null  User manual
Connections
Playback
Settings
Tips
Appendix
.
Contents
DNP-730AE
NETWORK AUDIO PLAYER
Owner’s Manual
You can print more than one page of a PDF onto a single sheet of paper.
Front panel
Rear panel
Remote control unit
1
Index
Contents
Connections
Playback
Rear panel
Remote control unit
Tips
Appendix
Connections
5
6
6
7
7
7
9
9
10
12
Accessories
Inserting the batteries
Operating range of the remote control unit
Features
High quality sound
High performance
Part names and functions
Front panel
Rear panel
Remote control unit
Front panel
Settings
Connecting an amplifier
Connecting to a device with digital audio input connectors
Connecting an iPod or USB memory device to the USB port
Connecting to a home network (LAN)
Wired LAN
Wireless LAN
Connecting to the IR control connector
Connecting the power cord
2
Index
17
18
19
21
21
22
24
25
Contents
Connections
Playback
Settings
Playback
Basic operation
Turning the power on
Selecting the input source
Listening to Internet Radio
Listening to Internet Radio
Using vTuner to add Internet Radio stations to favorites
Playing back files stored on a PC and NAS
Applying media sharing settings
Playing back files stored on a PC and NAS
Favorite function
Registering stations or files to the favorites list
Calling stations or files from the favorites list
To switch between registered stations and files during playback
Deleting stations or files from the favorite list
Playing an iPod
Listening to music on an iPod
Setting operation mode (Browse iPod mode)
Charging the iPod/iPhone
Front panel
Rear panel
Remote control unit
Tips
Appendix
Playing a USB memory device
Playing files stored on USB memory devices
AirPlay function
Playing songs from your iPhone, iPod touch or iPad
Playing iTunes music with this unit
Selecting multiple speakers (devices)
Perform iTunes playback operations with the remote control unit
of this unit
Spotify Connect function
Playing Spotify music with this unit
Remote play function
Settings required for each device
Web control function
Controlling the unit from a web control
Convenience functions
Sleep timer function
Switching the display’s brightness
27
27
27
28
29
30
32
33
34
36
37
37
37
37
38
39
40
41
3
Index
42
43
44
44
45
45
46
47
47
48
49
51
51
57
58
58
Contents
Connections
Playback
Settings
Settings
Appendix
Tips
59
61
62
62
63
64
64
64
65
65
68
68
68
69
69
Menu map
Menu operation
Inputting characters
Using the number buttons
Using the cursor buttons
General
Language
Auto-Standby
Usage Data
Firmware
Network
Network Information
Network Control
Friendly Name
Settings
Front panel
Tips
Rear panel
Remote control unit
Tips
Troubleshooting
Resetting factory settings
77
78
86
Appendix
Playing back USB memory devices
Playing back Internet Radio
Playing back files stored on PC or NAS
Last function memory
Explanation of terms
Trademark information
Specifications
Index
License
4
Index
87
89
90
91
92
97
98
101
103
Contents
Connections
Playback
Settings
Tips
Appendix
Thank you for purchasing this Denon product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
CD-ROM
(Owner’s Manual)
Safety Instructions
Notes on radio
Remote control unit
(RC-1197)
R03/AAA batteries
.
.
.
.
Quick Start Guide
.
.
.
.
.
Check that the following parts are supplied with the product.
Audio cable
Front panel
IR control cable
Rear panel
Remote control unit
5
Index
Power cord
Connections
Contents
Playback
Settings
Inserting the batteries
2
Appendix
NOTE
0 When inserting the batteries, be sure to do so in the proper direction, following the
q and w marks in the battery compartment.
0 To prevent damage or leakage of battery fluid:
Remove the rear lid in the direction of the arrow and
remove it.
0 Do not use a new battery together with an old one.
0 Do not use two different types of batteries.
0 Remove the batteries from the remote control unit if it will not be in use for long
periods.
0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Operating range of the remote control
unit
.
1
Tips
Insert two batteries correctly into the battery
compartment as indicated.
Point the remote control unit at the remote sensor when operating it.
R03/AAA batteries
Approx. 7 m
.
30°
Put the rear cover back on.
.
3
Front panel
Rear panel
Remote control unit
6
Index
30°
Contents
Connections
Playback
Settings
Tips
Appendix
Features
High quality sound
High performance
0 Audio circuit inherited from high-end devices
0 Playback of DSD and FLAC files via USB and networks
Emulating the audio circuit of a high-end SACD player, this unit provides
performance and sound quality that far exceeds its class.
This unit supports the playback of high resolution audio formats such as
DSD and FLAC 192 kHz files. It provides high quality playback of high
resolution files.
0 Equipped with jitter-reducing circuit
0 Support for High Quality Audio playback
This unit is equipped with a jitter reducing circuit to achieve even higher
definition playback. This enables you to enjoy outstanding S/N with
playback that gives you an even more live-sounding listening
experience.
WAV/FLAC/ALAC (Apple Lossless Audio Codec)/AIFF/DSD
0 Plays USB memory devices (MP3/WMA/AAC/WAV/FLAC/ALAC/
AIFF/DSD) and iPod®/iPhone®
0 High sound quality electrolytic capacitor
0 DLNA ver. 1.5 support for audio networks
The unit’s features the same audiophile-grade Denon original high
sound quality electrolytic capacitor specifically used in top-range
models.
Front panel
Rear panel
Remote control unit
7
Index
Contents
Connections
Playback
Settings
0 Support for Gapless playback
consumption
0 Equipped with a REMOTE CONTROL port that enables operation
of the newest Denon CD players and integrated amplifiers via
apps
0 Smart charging control automatically starts charging, and then
optimizes power consumption according to the state of this unit
when an iPod® is connected
0 Equipped with a Wi-Fi function that supports Wi-Fi Sharing and
WPS
0 Compatible with Denon “Hi-Fi Remote” App for performing basic
operations of the unit with an iPad®, iPhone® or Android
smartphone
0 OLED (Organic Light Emitting Diode) display that can display 3
lines
Rear panel
Remote control unit
Appendix
0 Equipped with auto standby mode function that reduces power
Playback with no gap between music files. (for WAV/FLAC/ALAC/
AIFF/DSD only)
Front panel
Tips
8
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Part names and functions
.
Front panel
q
w
e
r
t
y
u
i
SOURCE
5V/1A
A Power operation button (X)
Turns power to this unit on and off (standby).
D Display
Various information is displayed here.
B Power indicator
The power indicator changes as shown below according to the status
of the unit.
0 Power on : Green
0 Normal standby : Off
0 When “Network Control” is set to “On” : Red
(v p. 68)
0 iPod charge standby : Red
(v p. 41)
E Input source select button (SOURCE)
Selects the input source.
F Cursor buttons (uio p)
These select items.
G Playback/Pause/ENTER button (1/3/ENTER)
Plays back and pauses tracks, and enters the selected content.
H USB port
Used to connect iPod or USB memory devices. (v p. 19)
C Remote control sensor
This receives signals from the remote control unit. (v p. 6)
Front panel
Rear panel
Remote control unit
9
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Rear panel
q
w
e
AUDIO OUT
DIGITAL AUDIO
OUT
R
L
r
t
WI-FI
IR
CONNECT CONTROL
OUT
OPTICAL
IR
WPS
y
u
NETWORK
WI-FI
CONNECT
iOS
.
TO DENON
DCD OR PMA
Front panel
Rear panel
Remote control unit
10
Index
i
q
AC IN
Contents
q
Connections
Playback
w e rt y u
AUDIO OUT
DIGITAL AUDIO
OUT
R
L
WI-FI
IR
CONNECT CONTROL
NETWORK
OUT
OPTICAL
WPS
IR
Settings
i q
AC IN
TO DENON
DCD OR PMA
.
B AUDIO OUT connectors
Used to connect devices equipped with analog audio inputs connectors
or an external pre-main amplifier. (v p. 17)
C DIGITAL AUDIO OUT connector
Used to connect an AV receiver or D/A converter equipped with digital
audio input connectors. (v p. 18)
D Wi-Fi Connect Button (Wi-Fi CONNECT WPS)
Connects to a wireless LAN.
(See the separate “Quick Start Guide”.)
E IR CONTROL OUT connector
Connects to a Denon amplifier or CD player that is equipped with a
REMOTE CONTROL jack. (v p. 24)
F NETWORK connector
Used to connect this unit to the network. (v p. 21)
G Wi-Fi Connect Button (Wi-Fi CONNECT iOS)
Connects to iOS.
(See the separate “Quick Start Guide”.)
H AC inlet (AC IN)
Used to connect the supplied power cord. (v p. 25)
A Rod antennas for wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN. (v p. 22)
90°
90°
320°
.
320°
Front panel
Rear panel
Remote control unit
Appendix
The antenna clip can be removed from the rear panel.
A Rotate the antenna clip 90 degrees to the left.
B Pull the antenna clip out towards yourself.
0 The antenna clip is needed when transporting this unit. Keep it in a safe
place.
0 Attach the antenna clip by following the steps for removing it in reverse.
WI-FI
CONNECT
iOS
Tips
11
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Remote control unit
o Operating this unit
q
A Remote control signal transmitter
This transmits signals from the remote control unit. (v p. 6)
AMP
POWER
POWER
w
e
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
B POWER button (X)
This turns the power on/standby. (v p. 27)
r
ADD
FAVORITES
CALL
C Input source select buttons
These select the input source. (v p. 27)
D FAVORITES ADD / CALL buttons
0 To add radio stations or files to the favorite list, press ADD button.
(v p. 37)
0 To call up a radio station or file registered in the favorite list, press
CALL button. (v p. 37)
t
y
INFO
INPUT SELECT
TOP MENU
MUTE
AMP
VOLUME
MODE
E System buttons
These perform playback related operations. (v p. 34, 40, 43)
0 Reverse-skip / Forward-skip buttons (8, 9)
0 Play/pause button (1/3)
0 Fast-reverse / Fast-forward buttons (6, 7)
0 Stop button (2)
ENTER
SEARCH
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
F Information button (INFO)
This switches display items such as the album name and title name in
the playback screen.
(v p. 30, 34, 40, 43)
.
RANDOM
NDOM REP
REPEAT
AT
DEF
Front panel
Rear panel
Remote control unit
12
Index
Contents
Connections
Playback
Settings
Tips
Appendix
G TOP MENU button
To back to the top of the menu. (v p. 61)
H ENTER button
This determines the selection. (v p. 61)
AMP
POWER
POWER
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
I Cursor buttons (uio p)
These select items. (v p. 61)
J SEARCH button
This displays the search menu. (v p. 30, 34, 43)
K Number buttons (0 – 9, +10)
These enter letters or numbers into the unit. (v p. 62)
INFO
INPUT SELECT
TOP MENU
u
i
o
Q0
Q1
AMP
L RANDOM button
Switches the random playback. (v p. 34, 40, 43)
VOLUME
MODE
M REPEAT button
Switches the repeat playback. (v p. 34, 40, 43)
ENTER
SEARCH
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
RANDOM
NDOM REP
REPEAT
AT
DEF
.
Q2
Q3
MUTE
Front panel
Rear panel
Remote control unit
13
Index
Contents
Connections
Playback
Settings
Tips
Appendix
N MODE button
This switches the operation mode. (v p. 40)
O SETUP button
The setting menu is displayed on the display. (v p. 61)
AMP
POWER
POWER
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
P CLEAR button
This cancels the settings. (v p. 37, 63)
Q DIMMER button
Adjust the display brightness of this unit. (v p. 58)
R SLEEP button
This sets the sleep timer. (v p. 58)
INFO
INPUT SELECT
TOP MENU
MUTE
AMP
VOLUME
MODE
Q4
ENTER
SEARCH
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
Q6
Q7
Q8
.
RANDOM
NDOM REP
REPEAT
AT
Q5
DEF
Front panel
Rear panel
Remote control unit
14
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Amplifier operations
AMP
POWER
POWER
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
A Input source select buttons (INPUT SELECT df)
B MUTE button (: )
e
C AMP POWER button (X)
MUSIC
SERVER
D Amplifier volume adjustment buttons (VOLUME df)
ADD
FAVORITES
CALL
INFO
q
w
INPUT SELECT
TOP MENU
MUTE
AMP
VOLUME
r
MODE
ENTER
SEARCH
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
.
RANDOM
NDOM REP
REPEAT
AT
DEF
Front panel
Rear panel
Remote control unit
15
Index
Connections
Playback
Settings
o Contents
Appendix
o Cables used for connections
Provide necessary cables according to the devices you want to connect.
17
18
Connecting an iPod or USB memory device to the USB port
19
Connecting to a home network (LAN)
21
Connecting to the IR control connector
24
Connecting the power cord
25
Audio cable (supplied)
.
Connecting to a device with digital audio input connectors
IR control cable (supplied)
.
Connecting an amplifier
Optical cable
(Sold separately)
NOTE
LAN cable (Sold separately)
Rear panel
Remote control unit
.
0 Do not plug in the power cord until all connections have been completed.
0 Do not bundle power cords with connection cables. Doing so can result in noise.
Front panel
Tips
.
Contents
16
Index
L
L
R
R
Contents
Connections
Playback
Settings
Tips
Connecting an amplifier
Amplifier
AUDIO
IN
R
L
AUDIO OUT
DIGITAL AUDIO
OUT
R
L
R
L
R
L
WI-FI
IR
CONNECT CONTROL
OUT
OPTICAL
IR
WPS
NETWORK
WI-FI
CONNECT
AC IN
iOS
.
TO DENON
DCD OR PMA
Front panel
Rear panel
Remote control unit
17
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting to a device with digital audio input connectors
Use this connection to output digital audio signals from this unit, and convert the signals for playback using the D/A converter of a connected device.
AV receiver /
D/A converter
OPTICAL
IN
AUDIO OUT
DIGITAL AUDIO
OUT
R
L
WI-FI
IR
CONNECT CONTROL
OUT
OPTICAL
IR
WPS
NETWORK
WI-FI
CONNECT
AC IN
iOS
.
TO DENON
DCD OR PMA
Signals with a sampling frequency of 32 kHz and DSD signals cannot be output from the Digital Audio Out connector of this unit.
Front panel
Rear panel
Remote control unit
18
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an iPod or USB memory device to the USB port
You can enjoy music stored on an iPod/iPhone or USB memory device.
0 To connect an iPod/iPhone to this unit, use the USB adapter cable that was supplied with the iPod/iPhone.
0 For operating instructions, see “Playing an iPod” (v p. 38) or “Playing files stored on USB memory devices” (v p. 43).
iPod
USB memory
device
or
SOURCE
.
5V/1A
Denon does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use
that device’s supplied AC adapter.
NOTE
0 USB memory devices will not work via a USB hub.
0 It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
0 Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices.
Front panel
Rear panel
Remote control unit
19
Index
Contents
Connections
Playback
Settings
o Supported iPod/iPhone models
• iPod classic
• iPod nano
• iPod touch
.
• iPhone
Front panel
Rear panel
Remote control unit
20
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting to a home network (LAN)
You can connect this unit to your home network (LAN) to perform various
types of playbacks and operations as follows.
0 Playback of network audio such as Internet Radio and from your music
server(s)
0 Playback of music content from online streaming services
0 Using the Apple AirPlay function
0 Operation on this unit via the network
0 Firmware Update
Wired LAN
To make connections via wired LAN, use a LAN cable to connect the
router to this unit as shown in the figure below.
PC
NAS
(Network Attached
Storage)
Modem
Internet
To WAN side
To LAN port
LAN port/
Ethernet
connector
To LAN port
Router
AUDIO OUT
DIGITAL AUDIO
OUT
R
L
WI-FI
IR
CONNECT CONTROL
OUT
OPTICAL
WPS
IR
NETWORK
LAN port/
Ethernet
connector
WI-FI
CONNECT
iOS
AC IN
.
TO DENON
DCD OR PMA
For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
Front panel
Rear panel
Remote control unit
21
Index
Contents
Connections
Playback
Settings
Wireless LAN
Internet
Modem
0 Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
0 Use only a shielded STP or ScTP LAN cable which is easily available at
electronics stores. (CAT-5 or greater recommended)
0 The normal shielded-type LAN cable is recommended. If a flat-type cable or
unshielded-type cable is used, other devices could be affected by noise.
0 When using a WPS (Wi-Fi Protected Setup) compatible router, you can connect
easily to Wi-Fi by pressing the Wi-Fi CONNECT/WPS button on this unit. (See the
separate “Quick Start Guide”.)
To WAN side
.
Router with access point
Rear panel
Remote control unit
Appendix
0 With this unit, it is possible to use the DHCP and Auto IP functions to make the
network settings automatically.
0 When using this unit with the broadband router’s DHCP function enabled, this unit
automatically performs the IP address setting and other settings. When using this
unit connected to a network with no DHCP function, make the settings for the IP
address, etc., at “Network”. (v p. 68)
0 When using this unit, we recommend you use a router equipped with the following
functions:
When connecting to a wireless LAN network, stand the rod antenna for
wireless LAN connection upright on the rear panel.
See “Settings” (v p. 69) on how to connect to a wireless LAN router.
Front panel
Tips
22
Index
Contents
Connections
Playback
Settings
NOTE
0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0 This unit is not compatible with PPPoE. A PPPoE-compatible router is required if
you have a contract for a type of line set by PPPoE.
0 Do not connect a NETWORK connector directly to the LAN port/ Ethernet
connector on your computer.
0 The antenna cannot be removed.
0 Do not carry this unit by the antenna.
Front panel
Rear panel
Remote control unit
23
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting to the IR control connector
If this unit is connected to a Denon amplifier or CD player, the amp or CD player can be controlled via this unit using the Denon “Hi-Fi Remote” app.
o Connection
Use the supplied IR control cable to connect the IR CONTROL OUT
connector of this unit to REMOTE CONTROL IN connector of the amplifier
or CD player.
This unit
AUDIO OUT
DIGITAL AUDIO
OUT
R
L
WI-FI
IR
CONNECT CONTROL
OUT
OPTICAL
WPS
IR
NETWORK
WI-FI
CONNECT
iOS
AC IN
TO DENON
DCD OR PMA
0 To use this unit and amplifier by itself without connecting a CD player, connect the
IR CONTROL OUT connector of this unit to REMOTE CONTROL IN connector of
the amplifier.
0 Only the Denon amplifier or CD player which are equipped rear panel with
REMOTE CONTROL connector can be connected.
CD player
.
Amplifier
Front panel
Rear panel
Remote control unit
24
Index
IR control cable
(supplied)
IR control cable
(supplied)
Contents
Connections
Playback
Settings
Connecting the power cord
After completing all the connections, insert the power plug into the power outlet.
AC IN
Power cord(supplied)
.
To household power outlet
(AC 230 V, 50/60 Hz)
Front panel
Rear panel
Remote control unit
25
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Contents
Playback network audio/service
Basic operation
Listening to Internet Radio
Turning the power on
27
Selecting the input source
27
Playback a device
38
Playing a USB memory device
42
Rear panel
Playing back files stored on PC or NAS
32
AirPlay function
44
Spotify Connect function
47
Other functions
Playing an iPod
Front panel
28
Remote control unit
26
Favorite function
36
Remote play function
48
Web control function
51
Convenience functions
57
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Basic operation
POWER X
Input source
select buttons
Turning the power on
AMP
POWER
POWER
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
1
Press POWER X to turn on power to the unit.
You can also switch the power to standby by pressing X on the main unit.
Selecting the input source
INFO
INPUT SELECT
TOP MENU
VOLUME
MUTE
AMP
1
MODE
Press the input source select button to be played back.
The desired input source can be selected directly.
ENTER
SEARCH
SETUP
You can also select the input source by pressing SOURCE on the main unit.
1
./
4
GHI
2 ABC
3
5
DEF
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
.
RANDOM
NDOM REP
REPEAT
AT
Front panel
Rear panel
Remote control unit
27
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to Internet Radio
0 Internet Radio refers to radio broadcasts distributed over the Internet.
INTERNET
RADIO
FAVORITES
ADD/CALL
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
0 The broad cast station types and specifications supported by this unit
for playback are as follows.
0 WMA
0 MP3
1/3
2
INFO
0 MPEG-4 AAC
INFO
INPUT SELECT
TOP MENU
uio p
ENTER
SEARCH
Internet Radio stations from around the world can be received.
AMP
POWER
POWER
MUTE
AMP
VOLUME
MODE
ENTER
SEARCH
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
.
RANDOM
NDOM REP
REPEAT
AT
DEF
Front panel
Rear panel
Remote control unit
28
Index
Contents
Connections
Playback
Settings
Listening to Internet Radio
This unit memorizes the last played Internet Radio station. If you press
INTERNET RADIO to switch to the Internet Radio function from another
input source, the last Internet Radio station you listened to is played.
1
(v p. 21)
2
3
Press INTERNET RADIO.
Displays recommended Internet Radio
stations.
radiodenon.com:
Displays Internet Radio stations added to
favorites in vTuner. For instructions on how
to add to favorites in vTuner, see “Using
vTuner to add Internet Radio stations to
favorites” (v p. 30).
Recently Played :
Displays recently played Internet Radio
stations. Up to 20 stations can be stored in
“Recently Played”.
Displays Internet Radio stations searched
Search by Keyword : by keyword. For character input, see
“Inputting characters” (v p. 62).
Use ui to select the you want to play, then press
ENTER.
Country name :
Displays all Internet Radio stations that this
unit can tune in to.
Search Podcasts :
Displays Internet Radio stations in the
podcasts that this unit can tune in to.
Front panel
4
Displays typical Internet Radio stations.
Search Stations :
Rear panel
Remote control unit
Appendix
Recommended
Stations :
Prepare for playback.
0 Check the network environment, then turn on this unit’s power.
Tips
29
Use ui to select the station, then press ENTER.
Playback starts once buffering reaches “100%”.
Index
Contents
Connections
Operation buttons
Playback
Settings
Playback
2
Stop
There are many Internet Radio stations in the world, and this unit can tune
into these stations. But finding the radio station you want to hear may be
difficult, because there are too many stations. If this is the case, then
please use vTuner, an Internet Radio station search website specifically
designed for this unit. You can use your PC to search Internet Radio
stations and add them as your favorites. This unit can play radio stations
added to vTuner.
FAVORITES CALL Call from the Favorite list
FAVORITES ADD
Add to the Favorite list
SEARCH
Character search
0 If the list is not in alphabetical order, you may not
be able to perform a character search.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the file type/ bit rate and radio station
name etc.
1
vTuner.
2
3
4
NOTE
The radio station database service may be suspended or be otherwise unavailable
without notice.
Rear panel
Remote control unit
Check the MAC address of this unit. “Network
Information” (v p. 68)
0 The MAC address is necessary when you create an account for
Any characters that cannot be displayed are replaced with “.” (period).
Front panel
Appendix
Using vTuner to add Internet Radio
stations to favorites
Function
1/3
Tips
30
Use your PC to access the vTuner website (http://
www.radiodenon.com).
Enter the MAC address of this unit, then click “Go”.
Enter your E-mail address and a password of your
choice.
Index
Contents
5
Connections
Playback
Settings
Select the search criteria (genre, region, language,
etc.) of your choice.
0 You can also enter a keyword to search for a station you want to
hear.
6
7
Select the radio station of your choice from the list, and
then click the Add to Favorites icon.
Enter the name of the favorite group, then click “Go”.
A new favorite group that includes the selected radio station is
created.
0 Internet Radio stations added to favorites in vTuner can be played
from “radiodenon.com” (v p. 29) with this unit.
o Files that can be played back
See “Playing back Internet Radio” (v p. 89).
Front panel
Rear panel
Remote control unit
31
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back files stored on a PC and NAS
0 This unit can play back music files and playlists (m3u, wpl) stored on a
FAVORITES
ADD/CALL
1/3
2
89
67
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
using technologies shown below.
MUSIC
SERVER
0 Windows Media Player Network Sharing Service
0 This unit can play back the following files.
0 MP3
INPUT SELECT
MUTE
AMP
0 WAV
INFO
INFO
TOP MENU
0 MPEG-4 AAC
VOLUME
0 FLAC
MODE
0 ALAC
0 AIFF
ENTER
SEARCH
1
./
4
GHI
0 DSD
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
RANDOM
NDOM REP
REPEAT
AT
DEF
.
RANDOM
REPEAT
0 The network audio playback function of this unit connects to the server
0 WMA
uio p
ENTER
SEARCH
PC and on Network Attached Storage (NAS) that supports DLNA.
AMP
POWER
POWER
Front panel
Rear panel
Remote control unit
32
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Applying media sharing settings
Here, we apply the settings to share music files stored on a PC and NAS on the network.
If you are using a Media Server, be sure to apply this setting first.
o When using Windows Media Player 12
(Windows 7 / Windows 8)
1
2
3
Select “More streaming options...” in the “Stream”.
4
Select “Allowed” in the drop-down list for “Media
programs on this PC and remote connections...”.
5
Follow the instructions on the screen to complete the
settings.
o When using Windows Media Player 11
1
2
3
Start up Windows Media Player 12 on the PC.
Select “Allowed” in the drop-down list for “Denon
DNP-730AE”.
4
5
Start up Windows Media Player 11 on the PC.
Select “Media Sharing” in the “Library”.
Click the “Share my media” check box, select “Denon
DNP-730AE”, and then click “Allow”.
As you did in step 3, select the icon of the device (other
PCs and mobile devices) you want to use as a media
controller, and then click “Allow”.
Click “OK” to finish.
o Sharing media stored on a NAS device
Change settings on the Network Attached Storage (NAS) device to
allow this unit and other devices (PCs and mobile devices) used as
media controllers to access the NAS. For details, see the owner’s
manual that came with the NAS.
Front panel
Rear panel
Remote control unit
33
Index
Contents
Connections
Playback
Settings
Playing back files stored on a PC and
NAS
Operation buttons
2
3
4
Prepare for playback.
A Check the network environment, then turn on this unit’s power.
“Connecting to a home network (LAN)” (v p. 21)
B Prepare the computer (vComputer’s operating instructions).
Appendix
Function
1/3
Playback / Pause
0 Select a folder and press the 1/3 button to play
back all of the files in that folder.
2
Stop
89
Skip to previous track / Skip to next track
67
(Press and hold)
Fast-reverse / Fast-forward
Use this procedure to play music files or playlists.
1
Tips
FAVORITES CALL Call from the Favorite list
Press MUSIC SERVER.
FAVORITES ADD
Add to the Favorite list
Use ui to select the server including the file to be
played, then press ENTER.
SEARCH
Character search
0 If the list is not in alphabetical order, you may not
be able to perform a character search.
Use ui to select the file, then press ENTER.
RANDOM
Random playback
REPEAT
Repeat playback
0 Switching between Single-track repeat and Alltrack repeat.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the file type/bit rate, artist name, and
album title.
Playback starts once buffering reaches “100%”.
Front panel
Rear panel
Remote control unit
34
Index
Contents
Connections
Playback
Settings
o Files that can be played back
See “Playing back files stored on PC or NAS” (v p. 90).
WMA Lossless files can be played when using a server supporting transcoding, such
as Windows Media Player Ver. 11 or later.
NOTE
0 When playing back music files with your PC or NAS connected through wireless
LAN, audio may be interrupted depending on your wireless LAN environment. In
this case, play back music files with your PC or NAS connected through wired
LAN.
0 The order in which the tracks/files are displayed depends on the server
specifications. If the tracks/files are not displayed in alphabetical order due to the
server specifications, searching by the first letter may not work properly.
Front panel
Rear panel
Remote control unit
35
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Favorite function
FAVORITES
ADD/CALL
This section provides information on the Favorite function.
0 The Favorite function allows you to register your favorite broadcast
stations and files in the Favorite List in advance so that you can call and
listen to the stations or files right away, whenever you want.
0 The contents that you can register and call are Internet radio station and
music server.
0 Up to 50 items can be stored in the Favorite List.
AMP
POWER
POWER
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
89
INFO
INPUT SELECT
TOP MENU
uio
MUTE
VOLUME
AMP
MODE
ENTER
SEARCH
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
0 – 9, +10
CLEAR
.
RANDOM
NDOM REP
REPEAT
AT
DEF
Front panel
Rear panel
Remote control unit
36
Index
Contents
Connections
Playback
Settings
2
1
Press FAVORITES ADD while the Internet radio station
or file to register is played back.
Press 8 9 or ui.
Deleting stations or files from the
favorite list
Use ui to select a number to register the station or
file, and press ENTER.
“Added To Favorites” is displayed and the registration is competed.
1
2
Calling stations or files from the
favorites list
1
2
3
Press FAVORITES CALL.
Press 8 9 or ui to select the station or file that
you want to call, and press ENTER.
The respective function starts up and playback starts.
Press FAVORITES CALL.
Use ui to select the station or file that you want to
delete, and press CLEAR.
When the prompt “Delete?” appears, press ENTER.
“Deleted” is displayed and the deletion is completed.
Press o to cancel the operation.
Press 0 – 9, +10 to call files registered to the Favorite list by number.
Front panel
Rear panel
Remote control unit
Appendix
To switch between registered stations
and files during playback
Registering stations or files to the
favorites list
1
Tips
37
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing an iPod
0 You can use the USB cable provided with the iPod to connect the iPod
1/3
2
89
67
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
TOP MENU
uio p
ENTER
AMP
unit, see “Supported iPod/iPhone models” (v p. 20).
iPod/USB
VOLUME
MODE
MODE
ENTER
SEARCH
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
RANDOM
NDOM REP
REPEAT
AT
DEF
.
RANDOM
REPEAT
MUTE
0 For information on the iPod models that can be played back with this
INFO
INFO
INPUT SELECT
with the unit’s USB port and enjoy music stored on the iPod.
AMP
POWER
POWER
Front panel
Rear panel
Remote control unit
38
Index
Contents
Connections
Playback
Settings
Listening to music on an iPod
1
2
Press iPod/USB to switch the input source to “iPod/
USB”.
Operate iPod itself directly while seeing the iPod
screen to play back music.
Front panel
Rear panel
Remote control unit
Appendix
0 The iPod display modes include “Remote iPod” and “Browse iPod”. By default,
“Remote iPod”, where you directly operate the iPod itself while looking at the iPod
screen, is set.
0 To change to “Browse iPod” where operations are performed while the iPod
information is displayed on this unit, see “Setting operation mode (Browse iPod
mode)” (v p. 40).
0 You can also listen to iPod music using “AirPlay function” (v p. 44).
Connect the iPod to the USB port. (v p. 19)
“Remote iPod” is displayed on the display of this unit.
3
Tips
NOTE
0 Depending on the type of iPod and the software version, some functions may not
operate.
0 Note that Denon will accept no responsibility whatsoever for any problems arising
with the data on an iPod when using this unit in conjunction with the iPod.
39
Index
Contents
Connections
Playback
Settings
Setting operation mode (Browse iPod
mode)
Operation buttons
In this mode, various lists and screens during playback on the iPod are
displayed on the body.
This section describes the steps up to playing back tracks on the iPod in
“Browse iPod”.
1
2
Press MODE and display “Browse iPod”.
Use ui to select the file to be played, then press
ENTER.
Playback starts.
Remote iPod
Browse
iPod
Playable files Music file
P
P
Video file
z
Display mode
Active buttons Remote control
unit (This unit)
iPod
P
P
Remote control unit
Function
1/3
Playback / Pause
2
Stop
89
Skip to previous track / Skip to next track
67
(Press and hold)
Fast-reverse / Fast-forward
RANDOM
Random playback
REPEAT
Repeat playback
0 Switching between Single-track repeat and Alltrack repeat.
MODE
Switching between Browse iPod or Remote iPod
mode.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the artist name and album title.
NOTE
P
Rear panel
Appendix
0 Denon will accept no responsibility whatsoever for any loss of iPod data.
0 Depending on the type of iPod and the software version, some functions may not
operate.
z Only the sound is played.
Front panel
Tips
40
Index
Contents
Connections
Playback
Settings
Charging the iPod/iPhone
You can charge your iPod/iPhone by connecting it to USB port.
o Standby charging
If the unit enters power standby mode while the iPod/iPhone is
charging, the unit will switch to standby charging mode, and the iPod/
iPhone will continue to be charged. When in standby charging mode,
the power indicator lights turns red.
When the iPod/iPhone is fully charged, the unit automatically stops
supplying power for charging and enters normal power standby mode,
and the power indicator lights turns off.
Front panel
Rear panel
Remote control unit
41
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Playing a USB memory device
0 Playing back music files stored on a USB memory device.
1/3
2
89
67
INTE
NTERNET
RADIO
DIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
“FAT32” format.
0 This unit can play back the following files.
0 MP3
MUTE
AMP
0 WAV
INFO
INFO
TOP MENU
0 MPEG-4 AAC
VOLUME
0 FLAC
MODE
0 ALAC
0 AIFF
0 DSD
ENTER
SEARCH
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
RANDOM
NDOM REP
REPEAT
AT
DEF
.
RANDOM
REPEAT
(Media TransferProtocol) standards can be played on this unit.
0 This unit is compatible with USB memory devices in “FAT16” or
iPod/USB
0 WMA
INPUT SELECT
uio p
ENTER
SEARCH
0 Only USB memory devices conforming to mass storage class and MTP
AMP
POWER
POWER
Front panel
Rear panel
Remote control unit
42
Index
Contents
Connections
Playback
Settings
Playing files stored on USB memory
devices
1
2
3
Tips
Operation buttons
Appendix
Function
1/3
Playback / Pause
0 Select a folder and press the 1/3 button to play
back all of the files in that folder.
Connect the USB memory device to the USB port.
(v p. 19)
2
Stop
89
Skip to previous track / Skip to next track
Press iPod/USB to switch the input source to “iPod/
USB”.
67
(Press and hold)
Fast-reverse / Fast-forward
RANDOM
Random playback
REPEAT
Repeat playback
0 Switching between Single-track repeat and Alltrack repeat.
SEARCH
Character search
0 If the list is not in alphabetical order, you may not
be able to perform a character search.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the artist name and album title.
Use ui to select the file to be played, then press
ENTER.
Playback starts.
NOTE
0 Note that Denon will accept no responsibility whatsoever for any problems arising
with the data on a USB memory device when using this unit in conjunction with the
USB memory device.
o Files that can be played back
See “Playing back USB memory devices” (v p. 87).
Front panel
Rear panel
Remote control unit
43
Index
Contents
Connections
Playback
Settings
Tips
Appendix
AirPlay function
Music files stored on your iPhone, iPod touch, iPad or iTunes can be
played on this unit via the network.
Playing songs from your iPhone, iPod
touch or iPad
PC
If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can
stream music stored in your “iPhone/iPod touch/iPad” directly to this unit.
Router
1
This unit
0 For details, see your device’s manual.
2
.
3
Play the song on your iPhone, iPod touch or iPad.
' is displayed on the iPhone, iPod touch or iPad screen.
Tap the AirPlay icon '.
You can stop AirPlay playback by pressing o or choosing other input source.
To see song and artist names together, press INFO on the remote control unit.
For information about how to use iTunes, also see the Help for iTunes.
The screen may differ depending on the OS and software versions.
AirDrop
AirPlay
.
0
0
0
0
Connect your iPhone, iPod touch or iPad Wi-Fi to the
same network as this unit.
4
Front panel
Rear panel
Remote control unit
44
Select the speaker (devices) you want to use.
Index
Contents
Connections
Playback
Settings
Playing iTunes music with this unit
1
2
It is possible to play iTunes songs on your home’s AirPlay compatible
speakers (devices) other than those of this unit.
Install iTunes 10, or later, on a Mac or Windows PC that
is connected to the same network as this unit.
1
2
Turn this unit ON.
Set “Network Control” to “On” for this unit. (v p. 68)
Click the AirPlay icon ' and select “Multiple”.
Check the speakers you want to use.
NOTE
Start iTunes and click the AirPlay icon ' to select the
main unit.
.
4
Choose a song and click play in iTunes.
The music will stream to this unit.
Front panel
Rear panel
Remote control unit
Appendix
Selecting multiple speakers (devices)
When “Network Control” is set to “On”, the unit consumes more standby
power.
3
Tips
45
Index
Contents
Connections
Playback
Settings
Perform iTunes playback operations
with the remote control unit of this unit
With this unit’s remote control unit, you can perform iTunes song play,
pause, and auto search (cue) operations.
1
2
3
Select the “Edit” - “Preferences...” in the iTunes menu.
Select “Devices” in the iTunes setting window.
Check “Allow iTunes audio control from remote
speakers”, and then click “OK”.
Front panel
Rear panel
Remote control unit
46
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Spotify Connect function
Spotify is the world’s most popular streaming service. If you subscribe to
Spotify Premium, you can control your new speaker with your phone or
tablet. Because Spotify is built-in to your speaker, you can still take calls or
use other apps - the music never stops.
To try Spotify Premium free for 30 days, or learn more about Connect,
please go to www.spotify.com/connect.
Playing Spotify music with this unit
Download the “Spotify App” onto your Android or iOS device beforehand.
To play a Spotify track in this unit, you need to register in the Spotify
premium account first.
1
Spotify server
2
3
4
Launch the Spotify App.
Play back the Spotify track.
Tap the F icon to select the unit.
Control
0:13
.
Audio streaming/control
Connect the Wi-Fi settings of the iOS or Android device
in the same network as this unit.
The music will stream to this unit.
This unit
.
Spotify App
Front panel
Rear panel
Remote control unit
47
Index
4:44
Contents
Connections
Playback
Settings
Tips
Appendix
Remote play function
You can use your home network to play back with this unit music files
stored on PC, NAS, smartphones and portable audio players.
In this case, you use PC, smartphones and portable audio players for
operations.
o Roles each device plays
The following devices are used for Remote Play. As specified in the
DLNA standard, these devices are called DMC, DMS or DMR
according to their role.
Name
0 The relevant devices should comply with the DLNA (Digital Living Network
Alliance) Ver. 1.5 standard.
0 A wireless LAN environment is required for playing back music files on
smartphones or portable audio players.
0 For some smartphones, you must install an application for DLNA music playback.
Device example
0 PC
DMC
(Digital Media
Controller)
0 Smartphone
0 Portable audio
player
0 Denon Remote
Role
Performs Remote Play
operations.
DMC can also play back
music files stored on these
devices.
App
DMS
(Digital Media
Server)
DMR
(Digital Media
Renderer)
0 PC
Stores music files.
Music files stored on these
(Network Attached devices are played back with
DMC.
Storage)
0 NAS
0 This unit
Outputs audio of music files
played back through Remote
Play from speakers. DMR
cannot perform playback
operations.
o Files that can be played back
See “Playing back files stored on PC or NAS” (v p. 90).
Front panel
Rear panel
Remote control unit
48
Index
Contents
Connections
Playback
Settings
Configure the settings so that this unit (DMR) can play back music files
stored on your portable audio player. For details on the settings, see
the owner’s manual of your portable player.
You must make settings on DMC and DMS for Remote Play. Make the
following settings. Also see the owner’s manual of each device for
settings.
o Settings on this unit
o Settings on computer and NAS
Connect this unit to the DLNA network. You do not need to make other
settings.
For details on the network connection, see the provided “Quick Start
Guide”, “Connecting to a home network (LAN)” (v p. 21) and
“Settings” (v p. 69).
Make settings on computer and NAS to exchange data with DMR
devices.
For details on the settings, see “Applying media sharing
settings” (v p. 33).
o Settings on smartphones
You must install an application for DLNA music playback on your
smartphone to perform operations on DMS and this unit (DMR) with
your smartphone. The applicable application differs according to your
smartphone.
Some smartphones support DLNA music playback with the factory settings. See
the owner’s manual of your smartphone.
Rear panel
Remote control unit
Appendix
o Settings on portable audio players
Settings required for each device
Front panel
Tips
49
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Remote Play operations
Operations are different for each device, but the procedures for
preparing for Remote Play are the same. The preparation procedures
are shown below.
1
Turn on this unit.
2
Display the music file playback screen on DMC.
Press o to exit Remote Play mode.
NOTE
During Remote Play, you cannot perform playback operations with this unit. Use the
DMC device for these operations.
0 Make sure that this unit is connected to the network.
0 For PC, open Windows Media Player 12, etc.
0 For smartphones, switch to the music file playback mode.
3
Select the friendly name of this unit for the item that
sets the playback device on the playback screen.
0 The default Friendly Name of this unit is “Denon DNP-730”.
4
Start playing back a music file on DMC.
0 The function on this unit automatically switches to “Music Server”
and the Remote Play mark m appears on the display. Remote
Play starts.
Front panel
Rear panel
Remote control unit
50
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Web control function
You can control this unit from a web control screen on a web browser.
Controlling the unit from a web control
PC
1
2
This unit
Check the IP address of this unit with “Network
Information”. (v p. 68)
.
Router
Switch the “Network Control” setting to “On”.
(v p. 68)
[Network Information ]
IP Address
0 This unit and the PC need to be connected to the network properly in order to use
the web control function. “Connecting to a home network (LAN)” (v p. 21)
0 Depending on the settings of your security-related software, you may not be able
to access this unit from your PC. If this is the case, then change the settings of the
security-related software.
Front panel
Rear panel
Remote control unit
192.168.0.2
.
Checking the IP address.
3
51
Start up the web browser.
Index
Contents
4
Connections
Playback
Settings
5
Enter the IP address of this unit in browser’s address
box.
For example, if the IP address of this unit is “192.168.0.2”, enter
“http://192.168.0.2”.
w
http://192.168.0.2
Bonjour
apple
NETWORK
Yahoo! Japan
q
Appendix
When the top menu is displayed, click on the menu
item you want to operate.
NETWORK
FIRMWARE
YouTube Wikipedia news(45)
Tips
e
r
Please select the menu.
Please select the menu.
.
FIRMWARE
.
C Click when you setup network settings. (vGExample 1H)
D Click when you update firmware.
A Entering the IP address.
B If you are using the Safari web browser, you can select “Bonjour”
and directly access the unit’s web control screen from the
overview section.
By adding this unit’s IP address to the browser’s bookmark, you can display
the web control screen using the bookmark function the next time you use the
browser. If you are using a DHCP server and “Network Control” (v p. 68)
is set to “Off”, turning the power on/off changes the IP address.
Front panel
Rear panel
Remote control unit
52
Index
Contents
6
Connections
Playback
Settings
Operate.
FIRMWARE
NETWORK
Denon DNP-730AE
E To change the Friendly Name, enter the new name in the text
box and click “Set”.
F To reset the Friendly Name, click “Set Default”.
t
Friendly Name
Set
Network Connection
Select Connection
Wired
Test Connection
y
Set Default
u
Only characters that can be displayed on this unit can be set. (v p. 62)
o
n Network connection settings
i
G Click to change the network connection method. If you select
“Wi-Fi”, a new item will appear on-screen. (vGExample 2H)
H Click to change DHCP/proxy settings. (vGExample 2H)
I Click to connect using the newly applied settings.
.
[+]DHCP or Proxy
Front panel
Appendix
n Friendly Name setting
GExample 1H Network Setting 1
NETWORK
Tips
Rear panel
Remote control unit
53
Index
Contents
7
Connections
Playback
Settings
Operate.
FIRMWARE
J GExample 2H - Displayed when “Wi-Fi” is selected in G.
Select or input items as necessary, and then click “Test
Connection” to apply the changes.
0 Items displayed may vary depending on selected items and
connection status.
0 After selecting each item, wait a moment for the display to
be updated.
K GExample 2H - Displayed when “DHCP” or “Proxy” is selected
in H. When changing DHCP/proxy settings, input or select
for each item.
NETWORK
Friendly Name
Denon DNP-730AE
Set
Network Connection
Select Connection
Wi-Fi Setup
Manual
S SID
Security
Security Key
Defaullt Key
Appendix
n Network connection settings
GExample 2H Network Setting 2
NETWORK
Tips
Set Default
Wi-Fi
Manual
--None
Q0
Key1
Test Connection
[-]DHCP or Proxy
DHCP
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Proxy
Address Or Name
Address
Port
ON
OFF
192.168.000.001
255.255.255.000
000.000.000.000
000.000.000.000
000.000.000.000
To apply network connection settings, click “Test Connection” after making
changes.
Q1
ON
OFF
Address
Name
000.000.000.000
00000
.
Save DHCP Proxy Settings
Front panel
Rear panel
Remote control unit
54
Index
Contents
Connections
Playback
Settings
o Update on web screen
2
“Web control function” (v p. 51) settings must be completed in
advance on a computer belonging to the same network. For
information on obtaining update files, please contact our customer
service center.
Firmware
Click D from step 5 for the “Web control function”.
(v p. 51)
Choose File
Upload new firmware
The PC will display the following screen.
Wait for approximately 1 minute.
You can also gain access by entering the IP address shown by the
unit into a web browser.
Upload
w
.
G The web display H
FIRMWARE
Please wait...
.
G The unit’s screen display H
Front panel
Rear panel
Remote control unit
Appendix
When the following screen is displayed by the PC, click
the “Choose File” (A) button, select the update file,
and click the “Upload” (B) button.
.
1
Tips
55
Index
q
Contents
Playback
Settings
4
Click the “OK” (C) button.
Updating will begin.
Appendix
When the following screen is displayed, updating is
complete.
Firmware
Firmware
Warning:
Once started,the upload process cannot be interrupted or adorted,
in order to ensure the integrity of the Digital Media Player.
Are you sure you want to proceed?
OK
Tips
New Firmware:
xxx.fw
e
Firmware upload status: 100% completed.
The upload process finished successfully.
Please close this.
.
NOTE
.
3
Connections
Do not operate the unit while updating is in progress.
Button names may vary depending on the OS language used on your computer.
Front panel
Rear panel
Remote control unit
56
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Convenience functions
AMP
POWER
POWER
INTE
NTERNET
DIO
RADIO
iPod/USB
iPo
USB
MUSIC
SERVER
ADD
FAVORITES
CALL
Sleep timer function
58
Switching the display’s brightness
58
INFO
INPUT SELECT
TOP MENU
MUTE
AMP
VOLUME
MODE
ENTER
SEARCH
./
4
GHI
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
RANDOM
NDOM REP
REPEAT
AT
DEF
DIMMER
.
SLEEP
1
SETUP
Front panel
Rear panel
Remote control unit
57
Index
Contents
Connections
Playback
Settings
Sleep timer function
1
Press SLEEP during playback and select the setting
time.
Press DIMMER.
0 The brightness of the display switches each time the button is
pressed (4 levels).
0 The o indicator on the display lights.
If the buttons are operated when the display is turned off, information is displayed
temporarily at a low brightness level.
0 You can set the sleep timer in the range from 10 to 90 minutes in
steps of 10 minutes.
o To cancel the sleep timer
Press SLEEP to set “Sleep 1Off”.
The o indicator on the display turns off.
0 The sleep timer setting is canceled when the unit switches to standby mode.
0 To check the time remaining until the sleep timer is activated, press SLEEP.
Front panel
Rear panel
Appendix
Switching the display’s brightness
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
Tips
Remote control unit
58
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Menu map
For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
o Quick Setup
Setting items
Quick Setup
Description
Performs the network settings using a Wizard style window.
For details on the operations, see the separate “Quick Start Guide”.
Page
–
o General
Setting items
Description
Page
Language
Sets the language for display the menu.
64
Auto-Standby
Sets the unit power to standby when the unit is not in use.
64
Usage Data
Selects whether or not to send anonymous usage data to Denon.
65
Firmware
Set whether or not to check for firmware update, update the firmware, and display update and upgrade
notifications.
65
Update
Update the firmware of this unit.
65
Notifications
Set the Update, Upgrade and Alerts notification on/off.
66
Add New Feature
Display new features that can be downloaded to this unit and perform an upgrade.
66
Front panel
Rear panel
Remote control unit
59
Index
Connections
Contents
Playback
Settings
Tips
Appendix
o Network
Setting items
Description
Page
Network Information
Displays various information about the network.
68
Network Control
Performs the ON/OFF settings for the network function when in standby mode.
68
Friendly Name
Edits a name displayed on the Internet.
69
Settings
Performs the settings for a wired or wireless LAN.
69
Performs the settings for a wired LAN.
69
Performs the DHCP setting.
69
IP Address z
Performs the IP address setting.
70
Subnet Mask z
Performs the subnet mask setting.
70
Gateway
Performs the gateway setting.
70
Wired Setup
DHCP (On) or DHCP
(Off)
z
Performs the primary DNS setting.
70
Secondary DNS z
Performs the Secondary DNS setting.
70
Proxy
Performs the proxy setting.
70
Test Connection
Performs the wired LAN connection.
Primary DNS
z
Wi-Fi Setup Method
–
Performs the wireless LAN connection setting.
71
Auto-Scan
Selects and sets the wireless connections from the access point list.
71
Share Wi-Fi setting
from an iOS device
Sets the wireless connection using an iOS device. (iOS version 7 or later)
72
WPS (Wi-Fi Protected Sets the wireless connection using WPS (Wi-Fi Protected Setup).
Setup)
72
Web Browser Setup
Sets the wireless connection using web browser.
72
Manual
Sets the wireless connection manually.
75
z Displayed when the “DHCP” setting is “Off”. (v p. 69)
Front panel
Rear panel
Remote control unit
60
Index
Contents
Connections
ADD
Settings
iPod/USB
iPo
USB
FAVORITES
1
MUSIC
SERVER
CALL
2
3
4
INFO
INPUT SELECT
TOP MENU
uio p
ENTER
TOP MENU
MUTE
AMP
VOLUME
MODE
1
./
4
GHI
SETUP
2 ABC
3
5
JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
+10
0
*
CLEAR
SLEEP
DIMMER
Press SETUP.
The menu is displayed.
Use uiop to select the menu to be set or operated,
then press ENTER.
Use ui to change to desired setting.
Press ENTER to enter the setting.
0 To return to the previous item, press o.
The menu display disappears.
SETUP
0 To back to the top of the menu, during menu operation, press
TOP MENU.
DEF
.
RANDOM
NDOM REP
REPEAT
AT
Front panel
Rear panel
Appendix
0 Exiting the Menu, press SETUP while the menu is displayed.
ENTER
SEARCH
Tips
Menu operation
AMP
POWER
POWER
INTE
NTERNET
RADIO
DIO
Playback
Remote control unit
61
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Inputting characters
On this unit, you can change the name displayed on the following screens to the names that you prefer.
0 Text Search (v p. 29, 34, 43)
0 Friendly Name (v p. 69)
0 Character input for the network functions (v p. 29)
3
Using the number buttons
1
Press 0 – 9, +10 until the desired character is
displayed.
0 The types of characters that can be input are as shown below.
Display the screen for inputting characters.
0 To change a character, use op to align the cursor with the
character that you want to change.
Press +10 to select the character type (upper case,
lower case, or numeric characters).
mnoMNO6
abcABC2
pqrsPQRS7
defDEF3
tuvTUV8
ghiGHI4
wxyzWXYZ9
jklJKL5
0 ( Space ) ! “ # $
%&‘()z+,;<=
>?[\]^`{|}
.
2
[email protected]_/:
4
Front panel
Rear panel
Remote control unit
62
Repeat steps 2 and 3 to change the name then press
ENTER to register it.
Index
Contents
Connections
Playback
Settings
3
Using the cursor buttons
1
0 Press CLEAR to delete the character.
0 Press 9 to insert a space.
0 To change a character, use op to align the cursor with the
Use ui to change the character.
0 The types of characters that can be input are as shown below.
GLower caseH
abcdefghijklmnopqrstuvwxyz
GUpper caseH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
!“#$%&‘()z+,-./:;<=>[email protected]
[\]^_`{|}~
GNumbersH 0123456789 (Space)
.
GSymbolsH
Front panel
Rear panel
Remote control unit
63
Appendix
Repeat step 2 to change the name then press ENTER to
register it.
Display the screen for inputting characters.
character that you want to change.
2
Tips
Index
Contents
Connections
Playback
Settings
Tips
Appendix
General
Make various other settings.
Language
Auto-Standby
Set the language for display on the menu.
When “Auto-Standby” is set to “On”, and no operations are made in the
stopped state for the set amount of time, this unit automatically enters
standby mode.
When the input source is “Remote iPod” and no operation is performed for
eight hours, this unit automatically enters the standby mode.
English / Deutsch / Française / Italiano / Nederlands / Español /
Svenska / Русский / Polski (Default : English)
Front panel
Rear panel
Remote control unit
64
1min / 5min /
15min
(Default) /
Other:
When “Other” is selected, the “Auto-Standby” time can
be set within the range of 1 - 99 minutes. Select the
value using ui and then press ENTER to enter the
setting value.
Off:
The unit does not go into standby automatically.
Index
Contents
Connections
Playback
Settings
Appendix
Firmware
Usage Data
Set whether or not to check for firmware update, update the firmware, and
display update, upgrade and alert notifications.
For product improvement purposes, please send information on the
device settings and operating conditions of the functions to Denon.
Information provided by customers will be used as reference material for
product development purposes in the future.
Denon will never provide any information we collect to third parties.
o Update
Update the firmware of this unit.
Check For Update:
Check for firmware updates.
Yes: Provide information on the operating status of this unit.
No:
Tips
Update Start:
Do not provide information on the operating status of this unit.
Execute the update process.
Even if the update fails, this unit will automatically try to update again.
Front panel
Rear panel
Remote control unit
65
Index
Contents
Connections
Playback
Settings
o Notifications
Appendix
o Add New Feature
Notification messages are displayed in the screen when the power is
switched on when new firmware can be used, or when there are other
notification messages.
Display new features that can be downloaded to this unit and perform
an upgrade.
Update
On (Default):
Display update message.
Off:
Do not display update message.
On (Default):
Display upgrade message.
Off:
Do not display upgrade message.
Displays notification messages from Denon in the
popup menu.
Off:
Does not display notification messages from Denon in
the popup menu.
Rear panel
Remote control unit
Display the items to be upgraded.
Upgrade
Status:
Display a list of the additional functions provided by
the upgrade.
Upgrade ID:
Notification Alerts
On (Default):
Upgrade
package:
Execute the upgrade process. When the upgrade
starts, the menu screen is shut down. During the
Upgrade Start:
upgrade, the amount of upgrade time which has
elapsed is displayed.
Upgrade
Front panel
Tips
The ID number shown on the display is needed
when carrying out the procedure.
0 See the Denon website for details about upgrades.
0 When the procedure is complete, “Registered” is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, “Not
Registered” is displayed.
66
Index
Contents
Connections
Playback
Settings
Notes concerning use of “Update” and “Add New Feature”
0 In order to add new functions, the environment and settings required
for connecting to broadband internet are needed. (v p. 21)
0 Perform the add new feature operation after at least 2 minutes has
elapsed since turning this unit’s power on.
0 Do not turn off the power until updating or upgrading is completed.
0 Even with a broadband connection to the Internet, approximately 20
minutes is required for the updating/upgrading procedure to be
completed.
0 Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed. Furthermore,
updating/upgrading the firmware may reset the backup data for the
parameters, etc. set for this unit.
0 When the update or upgrade failed with a message such as “Update
failed” and “Download failed”, remove and re-insert the power cord.
“Update Retry” appears on the display and update restarts from the
point at which update failed. If the error continues despite this, check
the network environment.
Information regarding the “Update” function and “Add New Feature” will be
announced on the Denon web site each time related plans are defined.
Front panel
Rear panel
Remote control unit
67
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Network
To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network via DHCP, set “DHCP” to
On (use the default setting). This allows this unit to use your home network.
If you assign an IP address for each device, you must use the “IP Address” setting to assign an IP address to this unit and enter the information about your
home network such as the gateway address and subnet mask.
Network Information
Network Control
Display network information.
Enables network communication in standby power mode.
Friendly Name / DHCPOn or Off / IP Address / MAC Address /
SSIDz
z This is displayed only while a Wi-Fi connection is enabled.
On:
The network function can be used when in standby power
mode. Main unit operable with a network compatible
controller.
Off (Default):
The network function cannot be used in standby power
mode.
Set to “On” when using the web control function or a network compatible controller.
NOTE
When “Network Control” is set to “On”, the unit consumes more standby power.
Front panel
Rear panel
Remote control unit
68
Index
Contents
Connections
Playback
Settings
Friendly Name
Appendix
Settings
The Friendly Name is the name of this unit displayed on the network. You
can change the Friendly Name according to your preferences.
You can make detailed settings for the network.
To change the network environment, perform “Quick Setup”. (For details
on the operations, see the separate “Quick Start Guide”.)
0 If you are using a broadband router (DHCP function), there is no need to
make the settings at “IP Address” and “Proxy”, since the DHCP function
is set to “On” in this unit’s default settings.
0 Only set “Settings” when connecting to a network without a DHCP
function.
o Friendly Name
When you press ENTER, you can change the Friendly Name
according to your preferences.
0 Up to 63 characters can be input.
0 For character input, see “Inputting characters” (v p. 62).
0 The default Friendly Name on first use is “Denon DNP-730AE”.
o When making wired connection
n DHCP
o Default
Selects how to connect to the network.
Configure the network settings automatically from your
On (Default):
router.
Restores Friendly Name, which you had changed, to the default
setting.
Off:
Front panel
Tips
Rear panel
Remote control unit
69
Configure the network settings manually.
Index
Contents
Connections
Playback
Settings
n IP Address
Appendix
n Proxy
Set the IP address within the ranges shown below.
0 The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.1 - 10.255.255.254
CLASS B: 172.16.0.1 - 172.31.255.254
CLASS C: 192.168.0.1 - 192.168.255.254
Make this setting when connecting to the Internet via a proxy server.
Make the proxy settings only when you connect to the Internet via a
proxy server that is on your internal network or provided by your
provider, etc.
Proxy (Off) or Proxy (On): Set the proxy server.
n Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
n Gateway
Proxy (Address) or Proxy
(Name):
Select when inputting by address or
domain name.
Address or Name:
Inputting address or domain name. Up
to 38 characters can be input.
Port:
Enter port number.
0 If you cannot connect to the Internet, recheck the connections and settings.
(v p. 21)
0 If you do not understand about Internet connection, contact your ISP (Internet
Service Provider) or the store from which you purchased your computer.
When connected to a gateway (router), input its IP address.
n Primary DNS, Secondary DNS
If there is only one DNS address indicated in the documentation
supplied by your provider, enter it for “Primary DNS”. If two or more
DNS are provided by your provider, enter one for “Secondary DNS”.
Front panel
Tips
Rear panel
Remote control unit
70
Index
Contents
Connections
Playback
Settings
o When making Wi-Fi connection
Tips
n Auto-Scan
This automatically searches for networks.
In this menu, Wi-Fi settings and connections can be made using any of
the five connection methods
Auto-Scan / Share Wi-Fi setting from an iOS device / WPS (Wi-Fi
Protected Setup) / Web Browser Setup / Manual
1
From the list of the networks, select the one you want
to connect to.
0 Select “Rescan” if the network cannot be found.
2
0 If a LAN cable is connected, remove it.
0 See the Quick Setup Guide for details on how to connect to Wi-Fi using the
Wi-Fi CONNECT button on the rear panel.
Make the following settings.
Default Key:
Select the default key.
0 When connecting to a WEP encrypted
network, “Default Key” menu is displayed.
Password:
Input the password.
DHCP/Proxy:
Performs the DHCP and proxy setting.
(v p. 69, 70)
Test Connection: Test the connection.
Front panel
Rear panel
Appendix
Remote control unit
71
Index
Contents
Connections
Playback
Settings
n Share Wi-Fi setting from an iOS device
Use a web browser to set up Wi-Fi.
A Wi-Fi device that can perform web browse operations is required.
1
2
Read the precautions on the screen, and press ENTER.
Select “Denon DNP-730AE” from the Wi-Fi network list
of the Wi-Fi device.
The IP address (192.168.1.16) appears on the unit.
The iOS version must be 7 or later.
n WPS (Wi-Fi Protected Setup)
Register the PIN code of the unit in the router.
Front panel
Rear panel
Remote control unit
Appendix
n Web Browser Setup
You can use an iOS device such as an iPhone or iPad to configure WiFi settings.
After selecting this item, select Settings/Wi-Fi from the iOS device
home screen, select “Denon DNP-730AE” displayed at the bottom of
the screen, and then follow the setting instructions displayed on the
iOS device.
For details, see the “Quick Start Guide”.
1
Tips
72
Index
Contents
Playback
Settings
4
Enter the IP address of this unit in browser’s address
box.
w
http://192.168.1.16
Bonjour
Yahoo! Japan
Tips
NETWORK
q
e
Please select the menu.
YouTube Wikipedia news(45)
Please select the menu.
C Click “NETWORK”. (vGExample 1H)
A Entering the IP address (192.168.1.16).
B If you are using the Safari web browser, you can select “Bonjour”
and directly access the unit’s web control screen from the
overview section.
Front panel
Rear panel
Remote control unit
73
Appendix
When the top menu is displayed, click “NETWORK”.
.
NETWORK
apple
.
3
Connections
Index
Contents
5
Connections
Playback
Settings
Operate.
Appendix
GExample 2H Network Setting 2
GExample 1H Network Setting 1
NETWORK
NETWORK
Tips
NETWORK
NETWORK
Friendly Name
Denon DNP-730AE
Friendly Name
Network Connection
Select Connection
Manual
SSID
Security
Security Key
Defaullt Key
Denon DNP-730AE
Network Connection
Select Connection
Select Connection
r
Test Connection
Wi-Fi
--None
t
Key1
.
.
Test Connection
n Network connection settings
n Network connection settings
D Click to change the network connection method. If you select
“Wi-Fi”, a new item will appear on-screen.
(vGExample 2H)
E GExample 2H - Displayed when “Wi-Fi” is selected in D. Select or
input items as necessary, and then click “Test Connection” to apply
the changes.
0 Items displayed may vary depending on selected items and
connection status.
0 After selecting each item, wait a moment for the display to be
updated.
To apply network connection settings, click “Test Connection” after making
changes.
Front panel
Rear panel
Remote control unit
74
Index
Contents
Connections
Playback
Settings
n Manual
Sets the wireless connection manually
SSID :
Input the name of the wireless network (SSID).
Security:
Select the encryption method according to the
encryption setting of the access point you are
using.
Default Key:
Select the Default Key.
0 When connecting to a “WEP” encrypted
network, “Default Key” menu is displayed.
Password:
Input the password.
DHCP/Proxy:
Performs the DHCP and proxy setting. (v p. 69,
70)
Test Connection: Test the connection.
Front panel
Rear panel
Remote control unit
75
Index
Tips
Appendix
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
Troubleshooting
Tips
Power does not turn on / Power is turned off
Simple operations in the power off state
77
LED is flashing
78
79
79
I only want to recharge my iPod
77
Operations cannot be performed through the remote control unit
Changing or resetting the network environment
77
Display on this unit shows nothing
I want to display the title, etc. of the file currently playing back on the
iPod on this unit’s display
77
Front panel
Rear panel
Remote control unit
78
76
No sound comes out
79
Sound is interrupted or noise occurs
80
iPod cannot be played back
81
USB memory devices cannot be played back
82
File names on the iPod/USB memory device are not displayed
properly
82
The Internet radio cannot be played back
83
Music files on PC or NAS cannot be played back
84
Cannot connect by Wi-Fi
85
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Tips
Simple operations in the power off state
0 When the “Network Control” is set to “On”, you can perform playback, or other operations through AirPlay, Denon “Hi-Fi Remote” app. (v p. 68)
I only want to recharge my iPod
0 Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged. (v p. 41)
Changing or resetting the network environment
0 Prepare the provided Quick Start Guide, and run “Quick Setup” from the setup menu. For detailed settings, run Setup - “Network” - “Settings”.
(v p. 69)
I want to display the title, etc. of the file currently playing back on the iPod on this unit’s display
0 Press the MODE button to set Browse iPod mode. (v p. 40)
Front panel
Rear panel
Remote control unit
77
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Troubleshooting
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o Power does not turn on / Power is turned off
Symptom
Cause / Solution
Page
Power does not turn on.
0 Check whether the power plug is correctly inserted into the power outlet.
25
Power automatically turns
off.
0 The sleep timer is set. Turn on the power again.
58
0 “Auto-Standby” is set. “Auto-Standby” is triggered when there is no operation for a set amount of time. To
64
Cause / Solution
Page
disable “Auto-Standby”, set “Auto-Standby” on the menu to “Off”.
o LED is flashing
Symptom
Flashing red.
Front panel
0 A circuit in the unit has malfunctioned. Disconnect the power and contact the repair center.
Rear panel
Remote control unit
78
Index
-
Contents
Connections
Playback
Settings
Tips
Appendix
o Operations cannot be performed through the remote control unit
Symptom
Operations cannot be
performed through the
remote control unit.
Cause / Solution
0 Batteries are worn out. Replace with new batteries.
Page
6
0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
6
0 Remove any obstacle between this unit and the remote control unit.
-
0 Insert the batteries in the proper direction, checking the q and w marks.
6
0 The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb
-
0 When using a 3D video device, the remote control unit of this unit may not function due to effects of
-
light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
direction of units with the 3D communications function and their distance to ensure they do not affect
operations from the remote control unit of this unit.
o Display on this unit shows nothing
Symptom
Display is off.
Cause / Solution
0 Press the DIMMER button on the remote control to set any setting other than OFF.
Page
58
o No sound comes out
Symptom
No sound comes out of
speakers.
Front panel
Cause / Solution
0 Check the connections for all devices.
Page
16
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Check that a proper input source is selected.
27
Rear panel
Remote control unit
79
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Sound is interrupted or noise occurs
Symptom
During playback from the
Internet radio or USB
memory device, sound is
occasionally interrupted.
When making a call on
iPhone, noise occurs in
audio output on this unit.
Cause / Solution
-
0 The network communication speed is slow or the radio station is busy.
-
0 When making a call, keep a distance of 20 cm or longer between iPhone and this unit.
-
Sound cuts out when using 0 If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN
Wi-Fi connection.
connection.
0 Particularly when you play back large music files, depending on your wireless LAN environment, the
playback sound may be interrupted. In this case, make the wired LAN connection.
Front panel
Page
0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
Rear panel
Remote control unit
80
Index
21
21
Contents
Connections
Playback
Settings
Tips
Appendix
o iPod cannot be played back
Symptom
Cause / Solution
iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported.
Page
20
0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be
-
0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to
21
0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to
-
No sound is produced.
0 The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon ' on the
44
Audio is interrupted during
the AirPlay playback on
iPhone / iPod touch / iPad.
0 Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using
-
0 Some external factors may be affecting the wireless connection. Modify the network environment by
-
0 Enable the “Allow iTunes audio control from remote speakers” setting on iTunes. Then, you can perform
-
recognized. Use a genuine USB cable.
The AirPlay icon ' is not
displayed on iTunes /
iPhone / iPod touch / iPad.
the same LAN as this unit.
the latest version.
iTunes / iPhone / iPod touch / iPad screen and select this unit.
AirPlay.
taking measures such as shortening the distance from the wireless LAN access point.
iTunes cannot be played
back through the remote
control unit.
Front panel
playback, pause, and skip operations through the remote control unit.
Rear panel
Remote control unit
81
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o USB memory devices cannot be played back
Symptom
“No Connection” is
displayed.
Cause / Solution
0 The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device.
0 USB memory devices of a mass storage class or those compatible with MTP are supported.
-
-
0 The USB memory device must be formatted to FAT16 or FAT32.
-
0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
-
0 Files of a type not supported by this unit are not displayed.
42
0 This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in total. Modify
-
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
the folder structure of the USB memory device.
Files on a USB memory
device cannot be played.
19
0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
Files on the USB memory
device are not displayed.
Page
0 When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
-
0 Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
42
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
-
played on this unit.
o File names on the iPod/USB memory device are not displayed properly
Symptom
The file names are not
displayed properly (“…”,
etc.).
Front panel
Cause / Solution
0 Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that
cannot be displayed are replaced with a “.” (period).
Rear panel
Remote control unit
82
Index
Page
-
Contents
Connections
Playback
Settings
Tips
Appendix
o The Internet radio cannot be played back
Symptom
Cause / Solution
Page
The radio station list is not
displayed.
0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status.
21
Internet Radio cannot be
played.
0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can
89
be played back in this unit are MP3, WMA and AAC.
0 The firewall function is enabled on the router. Check the firewall setting.
-
0 The IP address is not properly set.
69
0 Check the power of the router is on.
-
0 To obtain the IP address automatically, enable the DHCP server function on the router. Also, set the
69
0 To obtain the IP address manually, set the IP address and proxy on this unit.
69
0 Some radio stations broadcast silently during some time period. In this case, no audio is output. Wait for a
29
Cannot connect to favorite
radio stations.
0 Radio station is not currently in service. Register radio stations in service.
-
For some radio stations,
“Connection Down” is
displayed and station
cannot be connected to.
0 The selected radio station is not in service. Select a radio station in service.
-
DHCP setting to “On” on this unit.
while and select the same radio station, or select another radio station.
Front panel
Rear panel
Remote control unit
83
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Music files on PC or NAS cannot be played back
Symptom
Files stored on a computer
cannot be played.
Cause / Solution
90
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
-
played on this unit.
0 The set’s USB port cannot be used for connection to a computer.
-
0 Media sharing settings are not correct. Change media sharing settings so that the unit can access the
33
folders on your computer.
Server is not found, or it is
not possible to connect to
the server.
Music files on PC cannot
be played back.
Page
0 Files are stored in a non-compatible format. Record in a compatible format.
0 The computer’s or router’s firewall is activated. Check the computer’s or router’s firewall settings.
-
0 Computer’s power is not turned on. Turn on the power.
-
0 Server is not running. Launch the server.
-
0 Set’s IP address is wrong. Check the set’s IP address.
68
0 Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC
21
to this unit through the network.
Files on PC or NAS are not 0 Files of a type not supported by this unit are not displayed.
displayed.
90
Music stored on a NAS
cannot be played.
0 If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in the NAS
-
0 If you use a NAS that does not conform with the DLNA standard, play the music via a PC. Set Windows
33
0 If connection is restricted, set audio equipment as the connection target.
-
setting.
Media Player’s media sharing function and add NAS to the selected play folder.
Front panel
Rear panel
Remote control unit
84
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Cannot connect by Wi-Fi
Symptom
Cannot connect to the
network.
Cause / Solution
74
0 Reduce the distance between the wireless LAN access point and this unit, remove any obstructions and
-
0 Check the router power supply.
-
according to the setting details of this unit.
make sure the view to the access point is unobstructed before trying to connect again. Also, install
microwave ovens and other network access points as far away as possible.
Cannot connect to WPS.
0 This unit supports IEEE802.11.b/g/n.
-
0 Configure the access point channel settings away from channels that are being used by other networks.
-
0 This unit is not compatible with WEP (TSN).
-
0 Check that the WPS mode of the router is operating.
-
0 Press and hold the Wi-Fi CONNECT button on this unit for approximately 3 seconds within 2 minutes of
-
0 A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to
69
0 If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the Wi-Fi
60
0 Update the iPhone/iPod touch/iPad firmware to the latest version.
-
operating the router.
“None”, “WPA-PSK (AES)” or “WPA2-PSK (AES)”.
CONNECT/WPS button. In this case, use the “Auto-Scan” or “Manual” method to connect.
Cannot connect to the
network using iPhone/iPod
touch/iPad.
Front panel
Page
0 The network name and password (WEP, etc.) settings are wrong. Configure the network settings
Rear panel
Remote control unit
85
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Various settings are reset to the factory default values. Make settings again.
X
SOURCE
1
2
uio p
When power is switched to standby.
Press the power button (X) while pressing i and
SOURCE together on this unit.
“Initialized” appears on the display.
SOURCE
5V/1A
.
If “Initialized” does not display in step 3, start over from step 1.
Front panel
Rear panel
Remote control unit
86
Index
Contents
Connections
Playback
Settings
Sampling
frequency
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit is compatible with WMA META tags.
0 If the image size of an album artwork exceeds 600 kB, then music may
not be played back properly.
WMAz1
32/44.1/48 kHz
MP3
32/44.1/48 kHz
WAV
32/44.1/48/
88.2/96/176.4/
192 kHz
MPEG-4 AACz1
32/44.1/48 kHz
FLAC
ALACz2
AIFF
DSD (2channel)
Rear panel
Remote control unit
Appendix
o Compatible formats
Playing back USB memory devices
Front panel
Tips
87
Index
32/44.1/48/
88.2/96/176.4/
192 kHz
32/44.1/48/
88.2/96kHz
32/44.1/48/
88.2/96/176.4/
192 kHz
2.8/5.6 MHz
Bit
length
Extension
–
.wma
–
.mp3
–
16/24 bits
.wav
16 – 320
kbps
–
.aac/
.m4a/
.mp4
–
16/24 bits
.flac
–
16/24 bits
.m4a
–
–
.aif/
.aiff
Bit rate
48 – 192
kbps
32 – 320
kbps
–
.dsf/
.dff
Contents
Connections
Playback
Settings
Tips
Appendix
o Maximum Number of Playable Files and Folder
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
z2 Copyright [2012] [D&M Holdings. Inc.] Licensed under the Apache License,
Version 2.0 (the “License”); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
The limits on the number of folders and files that can be displayed by
this unit are as follows.
Media
Item
Memory capacity
Number of folder directory
levels z1
Signals with a sampling frequency of 32 kHz and DSD signals cannot be output from
the Digital Audio Out connector of this unit.
USB memory device
FAT16 : 2 GB, FAT32 : 2 TB
8 levels
Number of folders
500
filesz2
5000
Number of
z1 The limited number includes the root folder.
z2 The allowable number of files may differ according to the USB memory device
capacity and the file size.
Front panel
Rear panel
Remote control unit
88
Index
Contents
Connections
Playback
Settings
Playing back Internet Radio
o Playable broadcast station specifications
Sampling
frequency
Bit rate
Extension
WMA
32/44.1/48 kHz
48 – 192
kbps
.wma
MP3
32/44.1/48 kHz
32 – 320
kbps
.mp3
MPEG-4 AAC
32/44.1/48 kHz
16 – 320 kbps
.aac/
.m4a/
.mp4
Front panel
Rear panel
Remote control unit
89
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Sampling
frequency
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit is compatible with WMA META tags.
0 If the image size of an album artwork exceeds 600 kB, then music may
not be played back properly.
0 A server or server software compatible with distribution in the
WMAz1
32/44.1/48 kHz
MP3
32/44.1/48 kHz
WAV
32/44.1/48/
88.2/96/176.4/
192 kHz
MPEG-4 AACz1
32/44.1/48 kHz
corresponding formats is required to play music files via a network.
Particularly when you play back large music files, depending on your wireless LAN
environment, the playback sound may be interrupted. In this case, make the wired
LAN connection.
FLAC
ALACz2
AIFF
DSD (2-channel)
Rear panel
Remote control unit
Appendix
o Playback file specifications
Playing back files stored on PC or
NAS
Front panel
Tips
90
Index
Bit
length
Extension
–
.wma
–
.mp3
–
16/24 bits
.wav
16 – 320
kbps
–
.aac/
.m4a/
.mp4
Bit rate
48 – 192
kbps
32 – 320
kbps
32/44.1/48/
88.2/96/176.4/
192 kHz
32/44.1/48/
88.2/96kHz
32/44.1/48/
88.2/96/176.4/
192 kHz
–
16/24 bits
.flac
–
16/24 bits
.m4a
–
–
.aif/
.aiff
2.8/5.6 MHz
–
.dsf/
.dff
Contents
Connections
Playback
Settings
This stores the settings as they were immediately before going into the
standby mode.
When the power is turned back on, the settings are restored to as they
were immediately before going into the standby mode.
Signals with a sampling frequency of 32 kHz and DSD signals cannot be output from
the Digital Audio Out connector of this unit.
Rear panel
Remote control unit
Appendix
Last function memory
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
z2 Copyright [2012] [D&M Holdings. Inc.] Licensed under the Apache License,
Version 2.0 (the “License”); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Front panel
Tips
91
Index
Connections
Contents
Playback
Settings
Explanation of terms
FLAC stands for Free lossless Audio Codec, and is a lossless free audio
file format. Lossless means that the audio is compressed without any loss
in quality.
The FLAC license is as shown below.
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006,2007, 2008,
2009 Josh Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
ALAC (Apple Lossless Audio Codec)
This is a codec for lossless audio compression method developed by
Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data
compressed to approximately 60 – 70% can be decompressed to exactly
the same original data.
AIFF (Audio Interchange File Format)
This is an uncompressed and lossless format for digital audio. Use AIFF
files to burn high-quality audio CDs from imported songs. AIFF files use
approximately 10 MB of disk space per minute.
DSD (Direct-Stream Digital)
One of the audio data recording methods, it is the signal aspect used to
store audio signals on a super audio CD, and is Δ-Σ modulated digital
audio. It is configured of an array of single bit values at a 2.8224 MHz
sampling rate.
Rear panel
Appendix
FLAC
o Audio
Front panel
Tips
Remote control unit
92
Index
Contents
Connections
Playback
Settings
Tips
Appendix
MP3 (MPEG Audio Layer-3)
Sampling frequency
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the data
volume to about one eleventh its original size while maintaining sound
quality equivalent to a music CD.
Sampling involves taking a reading of a sound wave (analog signal) at
regular intervals and expressing the height of the wave at each reading in
digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is to the
original.
MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4
These are the names for digital compression format standards used for
the encoding of video and audio. Video standards include “MPEG-1
Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”.
Bit rate
This expresses the read amount per 1 second of video/audio data
recorded. A larger number means higher sound quality, but also means a
larger file size.
WMA (Windows Media Audio)
This is audio compression technology developed by Microsoft
Corporation.
WMA data can be encoded using Windows Media® Player. To encode
WMA files, only use applications authorized by Microsoft Corporation. If
you use an unauthorized application, the file may not work properly.
Front panel
Rear panel
Remote control unit
93
Index
Contents
Connections
Playback
Settings
o Network
Tips
Appendix
IEEE 802.11b
AES (Advanced Encryption Standard)
This is one wireless LAN standard set by the 802 working group that
establishes LAN technology standards at the IEEE (Institute of Electrical
and Electronics Engineers) of the United States. It uses the 2.4 GHz band
usable freely without a radio frequency license (ISM band), enabling
communications at a maximum speed of 11 Mbps.
The value indicated above is the maximum theoretical value for the
wireless LAN standard, and does not indicate the actual data transfer rate.
This is a next generation standard encryption method replacing the current
DES and 3DES, and because of its high security it is expected to be
applied widely to wireless LANs in the future. It uses the “Rijndael”
algorithm developed by two Belgian cryptographers to divide the data into
blocks of fixed lengths and encrypt each block. It supports data lengths of
128, 192 and 256 bits and key lengths of 128, 192 and 256 bits as well,
offering extremely high encryption security.
IEEE 802.11g
This is another wireless LAN standard set by the 802 working group that
establishes LAN technology standards at the IEEE (Institute of Electrical
and Electronics Engineers) of the United States, and is compatible with
IEEE 802.11b. It also uses the 2.4 GHz band, but enables
communications at a maximum speed of 54 Mbps.
The value indicated above is the maximum theoretical value for the
wireless LAN standard, and does not indicate the actual data transfer rate.
AirPlay
AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod
touch/iPad to a compatible device via the network.
DLNA
DLNA and DLNA CERTIFIED are trademarks and/or service marks of
Digital Living Network Alliance. Some contents may not be compatible
with other DLNA CERTIFIED® products.
IEEE 802.11n
This is another wireless LAN standard set by the 802 working group that
establishes LAN technology standards at the IEEE (Institute of Electrical
and Electronics Engineers) of the United States, and is compatible with
IEEE 802.11a/bg. It uses the 2.4/5 GHz band, enabling communications at
a maximum speed of 600 Mbps.
The value indicated above is the maximum theoretical value for the
wireless LAN standard, and does not indicate the actual data transfer rate.
Front panel
Rear panel
Remote control unit
94
Index
Contents
Connections
Playback
Settings
Tips
Appendix
TKIP (Temporal Key Integrity Protocol)
WEP Key (network key)
This is a network key used for WPA. The encryption algorithm is RC4, the
same as for WEP, but the security level is increased by changing the
network key used for encryption for each packet.
This is key information used for encrypting data when conducting data
transfer. On this unit, the same WEP key is used for data encryption and
decryption, so the same WEP key must be set on both devices in order for
communications to be established between them.
vTuner
Wi-Fi®
This is a free online content server for Internet Radio.
For inquiries about this service, visit the vTuner site below.
vTuner website:
http://www.radiodenon.com
This product is protected by certain intellectual property rights of Nothing
Else Matters Software and BridgeCo. Use or distribution of such
technology outside of this product is prohibited without a license from
Nothing Else Matters Software and BridgeCo or an authorized subsidiary.
Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi
Alliance, a group certifying interoperability among wireless LAN devices.
WPA (Wi-Fi Protected Access)
This is a security standard established by the Wi-Fi Alliance. In addition to
the conventional SSID (network name) and WEP key (network key), it also
uses a user identification function and encrypting protocol for stronger
security.
WPA2 (Wi-Fi Protected Access 2)
This is a new version of the WPA established by the Wi-Fi Alliance,
compatible with more secure AES encryption.
Front panel
Rear panel
Remote control unit
95
Index
Contents
Connections
Playback
Settings
This is a simple authentication system for mutual authentication when a
preset character string matches on the wireless LAN access point and
client.
iTunes
iTunes is the name of the multimedia player provided by Apple Inc.
It enables management and playback of multimedia contents including
music and movies. iTunes supports many main file formats including AAC,
WAV, and MP3.
WPS (Wi-Fi Protected Setup)
This is a standard drawn up by the Wi-Fi Alliance to ease the task of
setting up wireless LAN connections and configuring security.
There are two methods: push-button and PIN (Personal Identification
Number) code.
Windows Media Player
This is a media player distributed free of charge by Microsoft Corporation.
It can play playlists created with Ver.11 or later of Windows Media Player,
as well as WMA, DRM WMA, WAV, and other files.
Network Names (SSID: Security Set Identifier)
o Others
When forming wireless LAN networks, groups are formed to prevent
interference, data theft, etc. These groups are based on “SSID (network
names)”. For enhanced security, a WEP key is set so that communication
is unavailable unless both the “SSID” and the WEP key match. This is
suitable for temporarily constructing a simplified network.
Rear panel
Appendix
o Media player
WPA-PSK/WPA2-PSK (Pre-shared Key)
Front panel
Tips
Remote control unit
App Store
App Store is a site that sells application software for such devices as the
iPhone or iPod Touch, and is operated by Apple Inc.
96
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Trademark information
.
.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod, or iPhone,
respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this
accessory with iPod, or iPhone, may affect wireless performance.
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic, iPod nano,
iPod shuffle and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
0 Individual users are permitted to use iPhone, iPod, iPod classic, iPod
nano, iPod shuffle, and iPod touch for private copy and playback of
non-copyrighted contents and contents whose copy and playback is
permitted by law. Copyright infringement is prohibited by law.
Front panel
Rear panel
Remote control unit
.
The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi
Alliance.
Wi-Fi Certification provides assurance that the device has passed the
interoperability test conducted by the Wi-Fi Alliance, a group that certifies
interoperability among wireless LAN devices.
Adobe, the Adobe logo and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
97
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Specifications
o Audio section
0 Analog output
[PCM]
[DSD]
Channels:
2 channels
2 channels
Playable frequency range:
2 Hz – 96 kHz
2 Hz – 100 kHz
Playable frequency response:
2 Hz – 96 kHz
(Sampling frequency: 192 kHz)
2 Hz – 20 kHz
(Sampling frequency: 44.1 kHz)
2 Hz – 50 kHz (–3 dB)
S/N:
115 dB (Audible Range)
115 dB (Audible Range)
Dynamic Range:
100 dB (Audible Range)
105 dB (Audible Range)
Harmonic Distortion:
0.0020 % (1 kHz, Audible Range)
0.0010 % (1 kHz, Audible Range)
2.0 Vrms
2.0 Vrms
–21 – –15 dBm
–
0 Output Level
0 Digital output
Output level (optical):
Front panel
Rear panel
Remote control unit
98
Index
Contents
Connections
Playback
Settings
o Wireless LAN section
Network type (wireless LAN standard):
Security:
Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
Conforming to IEEE 802.11n
(Wi-Fi® compliant)z
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4 GHz
No. of channels:
1 – 13 ch
z The (Wi-Fi® CERTIFIED) Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
o General
Power supply voltage/frequency:
AC 230 V, 50/60 Hz
Power consumption:
18 W
Power consumption in standby mode:
0.4 W
Power consumption in “Network Control” – “On”
mode:
4.0 W
For the purpose of improvement, the specifications and design are subject to change without notice.
Front panel
Rear panel
Remote control unit
99
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Dimensions
50
166
297
48
Unit : mm
344
45
.
45
13
60
73
60
139
434
o Weight : 2.9 kg
Front panel
Rear panel
Remote control unit
100
Index
Contents
Connections
Index
Playback
Settings
vD
vA
Accessories ..................................................... 5
Add New Feature ........................................... 66
Add To Favorites ............................................ 37
AirPlay ............................................................ 44
App Store ....................................................... 92
Auto-Standby ................................................. 64
Cables ............................................................ 16
Charging the iPod .......................................... 41
Connecting an amplifier ................................. 17
Connecting an iPod ........................................ 19
Connecting a USB memory device ................ 19
Connecting a power cord ............................... 25
Connecting to a device with digital audio input
connectors ..................................................... 18
Connecting to a home network (LAN) ............ 21
Connecting to the IR control connector .......... 24
Appendix
vN
Display’s brightness ....................................... 58
NAS .......................................................... 32, 90
DLNA ............................................................. 92
Network Control ............................................. 68
Network Information ....................................... 68
vF
Favorites list ................................................... 36
vP
Firmware update ............................................ 65
Playing back an iPod ...................................... 38
Friendly Name ................................................ 69
Playing back files stored on PC ................ 32, 90
Front panel ....................................................... 9
Playing a USB memory device ....................... 42
vI
vC
Tips
vR
Inputting characters ........................................ 62
Random playback .............................. 34, 40, 43
Inserting the batteries ....................................... 6
Rear panel ...................................................... 10
Internet Radio ................................................. 28
Remote control unit ........................................ 12
iTunes ...................................................... 45, 96
Remote play function ..................................... 48
Repeat playback ................................ 34, 40, 43
vL
Listening to Internet Radio ............................. 29
vM
Menu map ...................................................... 59
Resetting factory settings ............................... 86
vS
Selecting the input source .............................. 27
Sleep timer ..................................................... 58
Spotify ............................................................ 47
Supported iPod/iPhone models ...................... 20
Front panel
Rear panel
Remote control unit
101
Index
Contents
Connections
Playback
Settings
vT
Turning the power on ..................................... 27
vU
Update on web screen ................................... 55
vV
vTuner ............................................................ 30
vW
Web control function ...................................... 51
Front panel
Rear panel
Remote control unit
102
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
License
This section describes software license used for this unit.
To maintain the correct content, the original (English) is used.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included in all copies
or substantial portions of the Software.
o Boost
http://www.boost.org/
Boost Software License – Version 1.0 – August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization obtaining
a copy of the software and accompanying documentation covered by this license
(the “Software”) to use, reproduce, display, distribute, execute, and transmit the
Software, and to prepare derivative works of the Software, and to permit third-parties
to whom the Software is furnished to do so, all subject to the following:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
The copyright notices in the Software and this entire statement, including the above
license grant, this restriction and the following disclaimer, must be included in all
copies of the Software, in whole or in part, and all derivative works of the Software,
unless such copies or derivative works are solely in the form of machine-executable
object code generated by a source language processor.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND
NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR
OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
o FastDelegate
http://www.codeproject.com/KB/cpp/FastDelegate.aspx
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS
CODE PROJECT OPEN LICENSE (“LICENSE”). THE WORK IS PROTECTED BY
COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK
OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS
PROHIBITED.
o Expat
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN, YOU
ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE
AUTHOR GRANTS YOU THE RIGHTS CONTAINED HEREIN IN CONSIDERATION
OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS. IF YOU DO NOT
AGREE TO ACCEPT AND BE BOUND BY THE TERMS OF THIS LICENSE, YOU
CANNOT MAKE ANY USE OF THE WORK.
http://www.jclark.com/xml/expat.html
Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center
Ltd
Front panel
Rear panel
Remote control unit
103
Index
Contents
Connections
Playback
Settings
Definitions. “Articles” means, collectively, all articles written by Author which
describes how the Source Code and Executable Files for the Work may be used by a
user.
“Author” means the individual or entity that offers the Work under the terms of this
License.
“Derivative Work” means a work based upon the Work or upon the Work and other
pre-existing works.
“Executable Files” refer to the executables, binary files, configuration and any
required data files included in the Work.
“Publisher” means the provider of the website, magazine, CD-ROM, DVD or other
medium from or by which the Work is obtained by You.
“Source Code” refers to the collection of source code and configuration files used to
create the Executable Files.
“Standard Version” refers to such a Work if it has not been modified, or has been
modified in accordance with the consent of the Author, such consent being in the full
discretion of the Author.
“Work” refers to the collection of files distributed by the Publisher, including the
Source Code, Executable Files, binaries, data files, documentation, whitepapers and
the Articles.
“You” is you, an individual or entity wishing to use the Work and exercise your rights
under this License.
Rear panel
Remote control unit
Appendix
You may otherwise modify Your copy of this Work (excluding the Articles) in any way
to create a Derivative Work, provided that You insert a prominent notice in each
changed file stating how, when and where You changed that file.
You may distribute the standard version of the Executable Files and Source Code or
Derivative Work in aggregate with other (possibly commercial) programs as part of a
larger (possibly commercial) software distribution.
The Articles discussing the Work published in any form by the author may not be
distributed or republished without the Author’s consent. The author retains copyright
to any such Articles. You may use the Executable Files and Source Code pursuant to
this License but you may not repost or republish or otherwise distribute or make
available the Articles, without the prior written consent of the Author.
Any subroutines or modules supplied by You and linked into the Source Code or
Executable Files this Work shall not be considered part of this Work and will not be
subject to the terms of this License.
Patent License. Subject to the terms and conditions of this License, each Author
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
irrevocable (except as stated in this section) patent license to make, have made, use,
import, and otherwise transfer the Work.
Restrictions. The license granted in Section 3 above is expressly made subject to
and limited by the following restrictions: You agree not to remove any of the original
copyright, patent, trademark, and attribution notices and associated disclaimers that
may appear in the Source Code or Executable Files.
You agree not to advertise or in any way imply that this Work is a product of Your
own.
The name of the Author may not be used to endorse or promote products derived
from the Work without the prior written consent of the Author.
You agree not to sell, lease, or rent any part of the Work. This does not restrict you
from including the Work or any part of the Work inside a larger software distribution
that itself is being sold. The Work by itself, though, cannot be sold, leased or rented.
Fair Use/Fair Use Rights. Nothing in this License is intended to reduce, limit, or
restrict any rights arising from fair use, fair dealing, first sale or other limitations on the
exclusive rights of the copyright owner under copyright law or other applicable laws.
License Grant. Subject to the terms and conditions of this License, the Author hereby
grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the
applicable copyright) license to exercise the rights in the Work as stated below: You
may use the standard version of the Source Code or Executable Files in Your own
applications.
You may apply bug fixes, portability fixes and other modifications obtained from the
Public Domain or from the Author. A Work modified in such a way shall still be
considered the standard version and will be subject to this License.
Front panel
Tips
104
Index
Contents
Connections
Playback
Settings
You may distribute the Executable Files and Source Code only under the terms of
this License, and You must include a copy of, or the Uniform Resource Identifier for,
this License with every copy of the Executable Files or Source Code You distribute
and ensure that anyone receiving such Executable Files and Source Code agrees
that the terms of this License apply to such Executable Files and/or Source Code.
You may not offer or impose any terms on the Work that alter or restrict the terms of
this License or the recipients’ exercise of the rights granted hereunder. You may not
sublicense the Work. You must keep intact all notices that refer to this License and to
the disclaimer of warranties. You may not distribute the Executable Files or Source
Code with any technological measures that control access or use of the Work in a
manner inconsistent with the terms of this License.
You agree not to use the Work for illegal, immoral or improper purposes, or on pages
containing illegal, immoral or improper material. The Work is subject to applicable
export laws. You agree to comply with all such laws and regulations that may apply to
the Work after Your receipt of the Work.
Rear panel
Remote control unit
Appendix
This License and the rights granted hereunder will terminate automatically upon any
breach by You of any term of this License. Individuals or entities who have received
Derivative Works from You under this License, however, will not have their licenses
terminated provided such individuals or entities remain in full compliance with those
licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any termination of this
License.
If You bring a copyright, trademark, patent or any other infringement claim against
any contributor over infringements You claim are made by the Work, your License
from such contributor to the Work ends automatically.
Subject to the above terms and conditions, this License is perpetual (for the duration
of the applicable copyright in the Work). Notwithstanding the above, the Author
reserves the right to release the Work under different license terms or to stop
distributing the Work at any time; provided, however that any such election will not
serve to withdraw this License (or any other license that has been, or is required to
be, granted under the terms of this License), and this License will continue in full
force and effect unless terminated as stated above.
Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”,
“WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME
ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT
INFRINGEMENT, SUITABILITY, ETC. AUTHOR EXPRESSLY DISCLAIMS ALL
EXPRESS, IMPLIED OR STATUTORY WARRANTIES OR CONDITIONS,
INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR ANY WARRANTY OF TITLE OR NONINFRINGEMENT, OR THAT THE WORK (OR ANY PORTION THEREOF) IS
CORRECT, USEFUL, BUG-FREE OR FREE OF VIRUSES. YOU MUST PASS THIS
DISCLAIMER ON WHENEVER YOU DISTRIBUTE THE WORK OR DERIVATIVE
WORKS.
Indemnity. You agree to defend, indemnify and hold harmless the Author and the
Publisher from and against any claims, suits, losses, damages, liabilities, costs, and
expenses (including reasonable legal or attorneys’ fees) resulting from or relating to
any use of the Work by You.
Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE
LAW, IN NO EVENT WILL THE AUTHOR OR THE PUBLISHER BE LIABLE TO YOU
ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL,
PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE
USE OF THE WORK OR OTHERWISE, EVEN IF THE AUTHOR OR THE
PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Termination.
Front panel
Tips
Publisher. The parties hereby confirm that the Publisher shall not, under any
circumstances, be responsible for and shall not have any liability in respect of the
subject matter of this License. The Publisher makes no warranty whatsoever in
connection with the Work and shall not be liable to You or any party on any legal
theory for any damages whatsoever, including without limitation any general, special,
incidental or consequential damages arising in connection to this license. The
Publisher reserves the right to cease making the Work available to You at any time
without notice
Miscellaneous
This License shall be governed by the laws of the location of the head office of the
Author or if the Author is an individual, the laws of location of the principal place of
residence of the Author.
If any provision of this License is invalid or unenforceable under applicable law, it
shall not affect the validity or enforceability of the remainder of the terms of this
License, and without further action by the parties to this License, such provision shall
be reformed to the minimum extent necessary to make such provision valid and
enforceable.
105
Index
Contents
Connections
Playback
Settings
http://www.xiph.org/vorbis/
Copyright (c) 2002-2004 Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o libogg
http://www.xiph.org/ogg/
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Rear panel
Remote control unit
Appendix
o libvorbis
No term or provision of this License shall be deemed waived and no breach
consented to unless such waiver or consent shall be in writing and signed by the
party to be charged with such waiver or consent.
This License constitutes the entire agreement between the parties with respect to the
Work licensed herein. There are no understandings, agreements or representations
with respect to the Work not specified herein. The Author shall not be bound by any
additional provisions that may appear in any communication from You. This License
may not be modified without the mutual written agreement of the Author and You
Front panel
Tips
o Tremolo
http://wss.co.uk/pinknoise/tremolo
Copyright (C) 2002 – 2009 Xiph.org Foundation Changes Copyright (C) 2009 – 2010
Robin Watts for Pinknoise Productions Ltd
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
106
Index
Contents
Connections
Playback
Settings
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o Mersenne Twister
http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/MT2002/CODES/mt19937ar.c
Copyright (C) 1997 – 2002, Makoto Matsumoto and Takuji Nishimura,
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
The names of its contributors may not be used to endorse or promote products
derived from this software without specific prior written permission.
o Tremor
http://wiki.xiph.org/index.php/Tremor
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
Rear panel
Remote control unit
Appendix
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Front panel
Tips
107
Index
Contents
Connections
Playback
Settings
http://curl.haxx.se
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 – 2011, Daniel Stenberg, <[email protected]>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or
without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
o zlib
http://www.zlib.net/
zlib.h -- interface of the “zlib” general purpose compression library version 1.2.3, July
18th, 2005
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
Copyright (C) 1995 – 2004 Jean-loup Gailly and Mark Adler
This software is provided “as-is”, without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
o c-ares
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
http://c-ares.haxx.se
Copyright 1998 by the Massachusetts Institute of Technology.
The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an acknowledgment
in the product documentation would be appreciated but is not required.
Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.
Permission to use, copy, modify, and distribute this software and its documentation
for any purpose and without fee is hereby granted, provided that the above copyright
notice appear in all copies and that both that copyright notice and this permission
notice appear in supporting documentation, and that the name of M.I.T. not be used
in advertising or publicity pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations about the suitability of this
software for any purpose. It is provided “as is” without express or implied warranty.
Jean-loup Gailly [email protected], Mark Adler [email protected]
Rear panel
Remote control unit
Appendix
o cURL
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Front panel
Tips
108
Index
Contents
Connections
Playback
Settings
o License information for the software used in
the unit
About GPL (GNU-General Public License), LGPL (GNU Lesser
General Public License) License
This product uses GPL/LGPL software and software made by other
companies.
After you purchase this product, you may procure, modify or distribute
the source code of the GPL/LGPL software that is used in the product.
Denon provides the source code based on the GPL and LPGL
licenses at the actual cost upon your request to our customer service
center.
However, note that we make no guarantees concerning the source
code.
Please also understand that we do not offer support for the contents of
the source code.
Front panel
Rear panel
Remote control unit
109
Index
Tips
Appendix
.
www.denon.com
110
D&M Holdings Inc.
3520 10363 00AD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement