DRAFT MANUAL

4 by 1 Optical Audio

Switcher with IR Remote

Operation Manual

DCT-17

Disclaimers

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.

Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.

Copyright Notice

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual, or otherwise - without express written permission and consent from

Cypress Technology.

© Copyright 2009 by Cypress Technology.

All Rights Reserved.

Version 1.0 October 2009

Trademark Acknowledgments

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:



Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.



To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.



Never spill liquid of any kind on or into this product.



Never push an object of any kind into this product through module openings or empty slots, as you may damage parts.



Do not attach the power supply cabling to building surfaces.



Do not allow anything to rest on the power cabling or allow it to be abused by persons walking on it.



To protect the equipment from overheating, do not block the slots and openings in the module housing that provide ventilation.

Revision History

Version No Date Summary of Change

V1

20100802 Preliminary Release

Table of Contents

1. Introduction ..................................................................................1

2. Applications .................................................................................1

3. Package Contents ......................................................................1

4. Features ........................................................................................1

5. Specifications ..............................................................................2

6. Operation Controls and Functions .............................................3

7.3 Top Panel ..................................................................... 3

7.1 Right Panel ................................................................... 3

7.2 Rear Panel .................................................................... 4

7. Connection and Installation .....................................................5

1. Introduction

The 4 by 1 Optical Audio Switcher is a device with four optical inputs and one optical output. This device allows users with multiple optical sources connection for one output display. All signal are bypass and without delay or configuration.

The device is built with last memory function and IR remote control which ease users with friendly using.

2. Applications

• Multi-selection audio performance

• Optical audio signal display

• Theater performance

• Audio showroom control

3. Package Contents

• 4 by 1 Optical Audio Switcher

• IR Remote Control

• 5V / 1A Power Adaptor

• Operation Manual

5. Features

• Optical sampling rate supports up to 192 kHz

• Low power consumption

• up to 24 bit resolution

1

6. Specifications

Input Ports

Sample Frequency

Output Port

Audio Format

Power Supply

ESD Protection

Dimensions(mm)

4 x Optical

Up to 192 kHz

1 x Optical

PCM2, AC3/5.1, Dolby 5.1 & DTS 5.1 pass through

5V / 1A DC ( US/EU standards, CE/FCC/UL certified)

Human body model: ± 8kV (air-gap discharge)

± 6kV (contact discharge)

100 (W) x 70 (D) x 20(H)

Weight(g)

Chassis Material

90

Plastic

Silkscreen Color Black

Operating Temperature 0°C~40°C / 32°F~104°F

Storage Temperature -20°C~60°C / -4°F~140°F

Power Consumption <1W

Relative Humidity 20 ~ 90% RH (non-condensing)

2

7. Operation Controls and Functions

7.1 Top Panel

1

①

Input 1~4: The LED will illuminate in blue when selected the source.

1

1

Optical In: These slots are to connect with input source equipments such as DVD/Blue-Ray player for audio input signal sending.

3

7.2 Left Panel

1 2 3 4

①

Power: Press this button to turn on the device or to set it to standby mode. The blue LED on the top panel will illuminate when the device is turn on.

②

Input: Press this button to select the input port from 1~4. The blue LED on the top panel will illuminate according to the selection.

③

Optical OUT: This slot is where you connect the amplifier or active speaker with optical cable for audio output.

④

IR: This is the IR receiver window receiving IR signal from the remote control included with the device.

7.3 Rear Panel

1

①

DC 5V: This slot is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet.

4

8. Connection and Installation

DVD Blu-ray

Active Speaker Amplifier

5

Acronyms

Acronym Complete Term

A

6

7

CYPRESS TECHNOLOGY CO., LTD.

Home page: http://www.cypress.com.tw

MPM-DCT17