MANUAL_Antik MR 9200/9400 Multireceiver

MANUAL_Antik MR 9200/9400 Multireceiver
Digital Modular Headend Bank
MR9200/MR9400
USER MANUAL
2015/05
MR9200/MR9400
Digital Modular Headend Bank
Contents
4
Chapter I. OVERVIEW
4 1.1
Characteristics
6 1.2
Order Information
6
1.2.1
MR9200P Series
6
1.2.2
MR9400P Series
7
Chapter II. CONTROL WITH DISPLAY AND KEYPAD
7 2.1
MR9200EC
9 2.2
MR9400P
10
Chapter III. CONTROL WITH WEB SERVER
10
3.1 MR9400P Decoder Module
10
3.1.1
Status Menu
11
3.1.2
Tuner
12
3.1.3
CI
12
3.1.4
Decoder
12
3.1.4.1 Audio
13
3.1.4.2 Video
14
3.1.4.3 Decoder Play
14
3.1.5
Output
15
3.1.6
BISS
15
3.1.7
UX
16
3.1.8
IP Out
18
3.1.9
IP In
19
3.1.10
Backup
19
3.1.11
System
19
3.1.11.1 Device
20
3.111.2 Version
20
3.1.11.3 Network
21 3.2
MR9200P/MR9400P Decoder Module
Brighten your digital view!
21
3.2.1
Status Menu
22
3.2.2
Input Menu
22
3.2.3
Output Menu
23
3.2.3.1 ASI Output
23
3.2.3.2 ASI2/SDI
23
3.2.3.3 Decoder Play
24
3.2.3.4 Decoder Config
25
3.2.4
CI
26
3.2.5
IP Out
28
3.2.4
IP In
28
3.2.5
System
30
3.3
MR9400EC Encoder Module
30
3.3.1
Status
31
3.3.2
Encoder
32
3.3.3
Transcoder
34
3.3.4
IP In
35
3.3.5
IP Out
36
3.3.6
Output
36
3.3.7
MUX
37
3.3.8
System
38
Chapter IV. TECHNICAL SPECIFICATION
38 4.1
MR9200P Seriese
41 4.2
MR9400P Series
45 4.3
MR9400EC Series
47
Chapter V. DEFAULT DEVICE PARAMETERS ON DELIVERY
47 5.1 MR9400P
49 5.2 MR9200P
51 5.3 MR9400EC
MR9200/MR9400
Digital Modular Headend Bank
1. OVERVIEW
1.1 Characteristics
MR100 is a compact modular digital TV headend that includes professional MPEG-2 and MPEG4 AVC/H.264 SD/HD IRD, MPEG-2 and MPEG-4 AVC/H.264 SD/HD Encoder/Transcoder,
Re-Multiplexer, QAM/COFDM Trans-Modulator, Dual Channel Analog Modulator, DVB Scrambler
and so on. Within a space saving 4Ux19” chassis, it provides 8 slots for any type of modules and
redundant power supply units. With flexible solution and the high density, MR100 offers operators
the advanced headend architectures in the marketplace for delivering analog and digital broadcast services to their subscribers. Coming with more new modules, MR100 is most suitable for
future multiple network architectures: streaming and multiplexing of digital content over IP based
networks and conversion of digital content for analog networks.
Main Feature
lDVB-S2/S, DVB-S, DVB-C, DVB-T2/T IRD modules with CI
lDVB-S/S2T/T2 to DVB-C QAM and DVB-T COFDM trans-modulator module
lMPEG-2, H.264 HD/SD encoder and trans-coder module
l8 Wayre-multiplexer module
lDVB Simulcrypt, BISS-1, BISS-E scrambler module
lRich interface with ASI, IP, SDI, YPbPr, CVBS, XLR
lWeb, SNMP Remote Controlor handheld programmer unit local control
l4RU 19” chassis compact modular design, supporting up to 8 modules
lFunctional module hot-swappable
lRedundant power supply
lIntelligent cooling system with temperature
lStand alone function of each module
lCost-saving by backward compatible with new modules
lOn site software update through IP
MR100MF Main Chassis
lStandard4 RU chassis with 8 slots for functional modules and 2 slots for Power Supplies
lHot-swappable power supply unit
lIntelligent cooling system with Temperature
lWall mounted or Rack mounted
lBackwardc ompatible with new modules
lPower Supply: AC 100V-260V, 50-60Hz
lOptional Build-in IPS witch
lDimension: L=340mm, W=483mm, H=178mm (4U)
4
www.antiktech.com
Brighten your digital view!
MR100CU Handheld Programmer Unit
l2 x 20 LCD display screen and 6-key keypad
lNo external power or battery needed
lEasy and quick on site system configuration without PC
lBackward compatible with new modules
lDimension 170 × 70 × 22 mm
MR9200P Series
Professional MPEG-2 SD IRD and Processor Module
lMultiple inputs DVB-S2/S/C/T, TS/IP and ASI
lSD MPEG-2 MP@ML digital Video decoding
lFlexible built-in re-multiplexing between ASI, Tuner and TS/IP Inputs
l2x DVB-CI Slots, Multi Programs, BISS-1 and BISS-E decryption
lDynamic PMT detection and automatic updating
lUDP, RTP Multicast / Unicast IP output, supports up to 32 independent channels
lPCM audio embedded in SDI output
lRemote Control and Supervision by SNMP, HTTP WEB and Proprietary HDMS software
lRSSI, received Eb/No & BER monitoring
lOn Site software update through IP
MR9400 Series
Professional Multi-format HD/SD IRD and Processor Module
l Multiple inputs DVB-T2/S2/S/C/T/T2, TS/IP and ASI
l Redundant inputs between Tuner, ASI and TS/IP
l SD/HD MPEG-2 and MPEG-4/H.264 digital Video decoding
l Digital Audio decoding and loop through via SDI, HDMI and AES-EBU
l Multiple Analog and Digital Outputs, ASI, CVBS, YPbPr, HDMI, SD/HD-SDI, TS/IP
l Flexible re-multiplexing between 2xASI, Tuner and TS/IP Inputs
l 2x DVB-CI Slots, Multi Programs, BISS 1 and BISS E decryption
l Dynamic PMT detection and automatic updating
l Support VBI TELETEXT, EBU/ DVB Subtitle, Closed Caption
l UDP/RTP & Unicast/Multicast SPTS and MPTS over IP I/O
l Remote Control and Supervision by SNMP, HTTP WEB and Proprietary HDMS software
l PCM audio embedded in SDI output or PCM audio over HDMI
l PCM output on two AES/EBU output port
l On Site software update through IP
l RSSI, received Eb/No & BER monitoring
5
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
MR9200EC Series
Professional H.264 SD Encoder/Trans-coder Module
MR9400EC Series
Professional H.264 HD Encoder/Trans-coder Module
l Multiple video resolution including 1080i, 720p, 576i and 480i
l Multiple inputs HDMI, HD/SD-SDI, YPbPr, and CVBS for encoding
l ASI Input for Trans-coding
l Support 10/100M TS/IP SPTS and MPTS
l Built-in re-multiplexer for encoder loop
l Support VBR and CBR encoding mode
l Digital audio pass through for trans-coding
l Support 2 pairs of analog stereo audio encoding with optional extension board
l Remote Control and Supervision by SNMP, HTTP WEB and Proprietary HDMS software
1.2 Order Information
1.2.1 MR9200P Series
MR-xxxx-xx
Model
Interface
MR9200P-S
MR9200P-S2
MR9200P-C
MR9200P-T
MR9200P-44S
MR9200P-44S2
MR9200P-44C
MR9200P-44T
-S
-S2/S
-C
-T
-S
-S2/S
-C
-T
•
•
•
•
•
•
•
•
x2
x2
x2
x2
x2
x2
x2
x2
Built-in Re-mux
•
•
•
•
•
•
•
•
ASI Output
•
•
•
•
•
•
•
•
SDI
•
•
•
•
•
•
•
•
Audio L/R
•
•
•
•
•
•
•
•
CV BS
•
•
•
•
•
•
•
•
TS/IP (Max. 6 SPTS or
MPTS output)
•
•
•
•
•
•
•
•
Tuner
ASI Input
Common Interface
TS/IP (Max. 32 SPTS or
MPTS output)
1.2.2 MR9400P Series
MR-xxxx-xx
Model
Interface
MR9400P-30S2
MR9400P-30C
MR9400P-30T
MR9400P-30T2
MR9400P-44S2
MR9400P-44C
MR9400P-44T
MR9400P-44T2
-S2/S
-C
-T
-T2
-S2/S
-C
-T
-T2
•
•
•
•
•
•
•
•
x2
x2
x2
x2
x2
x2
x2
x2
Tuner
ASI Input
Common Interface
Built-in Re-mux
ASI Output
HDMI
SDI
•
•
•
•
•
•
•
•
x2
x2
x2
x2
x2
x2
x2
x2
•
•
•
•
•
•
•
•
x2
x2
x2
x2
x2
x2
x2
x2
Y Pb Pr
•
•
•
•
•
•
•
•
Audio L/R
•
•
•
•
•
•
•
•
CVBS
•
•
•
•
•
•
•
•
TS/IP (Max. 32 SPTS
or MPTS output)
6
www.antiktech.com
Brighten your digital view!
1.2.3 MR9400EC Series
MR-xxxx-xx
Model
Interface
MR9200EC
MR9400EC
•
HD-SDI Input
•
SD-SDI Input
HDMI Input
•
•
Y Pb Pr
•
•
CVBS
•
•
ASI Input
•
•
Built-in Re-mux
ASI Output
TS/IP I/O
•
•
x2
x2
•
•
2. CONTROL WITH DISPLAY AND KEYPAD
2.1 MR9200EC
Main-Menu
Input Setup
Encoder
Setup
Sub-Menu
Description
Input ASI Bit Rate
Input ASI Bit display
Encoder Bit Rate
Encoder Bit display
Video Input Format
Video Input Format display
Work Mode
Work Mode: Encode/Transcode
Encode Start Out
Encode Start Out: Enter=Yes,Exit=No
Video Setup
Video Rate Ctl: Cbr/Vbr
Mode:
Audio Setup
Audio1 Format: MPEG1 Layer2
Audio1 Bit Rate: 32/48/56/64/80/96/112/128/160/192/224/256/320/384
Audio1 Channel: Stereo/Mono
Audio1 Level: 0~63
Audio1 Input Source: HDMI Audio/Composite2 Audio /Composite2 Audio /SDI
Audio
Audio1 SDI EMB:EMB1/EMB2/EMB3/EMB4
Audio2 Bit Rate: 32/64/128/192/256/384
Audio2 Channel: Stereo/Mono
Audio2 Level: 0~63
Audio2 Input Source: HDMI Audio/Composite2 Audio /Composite2 Audio /SDI
Audio
Audio2 SDI EMB:EMB1/EMB2/EMB3/EMB4
Encoder Bit Rate
Encoder Bit Rate:0~99999kB/S
Output PMT PID: Setting range 32-8191
Output Video PID: Setting range 32-8191
Output Audio PID: Setting range 32-8191
Advanced Setup
Output Program Num: Setting range 1-65535
Output PCR PID: Setting range 32-8191
PTS Time Set: Setting range 0-800.
Output Service Name: Edit Output Service Name
7
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
Work Mode
Work Mode: Encode/Transcode
Transcode Start Out
Transcode Start Out: Enter=Yes,Exit=No
Video Setup
Video Rate Ctl: Cbr/Vbr
Format:
Audio Setup
Audio1 Format: MPEG1 Layer2/AC3/MPEG2 AAC
Audio2 Format: MPEG1 Layer2/AC3/MPEG2 AAC
EC Audio2 Bit Rate: 32/64/128/192/256/384
EC Audio2 Channel: Stereo/Mono
EC Audio2 Level: 0~63
EC Audio2 Source: HDMI Audio/Composite1/ Composite2/SDI Audio
EC SDI Audio2:EMB1/ EMB2/ EMB3/ EMB4
Transcoder Bit Rate
Transcoder Bit Rate: 0~99999 Kb/s
Advanced Setup
Output Program Number : Setting range 1-65535.
Output PMT PID : Setting range 32-8191.
Output PCR PID : Setting range 32-8191.
Output Video PID : Setting range 32-8191.
Output Audio1 PID : Setting range 32-8191.
Output Audio2 PID : Setting range 32-8191.
Output Audio3 PID : Setting range 32-8191.
PTS Time Set: Setting range 0-800.
Output Service Name:Edit Output Service Name.
Transcode
Setup
Input Video Format
Output
Setup
IP Board
Setup(IP
Out)
Input Program List
Select Input Program
Transcoder Audio PID1
Select from 00258/01281
Transcoder Audio PID2
Select from 00258/01281
Out Channel
Out Channel Selection: Encoder Out/Mux Out/ASI Out
Output Bit Rate
Output Bit Rate: 0~99999Kb/s
IP Board IP Address
IP Board Address: 1.0.0.1~223.255.255.254
IP Board Net Mask
IP Board Net Mask: 1.0.0.1~223.255.255.254 and 0.0.0.0
IP Board Gateway
IP Board Gateway: 1.0.0.1~223.255.255.254 and 224.0.0.0~239.255.255.255
IP Board MAC Address
IP Board MAC Address
Protocol
Protocol: UDP/RTP
TS Pkts Per UDP
TS Pkts Per UDP: 1~7
Time To Live
Time To Live: 1~255
Type Of Service
Type Of Service: Min Delay/Max Reliability/Max Throughput/Min Monetary
Cost/Normal
Gate MAC Address
Gate MAC Address
Multicast 1
Multicast 2
Multicast 3
Multicast 4
Multicast 5
Multicast 6
8
www.antiktech.com
Multicast IP Address: 224.0.0.0 ~ 239.255.255.255
* When using Unicast, the Multicast IP Address should be set as the IP
address of the receiving device.
Multicast UDP Port: 1~65535
Target MAC Address
Mode: off/All pass/Filter/
Program List: H.264 Encoded
Brighten your digital view!
IP Board
Setup(IP
In)
PID
Processing
System
IP Board IP Address
IP Board Address: 1.0.0.1~223.255.255.254
IP Board Net Mask
IP Board Net Mask: 1.0.0.1~223.255.255.254 and 0.0.0.0
IP Board Gateway
IP Board Gateway: 1.0.0.1~223.255.255.254 and 224.0.0.0~239.255.255.255
IP Board MAC Address
IP Board MAC Address
Multicast Address
Multicast IP range: 224.0.0.0 ~ 239.255.255.255
* When using Unicast, the Multicast IP Address should be set as the IP address
of the receiving device.
Multicast UDP Port
Multicast UDP Port: 1~65535
Protocol
Protocol: UDP/RTP
Output Smoothing
Auto/Fixed rate/Disable
TS Bit Rate
TS Bit Rate: 0~99999Kb/s
Program List
Encoder/ASI Input:Select Encoder or ASI Input Program
Set TransportStream ID
Set TransportStream ID: 00008
MUX Output Bit Rate
MUX Output Bit Rate: 0~99999 Kb/s
MUX
MUX: Enter=Yes,Exit=No
Local Setup
IP Address: 1.0.0.1~223.255.255.254
Netmask: 1.0.0.1~223.255.255.254 and 0.0.0.0
Gateway: 1.0.0.1~223.255.255.254 and 224.0.0.0~239.255.255.255
MAC Address: Display MAC Address
Remote Setting
Trap IP Address: 0.0.0.0~255.255.255.255
Unit Name
Edit Unit name
Software Version
Display main Software Version
Extend Board Select
No Out Board/IP Out Board/IP In Board
Factory Settings
Enter: Yes,Exit: No
SN
Display serial number
Composite Audio Boost
Enable/Disable
Login ID
Edit Login ID
Login Password
Edit Login Password
2.2 MR9400P
Main-Menu
Sub-Menu
Description
Status
ASI: Display ASI input status
TUNER: Display tuner input status
IP IN: : Display IP input status
DVB-S2
LNB Frequency: Input LNB frequency
Satellite Frequency: Input downstream frequency of satellite
Symbol Rate: Input symbol rate of satellite
LNB Voltage: Off/13V/18 V
LNB 22KHz: 22KHz or Off.
DISQEC: Port A/Port B/Port C/Port D/DiSEQC OFF
PLS Gold Code: 0~5000
Frequency Offset High: 5000KHz
Frequency Offset Low: -5000KHz
QAM
Constellation: 16/32/64/128/256QAM/64B/256B
Frequency: Enter the frequency of the QAM signal in MHz.
Symbol Rate: Edit the symbol rate to the proper value in
KBaud.
COFDM
Frequency: Input terrestrial frequency.
Bandwidth: select bandwidth from 6Mhz, 7Mhz and 8Mhz.
RSSI
Tuner Status: Display tuner status
Strength Display: Display the strenth of tuner signal
9
www.antiktech.com
MR9200/MR9400
Ethernet
Digital Modular Headend Bank
Stream IP Addr: 1.0.0.1~223.255.255.254
Stream Netmask: 1.0.0.1~223.255.255.254 and 0.0.0.0
Stream Gateway: 1.0.0.1~223.255.255.254 and
224.0.0.0~239.255.255.255
Stream Mac Address: Display MAC address
Multicast IP Addr: Enter the IP address of the multicast
stream for the transport stream over IP.
Multicase UDP Port: Enter the UDP port number of the TS
over IP stream.
Protocol: UDP/RTP.
Output Smoothing:
- Auto: the bit rate is variable.
- Disable: the unit let the TS pass by.
- Fixed Rate: the bit rate is fixed.
- TS Bit Rate: set the bit rate of the TS comes from the TS/
IP input. The setting is only valid when the output smoothing
is configured as Fixed Rate.
3. CONTROL WITH WEB SERVER
To control the unit via Web server, type in the unit IP address in the web browser. Default
username and password are as following.
Username: root
Password: 12345
3.1 MR9400P Decoder Module
3.1.1 Status Menu
10
www.antiktech.com
Brighten your digital view!
Output Status
Video: Video status
Audio: Audio status
PMT PID: PMT PID Display
Program Number: Program Number Display
Audio PID: Audio PID Display
Video PID: Video PID Display
Input Status
ASI: ASI input status
Total Bitrate: Total bitrate of ASI input
Packet size: ASI input Packet size
Valid Bitrate: Valid bitrate of ASI input
Tuner: Tuner input status
Total Bitrate: Total bitrate of Tuner input
Packet size: Tuner input Packet size
Valid Bitrate: valid bitrate of tuner input
Strength: Tuner input intensity
C/N: Carrier noise of tuner input
BER: Bit error rate of tuner input
Eb/N0: Tuner input quality
Modulation: Bit error rate of tuner input
FEC: FEC display
Guard Interval: Guard Interval display
FFT: FFT display
IP: IP input status
Total Bitrate: Total bitrate of IP input
Packet size: IP input Packet size
Link Status: Link Status display
3.1.2 Tuner
COFDM Setting
Frequency (MHz): Local channel frequency
Band Width: select from 6/7/8MHz
11
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
QPSK Setting
LNB Freq. (MHz): LNB Local Oscillator Frequency
SatFreq.(MHz): Satellite down link frequency
Symbol rate(KBaud): Set Symbol rate
LNB Voltage: Select from OFF/13V/18V
LNB 22KHz.: Select from OFF/22K
DisEqc: Select from DisEqc Off, Port A, Port B, Port C, Port D
3.1.3 CI
Source : Select from Tuner, ASI Input, IP or MUX TS.
Program column: Show the program name.
Select column: Select the channels which you want to descramble. Free means this channel can
be received without CAM; Bypass means to skip this channel, this program will be still scrambled;
Slot 1/Slot 2 means to descramble the program by CAM modules in different CI slots.
3.1.4 Decoder
3.1.4.1 Audio
12
www.antiktech.com
Brighten your digital view!
Audio Output
Audio level: Audio level, ranging from 0-99.
Audio Mode: Select from Stereo, Left, Right and Mono
Audio language: Audio language
SDI Output
Embedded Audio:On/Off.
3.1.4.2 Video
Video Output
Video Standard: Select from Auto/1920x1080i 30/1920x1080i 29.97/1920x1080i
25/1280x720p 60/1280x720p 59.97/1280x720p 50/720x480p
59.94/720x480p 60/720x480p 60/720x576p 50/720x576p 25/
Screen: Select from Auto, 4: 3 Full, 4: 3 Letterbox, 16: 9 Letterbox or 16: 9 Full.
DVB subtitle language: Choose DVB Subtitle language.
EBU subtitle language: Choose EBU Subtitle language.
Subtitle Priority: Select from DVB First or EBU First.
Fail Mode: Select from Black Screen, No Sync and Still Picture. VBI Mode: Off/On.
VBI option only controls Closed Caption over CVBS. To activate the CC
over CVBS, enable the VBI option.
Close Caption: Off/On. This switch controls both CC on CVBS and SDI.
CVBS Sub PAL: select PAL mode, including PAL-B/D/G/H/I, PAL-N, PAL-N_C and
SECAM.
CVBS Sub NTSC: select NTSC Mode, including NTSC-M, NTSC-M_J, NTSC-M_443
13
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
and PAL-M.
Note: the sub-menus VBI Mode, CVBS Sub PAL and CVBS Sub NTSC will only
show up when the Closed Caption option is on.
3.1.4.3 Decoder Play
Program Selection
Source: Select from Tuner, ASI Input, IP, MUX TS, CI Descramble or BISS De-encrypted..
Program: Choose the program need to be played
Mode
Decoder Mode: Select from Manual Selection and First Service.
First Service means to select the program number automatically, normally the first program in
the TS.
Manual Selection means to select the program manually.
3.1.5 Output
ASI1 Output
Source: Select from Tuner, ASI Input, IP, MUX TS, CI Descramble or BISS De-encrypted..
ASI2 Output
Source: Select from Tuner, ASI Input, IP, MUX TS, CI Descramble or BISS De-encrypted..
14
www.antiktech.com
Brighten your digital view!
3.1.6 BISS
BISS Mode: Select from OFF, Biss E or Biss 1.
Biss 1: Password is required for Biss 1 setup.
Biss E: ID and Key are required for Biss E setup.
3.1.7 MUX
Output Bit rate: Set output bit rate.
TS input: Program list from ASI input. User can click “Refresh“button to refresh the list
TS output: Select output program.
15
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
3.1.8 IP Out
Source: TS/IP output signal source, select from: Tuner, ASI, CI Descramble.
TS Pkts Per UDP: Set how many TS packages will be encapsulated in one UDP package.
The valid range goes from 1 to 7.
Protocol: Select from UDP or RTP.
Time to Live: Set the number of the routers over which the TS over IP can be transmitted.
The valid range goes from 1 to 255.
16
www.antiktech.com
Brighten your digital view!
Service type: Select from Normal, Min Monetary Cost, Max Reliability, Max Throughput and
Min Delay.
Stream IP Address: IP address of TS/IP output signal source.
Stream Netmask: Subnet mask of TS/IP output signal source.
Stream Gateway: Gateway of TS/IP output signal source.
Stream MAC address: TS/IP output signal source Mac address.
Gateway Mac Address: Gateway MAC address.
Mode: Select from DVB and IPTV output
DVB Mode
TS which comes from the ‘source’ selected in previous step will be packed into IP Stream
directly. It requires configuring the following parameters.
Multicast/unicast IP: Multicast or unicast IP address setting.
Target UDP port: Multicast UDP port number.
Target Mac address: Set the Mac address of PC at the receiving end in Unicast mode.
IPTV Mode
TS which comes from the ‘source’ selected in previous step will be de-Muxed to several single
programs, and each program is packed into one IP stream.
Channel Number: Select IPTV output channel number ranging from 1~6 (or 1~32).
Channel 0~5 (0~32): Select IP output channel to be configured.
Enable: Check this option to enable one channel.
Multicast/unicast IP: Set Multicast or Unicast IP address.
Target UDP port: Set Multicast UDP port
Target Mac Address: In Unicast Mode, Mac address of the TS reception device
TS input: Show program list of signal source.
17
www.antiktech.com
MR9200/MR9400
IP output: Select the output program of each channel.
3.1.9 IP In
Multicast IP: Multicast IP address.
Multicast UDP port: Set Multicast UDP port number.
Stream IP address: IP address of TS/IP signal source.
18
www.antiktech.com
Digital Modular Headend Bank
Brighten your digital view!
Protocol: Network Protocol including UDP or RTP.
Stream Netmask: Subnet mask of TS/IP signal source.
Smoothing: Set Smoothing mode, including Auto, Fixed rate, Disable.
Stream Gateway: Gateway of TS/IP signal source.
Stream MAC address: Mac address of TS/IP signal source.
3.1.10 Backup
Main channel:select main channel from ASI or Tuner.
Backup channel: select backup channel from ASI or Tuner.
Main CH Unlock Time: set Main CH Unlock Time, ranging from 0 to 59 seconds. When
signal of the main channel remains the disconnected status over
this value, the unit will switch to the backup channel automatically.
Main CH Recover Time: set Main CH Recover Time, ranging from 0 to 59 seconds. When
the signal of the main channel recovers and remains stable over
this value, the unit will switch back to the main channel.
3.1.11 System
3.1.11.1 Device
Device Information
Unit Name: User can edit the unit name.
Serial Number: The serial number of the unit.
Optional Function
External Board Type: Select from No Exist/IP out/IP in/QAM out.
19
www.antiktech.com
MR9200/MR9400
Mux Function: Enable/Disale
Filter Function: Select from Disable/Filter/Mux.
3.1.11.2 Version
3.1.11.3 Network
Network
Target device
Device IP: IP address of current device.
Net mask: Network mask
Gateway: Gateway address
MAC Address
Alarm Setting
Trap IP Addr : IP address of SNMP target device.
NTP
NTP Server IP: Edit NTP Server IP.
NTP Interval(s): Edit NTP refreshing interval.
20
www.antiktech.com
Digital Modular Headend Bank
Brighten your digital view!
Time Zone: Select time zone.
Time
Date: Display current date.
Time: Display current time.
3.2 MR9200P/MR9400P Decoder Module
3.2.1 Status Menu
Output Status
Video: Video status
Audio: Audio status
Input Status
ASI: ASI input status
Packet size: ASI input Packet size
Total Bitrate: Total bitrate of ASI input
Valid Bitrate: Valid bitrate of ASI input
Tuner: Tuner input status
Total Bitrate: Total bitrate of Tuner input
Packet size: Tuner input Packet size
Valid Bitrate: valid bitrate of tuner input
21
www.antiktech.com
MR9200/MR9400
Strength: Tuner input intensity
BER: Bit error rate of tuner input
Digital Modular Headend Bank
C/N: Carrier noise of tuner input
Eb/No: Tuner input quality
3.2.2 Input Menu
LNB Freq.(MHz): LNB Local Oscillator Frequency
SatFreq.(MHz): Satellite down link frequency
Symbol rate(KBaud): Set Symbol rate
LNB Voltage: Select from OFF/13V/18V
LNB 22KHz.: Select from OFF/22K
DisEqc: Select from DisEqc Off, Port A, Port B, Port C, Port D
3.2.3 Output Menu
22
www.antiktech.com
Brighten your digital view!
3.2.3.1 ASI Output
Source: Select from Tuner/ASI/CI scramble
Packet Size(Byte): Bypass/188
3.2.3.2 ASI2/SDI
ASI2/SDI Output
Mode: Select from ASI2/SDI
SDI
Audio DID: Select from Group1~4
Emb Audios: Select from None/One/Two/One&Two
3.2.3.3 Decoder Play
Source: Select from Tuner, ASI, CI Descramble, IP
Program: Choose the program need to be played
23
www.antiktech.com
MR9200/MR9400
3.2.3.4 Decoder Config
24
www.antiktech.com
Digital Modular Headend Bank
Brighten your digital view!
Video Output
Video Standard: Select from Auto, PAL, NTSC and SECAM.
Screen: Select from Auto, 4: 3 Full, 4: 3 Letterbox or 16: 9 Full.
DVB subtitle language: Choose DVB Subtitle language.
EBU subtitle language: Choose EBU Subtitle language.
Subtitle Priority: Select from DVB First or EBU First.
Fail Mode: Select from Black Screen, No Sync and Still Picture.
VBI Mode: Off/On
Close Caption: Off/On
Biss
Mode: Select from OFF, Biss E or Biss 1.
Biss 1 Setup: Password is required for Biss 1 setup.
Biss E Setup: ID and Password are required for Biss E setup.
Audio Output
Audio level: Audio level, ranging from 0-99.
Audio Mode: Select from Stereo, Left, Right and Mono
Audio language: Audio language
3.2.4 CI
Source : Select from Tuner or ASI.
Program column: Show the program name.
Select column: Select the channels which you want to descramble. Free means this channel can
be received without CAM; Bypass means to skip this channel, this program will be
still scrambled; Slot 1/Slot 2 means to descramble the program by CAM modules
in different CI slots.
25
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
3.2.5 IP Out
Source: TS/IP output signal source, select from: Tuner, ASI, CI Descramble.
TS Pkts Per UDP: Set how many TS packages will be encapsulated in one UDP
package. The valid range goes from 1 to 7.
Protocol: Select from UDP or RTP.
Time to Live: Set the number of the routers over which the TS over IP can be transmitted. The
valid range goes from 1 to 255.
Service type: Select from Normal, Min Monetary Cost, Max Reliability, Max Throughput and Min
Delay.
Stream IP Address: IP address of TS/IP output signal source.
Stream Netmask: Subnet mask of TS/IP output signal source.
Stream Gateway: Gateway of TS/IP output signal source.
Stream MAC address: TS/IP output signal source Mac address.
Gateway Mac Address: Gateway MAC address.
Mode : Select from DVB and IPTV output
DVB Mode
TS which comes from the ‘source’ selected in previous step will be packed into IP Stream directly.
It requires configuring the following parameters.
26
www.antiktech.com
Brighten your digital view!
Multicast/unicast IP: Multicast or unicast IP address setting.
Target UDP port: Multicast UDP port number.
Target Mac address: Set the Mac address of PC at the receiving end in Unicast mode.
IPTV Mode
TS which comes from the ‘source’ selected in previous step will be de-Muxed to several single
programs, and each program is packed into one IP stream.
Channel Number: Select IPTV output channel number ranging from 1~6(or 1~32).
Channel 0~5(0~32): Select IP output channel to be configured.
Enable: Check this option to enable one channel.
Multicast/unicast IP: Set Multicast or Unicast IP address.
27
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
Target UDP port: Set Multicast UDP port
Target Mac Address: In Unicast Mode, Mac address of the TS reception device
TS input: Show program list of signal source.
IP output: Select the output program of each channel.
3.2.6 IP In
Multicast IP: Multicast IP address.
Multicast UDP port: Set Multicast UDP port number.
Stream IP: IP address of TS/IP signal source.
Protocol: Network Protocol including UDP or RTP.
Stream Netmask: Subnet mask of TS/IP signal source.
Smoothing: Set Smoothing mode, including Auto, Fixed rate, Disable.
Stream Gateway: Gateway of TS/IP signal source.
TS Bit Rate: Input Bit rate.
Stream MAC address: Mac address of TS/IP signal source.
3.2.7 System
Device Info
Unit Name: User can edit the unit name.
Serial Number: The serial number of the unit.
28
www.antiktech.com
Brighten your digital view!
Version
Main Version
WEB Version
Linux OS Version
ARM S/W Version
Decoder Version
FPGA Version
TS/IP Out NIOS
TS/IP Out FPGA
Network
Target device
IP Address: IP address of current device.
Subnet mask: Network mask
29
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
Gateway: Gateway address
Alarm Setting
Trap IP Addr : IP address of SNMP target device.
Optional Function
External Board Type: Select from No Exist/IP out/IP in/QAM out.
Filter Function: Select from Disable/Filter/Mux.
Machine Type
Input Type: Select from None/DVB-S/DVB-S2/DVB-T/DVB-C/DS3/auto.
Stream MAC Address: MAC address of the IP board.
Watch Dog Switch: Enable/Disable.
3.3 MR9400EC Encoder Module
3.3.1 Status
Input Status
IP: IP input status
Video Input Format: Display format
Total Bitrate: Total bitrate of ASI input
Valid Bitrate: Valid bitrate of ASI input
Output Status
Encoder: Encoder output status
Total Bitrate: Total bitrate of encoder output
Valid Bitrate: valid bitrate of encoder output
30
www.antiktech.com
Brighten your digital view!
3.3.2 Encoder
Select Encoder in Work Mode.
Video Info
Video Input Source: Select from Composite Video, SDI Video, HDMI Video, YPbPr Video.
Video Rate Ctl : Select from CBR, VBR.
Video Bit Rate (Kb/s): Ranging from 0~19999 Kb/s.
Video Mode: 1920x1080i_29.97/1920x1080i_25/1440x1080i_29.97/1440x1080i_25/12
80x720p_59.94/1280x720p_50/720
x480i_29.97/720x576i_25 Video Aspect Ratio: Select from 4:3, 16:9
Audio Info
Audio1 Input Source: Select from SDI Audio, Composite1 Audio, Composite2 Audio,
HDMI Audio, AES1 Audio, AES2 Audio.
Audio1 Format: Select from MPEG1 Layer2.
Audio1 Channel: Select from Stereo, Single Channel.
Audio1 Bitrate(Kb/s): Select from 56kbps, 64kbps, 80kbps, 96kbps,
31
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
112kbps, 128kbps, 160kbps, 192kbps, 224kbps, 256kbps,
320kbps, 384kbps.
Audio1 SDI AES: Select from EMB1, EMB2, EMB3, EMB4.
Audio1 Level: Select from Ranging from 0~63.
Note: the bitrate 56kbps, 64kbps, 80kbps, 96kbps are only available at Single Channel
mode. 224kbps, 256kbps, 320kbps, 384kbps are only available at Stereo Mode.
Audio2 Input Source: Select from SDI Audio, Composite1 Audio, Composite2 Audio,
HDMI Audio,
AES1 Audio, AES2 Audio. Audio2 Channel: Select from Stereo, Single Channel.
Audio2 Bitrate(Kb/s): Select from 32kbps, 64kbps, 128kbps, 192kbps, 256kbps, 384kbps.
Audio2 SDI AES: Select from EMB1, EMB2, EMB3, EMB4.
Audio2 Level: Select from Ranging from 0~63.
Note: the bitrate 32kbps is only available at Single Channel mode. 256kbps, 384kbps
are only available at Stereo Mode.
Output
Output Program Number: Setting range 1-65535.
Output PMT PID: Setting range 101-8190.
Output PCR PID: Setting range 101-8190.
Output Video PID: Setting range 101-8190.
Output Audio1 PID: Setting range 101-8190.
Encode Audio2 PID: Setting range 101-8190.
PTS Time Set: Edit PTS Time.
3.3.3 Transcoder
Select Transcoder in Work Mode.
Transcode Out Bitrate
Encode Out Bitrate(Kb/s): Ranging 0~99999Kb/s.
Audio Info
Audio1 Format: Select from MPEG1 Layer2, AC3, MPEG2 AAC.
Audio2 Format: Select from MPEG1 Layer2, AC3, MPEG2 AAC.
Audio2 Input Source: Select from SDI Audio, Composite1 Audio, Composite2 Audio,
HDMI Audio, AES1 Audio, AES2 Audio.
Audio2 Channel: Select from Stereo, Single Channel.
Audio2 Bitrate(Kb/s): Select from 32kbps, 64kbps, 128kbps, 192kbps, 256kbps, 384kbps.
Audio2 SDI AES: Select from EMB1, EMB2, EMB3, EMB4.
32
www.antiktech.com
Brighten your digital view!
Audio2 Level: Ranging from 0~63.
Note: the bitrate 32kbps is only available at Single Channel mode. 256kbps, 384kbps
are only available at Stereo Mode.
Video Info
Video Rate Ctl: Select from CBR, VBR.
Video Bit Rate(Kb/s): Ranging from 0 to 19999 Kb/s.
Video Mode: Select from 720*480 60i, 720*576 50i, 1280*720 50p, 1280*720 60p,
1920*1080 50i, 1920*1080 60i, 1440*1080 50i and 1440*1080 60i.
Video Aspect Ratio: Select from 4:3, 16:9
Transcoder Program
Video Mode: Select from 720*480 60i, 720*576 50i, 1280*720 50p, 1280*720 60p,
1920*1080 50i, 1920*1080 60i, 1440*1080 50i and 1440*1080
60i.
33
www.antiktech.com
MR9200/MR9400
Input Program: Select from Program selection.
Transcoder Audio1 PID: Select from Audio PID selection.
Transcoder Audio2 PID: Select from Audio PID selection.
Output
Output Program Number: Setting range 1-65535.
Output PMT PID: Setting range 101-8190.
Output PCR PID: Setting range 101-8190.
Output Video PID: Setting range 101-8190.
Output Audio1 PID: Setting range 101-8190.
Encode Audio2 PID: Setting range 101-8190.
PTS Time Set: Edit PTS Time.
3.3.4 IP In
Multicast IP: Multicast IP address.
Multicast UDP port: Set Multicast UDP port number.
Stream IP: IP address of TS/IP signal source.
Protocol:Network Protocol including UDP or RTP.
Stream Netmask: Subnet mask of TS/IP signal source.
Smoothing: Select from Auto, Fixed rate, Disable.
Stream Gateway: Gateway of TS/IP signal source.
TS Bit Rate: Edit Input Bit rate.
Stream MAC address: Mac address of TS/IP signal source.
34
www.antiktech.com
Digital Modular Headend Bank
Brighten your digital view!
3.3.5 IP Out
TS Pkts Per UDP: Ranging from 1 to 7.
Protocol: UDP or RTP.
Time to Live: Ranging from 1 to 255.
Service type: Normal, Min Monetary Cost, Max Reliability, Max Throughput and Min Delay.
Extend Board IP: IP address of TS/IP output signal source.
Extend Board Subnet mask: Subnet mask of TS/IP output signal source.
Extend Board Gateway: Gateway of TS/IP output signal source.
Extend Board MAC address: TS/IP output signal source Mac address.
Gateway Mac Address: Gateway MAC address. If the target device is in the same network segment,
set the Gateway Mac Address to FF: FF: FF: FF: FF: FF.
Multicast Setup
Filter Switch
Off, All pass. Off means to block all the programs in the
TS, when selected the IP output list will be empty. All
Pass means to pass all the programs.
Multicast/unicast IP Set Multicast or Unicast IP address.
Multicast UDP port Set Multicast UDP port
Target Mac Address Mac address of the TS reception device.
TS input Show program list of signal source.
IP output Select the output program of each channel.
35
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
In Multicast Setting, the unit can save up to 6 Multicast profiles, which are shown on the right side
of menu. Select
3.3.6 Output
Out Channel Setting: Select from Encoder Out, Mux Out and ASI Out.
3.3.7 Mux
Output Bit rate: Set output bit rate.
TS ID: Set TS ID.
Service Name: Set Service name.
TS input: Program list from ASI input. User can click “Refresh“button to refresh the list
TS output: Select output program.
36
www.antiktech.com
Brighten your digital view!
3.3.8 System
Device Info
Unit Name: User can edit the unit name.
Serial Number: The serial number of the unit.
Version
Main Version
Encoder Version
FPGA Version
WEB Version
Network
Target device
IP Address: IP address of current device.
Subnet mask: Network mask
Gateway: Gateway address
MAC Address: Display MAC address
37
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
Alarm Setting
Trap IP Addr : IP address of SNMP target device.
External Board
Type: Select from No Exist/IP out/IP in/QAM out.
4. TECHNICAL SPECIFICATION
4.1 MR9200P Series
Tuner Input
DVB-S/S2 Tuner Input
Connector Type
75Ω 1 x F type female 75Ω for Input, 1 x F type female
for loop through output
Input Frequency Range
950 ~ 2150MHz
Input Level
-25 ~ -65dBm
Symbol Rates
DVB-S QPSK: 5~45MS/s; DVB-S2 8PSK 10 ~ 31MS/s
Roll-off Factor
DVB-S QPSK: 0.35; DVB-S2 8PSK: 0.35, 0.25, 0.2
FEC Code Rate
DVB-S2 8PSK: 2/3, 3/4, 3/5, 5/6, 8/9, 9/10
38
www.antiktech.com
Brighten your digital view!
DVB-S QPSK: 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
LNB Polarization
0, 13V, 18V selectable
LNB Band Switching Tone
0/22KHz selectable
DVB-S Tuner Input
Connector Type
1 x F type female 75Ω for Input, 1 x F type female 75Ω for loop through output
Input Frequency Range
950~2150MHz
Input Level
-25~-65dBm
Symbol Rates
2~45MS/s
Roll-off Factor
0.35
Puncture Rates
1/2, 2/3, 3/4, 5/6, 7/8
LNB Polarization
0, 13V, 18V selectable
LNB Band Switching Tone 0/22KHz selectable
DVB-C Tuner Input
Connector Type
1 x F type female 75Ω for Input, 1 x F type female 75Ω for loop through output
Input Frequency Range
48 ~ 860MHz
Symbol Rates
1 ~ 7MS/s (ITU J.83 Annex A)
Constellation 64/128/256 QAM
Input Level
-15 ~ 15dBmV
Bandwidth6/7/8MHz
Input Return Loss 7dB (typ.)
DVB-T Tuner Input
Connector Type
1 x F type female 75Ω for Input, 1 x F type female 75Ω for loop through output
Input Frequency Range
174 ~ 230MHz (VHF); 470 ~ 860MHz (UHF)
Input Level
-20 ~ -70dBm
Constellation
QPSK, 16-QAM, 64-QAM
Carrier bandwidth 6/7/8 MHz
FTT Mode
2K/8K
Guard Interval
1/4, 1/8, 1/16, 1/32
FEC Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
ASI Input
Connector
1 x BNC Female, 75Ω
Standard
DVB-ASI, EN50083-9
39
www.antiktech.com
MR9200/MR9400
Input Bit Rates
≤ 100Mb/s
Package Length
188 or 204 Bytes
Digital Modular Headend Bank
TS over IP (for MR9200P series)
Connector Type 1 × RJ45, 10/100M for TS/IP
Useful bit rate
70Mb/s for 10/100M
Protocol UDP / RTP, Multicast / Unicast, IGMPv2, ARP
TS Processing
TS Input Management Remux and demux between Tuner, ASI and TS/IP Inputs
TS Output Management Remux and demux for 2 mirror ASI outputs
Service and PID management Remux, filtering and remapping
PSI/SI PSI/SI table regeneration, NIT and SDT edition, LCN Edition and Re-generation
Descrambler DVB Common Scrambling Algorithm (CSA)
Common Interface Double PCMCIA slots, compatible with major CA
CAMs in the market
ASI Output
Connector Type
2 x BNC Female, 75Ω (one connector is shared with SDI output)
Standard
DVB-ASI, EN50083-9
Output Bit Rates
≤ 99Mb/s
Digital Video Processing
Video Standard
MPEG-2(MP@ ML)
SDI Video Resolution 576i x 25, 480i x 29.97
Video Bit Rate
< 80Mb/s
SD-SDI Output
Connector Type 1 x BNC Female, 75Ω (share with one of the two ASI outputs)
Serial Interface SMPTE 259M, 270 Mb/s (10bit)
Level
800mV p-p
Audio Embedded
Yes
Digital Audio Processing
Number of Outputs 40
www.antiktech.com
1 pair of stereo audio output (1 Audio PID is decoded)
Brighten your digital view!
Analog Video Output
CVBS Connector
1 x 2.5mm phone jack (with phone jack to RCA adaptor)
Video Standard NTSC, PAL, and SECAM
Analog Audio Output
Connector Type 1 x 2.5mm phone jack for CVBS and stereo audio
Number of Outputs
1 pair of stereo audio
Control & Monitoring
Connector Type 1× RJ45, 10/100M, for equipment IP Control
Remote Control SNMP, HTTP Web, Proprietary HDMS Network System
Management Software
Local Control
Handheld Programmer Unit
Software Upgrade
FTP loader
4.2 MR9400P Series
Tuner Input
DVB-S/S2 Tuner Input
Connector Type
1 x F type female 75Ω for Input, 1 x F type female 75Ω for loop through output
Input Frequency Range
950 ~ 2150MHz
Input Level
-25 ~ -65dBm
Symbol Rate
5 ~ 45MS/s for QPSK
10 ~ 31MS/s for 8PSK
Rolling-off Factor
DVB-S QPSK: 0.35
DVB-S2 8PSK: 0.35, 0.25, 0.2
Punctured Rates
DVB-S QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 8/10
DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
LNB Polarization
0, 13V, 18V selectable
LNB Band Switching Tone
0/22KHz selectable
DiSEqC
DiSEqC 1.0
DVB-C Tuner Input
Connector Type
1 x F type female 75Ω for Input, 1 x F type female 75Ω for loop through output
41
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
Input frequency
48~860MHz
Input level
45 ~ 75dBuV
Symbol rate
1 ~ 7MS/s (ITU J.83 Annex A)
Constellation64/128/256QAM
Bandwidth6/7/8MHz
Input return loss
7dB (typ.)
DVB-T/T2 Tuner Input
Connector Type
1 x F type female 75Ω for Input, 1 x F type female 75Ω for loop through output
Input frequency
104~862MHz (VHF/UHF)
Input level
-20 ~ -70dBm (Quasi Error Free, QEF)
Constellation
DVB-T: QPSK/16-QAM/64-QAM
DVB-T2: QPSK, 16QAM, 64QAM, 256QAM
Bandwidth6MHz/7MHz/8MHz
FFT mode
DVB-T: 2K/8K
DVB-T2: 1K, 2K, 4K, 8K, 16K, 32K
Guard interval
DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64, 1/128
FEC code rate
DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Input return loss
7dB (typ.)
ASI Input
Connector Type
2 × BNC Female, 75Ω
Standard
DVB-ASI, EN50083-9
Input Bit Rates
≤ 100Mb/s
Package Length
188 or 204 Bytes
TS Processing
Re-multiplexing of 2 ASI Inputs
TS over IP
Connector Type
1 × RJ45, 10/100M for TS/IP
Useful bit rate
70Mb/s for 10/100M
Protocol
UDP / RTP, Multicast / Unicast, IGMPv2, ARP
TS Processing
TS Input Management
Remux and demux between Tuner, ASI and TS/IP Inputs
TS Output Management
42
www.antiktech.com
Remux and demux for 2 independent ASI outputs
Brighten your digital view!
Service and PID management
Remux, filtering and remapping
PSI/SI
PSI/SI table regeneration, NIT and SDT edition, LCN Edition and Re-generation
Descrambler
DVB Common Scrambling Algorithm (CSA)
BISS Mode
BISS-1, BISS-E
Common Interface
Double PCMCIA slots, compatible with major CA CAMs in the market
ASI Output
Connector Type
2 x BNC Female, 75Ω
Standard
DVB-ASI, EN50083-9
TS Processing
2 Independent TS Re-multiplexing from tuner, TS/IP and 2 ASI inputs
HDMI Output
Standard HDMI
1x HDMI 1.3 interface (partial)
Video Resolution
1080i x 30, 1080i x 29.97, 1080i x 25, 720p x 60, 720p x 59.94, 720p x 50, 480p x 60, 576p x 50, 576i x 25, 480i x 29.97
Audio Embedded
Digital Audio Loop Through
Digital Video Processing
Video Standard
MPEG-2(MP@ ML for SD, MP@HL for HD)
MPEG 4/H.264 AVC Part 10 (MP@L3 for SD, HP@
L4.1 for HD)
SDI Video Resolution
1080i x 30, 1080i x 29.97, 1080i x 25, 720p x 60
720p x 59.94, 720p x 50, 576i x 25, 480i x 29.97
Video Bit Rate
< 80Mb/s
SD-SDI Output
Connector Type
2 x SD-SDI outputs in mirror, BNC Female, 75Ω
Serial Interface
SMPTE 259M, 270 Mb/s (10bit)
Level
800mV p-p
HD-SDI Output
Connector Type
2 HD-SDI outputs in mirror, BNC Female, 75Ω
Serial Interface
SMPTE 292M, 1.485 Gbit/s (10bit)
Level
800mV p-p
43
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
Digital Audio Processing
Number of Outputs
2 pairs of audio outputs (2 Audio PIDs are decoded)
Analog Video Output
YPbPr Connector
1 x 2.5mm phone jack, 75Ω (with phone jack to RCA adaptor)
CVBS Connector
1 x 2.5mm phone jack, 75Ω (with phone jack to RCA adaptor)
Video Standard
NTSC, PAL, and SECAM
YPbPr Resolution
1080i x 30, 1080i x 29.97, 1080i x 25, 720p x 60, 720p x 59.94, 720p x 50, 480p x 60, 576p x 50, 576i x 25, 480i x 29.97
Signal Level
I.0 Vp-p±5%
Frequency Response
< ±I dB at 5.5 MHz
Chroma-Luma Delay
< ±30 ns
Field Time Distortion
< 2%
Line Time Distortion
< 1%
Short Time distortion
< 2%
Differential Gain
< 4%
Differential Phase
< 2°
Signal to Noise Ratio
> 55 dB (luminance weighted)
Analog Audio Output
Connector type
1 x 2.5mm phone jack, 75Ω (with phone jack to RCA adaptor)
Output mode
Left, Right, Dual Mono, Stereo
Number of Outputs
2 pairs of audio outputs (2 Audio PIDs are decoded)
Baseband Data Output
SubtitleDVB/EBU
VBI
Teletext, WSS, VFD, VPS
Closed Caption
EIA 608, EIA 708, EIA 608-to-708
Redundancy
Redundancy Port
between Tuner, 2 x ASI inputs and TS/IP
Switching Condition
TS Sync Loss
Switching Mode
Main, Spare
44
www.antiktech.com
Brighten your digital view!
Control & Monitoring
Connector Type
1×RJ45, 10/100M, for equipment IP Control
Remote Control
SNMP, HTTP Web, Proprietary HDMS Network
System Management Software
Local Control
Handheld Programmer Unit
Equipment Upgrade
FTP loader
4.3 MR9400EC Series
Video Compression
Video Resolution
1080i (1920/1440 x 1080) @25Hz, 29.97Hz, 30Hz: SMPTE274M (for 1500EC only)
720p (1280x720) @50Hz, 59.94Hz, 60Hz: SMPTE296M (for 1500EC only)
480i (720x480) @29.97Hz: SMPTE125M
576i (720x576) @25Hz: ITU-R BT.656-4
Compression Standard
H.264, High Profile Level 4.0
Video Encoding bit rate
2Mb/s-20Mb/s
Audio Compression
Audio Input
Embedded Audio, Analog audio
Audio Channels
1 pair of stereo
Sampling rate
48KHz
Audio compression bit rate
16~256Kb/s
Audio/Video Input Interface
Analog Audio
1 x 2.5mm phone jack, Stereo L/ R (with phone jack to RCA adaptor)
Analog CVBS
1 x 2.5mm phone jack (with phone jack to RCA adaptor)
HD-SDI
1 x BNC Female, 75Ω (for 1500EC)
SD-SDI
1 x BNC Female, 75Ω (for 1400EC)
YPbPr
2.5mm phone jack port
HDMI
1 x HDMI 1.3 interface
ASI Input
Connector Type
1 x BNC Female, 75Ω
Input bit rate
≤ 100Mb/s
Packet Mode
Byte
45
www.antiktech.com
MR9200/MR9400
Packet Length
Digital Modular Headend Bank
188/204 Bytes
TS Processing
TS Input Management
Remux and demux between ASI input and the SPTS encoded
TS Output Management
Remux and demux for mirror ASI outputs
Service and PID management
Remux, filtering and remapping
PSI/SI
PSI/SI table regeneration, NIT and SDT edition
TS over IP
Connector Type
1 × RJ45, 10/100M for TS/IP
Useful bit rate
70Mb/s for 10/100M
Protocol
UDP / RTP, Multicast / Unicast, IGMPv2, ARP
Source
Built-in Re-mux, ASI input, Encoder
ASI Output Interface
Connector Type
2 x BNC Female, 75Ω
Output bit rate
≤ 99Mb/s
Packet Length
188 / 204 Bytes
Signal Level
800mVpp±10%
Control & Monitoring
Connector Type
1×RJ45, 10/100M, for equipment IP Control
Remote Control
SNMP, HTTP Web, Proprietary HDMS network
Management Software
Local Control
Handheld Programmer Unit
Software Upgrade
FTP loader
46
www.antiktech.com
Brighten your digital view!
5. DEFAULT DEVICE PARAMETERS ON DELIVERY
5.1 MR9400P
Main-Menu
Sub-Menu
Status
Default
LNB Freq: 5150MHz
Satellite Freq: 4000MHz
Symbol Rate: 26850KBaud
LNB Voltage: Off
DVB-S2
LNB 22KHz: Off
DiSEQC: DiSEQC OFF
PLS Gold Code: 0
Frequency Offset High: 5000KHz Frequency Offset Low: -5000KHz
Constellation: 64
QAM
Inputs
Frequency: 5000MHz
Symbol Rate: 6875KBaud
COFDM
Frequency: 794Mhz
Bandwidth: 6Mhz
RSSI
Stream IP Addr: 10.10.10.10
Stream Network: 255.255.255.0
Stream Gateway: 10.10.10.1
Ethernet
Protocol: UDP
Output Smoothing: Auto
Multicast IP: 238.1.1.1
Multicast UDP port:3000
TS Bit Rate: 38000Kbps
BISS Menu
CI
Biss Mode: OFF
Biss Source: ASI Input
CI Source: Tuner
Source: ASI Input
Outputs
Program: Sid=0
Decoder
Video Standard: Auto Screen: Auto
-DVB subtitle language: eng
-EBU subtitle language: eng
47
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
-Subtitle Priority: DVB First
-Fail Mode: Black Screen
-VBI Mode: Disable
-Close Caption: Off
-CVBS Sub PAL: PAL-B/D/G/H/I
-CVBS Sub NTSC: NTSC-M
Audio Level: 99
Audio Mode: Stereo
Audio Priority:eng 0/ unknown
Mode: Manual Selection
ASI1/2
SDI
ASI Input
Embeded Audios: On
Closed Caption Mode: Auto
Mux Switch: Off
Mux
Bit Rate: 50000Kb/s
TS ID: 1
Stream IP Addr: 10.10.10.10
Stream Network: 255.255.255.0
Stream Gateway: 10.10.10.1
Gateway Mac address: ff:ff:ff:ff:ff:ff
Protocol: UDP TS Pkts Per UDP: 7 Time to live: 255
Type Of Service: Normal Source: ASI Input Mode:
Ethernet
DVB Max Channels: 6
Multicast IP Address (DVB mode): 225.1.1.1
Multicast IP Address (IPTV mode): 238.1.1.1
Multicast UDP Port (DVB mode): 3000
Multicast UDP Port (IPTV mode): 1234
Target MAC Address: 00:00:12:34:22:56
Switch: On
HTTP Login
48
www.antiktech.com
username: root
password: 12345
Brighten your digital view!
5.2 MR9200P
Main-Menu
Sub-Menu
Status
Default
LNB Freq: 5150MHz
Satellite Freq: 4000MHz
QPSK
Symbol Rate: 26850KBaud
LNB Voltage: Off
LNB 22KHz: Off
DiSEQC: DiSEQC OFF
COFDM
Frequency:794Mhz
Bandwidth: 6Mhz
Constellation: 64
Inputs
QAM
Frequency: 5000MHz
Symbol Rate: 6875KBaud
RSSI
Stream IP Addr: 10.10.10.10
Stream Network: 255.255.255.0
Stream Gateway: 10.10.10.1
Ethernet
Protocol: UDP
Output Smoothing: Auto
Multicast IP: 238.1.1.1
Multicast UDP port:3000
TS Bit Rate: 38000Kbps
Status
CI
CI Source: ASI Input
Video Standard: Auto
Screen: 4:3 Full
Subtitle Priority: DVB first
Outputs
Decoder
Fail Mode: Black Screen
VBI Mode: Enable
Audio Level: 49.
Audio Mode: Stereo
Biss Mode: OFF
ASI
ASI2/SDI
ASI Source: TUNER
ASI Package Length: Bypass
SDI
49
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
Mux Switch: Off
Mux
Bit Rate:50000Kb/s
TS ID: 1
Filter
Bit Rate:50000Kb/s
Stream IP Addr: 10.10.10.10
Stream Network: 255.255.255.0
Stream Gateway: 10.10.10.1
Gateway Mac address: ff:ff:ff:ff:ff:ff
Protocol: UDP
TS Pkts Per UDP: 7
Time to live: 255
Type Of Service: Normal
Ethernet
Source: Tuner
Mode: IPTV
Max Channels: 6
Multicast IP Address(DVB mode): 225.1.1.1
Multicast IP Address(IPTV mode): 238.1.1.1
Multicast UDP Port(DVB mode):3000
Multicast UDP Port(IPTV mode):1234
Target MAC Address: 00:00:12:34:22:56
Switch: On
IP Address: 10.10.70.48
System
Local Setup
Net Mask: 255.255.255.0
Gateway: 10.10.70.1
Trap IP Addr
10.10.70.66
Unit Name
MR9200P
Properties
Factory Settings
Optional Functions
Machine Type
HTTP Login
50
www.antiktech.com
username: root
password: 12345
Brighten your digital view!
5.3 MR9400EC
Main-Menu
Sub-Menu
Input ASI Bit Rate
Input Setup
Encoder Bit Rate
Default
Video Input Format
Work Mode
Encode
Encode Start Out
Video Rate Ctl: Cbr
Mode: 720x576i_25
Video Setup
Video Bit Rate: 6000Kb/s
Aspect Ratio: 4:3
Video Input Source: SDI Video
Audio1 Format: MPEG1 Layer2
Audio1 Bit Rate: 128
Audio1 Channel: Stereo
Audio1 Level: 63
Audio1 Input Source: SDI Audio
Encoder
Setup
Audio Setup
Audio1 SDI EMB:EMB1
Audio2 Bit Rate: 192
Audio2 Channel: Stereo
Audio2 Level: 63
Audio2 Input Source: SDI Audio
Audio2 SDI EMB:EMB2
Encoder Bit Rate
8000Kb/s
05378
05376
05377
Advanced Setup
00768
08078
500
H264 Encoded
Work Mode
Encode
Transcode Start Out
Transcoder
Setup
Video Rate Ctl: Cbr
Video Setup
Format: 720x576i x 25
Video Bit Rate: 6000Kb/s
Aspect Ratio: 4:3
51
www.antiktech.com
MR9200/MR9400
Digital Modular Headend Bank
Audio1 Format: MPEG1 Layer2
Audio2 Format: MPEG1 Layer2
EC Audio2 Bit Rate: 192K
Audio Setup
EC Audio2 Channel: Stereo
EC Audio2 Level: 63
EC Audio2 Source: SDI
EC SDI Audio2:EMB2
Transcode Bit Rate
8000kb/s
Output Program Number : 00768
Output PMT PID : 05378
Transcoder
Setup
Output PCR PID : 08078
Output Video PID : 05376
Advanced Setup
Output Audio1 PID : 05377
Output Audio2 PID : 05379
Output Audio3 PID : 08191
Output Service Name: H264 Encoded: PTS Time Set: 500
Input Video Format
720x576i x 25
Input Program List
Output
Setup
Transcoder Audio PID1
01281
Transcoder Audio PID2
00258
Out Channel
Encoder Out
Output Bit Rate
14000Kb/s
IP Board IP Address
10.10.70.56
IP Board Net Mask
255.255.255.0
IP Board Gateway
10.10.70.1
IP Board MAC Address
Protocol UDP
IP Board
Setup
(IP Out)
TS Pkts Per UDP
7
Time To Live
002
Type Of Service
Min Delay
Gate MAC Address
Multicast 1
Multicast IP Address: 238.69.70.1
Multicast 2
Multicast UDP Port: 01234
Multicast 3
Program List: H.264 Encoded
Multicast 4
Mode: All pass
52
www.antiktech.com
Brighten your digital view!
IP Board
Setup
(IP Out)
IP Board
Setup
(IP In)
Multicast 5
Program List: H.264 Encoded
Multicast 6
IP Board IP Address
10.10.70.56
IP Board Net Mask
255.255.255.0
IP Board Gateway
10.10.70.1
IP Board MAC Address
Multicast Address
238.69.70.1
Multicast UDP Port
01234
Protocol UDP
PID
Processing
Output Smoothing
Auto
TS Bit Rate
30000Kb/s
Program List
Encoder
Set TransportStream ID
00008
MUX Output Bit Rate
10000Kb/s
MUX
IP Address: 10.10.70.48
Local Setup
Net Mask: 255.255.255.0
Gateway: 10.10.70.1
System
Remote Setting
10.10.70.25
Unit Name
MR9400EC
Software Version
Extend Board Select
No Out Board
Factory Settings
SN
Composite Audio Boost
Disable
Login ID
root
Login Password
12345
53
www.antiktech.com
License Declaration
Without the prior written permission of ANTIK Technology, no part of
this manual shall be added or removed in any form, adaptation, excerpt,
translate, reproduce or imitation.
The entire contents of this manual may be changed by ANTIK
Technology at any time without prior notice.
Specific features are subject to the actual software features.
©2015 Copyright by ANTIK Technology. ALL RIGHTS RESERVED
is a registered trademark of ANTIK Technology.
This manual covers all other product trademarks with the appropriate companies.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising