Trendnet TEW-645UB High Power Wireless N USB Adapter Quick Installation Guide
Advertisement
Advertisement
Quick Installation Guide
TEW-645UB
H/W: V1.0R
Español .....................................................................................................
1. Antes de iniciar .................................................................................
2. Cómo se instala ................................................................................
3. Configuración inalámbrica ................................................................
Troubleshooting ........................................................................................
1
1
2
6
7
Version 07.24.2008
1. Antes de iniciar
Contenidos del paquete
herramienta
Requisitos del sistema
(Windows Vista)
Aplicación
High Power Wireless N USB Adapter
(TEW-645UB)
Notebook with
Wireless N PC Card
(TEW-641PC)
Wireless N Home Router
(TEW-652BRP)
Desktop
Wireless N Speed
Notebook
1
Español
2. Cómo se instala
¡Importante! NO conecte el adaptador USB inalámbrico a su PC a menos que se le indique.
1. Introduzca el CD-ROM del
controlador y de la herramienta en la unidad de CD-ROM de su
PC.
2. Haga clic en Run Setup.exe
(sólo para Windows Vista).
3. Haga clic en Install Utility
(Instalar herramienta).
4. Haga clic en Next. Y Siga las instrucciones del InstallShield
InstallShield Wizard (Asistente de
Install Shield).
2
Español
5. Haga clic en Install this driver
software anyway (Instalar el software de este controlador de todas formas) (Windows Vista).
6. Haga clic en Continue Anyway
(Continuar de todas formas).
7. Haga clic en Yes (Sí).
(Windows 2000).
8. Haga clic en Finish (Finalizar).
3
Español
9. Conecte el TEW-645UB a la base.
10. Conecte el adaptador inalámbrico a un puerto USB disponible de su
PC.
Nota: Para Windows XP, vaya al paso 12. Para Windows 2000,
16. Para Windows Vista, prosiga con el paso 11.
Windows Vista
11. Los archivos controladores se
instalarán automáticamente.
Windows XP
12. Le aparecerá la ventana Found
New Hardware (Nuevo hardware encontrado). Seleccione No y haga clic en Next (Siguiente).
13. Seleccione Install the software
automatically (Instalar el software automáticamente) y luego pulse Next (Siguiente).
4
Español
14. Haga clic en Continue Anyway
(Continuar de todas formas).
15. Haga clic en Finish (Finalizar).
Windows 2000
16. Haga clic en Yes (Sí).
La instalación ha sido completada
Si desea más información sobre la configuración del TEW-645UB y sus configuraciones avanzadas, por favor consulte la Guía del usuario del controlador y el CD-ROM de la Guía del usuario.
Registre su producto
Para asegurar los más altos niveles de servicio y apoyo al cliente, registre su producto en línea en:
www.trendnet.com/register
Gracias por elegir TRENDnet
5
Español
3. Configuración inalámbrica
Windows 2000/XP/Vista
1. En la esquina derecha inferior de la pantalla, haga doble clic en el icono wireless client utility
(herramienta para cliente inalámbrico).
2. Haga clic en Site Survey
(Inspección de sitio), seleccione el
SSID que corresponda a su punto de acceso inalámbrico y después haga clic en Connect (conectar).
La configuración inalámbrica ha finalizado
Para obtener información más detallada sobre la configuración así como de las configuraciones avanzadas del TEW-645UB, por favor consulte la sección de resolución de problemas, el CD-ROM de la Guía del Usuario, o el sitio Web de
Trendnet en http://www.trendnet.com.
Registre su producto
Para asegurar los más altos niveles de servicio y apoyo al cliente, registre su producto en línea en:
www.trendnet.com/register
Gracias por elegir TRENDnet
6
Español
Troubleshooting
Q1: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do?
A1:
For Windows 2000/XP, if the installation menu does not appear automatically, click Start, click Run, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard. For Windows Vista, if the installation menu does not appear automatically, click Start, click the Start Search box, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.
Q2: I completed all the steps in the quick installation guide, but my Wireless USB
Adapter is not connecting to my access point. What should I do?
A2:
First, verify that the Network Name (SSID) matches your wireless router or access point's Network Name (SSID). Second, please check with your network administrator for security key in order to access a secured wireless access point or router. Please refer to the User's Guide for more information regarding wireless network security. Third, check your TCP/IP properties to ensure that Obtain an IP address automatically is selected. Fourth, double-click the Wireless Client Utility icon, click Site Survey and then click Refresh to check and see if there are any available wireless networks listed.
Q3: Windows is unable to recognize my hardware. What should I do?
A3:
Make sure your computer meets the minimum requirements as specified in
Section 1 of this quick installation guide. Also, you must complete the installation of the wireless configuration utility (as described in Section 2) before connecting the Wireless USB Adapter to your computer. Lastly, you may consider moving the
Wireless USB Adapter to a different USB port of your computer.
Q4: I cannot open the Wireless Client Utility. What should I do?
A4:
Access your device manager to make sure the adapter is installed properly. If you see a networking device with a yellow question mark or exclamation point, you will need to reinstall the device and/or the drivers. To access the device manager on Windows 2000/XP, right-click My Computer, click Properties, click the
Hardware tab, and then click Device Manager. To access the device manager on
Windows Vista, right-click Computer, click Properties and then click Device
Manager.
If you still encounter problems or have any questions regarding the TEW-645UB, please refer to the User's Guide included on the Utility & Driver CD-ROM or contact
TRENDnet's Technical Support Department.
7
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause undesired operation.
Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
20675 Manhattan Place
Torrance, CA 90501
USA
Copyright ©2008. All Rights Reserved. TRENDnet.

Public link updated
The public link to your chat has been updated.
Advertisement