33-1409 - 33-1418 SFP+ Direct Attach Active Copper Cables ,5m 7m

33-1409 - 33-1418  SFP+ Direct Attach Active Copper Cables ,5m 7m
33-1409 - 33-1418
SFP+ Direct Attach Active Copper Cables ,5m、7m、10m、12m Reach
Features
Support for multi-gigabit data rates up to
10.5Gbps
Data rates backward compatible to 1Gbps
Hot-pluggable SFP 20PIN footprint
I/O Connector designed for high speed
differential signal applications
Improved Pluggable Form Factor(IPF) compliant
for enhanced EMI/EMC performance
Low Power Consumption < 0.5W
Power Supply :+3.3V
Compatible to SFP+ MSA
Temperature Range: 0~ 70 °C
RoHS Compatible
Applications
High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
Switched fabric I/O such as ultra high bandwidth switches and routers
Data center cabling infrastructure
High density connections between networking equipment
Product Description
The SFP+ active cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet
and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve
high port density, configurability and utilization at a very low cast and reduced power budget. The high
speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard
requirements for performance and reliability.
Page 1 of 4
Feb 28 /2013
Recommended Operating Conditions
Parameter
Symbol
Min
Max
Unit
-40
+85
°C
Tc
0
+70
°C
Power Supply Voltage
VCC3
3.14
3.47
V
Power Dissipation
PD
0.5
W
Storage Ambient Temperature
Operating Case Temperature
Systems
Performance
Typical
3.3
Media
Operating parameters
Hot-pluggable, industry-standard Small
10.5Gbps line speed, full duplex
Form-Factor
Supply voltage: 3.3V
Bit error rate: better than 10E-12
Pluggable(SFP+) copper cable,
Power consumption(per end): max 0.5W
available max 10m
Pin Descriptions
Pin
Logic
1
Symbol
Name/Description
VeeT
Transmitter Ground
2
LV-TTL-O
TX_Fault
N/A
3
LV-TTL-I
TX_DIS
Transmitter Disable
4
LV-TTL-I/O
SDA
Tow Wire Serial Data
5
LV-TTL-I
SCL
Tow Wire Serial Clock
MOD_DEF0
Module present, connect to VeeT
6
7
LV-TTL-I
RS0
N/A
8
LV-TTL-O
LOS
LOS of Signal
9
LV-TTL-I
RS1
N/A
10
VeeR
Reciever Ground
11
VeeR
Reciever Ground
12
CML-O
RD-
Reciever Data Inverted
13
CML-O
RD+
Reciever Data Non-Inverted
14
VeeR
Reciever Ground
15
VccR
Reciever Supply 3.3V
16
VccT
Transmitter Supply 3.3V
17
VeeT
Transmitter Ground
18
CML-I
TD+
Transmitter Data Non-Inverted
19
CML_I
TD-
Transmitter Data Inverted
VeeT
Transmitter Ground
20
Page 2 of 4
Notes
1
1
1
Feb 28 /2013
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
Mechanical Dimensions
Page 3 of 4
Feb 28 /2013
E-mail: ritazeng@gigalight.com.cn
Web : http://www.gigalight.com.cn
Page 4 of 4
Feb 28 /2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising