Excellent immunity to RF interference from HF-driven
■
Microphone
™ “OVERRIDE” mode, if Mic. active limit has been reached,
when pressing “Mic. On/Off” button, next microphone can
lighting and mobile phones
sensitivity
and
be turned on and the first active microphone will be turned
EQ
can
be
adjusted
off
individually
■
Two Ø 3.5 mm stereo headphone jacks for headphones with
Built-in rechargeable Lithium battery pack
■
™ Simultaneous interpretation
In combination with the corresponding software modules,
multiform voting can be implemented:
™ Parliamentary: YES/NO/ABSTAIN
™ Questionnaire: 1/2/3/4/5
The multi-functional wireless delegate unit meets the demands of
even the largest conferences and provides facilities for speaking,
listening, voting and selecting language channels. It has excellent
immunity to RF interference from mobile phones and features a
■
™ Audience response: --/-/0/+/++
Key-press sign-in
■
Automatic video tracking, when cooperating with camera and
video switcher unit
channel selector and two headphone connections. Channel
■
selection is automatically limited to the number of language
Built-in rechargeable Lithium battery operation duration: 14.4
hours when microphone is continuously on; 48 hours when
channels available. The loudspeaker offers superior acoustics with
microphone is off
minimal feedback, for enhanced intelligibility.
Separate rechargeable Lithium battery packs can be removed and
replaced in a matter of seconds, providing maximum flexibility in
recharge scheduling.
3.9
HCS-5300 Series Digital Infrared Wireless Conference System
Controls and Indicators
■
Ordering Information
Graphic 96×64 LCD with back-lighting for displaying channel
number, language name, battery capacity, signal icon and
HCS-5300DE_S
emission angle icon
■
Built-in channel selector consists of up/down channel select
HCS-5300DE_G
keys and 2-digit channel indicator display
■
Digital IR Wireless Delegate Unit
(5 voting keys, 1+3 CHs, silver)
Digital IR Wireless Delegate Unit
Uni-directional electret condenser microphone with two–color
(5
illuminated ring (blue/red)
charcoal gray)
■
Charging indicator
■
Fully charged indicator
■
Power switch
■
Two headphone volume control buttons
■
Five voting keys with indicators
■
Microphone On/Off button with indicator
Interconnections
■
Socket for pluggable microphone
■
2 × Ø 3.5 mm stereo headphone jack
■
Power adapter interface
Technical Specifications
Electrical
Headphone connection
Frequency response
20 Hz to 20 kHz (-3dB)
Headphone load impedance
≥16 Ohm × 2
10 mW
Headphone output
Microphone
Transducer
Electret-condenser
Uni-directional
Polar pattern
-46 dBV/Pa
Sensitivity
Frequency response
50 Hz to 20 kHz
Directionality 0°/180°
>20 dB (1 kHz)
20 dBA (SPL)
Equivalent noise
125 dB (THD<3%)
Max.SPL
Interface data
Connector
2 x Ø 3.5 mm stereo jack for headphone
Operation time of battery pack
When mic. is continuously on
Not omnidirectional
Omnidirectional
Approx. 14.4 hours
Approx. 10 hours
When mic. is off
Approx. 48 hours
15% mic. on + 85% mic. off
Approx. 36 hours
Mechanical
Mounting
Dimensions (h x w x d) (w/o Mic.)
Tabletop
68 x 180 x 132 mm
Weight
Excl. battery
Incl. battery
Color
0.46 kg
0.78 kg
Silver/ Charcoal gray
3.10
voting
keys,
1+3
CHs,
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5301D
Wireless Discussion Unit with Dual
Channel Selection
The multi-functional wireless delegate unit can be used by two
delegates. It provides facilities for speaking, listening and selecting
language channels and has excellent immunity to RF interference
from mobile phones. It features two separate headphone
connections
with
individual
volume
control,
two
separate
microphone on/off buttons and two separate channel selectors on
both sides of the unit, allowing one unit to serve two delegates. The
loudspeaker offers superior acoustics with minimal feedback, for
enhanced intelligibility.
Separate rechargeable Lithium battery packs can be removed and
replaced in a matter of seconds, providing maximum flexibility in
recharge scheduling.
Functions
■
Compliant to IEC 60914
■
Based on TAIDEN originated dirATC-digital infrared Audio
Transmitting and Control technologies
■
Infrared transmitting carrier frequency conforms to IEC
61603-7, DQPSK digital modulation/demodulation technology
Features
■
Table, stylish and ergonomic design
■
Wireless unit, easy setup and removal
■
Vertical acceptance/emission angle selectable
■
Hi-Fi loudspeaker
■
Pluggable microphone
■
System controls up to 1000 contribution units
■
Transmitting up to 4 CHs high quality digital audio signals
■
Vertical emission angle selectable via LCD menu
■
Built-in dual channel selectors consist of up/down channel
Every delegate unit is assigned an individual ID for convenient
■
Can be used as a dual delegate unit
■
Broadcast standard microphone and digital infrared audio
radiation, no radio frequency license needed
■
Built-in rechargeable Lithium battery pack
■
Can be used as a dual delegate unit
■
Built-in dual channel selectors
™ Channel selector is operable only when earphone is
inserted, built-in speaker will mute automatically on
lighting and mobile phones
and
EQ
can
be
With two separate microphone on/off buttons for individual
microphone control and individual delegate identification
needed
sensitivity
Two Ø 3.5 mm stereo headphone jacks for headphones with
separate volume control
interference, no radiation, no radio frequency license
■
Hi-Fi loudspeaker, minimal feedback, mutes automatically
■
privacy, no worries about eavesdropping and radio
Microphone
Mini-microphone, with foam windshield
■
when microphone is active
guarantees
■
■
■
factor
Excellent immunity to RF interference from HF-driven
Stem microphone can be unplugged during adjournment, easy
to maintain
20 kHz perfect sound quality, extremely low distortion
■
Excellent immunity to RF interference from HF-driven light and
mobile phones
■
processing and transmitting technologies ensure 20 Hz to
technology
Digital infrared transmission technology guarantees privacy, no
worries about eavesdropping and radio interference, no
video tracking
transmission
Broadcast standard microphone and digital infrared audio
kHz perfect sound quality, extremely low distortion factor
■
on the left and right respectively and easy for automatic
infrared
Vertical emission angle selectable via LCD menu
■
processing and transmitting technologies ensure 20 Hz ~ 20
The microphone on/off buttons provide dual delegate
Digital
Transmitting up to 4 CHs high quality digital audio signals
■
setup and to avoid double ID forever
identification, used for individual delegate identification
■
System controls up to 1000 contribution units
■
■
select keys and 2-digit channel indicator display
■
■
earphone insertion
adjusted
individually
■
Microphone sensitivity and EQ can be adjusted individually
■
System when operated in stand-alone mode can implement the
following facilities:
™ “ACTIVE MICS”, set the number of delegates permitted to
speak at the same time (1/2/3/4)
™ “OPEN” mode, if Mic. active limit has been reached, next
microphone cannot be turned on when pressing “Mic.
On/Off” button
™ “OVERRIDE” mode, if Mic. active limit has been reached,
when pressing “Mic. On/Off” button, next microphone can
be turned on and the first active microphone will be turned
off
™ Simultaneous interpretation
3.11
HCS-5300 Series Digital Infrared Wireless Conference System
■
Mechanical
Automatic video tracking, when cooperating with camera and
Mounting
video switcher unit
■
Dimensions (h x w x d) (w/o Mic.)
Built-in rechargeable Lithium battery operation duration: 14.4
Tabletop
68 x 180 x 132 mm
Weight
hours when microphone is continuously on; 48 hours when
0.46 kg
Excl. battery
microphone is off
0.78 kg
Incl. battery
Color
Silver/ Charcoal gray
Controls and Indicators
■
Two graphic 96×64 LCDs with back-lighting for channel
number, language name, battery capacity, signal icon and
Ordering Information
emission angle icon
■
■
HCS-5301D_S
Built-in two channel selectors consist of up/down channel
Digital IR Wireless Delegate Unit
select keys and 2-digit channel indicator display
(1+3 CHs, 2 channel selectors,
Uni-directional electret condenser microphone with two–color
dual ID, silver)
illuminated ring (blue/red)
HCS-5301D_G
■
Charging indicator
■
Fully charged indicator
■
Power switch
■
Two headphone volume control buttons
■
Two microphone On/Off buttons with indicator
dual ID, charcoal gray)
Interconnections
■
Socket for pluggable microphone
■
2 × Ø 3.5 mm stereo headphone jack
■
Power adapter interface
Technical Specifications
Electrical
Headphone connection
20 Hz to 20 kHz (-3dB)
Frequency response
Headphone load impedance
≥16 Ohm × 2
10 mW
Headphone output
Microphone
Transducer
Electret-condenser
Uni-directional
Polar pattern
-46 dBV/Pa
Sensitivity
Frequency response
50 Hz to 20 kHz
Directionality 0°/180°
>20 dB (1 kHz)
20 dBA (SPL)
Equivalent noise
125 dB (THD<3%)
Max.SPL
Interface data
Connector
Digital IR Wireless Delegate Unit
(1+3 CHs, 2 channel selectors,
2 x Ø 3.5 mm stereo jack for headphone
Operation time of battery pack
When mic. is continuously on
Not omnidirectional
Omnidirectional
Approx. 14.4 hours
Approx. 10 hours
When mic. is off
Approx. 48 hours
15% mic. on + 85% mic. off
Approx. 36 hours
3.12
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5302C
Wireless Chairman Unit
Functions
■
Compliant to IEC 60914
■
Based on TAIDEN originated dirATC-digital infrared Audio
Transmitting and Control technologies
■
Infrared transmitting carrier frequency conforms to IEC
61603-7, DQPSK digital modulation/demodulation technology
■
System controls up to 1000 contribution units
■
Vertical emission angle selectable via LCD menu
■
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
■
Broadcast standard microphone and digital infrared audio
processing and transmitting technologies ensure 20 Hz ~ 20
kHz perfect sound quality, extremely low distortion factor
■
Digital infrared transmission technology guarantees privacy, no
worries about eavesdropping and radio interference, no
radiation, no radio frequency license needed
■
Excellent immunity to RF interference from HF-driven light and
mobile phones
■
Features
to maintain
■
Table, stylish and ergonomic design
■
Wireless unit, easy setup and removal
■
Vertical acceptance/emission angle selectable
■
Hi-Fi loudspeaker
■
Priority button
■
Pluggable microphone
■
System controls up to 1000 contribution units
■
Vertical emission angle selectable via LCD menu
■
Broadcast standard microphone and digital infrared audio
■
Mini-microphone, with foam windshield
■
Hi-Fi loudspeaker, minimal feedback, mutes automatically
when microphone is active
■
separate volume control
Microphone On/Off button
■
Microphone sensitivity and EQ can be adjusted individually
■
System when operated in stand-alone mode can implement the
following facilities:
™ “ACTIVE MICS”, set the number of delegates permitted to
speak at the same time (1/2/3/4)
20 kHz perfect sound quality, extremely low distortion
™ “OPEN” mode, if Mic. active limit has been reached, next
factor
Digital
infrared
transmission
technology
microphone cannot be turned on when pressing “Mic.
guarantees
On/Off” button
privacy, no worries about eavesdropping and radio
™ “OVERRIDE” mode, if Mic. active limit has been reached,
when pressing “Mic. On/Off” button, next microphone can
interference, no radiation, no radio frequency license
needed
■
be turned on and the first active microphone will be turned
Excellent immunity to RF interference from HF-driven
off
lighting and mobile phones
■
Microphone
sensitivity
and
EQ
can
be
■
adjusted
Automatic video tracking, when cooperating with camera and
video switcher unit
individually
■
Two Ø 3.5 mm stereo headphone jacks for headphones with
■
processing and transmitting technologies ensure 20 Hz to
■
Stem microphone can be unplugged during adjournment, easy
■
Built-in rechargeable Lithium battery pack
Can be activated at any time provided that the total number of
active microphones (including the active microphone of the
chairman) is within the maximum of 4 active microphones
allowed by the system
The stylish and ergonomically designed chairman unit has all the
■
necessary facilities to enable the user to chair a conference. Similar
according to preset
in appearance and function to HCS-5302D Delegate Unit, the
■
HCS-5302C Chairman Unit includes an extra microphone priority
microphones
to
be
switched
off
temporarily
System supports up to 20 chairman units, while only 1
chairman unit has the control facilities listed above
button. When pressed, the priority button causes all currently active
delegate
Priority button can switch off or mute the speaking units
■
or
Built-in rechargeable Lithium battery operation duration: 14.4
hours when microphone is continuously on; 48 hours when
permanently, allowing the chairman to take control of the meeting.
microphone is off
Separate rechargeable Lithium battery packs can be removed and
replaced in a matter of seconds, providing maximum flexibility in
Controls and Indicators
recharge scheduling.
■
Graphic 96×64 LCD with back-lighting for displaying battery
capacity, signal icon and emission angle icon
■
Uni-directional electret condenser microphone with two–color
illuminated ring (blue/red)
■
3.13
Charging indicator
HCS-5300 Series Digital Infrared Wireless Conference System
■
Fully charged indicator
■
Power switch
■
Two headphone volume control buttons
■
Microphone On/Off button with indicator
■
Priority button
Interconnections
■
Socket for pluggable microphone
■
2 × Ø 3.5 mm stereo headphone jack
■
Power adapter interface
Technical Specifications
Electrical
Headphone connection
Frequency response
20 Hz to 20 kHz (-3dB)
Headphone load impedance
≥16 Ohm × 2
10 mW
Headphone output
Microphone
Electret-condenser
Transducer
Uni-directional
Polar pattern
-46 dBV/Pa
Sensitivity
Frequency response
50 Hz to 20 kHz
Directionality 0°/180°
>20 dB (1 kHz)
20 dBA (SPL)
Equivalent noise
125 dB (THD<3%)
Max.SPL
Interface data
2 x Ø 3.5 mm stereo jack for headphone
Connector
Operation time of battery pack
When mic. is continuously on
Not omnidirectional
Approx. 14.4 hours
Approx. 10 hours
Omnidirectional
When mic. is off
Approx. 48 hours
15% mic. on + 85% mic. off
Approx. 36 hours
Mechanical
Mounting
Tabletop
Dimensions (h x w x d) (w/o Mic.)
68 x 180 x 132 mm
Weight
0.46 kg
Excl. battery
0.78 kg
Incl. battery
Silver/ Charcoal gray
Color
Ordering Information
HCS-5302C_S
Digital IR Wireless Chairman Unit (silver)
HCS-5302C_G
Digital IR Wireless Chairman Unit (charcoal gray)
3.14
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5302D
Wireless Discussion Unit
Functions
■
Compliant to IEC 60914
■
Based on TAIDEN originated dirATC-digital infrared Audio
Transmitting and Control technologies
■
Infrared transmitting carrier frequency conforms to IEC
61603-7, DQPSK digital modulation/demodulation technology
■
System controls up to 1000 contribution units
■
Vertical emission angle selectable via LCD menu
■
Every delegate unit is assigned an individual ID for convenient
setup and to avoid double ID forever
■
Broadcast standard microphone and digital infrared audio
processing and transmitting technologies ensure 20 Hz ~ 20
kHz perfect sound quality, extremely low distortion factor
■
Digital infrared transmission technology guarantees privacy, no
worries about eavesdropping and radio interference, no
radiation, no radio frequency license needed
■
Excellent immunity to RF interference from HF-driven light and
mobile phones
■
Features
to maintain
■
Table, stylish and ergonomic design
■
Wireless unit, easy setup and removal
■
Vertical acceptance/emission angle selectable
■
Hi-Fi loudspeaker
■
Pluggable microphone
■
System controls up to 1000 contribution units
■
Vertical emission angle selectable via LCD menu
■
Broadcast standard microphone and digital infrared audio
■
Mini-microphone, with foam windshield
■
Hi-Fi loudspeaker, minimal feedback, mutes automatically
when microphone is active
■
separate volume control
Microphone On/Off button
■
Microphone sensitivity and EQ can be adjusted individually
■
System when operated in stand-alone mode can implement the
following facilities:
™ “ACTIVE MICS”, set the number of delegates permitted to
20 kHz perfect sound quality, extremely low distortion
speak at the same time (1/2/3/4)
factor
Digital
infrared
transmission
technology
™ “OPEN” mode, if Mic. active limit has been reached, next
guarantees
microphone cannot be turned on when pressing “Mic.
privacy, no worries about eavesdropping and radio
On/Off” button
interference, no radiation, no radio frequency license
™ “OVERRIDE” mode, if Mic. active limit has been reached,
when pressing “Mic. On/Off” button, next microphone can
needed
■
Excellent immunity to RF interference from HF-driven
be turned on and the first active microphone will be turned
lighting and mobile phones
sensitivity
Two Ø 3.5 mm stereo headphone jacks for headphones with
■
processing and transmitting technologies ensure 20 Hz to
■
Stem microphone can be unplugged during adjournment, easy
■
Microphone
and
EQ
can
■
Built-in rechargeable Lithium battery pack
be
off
adjusted
■
individually
Automatic video tracking, when cooperating with camera and
video switcher unit
■
Built-in rechargeable Lithium battery operation duration: 14.4
hours when microphone is continuously on; 48 hours when
microphone is off
This wireless delegate unit meets the basic demands of most
conferences. It provides facilities for speaking and listening and has
excellent immunity to RF interference from mobile phones. The
Controls and Indicators
loudspeaker offers superior acoustics with minimal feedback, for
■
enhanced intelligibility.
Graphic 96×64 LCD with back-lighting for displaying battery
capacity, signal icon and emission angle icon
Separate rechargeable Lithium battery packs can be removed and
■
replaced in a matter of seconds, providing maximum flexibility in
Uni-directional electret condenser microphone with two–color
illuminated ring (blue/red)
recharge scheduling.
3.15
■
Charging indicator
■
Fully charged indicator
■
Power switch
■
Two headphone volume control buttons
■
Microphone On/Off button with indicator
HCS-5300 Series Digital Infrared Wireless Conference System
Interface data
Interconnections
■
Socket for pluggable microphone
■
2 × Ø 3.5 mm stereo headphone jack
■
Power adapter interface
2 x Ø 3.5 mm stereo jack for headphone
Connector
Operation time of battery pack
When mic. is continuously on
Not omnidirectional
Technical Specifications
Approx. 14.4 hours
Omnidirectional
Approx. 10 hours
When mic. is off
Approx. 48 hours
15% mic. on + 85% mic. off
Approx. 36 hours
Electrical
Mechanical
Headphone connection
Frequency response
Mounting
20 Hz to 20 kHz (-3dB)
≥16 Ohm × 2
Headphone load impedance
Transducer
0.46 kg
Excl. battery
Microphone
0.78 kg
Incl. battery
Electret-condenser
Silver/ Charcoal gray
Color
Uni-directional
Polar pattern
68 x 180 x 132 mm
Weight
10 mW
Headphone output
Tabletop
Dimensions (h x w x d) (w/o Mic.)
-46 dBV/Pa
Sensitivity
Frequency response
50 Hz to 20 kHz
Directionality 0°/180°
>20 dB (1 kHz)
Ordering Information
20 dBA (SPL)
Equivalent noise
125 dB (THD<3%)
Max.SPL
HCS-5302D_S
Digital IR Wireless Delegate Unit (silver)
HCS-5302D_G
Digital IR Wireless Delegate Unit (charcoal gray)
Conference Units Function list
Simultaneous
Type No.
Status
Discussion
Sign-in
Voting
HCS-5300CE
chairman
√
√
√
1+3 CHs
HCS-5300DE
delegate
√
√
√
1+3 CHs
HCS-5301D
delegate
√
HCS-5302C
chairman
√
HCS-5302D
delegate
√
interpretation
(1+3 CHs)×2
3.16
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300HS
Digital IR Wireless Headset
HCS-5300HT
Portable Digital IR Transmitter
Features
Features
■
Used with HCS-5300HS
■
Digital infrared wireless transmission
■
■
Lithium battery: 7.4 V DC,2200 mAh
Operation time of battery pack: approx. 8 hours
■
Connector: 5PIN MINI male plug with self-locking
■
LED indicators:
■
Used with HCS-5300HT
■
Digital infrared wireless transmission
■
Max. emission distance: 6 m
■
Emission angle: Straight up ± 45°
■
Dimensions (h x w x d): 103×76×33 mm
■
Frequency response of microphone: 50 Hz~20 kHz
■
Color: black
■
Sensitivity of microphone: -46 dBV/Pa
■
Connector: 5PIN MINI male plug with self-locking
™ Power indicator
™ Two–color indicator (blue: fully charged; red: charging)
Ordering Information
HCS-5300HT
Ordering Information
HCS-5300HS
Portable Digital IR Transmitter
Digital IR Wireless Headset
HCS-5300HT/CHG
Digital IR Receiver Charging Base
Features
■
Mains voltage: 15 V DC (HCS-ADP15V power adapter)
■
Power consumption: 15 W
■
Charging Time: approx. 2 hours
■
Charging Capacity: 1 HCS-5300HT
■
LED indicator: power indicator
■
Dimensions (h x w x d): 57×108×82 mm
■
Weight: 0.2 kg
■
Color: black
Ordering Information
HCS-5300HT/CHG
3.17
Digital IR Receiver Charging Base
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300TD-W
Digital Infrared Transceiver
Indicators
■
Power indicating light
Interconnections
■
Equipped with a 2.0 m specific cable with 6P-DIN male plug.
For extension purposes, 6P-DIN extension cable can be used.
Technical Specifications
Electrical
Features
Wavelength
870 nm
Modulation method
DQPSK
Compliant to IEC 60914
■
Infrared transmitting carrier frequency conforms to IEC
Current consumption
61603-7,
Connector
■
2 ~ 8 MHz
Carrier frequency
■
DQPSK
33 V DC (supplied from HCS-5300M)
Voltage
digital
modulation/demodulation
Max. 550 mA
6P-DIN
technology
Cable
Transmitting in 2 ~ 8 MHz frequency band, eliminating the
Acceptance/emission angle
interference from HF-driven lights
Vertical
■
Tripod, wall or ceiling mounting, easy to install
Horizontal
■
Inside the coverage area of infrared signals, also
HCS-5100R/RA digital
operation
infrared
simultaneously
to
receivers
receive
can
(1+3
be
2.0 m specific cable with 6P-DIN male plug
150° (75°+75°)
360°
Approx 13 m in radius from the
Communication area
in
point
channels)
underneath
the
unit
(ceiling height: 2.5 ~ 4.5 m)
simultaneous interpretation
Mechanical
Mounting
HCS-5300TD-W
digital
infrared
transceiver
manages
Ceiling, wall or tripod mounting
Ø 181 mm, 63 mm (height)
Dimensions
communication between main unit and conference units. It can be
Weight
mounted onto the ceiling and wall for optional coverage or fixed
Color
0.5 kg
Silver/ Charcoal gray
onto a tripod at any appropriate spot.
Ordering Information
HCS-5300TD-W
Digital Infrared Transceiver (ceiling, wall or
tripod-mounted, excl. tripod when ordered,
wide-angle, silver)
HCS-5300TD-WG
Digital Infrared Transceiver (ceiling, wall or
tripod-mounted, excl. tripod when ordered,
wide-angle, charcoal gray)
Footprint of HCS-5300TD-W digital infrared transceiver (If H=2.5 ~ 3.0 m, then R= 13 m; if H=3.5 ~ 4.5 m, then R= 11 m)
3.18
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300TD-N
Digital Infrared Transceiver
Indicators
■
Power indicating light
Interconnections
■
Equipped with a 2.0 m specific cable with 6P-DIN male plug.
For extension purposes, 6P-DIN extension cable can be used.
Technical Specifications
Electrical
Features
Wavelength
870 nm
Modulation method
DQPSK
Compliant to IEC 60914
■
Infrared transmitting carrier frequency conforms to IEC
Current consumption
61603-7,
Connector
■
2 ~ 8 MHz
Carrier frequency
■
DQPSK
33 V DC (supplied from HCS-5300M)
Voltage
digital
modulation/demodulation
Max. 550 mA
6P-DIN
technology
Cable
Transmitting in 2 ~ 8 MHz frequency band, eliminating the
Acceptance/emission angle
interference from HF-driven lights
Vertical
■
Tripod, wall or ceiling mounting, easy to install
Horizontal
■
Inside the coverage area of infrared signals, also
HCS-5100R/RA digital
operation
infrared
simultaneously
to
receivers
receive
can
(1+3
be
2.0 m specific cable with 6P-DIN male plug
90° (45°+45°)
360°
Approx 9 m in radius from the
Communication area
in
point
channels)
underneath
the
unit
(ceiling height: 5 ~ 7 m)
simultaneous interpretation
Mechanical
Mounting
HCS-5300TD-N
digital
infrared
transceiver
manages
Ceiling, wall or tripod mounting
Ø 181 mm, 63 mm (height)
Dimensions
communication between main unit and conference units. It can be
Weight
mounted onto the ceiling and wall for optional coverage or fixed
Color
0.5 kg
Silver/ Charcoal gray
onto a tripod at any appropriate spot.
Ordering Information
HCS-5300TD-N
Digital Infrared Transceiver (ceiling,
wall or tripod-mounted, excl. tripod
when ordered, silver)
HCS-5300TD-NG
Digital Infrared Transceiver (ceiling,
wall or tripod-mounted, excl. tripod
when ordered, charcoal gray)
Footprint of HCS-5300TD-N digital infrared transceiver (If H=5 ~ 7 m, then R= 9 m)
3.19
HCS-5300 Series Digital Infrared Wireless Conference System
tripod at any appropriate spot.
HCS-5300TDB
Digital Infrared Transceiver
Indicators
■
Power indicating light
Interconnections
■
Equipped with a 2.0 m specific cable with 6P-DIN male plug.
For extension purposes, 6P-DIN extension cable can be used.
Technical Specifications
Electrical
Wavelength
870 nm
Modulation method
DQPSK
2 ~ 8 MHz
Carrier frequency
33 V DC (supplied from HCS-5300M)
Voltage
Max. 550 mA
Current consumption
6P-DIN
Connector
2.0 m specific cable with 6P-DIN male plug
Cable
Acceptance/emission angle
Features
■
Compliant to IEC 60914
■
Infrared transmitting carrier frequency conforms to IEC
61603-7,
■
40°
Vertical
DQPSK
360°
Horizontal
digital
Approx 8 m in radius from the unit
Communication area
modulation/demodulation
technology
Mechanical
Transmitting in 2 ~ 8 MHz frequency band, eliminating the
Mounting
interference from HF-driven lights
Dimensions
Tripod mounting
Ø 181 mm, 63 mm (height)
■
Tripod-mounting, easy to install
Weight
0.5 kg
■
Inside the coverage area of infrared signals, also
Color
Silver
HCS-5100R/RA digital
operation
infrared
simultaneously
to
receivers
receive
can
(1+3
be
in
channels)
simultaneous interpretation
Ordering Information
HCS-5300TDB
Digital Infrared Transceiver (tripod-mounted,
excl. tripod when ordered, silver)
HCS-5300TDB digital infrared transceiver manages communication
between main unit and conference units. It can be fixed onto a
Footprint of HCS-5300TDB digital infrared transceiver
3.20
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300TDS-W
Digital Infrared Transceiver
Interconnections
■
Equipped with a 2.0 m specific cable with 6P-DIN male plug.
For extension purposes, 6P-DIN extension cable can be used.
Technical Specifications
Electrical
Wavelength
870 nm
Modulation method
DQPSK
2 ~ 8 MHz
Carrier frequency
33 V DC (supplied from HCS-5300M)
Voltage
Max. 550 mA
Current consumption
6P-DIN
Connector
Cable
2.0 m specific cable with 6P-DIN male plug
Acceptance/emission angle
150° (75°+75°)
Vertical
360°
Horizontal
Communication area
Approx 13 m in radius from the
point
Features
the
unit
Mechanical
■
Compliant to IEC 60914
■
Infrared transmitting carrier frequency conforms to IEC
Mounting
61603-7,
Dimensions
■
underneath
(ceiling height: 2.5 ~ 4.5 m)
DQPSK
digital
modulation/demodulation
technology
Weight
Transmitting in 2 ~ 8 MHz frequency band, eliminating the
Color
Suspension mounting
Ø 201 mm, 100 mm (height)
0.63 kg
Silver
interference from HF-driven lights
■
Suspension mounting, easy to install
■
Inside the coverage area of infrared signals, also
HCS-5100R/RA digital
operation
infrared
simultaneously
to
receivers
receive
can
(1+3
be
Ordering Information
in
channels)
HCS-5300TDS-W
simultaneous interpretation
■
Optional suspension length: 0.5 m, 1.0 m or 2.0 m
Optional suspension
HCS-5300TDP-05
HCS-5300TDS-W
digital
infrared
transceiver
Digital Infrared Transceiver
(suspension, wide-angle, silver)
Mounting Suspension of Digital
Infrared Transceiver (0.5 m)
manages
communication between main unit and conference units. It can be
HCS-5300TDP-10
suspension mounted onto the ceiling at appropriate height.
Mounting Suspension of Digital
Infrared Transceiver (1.0 m)
HCS-5300TDP-20
Mounting Suspension of Digital
Infrared Transceiver (2.0 m)
Indicators
■
Power indicating light
Footprint of HCS-5300TDS-W digital infrared transceiver (If H=2.5 ~ 3.0 m, then R= 13 m; if H=3.5 ~ 4.5 m, then R=11 m)
3.21
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300TDS-N
Digital Infrared Transceiver
Technical Specifications
Electrical
Wavelength
870 nm
Modulation method
DQPSK
2 ~ 8 MHz
Carrier frequency
33 V DC (supplied from HCS-5300M)
Voltage
Max. 550 mA
Current consumption
6P-DIN
Connector
2.0 m specific cable with 6P-DIN male plug
Cable
Acceptance/emission angle
90° (45°+45°)
Vertical
360°
Horizontal
Approx 9 m in radius from the
Communication area
point
underneath
the
unit
(ceiling height: 5 ~ 7 m)
Mechanical
Mounting
Suspension mounting
Ø 201 mm, 100 mm (height)
Dimensions
Compliant to IEC 60914
■
Infrared transmitting carrier frequency conforms to IEC
DQPSK
digital
modulation/demodulation
Ordering Information
technology
■
Transmitting in 2 ~ 8 MHz frequency band, eliminating the
HCS-5300TDS-N
interference from HF-driven lights
Suspension mounting, easy to install
■
Inside the coverage area of infrared signals, also
HCS-5100R/RA digital
infrared
simultaneously
to
receivers
receive
can
(1+3
be
Optional suspension
in
HCS-5300TDP-05
channels)
Mounting Suspension of Digital
Infrared Transceiver (0.5 m)
simultaneous interpretation
■
Digital Infrared Transceiver
(suspension, silver)
■
operation
Silver
Color
■
61603-7,
0.63 kg
Weight
Features
Optional suspension length: 0.5 m, 1.0 m or 2.0 m
HCS-5300TDP-10
Mounting Suspension of Digital
Infrared Transceiver (1.0 m)
HCS-5300TDS-N
digital
infrared
transceiver
HCS-5300TDP-20
manages
Mounting Suspension of Digital
Infrared Transceiver (2.0 m)
communication between main unit and conference units. It can be
suspension mounted onto the ceiling at appropriate height.
Indicators
■
Power indicating light
Interconnections
■
Equipped with a 2.0 m specific cable with 6P-DIN male plug.
For extension purposes, 6P-DIN extension cable can be used.
Footprint of HCS-5300TDS-N digital infrared transceiver
(If H=5 ~ 7 m, then R=9 m)
3.22
HCS-5300 Series Digital Infrared Wireless Conference System
Coverage area of Transceivers
Type No.
Mounting height (H)
2.5 m
HCS-5300TD-W
3.0 m
HCS-5300TD-WG
3.5 m
HCS-5300TDS-W
4.0 m
Coverage area radius (R)
13 m
11 m
4.5 m
5.0 m
HCS-5300TD-N
5.5 m
HCS-5300TD-NG
6.0 m
HCS-5300TDS-N
6.5 m
7.0 m
3.23
9m
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300RA
Digital Infrared Receiver
Technical Specifications
Electrical
Wavelength
870 nm
Modulation method
DQPSK
2 ~ 8 MHz
Carrier frequency
33 V DC (supplied from HCS-5300M)
Voltage
Max. 30 mA
Current consumption
6P-DIN
Connector
10.0 m specific cable with 6P-DIN male plug
Cable
Acceptance angle
150° (75°+75°)
Vertical
360°
Horizontal
Approx 13 m in radius from the
Communication area
point
Features
■
Cooperates
with
HCS-5300TD
or
HCS-5100T,
used
the
unit
Mechanical
additionally in special applications if the transceivers
■
cannot be installed optimally
Suspension mounting
■
Infrared transmitting carrier frequency conforms to IEC
61603-7,
underneath
(ceiling height: 2.5 ~ 4.5 m)
DQPSK
digital
Mounting
Suspension mounting
Ø 34 mm, 55 mm (height)
Dimensions
0.1 kg (excl. cable)
Weight
Claret
Color
modulation/demodulation
technology
■
Transmitting in 2 ~ 8 MHz frequency band, eliminating the
interference from HF-driven lights
Ordering Information
HCS-5300RA
Digital Infrared Receiver (suspension, claret)
Interconnections
■
Communication area of HCS-5300RA
Equipped with a 10.0 m specific cable CBL5304-10 with
6P-DIN male plug. For extension purposes, 6P-DIN extension
Ceiling height (H)
cable CBL5304-05/10/20/50 can be used.
2.5 m
3.0 m
Communication radius (R)
13 m
3.5 m
4.0 m
11 m
4.5 m
Footprint of HCS-5300RA Digital Infrared Receiver (If H=2.5 ~3.0 m, then R=13 m; if H=3.5 ~4.5 m, then R=11 m)
3.24
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300RB
Digital Infrared Receiver
Technical Specifications
Electrical
Wavelength
870 nm
Modulation method
DQPSK
2 ~ 8 MHz
Carrier frequency
33 V DC (supplied from HCS-5300M)
Voltage
Max. 30 mA
Current consumption
6P-DIN
Connector
10.0 m specific cable with 6P-DIN male plug
Cable
Acceptance angle
150° (75°+75°)
Vertical
360°
Horizontal
Communication area
point
Features
■
Cooperates
underneath
the
unit
(ceiling height: 2.5 ~ 4.5 m)
with
HCS-5300TD
or
HCS-5100T,
used
additionally in special applications if the transceivers
Mechanical
■
cannot be installed optimally
Suspension mounting
■
Infrared transmitting carrier frequency conforms to IEC
Dimensions
61603-7,
Weight
DQPSK
digital
Mounting
modulation/demodulation
Ceiling, wall or tripod mounting
Ø 61 mm, 43 mm (height)
0.15 kg (excl. cable)
Claret
Color
technology
■
Approx 13 m in radius from the
Transmitting in 2 ~ 8 MHz frequency band, eliminating the
interference from HF-driven lights
Ordering Information
HCS-5300RB
Digital Infrared Receiver (ceiling, wall
Interconnections
or tripod-mounted, excl. tripod when
■
ordered, claret)
Equipped with a 10.0 m specific cable CBL5304-10 with
6P-DIN male plug. For extension purposes, 6P-DIN extension
cable CBL5304-05/10/20/50 can be used.
Communication area of HCS-5300RB
Ceiling height (H)
2.5 m
3.0 m
Communication radius (R)
13 m
3.5 m
4.0 m
11 m
4.5 m
Footprint of HCS-5300RB Digital Infrared Receiver (If H=2.5 ~3.0 m, then R=13 m; if H=3.5 ~4.5 m, then R=11 m)
3.25
HCS-5300 Series Digital Infrared Wireless Conference System
System Connection [HCS-5300RA Digital Infrared Receiver + HCS-5100T Digital Infrared Radiator]
3.26
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300MA/20 Digital Infrared
Wireless Conference Main Unit
■
Digital
infrared
transmission
technology
guarantees
conference privacy. Users are released from worries about
eavesdropping and radio interference inherent to radio
wave-based wireless communications
■
Operating the IR conference system does not require a radio
frequency license all over the world
■
Supports up to 4 simultaneous interpretation language
channels (incl. the original floor channel)
■
Controls up to 1000 contribution units
■
Microphone sensitivity and EQ can be adjusted individually
■
4 audio effect modes are prestored:
■
Built-in adjustable audio compression feature
■
Compatible with HCS-5100 series digital infrared language
NORMAL/PRESS/THEATER/PARLIAMENT
distribution system, when cooperating with digital infrared
Features
■
language distribution system, enabling a larger audience to join
in the conference
Original dirATC-digital infrared Audio Transmitting and
■
Control technologies
■
channels (incl. the original floor channel)
■
Digital
infrared
audio
processing
and
™ “OPEN” mode, if Mic. active limit has been reached, next
microphone cannot be turned on when pressing “Mic.
transmitting
technologies ensure perfect sound quality
■
Digital
infrared
transmission
technology
On/Off” button
guarantees
™ “OVERRIDE” mode, if Mic. active limit has been reached,
when pressing “Mic. On/Off” button, next microphone can
conference privacy. Users are released from worries about
eavesdropping and radio interference inherent to radio
be turned on and the first active microphone will be turned
wave-based wireless communications
■
off
Operating the IR conference system does not require a
™ Simultaneous interpretation
radio frequency license all over the world
■
■
■
Compatible with HCS-5100 series digital infrared language
multiform voting can be implemented:
language distribution system, enabling a larger audience
™ Parliamentary: YES/NO/ABSTAIN
to join in the conference
™ Questionnaire: 1/2/3/4/5
Microphone
sensitivity
and
EQ
can
be
™ Audience response: --/-/0/+/++
adjusted
■
Automatic video tracking, when cooperating with camera and
video switcher unit
TCP/IP communication protocol in PC controlled mode,
■
easy to carry out remote control
■
In combination with the corresponding software modules,
distribution system, when cooperating with digital infrared
individually
■
Implemented features in stand-alone mode:
™ Set the number (1/2/3/4) of delegates permitted to speak at
the same time
Supports up to 4 simultaneous interpretation language
Advanced TCP/IP communication protocol in PC controlled
mode, easy to carry out remote control
Excellent immunity to RF interference from mobile phones
■
and comparable devices
Connection to central control system through RS-232 interface
for centralized control
Controls and Indicators
The digital infrared wireless conference main unit includes features
for controlling delegate microphones, distributing simultaneous
■
interpretation and conducting voting sessions, without an operator.
Graphic LCD with back-lighting displays status and menu of
the system configuration, supporting multi language menu
In combination with a PC, the main unit brings greater
sophistication to conference control. Users can access an
extensive range of software modules, each with a specific function
in controlling and monitoring a conference, greatly expanding the
capacity to manage a conference.
■
Four buttons for configuration
■
Power switch
■
Standby switch with indicator
■
Operation mode indicators
■
LINE IN 1 electric level adjust knob
■
Conference unit floor audio channel master volume adjust
knob
Functions
■
Compliant to IEC 60914
Interconnections
■
Based on TAIDEN originated dirATC-digital infrared Audio
■
■
■
Multiple audio in/out interfaces:
Transmitting and Control technologies
™ One balanced XLR-M for MIC. mixed audio output
Infrared transmitting carrier frequency conforms to IEC
™ One balanced XLR-M for floor audio line out
61603-7, DQPSK digital modulation/demodulation technology
™ 3 interpretation audio input interfaces (1~3)
Digital infrared audio processing and transmitting technologies
™ 4 interpretation audio output interfaces (0~3)
ensure perfect sound quality
3.27
HCS-5300 Series Digital Infrared Wireless Conference System
Mechanical
™ Balanced LINE IN 1 interface (Ø 6.4 mm) and LINE IN 2
interface (RCA) for connection to external audio devices
Mounting
™ Ø 3.5 mm jack for stereo monitor earphone
■
2 × USB interfaces at front panel to upgrade system and to
save system parameters
■
Ethernet interface
■
Video switcher interface
■
Emergency
signal
interface:
for
connection
to
Tabletop or mounted in a 19" rack
Dimensions (h x w x d)
For table use, with feet
99 x 430 x 325 mm
For 19" rack use, with brackets
89 x 478 x 350 mm
Weight
8.3 kg
Color
White
public
emergency system. Pauses the conference automatically if the
system is switched on and sends alarm signals to conference
Ordering Information
units
■
HCS-5300MA/20
6 digital infrared transceiver interfaces, each interface can
each main unit can connect up to 24 transceivers
■
1 interpreter unit interface: for connection to HCS-4385K2/50
Interpreter Unit
■
Power supply socket
■
HF signal output interface (BNC socket) for connection to
HCS-5100T Digital Infrared Radiator
■
RS-232 interface for connection to central control system
Technical Specifications
Electrical
Frequency response
20 Hz to 20 kHz (-3dB)
≥80 dBA
SNR
Dynamic range
≥80 dB
THD at 1 kHz
≤0.05%
Isolation
≥80 dB
Power supply
America, Japan
AC 110 V ~ 120 V, 60 Hz
Asia, Europe
AC 220 V ~ 240 V, 50 Hz
Max. 160 W
Power consumption
Audio inputs
LINE IN 1
+10 dBu, BAL.
LINE IN 2
+10 dBu, UNBAL.
-12 dBu ~ +12 dBu, UNBAL.
SI. INPUT (CH 1 ~ 3) RCA×3
Audio outputs
LINE OUT 1
+20 dBu, BAL.
+20 dBu, BAL.
MIC. MIX (1~4) OUTPUT
SI. OUTPUT (CH 0 ~ 3) RCA×4
+10 dBu, UNBAL.
Interface data
Transceivers I/O terminal
External control terminal
6P-DIN socket × 6
RS-232 D-sub (9P, male),
USB interface,
RJ-45 (ETHERNET)
Interpreter unit terminal
HF OUT (Radiator terminal)
6P-DIN socket× 1
BNC connector × 1
Alarm terminal
3.81 mm Phoenix connectors, 2-pole
Video switcher terminal
3.81 mm Phoenix connectors, 4-pole
Digital IR Wireless Conference System
Main Unit (discussion, voting, 1+3 CHs)
connect 4 transceivers if operating distributor HCS-5352, thus
3.28
HCS-5300 Series Digital Infrared Wireless Conference System
System Connection [Wireless discussion + 1+3 CHs digital simultaneous interpretation + voting + video tracking]
3.29
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300MB/20 Digital Infrared
Wireless Conference Main Unit
■
Digital
infrared
transmission
technology
guarantees
conference privacy. Users are released from worries about
eavesdropping and radio interference inherent to radio
wave-based wireless communications
■
Operating the IR conference system does not require a radio
frequency license all over the world
■
Supports up to 4 simultaneous interpretation language
channels (incl. the original floor channel)
■
Controls up to 1000 contribution units
■
Microphone sensitivity and EQ can be adjusted individually
■
4 audio effect modes are prestored:
■
Built-in adjustable audio compression feature
■
Compatible with HCS-5100 series digital infrared language
NORMAL/PRESS/THEATER/PARLIAMENT
distribution system, when cooperating with digital infrared
Features
■
language distribution system, enabling a larger audience to join
in the conference
Original dirATC-digital infrared Audio Transmitting and
■
Control technologies
■
channels (incl. the original floor channel)
■
Digital
infrared
audio
processing
and
™ “OPEN” mode, if Mic. active limit has been reached, next
microphone cannot be turned on when pressing “Mic.
transmitting
technologies ensure perfect sound quality
■
Digital
infrared
transmission
technology
On/Off” button
guarantees
™ “OVERRIDE” mode, if Mic. active limit has been reached,
when pressing “Mic. On/Off” button, next microphone can
conference privacy. Users are released from worries about
eavesdropping and radio interference inherent to radio
be turned on and the first active microphone will be turned
wave-based wireless communications
■
off
Operating the IR conference system does not require a
™ Simultaneous interpretation
radio frequency license all over the world
■
■
Compatible with HCS-5100 series digital infrared language
■
language distribution system, enabling a larger audience
sensitivity
and
EQ
can
be
■
adjusted
■
Connection to central control system through RS-232 interface
for centralized control
individually
■
Advanced TCP/IP communication protocol in PC controlled
mode, easy to carry out remote control
to join in the conference
Microphone
Automatic video tracking, when cooperating with camera and
video switcher unit
distribution system, when cooperating with digital infrared
■
Implemented features in stand-alone mode:
™ Set the number (1/2/3/4) of delegates permitted to speak at
the same time
Supports up to 4 simultaneous interpretation language
TCP/IP communication protocol in PC controlled mode,
easy to carry out remote control
Controls and Indicators
Excellent immunity to RF interference from mobile phones
■
and comparable devices
Graphic LCD with back-lighting displays status and menu of
the system configuration, supporting multi language menu
The digital infrared wireless conference main unit includes features
for controlling delegate microphones and distributing simultaneous
interpretation, without an operator.
In combination with a PC, the main unit brings greater
■
Four buttons for configuration
■
Power switch
■
Standby switch with indicator
■
Operation mode indicators
■
LINE IN 1 electric level adjust knob
■
Conference unit floor audio channel master volume adjust
knob
sophistication to conference control. Users can access an
extensive range of software modules, each with a specific function
in controlling and monitoring a conference, greatly expanding the
Interconnections
capacity to manage a conference.
■
Multiple audio in/out interfaces:
™ One balanced XLR-M for MIC. mixed audio output
™ One balanced XLR-M for floor audio line out
™ 3 interpretation audio input interfaces (1~3)
™ 4 interpretation audio output interfaces (0~3)
Functions
■
Compliant to IEC 60914
■
Based on TAIDEN originated dirATC-digital infrared Audio
™ Balanced LINE IN 1 interface (Ø 6.4 mm) and LINE IN 2
interface (RCA) for connection to external audio devices
Transmitting and Control technologies
■
™ Ø 3.5 mm jack for stereo monitor earphone
Infrared transmitting carrier frequency conforms to IEC
■
61603-7, DQPSK digital modulation/demodulation technology
■
2 × USB interfaces at front panel to upgrade system and to
save system parameters
Digital infrared audio processing and transmitting technologies
■
Ethernet interface
ensure perfect sound quality
■
Video switcher interface
3.30
HCS-5300 Series Digital Infrared Wireless Conference System
Color
■
Emergency
signal
interface:
for
connection
to
White
public
emergency system. Pauses the conference automatically if the
Ordering Information
system is switched on and sends alarm signals to conference
units
■
HCS-5300MB/20
6 digital infrared transceiver interfaces, each interface can
connect 4 transceivers if operating distributor HCS-5352, thus
each main unit can connect up to 24 transceivers
■
1 interpreter unit interface: for connection to HCS-4385K2/50
Interpreter Unit
■
Power supply socket
■
HF signal output interface (BNC socket) for connection to
HCS-5100T Digital Infrared Radiator
■
RS-232 interface for connection to central control system
Technical Specifications
Electrical
Frequency response
20 Hz to 20 kHz (-3dB)
≥80 dBA
SNR
Dynamic range
≥80 dB
THD at 1 kHz
≤0.05%
Isolation
≥80 dB
Power supply
America, Japan
AC 110 V ~ 120 V, 60 Hz
Asia, Europe
AC 220 V ~ 240 V, 50 Hz
Max. 160 W
Power consumption
Audio inputs
LINE IN 1
+10 dBu, BAL.
LINE IN 2
+10 dBu, UNBAL.
-12 dBu ~ +12 dBu, UNBAL.
SI. INPUT (CH 1 ~ 3) RCA×3
Audio outputs
LINE OUT 1
+20 dBu, BAL.
+20 dBu, BAL.
MIC. MIX (1~4) OUTPUT
SI. OUTPUT (CH 0 ~ 3) RCA×4
+10 dBu, UNBAL.
Interface data
Transceivers I/O terminal
6P-DIN socket × 6
RS-232 D-sub (9P, male),
External control terminal
USB interface,
RJ-45 (ETHERNET)
6P-DIN socket× 1
Interpreter’s unit terminal
BNC connector × 1
HF OUT (Radiator terminal)
Alarm terminal
3.81 mm Phoenix connectors, 2-pole
Video switcher terminal
3.81 mm Phoenix connectors, 4-pole
Mechanical
Mounting
Tabletop or mounted in a 19" rack
Dimensions (h x w x d)
For table use, with feet
99 x 430 x 325 mm
For 19" rack use, with brackets
89 x 478 x 350 mm
Weight
Digital IR Wireless Conference System
Main Unit (discussion, 1+3 CHs)
8.3 kg
3.31
HCS-5300 Series Digital Infrared Wireless Conference System
System Connection
[Wireless discussion + 1+3 CHs digital simultaneous interpretation + video tracking + central control]
3.32
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300MC/20 Digital Infrared
Wireless Conference Main Unit
■
Digital
infrared
transmission
technology
guarantees
conference privacy. Users are released from worries about
eavesdropping and radio interference inherent to radio
wave-based wireless communications
■
Operating the IR conference system does not require a radio
frequency license all over the world
■
Controls up to 1000 contribution units
■
Microphone sensitivity and EQ can be adjusted individually
■
4 audio effect modes are prestored:
■
Built-in adjustable audio compression feature
■
Compatible with HCS-5100 series digital infrared language
NORMAL/PRESS/THEATER/PARLIAMENT
distribution system, when cooperating with digital infrared
language distribution system, enabling a larger audience to join
in the conference
Features
■
■
Control technologies
■
Digital
infrared
audio
processing
and
™ “OPEN” mode, if Mic. active limit has been reached, next
microphone cannot be turned on when pressing “Mic.
transmitting
technologies ensure perfect sound quality
■
Digital
infrared
transmission
technology
On/Off” button
guarantees
™ “OVERRIDE” mode, if Mic. active limit has been reached,
when pressing “Mic. On/Off” button, next microphone can
conference privacy. Users are released from worries about
eavesdropping and radio interference inherent to radio
be turned on and the first active microphone will be turned
wave-based wireless communications
■
off
Operating the IR conference system does not require a
■
radio frequency license all over the world
■
■
■
to join in the conference
sensitivity
and
EQ
can
be
Advanced TCP/IP communication protocol in PC controlled
mode, easy to carry out remote control
language distribution system, enabling a larger audience
Microphone
Automatic video tracking, when cooperating with camera and
video switcher unit
Compatible with HCS-5100 series digital infrared language
distribution system, when cooperating with digital infrared
■
Implemented features in stand-alone mode:
™ Set the number (1/2/3/4) of delegates permitted to speak at
the same time
Original dirATC-digital infrared Audio Transmitting and
Connection to central control system through RS-232 interface
for centralized control
adjusted
individually
■
■
TCP/IP communication protocol in PC controlled mode,
Controls and Indicators
easy to carry out remote control
■
Excellent immunity to RF interference from mobile phones
Graphic LCD with back-lighting displays status and menu of
the system configuration, supporting multi language menu
and comparable devices
The digital infrared wireless conference main unit includes feature
for controlling delegate microphones, without an operator.
In combination with a PC, the main unit brings greater
■
Four buttons for configuration
■
Power switch
■
Standby switch with indicator
■
Operation mode indicators
■
LINE IN 1 electric level adjust knob
■
Conference unit floor audio channel master volume adjust
knob
sophistication to conference control. Users can access an
extensive range of software modules, each with a specific function
in controlling and monitoring a conference, greatly expanding the
Interconnections
capacity to manage a conference.
■
Multiple audio in/out interfaces:
™ One balanced XLR-M for MIC. mixed audio output
™ One balanced XLR-M for floor audio line out
™ Balanced LINE IN 1 interface (Ø 6.4 mm) for connection to
external audio device
Functions
■
Compliant to IEC 60914
■
Based on TAIDEN originated dirATC-digital infrared Audio
■
Transmitting and Control technologies
■
save system parameters
Infrared transmitting carrier frequency conforms to IEC
61603-7, DQPSK digital modulation/demodulation technology
■
™ Ø 3.5 mm jack for stereo monitor earphone
2 × USB interfaces at front panel to upgrade system and to
Digital infrared audio processing and transmitting technologies
ensure perfect sound quality
■
Ethernet interface
■
Video switcher interface
■
Emergency
signal
interface:
for
connection
to
public
emergency system. Pauses the conference automatically if the
system is switched on and sends alarm signals to conference
units
3.33
HCS-5300 Series Digital Infrared Wireless Conference System
■
6 digital infrared transceiver interfaces, each interface can
connect 4 transceivers if operating distributor HCS-5352, thus
each main unit can connect up to 24 transceivers
■
Power supply socket
■
HF signal output interface (BNC socket) for connection to
HCS-5100T Digital Infrared Radiator
■
RS-232 interface for connection to central control system
Technical Specifications
Electrical
Frequency response
20 Hz to 20 kHz (-3dB)
≥80 dBA
SNR
Dynamic range
≥80 dB
THD at 1 kHz
≤0.05%
Isolation
≥80 dB
Power supply
America, Japan
AC 110 V ~ 120 V, 60 Hz
Asia, Europe
AC 220 V ~ 240 V, 50 Hz
Max. 160 W
Power consumption
Audio inputs
LINE IN 1
+10 dBu, BAL.
LINE IN 2
+10 dBu, UNBAL.
Audio outputs
LINE OUT 1
+20 dBu, BAL.
MIC. MIX (1~4) OUTPUT
+20 dBu, BAL.
Interface data
Transceivers I/O terminal
6P-DIN socket × 6
RS-232 D-sub (9P, male),
External control terminal
USB interface,
RJ-45 (ETHERNET)
BNC connector × 1
HF OUT (Radiator terminal)
Alarm terminal
3.81 mm Phoenix connectors, 2-pole
Video switcher terminal
3.81 mm Phoenix connectors, 4-pole
Mechanical
Mounting
Tabletop or mounted in a 19" rack
Dimensions (h x w x d)
For table use, with feet
99 x 430 x 325 mm
For 19" rack use, with brackets
89 x 478 x 350 mm
Weight
8.3 kg
Color
White
Ordering Information
HCS-5300MC/20
Digital IR Wireless Conference
System Main Unit (discussion)
3.34
HCS-5300 Series Digital Infrared Wireless Conference System
System Connection [Wireless discussion + video tracking + central control]
Function list
Type No.
Discussion
Voting
Simultaneous interpretation
HCS-5300MA/20
√
√
1+3 CHs
HCS-5300MB/20
√
HCS-5300MC/20
√
1+3 CHs
3.35
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300BAT
Lithium Rechargeable Battery Pack
HCS-5300HT-BAT
Lithium Rechargeable Battery Pack
Features
Features
■
■
■
Lithium rechargeable battery pack
■
Used for supplying power to HCS-5300HT Portable Digital IR
transmitter
Lithium rechargeable battery pack
Used for supplying power to HCS-5300 series digital infrared
wireless conference unit
Technical Specifications
Electrical
Technical Specifications
Nominal voltage
Nominal capacity
Electrical
Nominal voltage
11.1 V DC
Nominal capacity
4400 mAh
Mechanical
Dimensions (h x w x d)
Weight
Mechanical
Dimensions (h x w x d)
Weight
Color
7.4 V DC
2200 mAh
Color
28 × 140 × 58 mm
20 × 70 × 38 mm
0.1 kg
Blue
0.32 kg
Black
Ordering Information
HCS-5300HT-BAT
Ordering Information
HCS-5300BAT
Lithium Rechargeable Battery Pack
3.36
Lithium Rechargeable Battery Pack
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-ADP15V
Power Adapter
HCS-5300CHG/08 Charging Unit
Features
Features
■
Used for supplying power to HCS-5300 series digital infrared
■
Used for charging HCS-5300BAT Lithium batteries
wireless conference unit
■
Charges 8 pcs of HCS-5300BAT batteries per charging
■
Uses universal power supply with automatic voltage matching
Technical Specifications
Controls and Indicators
Electrical
Mains voltage
Output
Connector
■
Power switch
AC 100 ~ 240 V, 50/60 Hz
■
Charging indicator (red)
DC 15 V, 2.2 A
■
Fully charged indicator (green)
UL, CE or VDE type, according to the territory of
selling
Interconnections
Mechanical
■
Power output interface
Cable length
3m
■
Power input interface
28 × 95 × 45 mm
■
Charging lattices
Dimensions (h x w x d)
Weight
0.3 kg
Color
Black
Technical Specifications
Electrical
Ordering Information
HCS-ADP15V
Mains voltage
Power Adapter (DC 15 V, 2.2 A)
America, Japan
AC 110 V to 120 V, 60 Hz
Asia, Europe
AC 220 V to 240 V, 50 Hz
Power consumption
Charging time
Charging capacity
Max. 380 W
Approx 6 hours
8 HCS-5300BAT batteries
Mechanical
Dimensions (h x w x d)
Weight
Color
74 × 288 × 300 mm
4.5 kg
White
Ordering Information
HCS-5300CHG/08
3.37
Charging Unit (8 pcs/case)
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5352
1×4 Cable Splitter
HCS-5300TZJ Tripod
Features
■
Has one in and four out structure
■
Each main unit has 6 digital infrared transceiver interfaces,
each interface can connect 4 transceivers if operating
distributor HCS-5352, thus each main unit can connect up to
Features
24 transceivers
■
Used
for
mounting
HCS-5300TD,
HCS-5300TDB
or
HCS-5300RB
Interconnections
■
4 × 6P-DIN sockets
■
1 m cable with 6P-DIN plug
■
Max. adjustable height: 1.4 m
■
Weight: 2.55 kg
Ordering Information
HCS-5300TZJ
Technical Specifications
Electrical
Voltage
Number of I/O terminals
33 V DC (supplied from HCS-5300M)
1 in / 4 out
Mechanical
Dimensions (h x w x d)
Weight
Color
35 × 149 × 90 mm
0.32 kg
Black
Ordering Information
HCS-5352 Cable Splitter (1 input & 4 outputs, for HCS-5300 series)
3.38
Tripod
HCS-5300 Series Digital Infrared Wireless Conference System
CBL5300
Dedicated Transceiver Cable
CBL5304
Dedicated Receiver Cable
Features
■
■
Dedicated cable for HCS-5300T series Digital Infrared
Transceiver
■
1 × 6P-DIN plug
■
1 × 6P-DIN socket
■
Ø 6 mm
■
Color: black
Dedicated cable for HCS-5300R series Digital Infrared
Receiver
Features
■
1 × 6P-DIN plug
■
1 × 6P-DIN socket
■
Ø 4 mm
■
Color: black
Ordering Information
CBL5304-05
5 m Dedicated Receiver Cable
Ordering Information
CBL5304-10
10 m Dedicated Receiver Cable
CBL5300-05
5 m Dedicated Transceiver Cable
CBL5304-20
20 m Dedicated Receiver Cable
CBL5300-10
10 m Dedicated Transceiver Cable
CBL5304-50
50 m Dedicated Receiver Cable
CBL5300-20
20 m Dedicated Transceiver Cable
CBL5300-50
50 m Dedicated Transceiver Cable
3.39
HCS-5300 Series Digital Infrared Wireless Conference System
System Connection
3.40
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5300 Series Application Software
HCS-5300 application software is comprehensive, reliable and
user-friendly. But it is also an easy care software system which
helps the operator to manage the conference efficiently from the
very beginning of a meeting until the post-meeting work. With the
PC installed HCS-5300 application software connected into the
FDCS, the operator can manage all aspects of the conference
centrally. The operation turns out to be easy and efficient.
HCS-5300 application software is a modularized software with
various functional modules:
■
Basic System Setup Management Module (HCS-5310/50)
■
Professional Venue Design Module (HCS-5312/50)
■
Microphone Management Module (HCS-5313/50)
■
Voting Management Module (HCS-5314/50S)
■
Video Control Module (HCS-5315/50)
■
Simultaneous Interpretation Module (HCS-5316/50)
■
Synchronous
Audio
Recording
Management
Module
Video
Recording
Management
Module
Control
Management
Module
(HCS-5319/50)
■
Synchronous
(HCS-5320/50)
■
Multi-user
Conference
(HCS-5321/50)
■
Dual PC Server Hot Spare Module (HCS-5322/50)
■
Agenda Control Module (HCS-5323/50)
3.41
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5310/50
Basic System Setup Management
Module
Main unit configuration facility
The Basic Software Module consists of an amount of facilities, e.g.
venue design (normal edition), conference management, main unit
configuration, contribution unit configuration, information display,
system report and user management.
Venue design facility
CMU parameters setup
Venue design (normal edition)
Functions
Converts the venue seating into an intuitive, graphical and
controllable interface as a basis for further use, according to the
Main unit control panel
actual layout of the venue
■
Self-designing the background picture and color, supporting
pictures of any size
■
Microphone number, amount of microphones per line, icon type
Functions
- icon transparency optionally
■
Freely drag and drop the microphone icon
■
Reconfiguration of the initialized settings, available at any time
■
Save/open files for file management
■
Especially suitable for small-scale and medium-sized meeting
Module provides CMU parameters setup and CMU control panel
sub-modules.
■
CMU parameters setup:
™ Chairman priority mode: enable All off or All mute operation
when chairman presses priority button
room/hall. The professional edition of venue design module
ƒ All off: turn off all delegate microphones
ƒ All mute: temporarily mute all delegate microphones; the
offers more facilities described in HCS-5312/50 Professional
Venue Design Module
former state is restored once the button released
™ Ring mode: turn on/off all kinds of ring tones of conference
units triggered when pressing priority button
™ Automatically turn off microphone time: the microphone will
be automatically switched off after a period of silence and
the period shall be setup
™ Compression setup: Setup dynamic range compression
parameters. Function: when the sound pressure is
exceeding the compression threshold value, the gain level
for the audio signal will be reduced by a given ratio
3.42
HCS-5300 Series Digital Infrared Wireless Conference System
■
Contribution unit configuration facility
CMU control panel: synchronously display and adjust the
status of the conference main unit, for flexible control of the
CMU by the operator
™ Active Microphones (1/2/3/4)
™ Operation mode (OPEN/OVERRIDE/APPLY)
™ Original floor channel volume of the contribution unit (dB)
™ Original floor channel treble of the contribution unit (dB)
™ Original floor channel bass of the contribution unit (dB)
™ Line-in volume (dB)
™ Line-in mute
Conference information management
Setup contribution unit interface
Functions
Setup and reconfigure internal parameters of the contribution unit
by the administrator.
Parameters include:
■
Select contribution unit to setup
■
Gain of the contribution unit (dB)
■
Treble of the contribution unit (dB)
■
Bass of the contribution unit (dB)
Conference information
User management
Functions
Comprehensive conference information management facility, for
clear and easy user management.
■
Includes conference name and meeting information
■
Each conference consists of several meetings
■
Creation of a new meeting for appointed conference
■
Meeting:
™ Meeting content: meeting name, meeting room name,
meeting start time, sign in mode, quorum and conference
content
™ Display of convoked meetings in distinct colors
™ Locking a convoked meeting for meeting data protection
■
Freely switch between the meetings to manage
User management interface
Functions
Create/delete a user, change user password and authorization
■
Create a new user, and set his/her account, password,
authority
3.43
■
Change user's password and authorization
■
Supports deleting a user
HCS-5300 Series Digital Infrared Wireless Conference System
Information display
Report system
Screen management
Report system
Functions
Functions
Include screen management: design of a screen and its related
Conference information output from the software's database, for
activated event.
backup or printout purposes. The conference information includes:
■
Set distinct screen projects for distinct conferences and
■
Conference information
languages
■
Proposal list
Predetermination of screen page contents: includes page color,
■
Delegate information
page name, page size, etc.
■
Sign-in report
Editing screen page contents: includes add text, picture,
■
Voting result
delegate’s photo, voting results, etc.
■
Summarizing voting results
Select the page to display when conference event starts. Each
■
More reports
■
■
■
conference event corresponds to a particular screen page
■
Allocation of an alias for each screen for more convenience
Ordering Information
HCS-5310/50
3.44
Basic System Setup Management Module
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5312/50
Professional Venue Design Module
■
Powerful “object properties” function: object attribute can be set
and changed, including:
™
Set group name and object name
™
Set unique ID and ID display mode for every object,
supporting different fonts and sizes
™
Set starting object status
™
Set a radian for the object group and design seat layout
according to true seating positions
™
Set start index of the object group
™
Change the amount of the units in an object group
™
Set numbering increment
™
Set initial background color and whether transparent or not
™
Set start and end coordinates of object group
■
Object ID check facilities
■
Support object copy, cut, paste and delete operation
■
Object arrangement can be changed
Venue design (professional)
Ordering Information
Functions
HCS-5312/50
Unlike the normal edition of the Venue Design Module, the
professional version has additional powerful functions to design
manifold layouts of venues. The main difference is the availability of
functional buttons for file operation (toolbar buttons) and object
operation (buttons below toolbar buttons) in the toolbars. In addition,
the functions are also available in the file right-click pop-up menu.
Moreover, the Object Properties dialog box is floating on the
window for fast changing the properties of current object.
■
File operation:
™ Venue design supports file operation, including: new, open,
save as, and print
™ Create a new conference file: set the background color,
room size and other parameters, including:
ƒ Background
ƒ Line number
ƒ Amount per line
ƒ Seat icon
ƒ Seat direction
ƒ Transparent icon or not
ƒ Show as MIC. icon or not
ƒ Re-arrange seat position or not
™ The parameters above can be changed at any time through
“Configuration” menu on the toolbar
™ Add seat/microphone icons line by line, 8 seats/
microphones per line as default value. The amount of
seats/microphones per line can be modified. While the
normal edition can add only one seat at one go, the
professional venue design module can add groups with
more than one seat/microphone per group
■
™ Shifting facility for complete layout
Define object:
™ Picture library with default (customized and/or recurrent)
objects
™ Modifiable object information, e.g. object name, image path,
distinguishable colors for displaying object images in
different states (e.g. signed-in etc.)
3.45
Professional Venue Design Module
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5313/50
Microphone Management Module
Functions
Seat arrangement, delegate management and microphone
control sub-modules
■
Seat arrangement facility includes delegate seating and unit
arrangement function modules
™ Delegate seating is used to assign seats for the delegates,
e.g.:
ƒ Assign a single seat for each delegate
ƒ Section seating, automatic seat assignment for a group
of delegates, supports new assignment – in parts or
entirely
ƒ Clear a single seat if required for a new assignment
™ Unit arrangement: assign the conference units to the
corresponding positions based on the true delegate seating,
current cabling and layout:
ƒ Unit arrangement, assign the conference units to the true
delegate seating
Unit arrangement
ƒ Delete unit, reassign the units
ƒ Locate seat position by menu operation
■
ƒ Operate the arranged units to check the arrangement
Delegate management includes two sub-modules: delegate
information and participants
™ Delegate information: create and manage the delegate’s
database
ƒ Edit delegate information: number, type, name, voting
weight, leader (yes or no), presidium (yes or no) etc.
Supports individual picture in the database
ƒ Users can customize the options in the above items
ƒ Customer-specific options for above items
ƒ Supports customized delegate grouping
ƒ Fast search facility
ƒ Database updatable
™ Participants: select the delegates to participate in the
conference from the database
Delegate information
ƒ List delegate information by group or by delegate type
ƒ Group adding function
■
Microphone control: combined with venue design, seating
arrangement, delegate management, conference management
and microphone setup, for controlling and monitoring current
microphone status, as well as automatic video tracking. Facility
includes:
™ Microphone on/off control
™ Close all active microphone
™ Delegate speech timing
™ Record and save speaking
™ Detailed information available from the delegate database
for online display purposes
™ If cooperating with an automatic video tracking system,
camera presets can be made for each discussion unit to
transmit speaker’s picture simultaneously to a hall display
Microphone control
Ordering Information
HCS-5313/50
3.46
Microphone Management Module
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5314/50S
Voting Management Module
Delegate information
Topics and voting
Functions
Voting
management,
seat
arrangement
and
delegate
management sub modules.
■
Voting management:
™ Topics information management
ƒ Setup, save, add or delete topics file before the meeting
ƒ Open topics control interface and display topics content
to large screen
ƒ Printout the topics list and information and distribute to
delegates as meeting information
ƒ Multiple voting facilities available, suitable for various
conferences, including:
Display voting result
—
Parliamentary: YES/NO/ABSTAIN
—
Questionnaire: 1/2/3/4/5
— Audience response: --/-/0/+/++
ƒ Calculation: predefined or in relation to the participants
attending the meeting in person
ƒ Register mode: nominative/ballot
ƒ Validity mode: first key press valid/last key press valid
ƒ Pass rate: between 1% and 100%
™ Display voting result to large screen
and
vivid
voting
result
™ Clear
display
modes
(numeric/bar/pie)
™ Print or save voting result
™ Sign-in before the voting to improve the security and validity
of voting result
Unit arrangement
3.47
HCS-5300 Series Digital Infrared Wireless Conference System
■
HCS-5315/50 Video Control Module
Seat arrangement facility includes delegate seating and unit
arrangement function modules
™ Delegate seating is used to assign seats for the delegates,
e.g.:
ƒ Assign a single seat for each delegate
ƒ Section seating, automatic seat assignment for a group
of delegates, supports new assignment – in parts or
entirely
ƒ Clear a single seat if required for a new assignment
™ Unit arrangement: assign the conference units to the
corresponding positions based on the true delegate seating,
current cabling and layout:
ƒ Unit arrangement, assign the conference units to the true
delegate seating
ƒ Delete unit, reassign the units
ƒ Locate seat position by menu operation
■
ƒ Operate the arranged units to check the arrangement
Delegate management includes two sub-modules: delegate
Video matrix
information and participants
™ Delegate information: create and manage the delegate’s
database
ƒ Edit delegate information: number, type, name, voting
weight, leader (yes or no), presidium (yes or no) etc.
Supports individual picture in the database
ƒ Customer-specific options for above items
ƒ Supports customized delegate grouping
ƒ Fast search facility
ƒ Database updatable
™ Participants: select the delegates to participate in the
conference from the database
ƒ List delegate information by group or by delegate type
ƒ Group adding function
Camera control
Ordering Information
HCS-5314/50S
Functions
Voting Management Module
Carries out automatic video tracking when cooperating with camera
and video switch unit.
■
Setup video matrix: set input/output channels for computer,
camera
and
other
video
apparatus
according
to
the
connections between video equipment and video switch unit.
The configuration can be sent to the main unit for
synchronization
■
Video switch: switch among different input and output video
signals according to the video matrix
■
Camera preset: cooperating with microphone management
module to set and adjust the camera preset for each
seat/microphone and to transmit speaker’s video picture
simultaneously to a hall display
■
Camera control: preset the panorama of the conference venue
Ordering Information
HCS-5315/50
3.48
Video Control Module
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5316/50
Simultaneous Interpretation Module
HCS-5319/50
Synchronous Recording Module
Interpretation channel setup
Voice record interface
Functions
Setup the simultaneous interpretation channels:
Functions
■
Simultaneous interpretation channel setup:
Records speakers’ audio information:
™ Set the channel number and language for each channel and
save into the database
■
™ Set max. input level of each channel
■
software, easy to operate
™ Send the configuration to the main unit for synchronization
■
Integrated into TAIDEN conference management application
Automatic recording:
™ Begin/end automatic recording according to microphone
Display main unit configuration on the window
on/off
™ Setup record audio quality
™ Once microphone enabled, speaking delegate's voice is
recorded in audio file (WAV or MP3 format)
Ordering Information
HCS-5316/50
™ Saved audio file available for copying, playback, etc.
™ When using automatic recording function, the number of
Simultaneous Interpretation
active microphones is limited to one
Module
■
If automatic audio recording is not activated, operator manually
starts/stops recording. Record file name display
■
Audio playback:
™ Integrated file management
™ Search facilities, search audio record file needed to
playback quickly (by conference ID, speaker, begin time,
continuous time, etc.)
™ “Playback All”: recordings playback one by one
™ Recorded file playback, fast play, pause/stop etc.
™ General file format saving: saved file playback by
conventional media player
™ Delete any recorded file or all recorded files
Ordering Information
HCS-5319/50 Synchronous Audio Recording Management Module
3.49
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5320/50 Professional Digital
Video & Audio Recorder Module
■
Includes layout, preview, record, connect DCS, DVR control,
capture, playback, setup system parameters, setup channel
parameters and DVR channel list functions
™ Layout: setup layout of video preview sub screen –
selection of 1, 4, 6, or 8 video preview sub screens
™ Preview: preview video/audio signal of each channel
™ Record: start/stop record for selected channel
™ Connect DCS: connect to DCS server and DCS backup
server, ensuring an undisturbed recording process
™ DVR control: control DVR
™ Capture: capture a picture for selected sub screen
™ Playback:
ƒ Select channel number for playback – select anyone or
all
ƒ Select file content for playback: panorama, video track,
simultaneous interpretation and other
ƒ Select file type for playback: including all files, remote
files, local video files and local pictures (local = on PC)
Preview interface
ƒ Search facility: search a video for playback by meeting ID,
speaker name, speaking time, etc.
ƒ Play Control: fast play, pause/stop, etc.
™ Setup system parameters:
ƒ Set display format (e.g. sampling rate) for audio and
video
ƒ Set DVR parameters
™ Setup channel parameters: set video and audio content
for each channel, and record automatically according to
conference status
ƒ Video content:
—
Video track: start record when microphone is turned
on and stop record when microphone is turned off
—
Panorama: start record when conference begins and
stop record when conference ends
Setup channel parameters
—
Other: start/stop record manually by operator
—
Simultaneous
interpretation:
connect
SI
output
channel of DCS to input channel of DVR, and select
language for recording manually
ƒ Audio content
ƒ Stream type: video only or video & audio composite
Functions
TAIDEN conference synchronous digital video & audio recorder
integrates several techniques in the IT domain and realizes
—
Video only: record only video signal
—
Video & audio: record video and audio composite
signal
powerful video/audio compressing, video/audio recording and
playback functions.
■
Display of channel states, alarm states, connection status and
DVR parameters (brightness, contrast, hue and saturation)
Ordering Information
HCS-5320/50 Synchronous Video Recording Management Module
3.50
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5321/50
Multi-User Console Module
HCS-5322/50
Dual PC Server Hot Spare Module
Start to backup interface
The primary window of multi-user console
Functions
Functions
HCS-5322/50 dual PC server hot-spare is a disaster protective
If more than one operator is involved, a multi-user console is
structure. If the main operating computer breaks down during a
conference, the backup computer immediately substitutes the main
available for controlling speaking and voting, apart the system
computer and continues conference management.
application software. A maximum of 5 multi-user consoles can be
After connection to main operating computer, the backup console
connected at the same time.
application first starts an automatic backup (incl. database and
Basic conference control module:
■
Microphone control
■
Sign-in management
■
Voting management
■
Connect Server
■
System parameters setup and download venue files from the
conference related information). If there is any change in the
database, the backup console application will update backup
automatically.
server
Ordering Information
HCS-5322/50
Ordering Information
HCS-5321/50 Multi-User Conference Control Management Module
3.51
Dual PC Server Hot Spare Module
HCS-5300 Series Digital Infrared Wireless Conference System
HCS-5323/50
Agenda Management Module
Agenda information
Functions
Agenda is a list of meeting activities in the order in which they are to
be worked off. The agenda is prepared beforehand. It may include
sign-in, voting and discussion. Agenda edit prepares all activities
and their sequence to ensure convenience and a well arranged
course of events. Agenda Management module consists of agenda
information management and agenda control sub modules.
■
Agenda information management: edit agenda content and
sequence
™ Includes agenda name, agenda type and activity
™ Sequence of each activity can be adjusted - user can add,
modify, delete an activity
■
Agenda control: control the meeting process according to the
pre-defined agenda content and sequence
™ Select an agenda from the agenda list and execute it
™ List the status of each agenda
™ Agenda can be edited, added, modified, or deleted during
the meeting
Ordering Information
HCS-5323/50
Agenda Control Module
3.52
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement