LPC1788 OEM Board Datasheet

LPC1788 OEM Board Datasheet
Embedded Artists’
LPC1788 OEM Board DS rev D DS
The Art of Embedded Systems Development – made Easy™
Document status: Preliminary
LPC1788-32 OEM Board Feature Highlights
The LPC1788-32 OEM Board provides a quick and easy solution for
implementing a high-performance ARM Cortex-M3 based design around
the LPC1788 from NXP.
 Build around NXP's ARM Cortex-M3 LPC1788 microcontroller
with 512Kbyte internal FLASH and 96Kbyte internal SRAM
 32MByte external SDRAM, via 32-bit databus
 128 Mbyte NAND FLASH
 100/10Mbps Ethernet interface based on SMSC LAN8720
 12.000 MHz and 32.768 kHz crystals for LPC1788
 32Kbyte I2C E2PROM for storing non-volatile parameters
 Buffered 32-bit data bus
 +3.3V powering
 200 pos expansion connector
(as defined in popular SO-DIMM industry standard), 0.6mm pitch
 Compact design with dimensions: 68 x 55 mm
Support Highlights




Access to Embedded Artists support page containing
o Schematics
o User’s Manual
o Sample software applications
o OEM Board Integration Guide
Supported by Developer’s Kit, see picture to right
Volume discount available
Customization service available for optimized high-volume design
Block Diagram of LPC1788-32 OEM Board
12MHz
crystal
32-bit
SDRAM
LPC1788
Parallel
NAND
32.768kHz
crystal
EthernetPHY
I2CE2PROM
Buffers
ETH, USB, I2C, GPIO, Buffered memory bus, power, etc.
NXP Partner
Embedded Artists is a partner of NXP. Together we give engineers an excellent base to work
from when creating advanced embedded systems. We have a close co-operation and know
everything there is to know about the NXP processors. Take advantage of our unique knowledge!
For further information, please contact: [email protected]
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malmö
Sweden
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC1788 OEM Board DS rev D DS
The Art of Embedded Systems Development – made Easy™
Document status: Preliminary
Absolute Maximum Ratings
Parameter
Rating
VDD to GND (Supply voltage)
General for Digital/Analog Input/Output Voltage
+5V tolerant pins on LPC1788
Storage temperature
-0.5V to +3.6V
-0.5V to VDD+0.5V
-0.5V to +6.0V (see LPC1788 DS for details)
-40°C to 100°C
Stress above these limits may cause permanent damage to the board.
Technical Data
Parameter
Supply voltage (VDD to GND)
Ripple with frequency contents < 100kHz
Ripple with frequency contents ≥ 100kHz
Supply current
- idle, 32kHz RTC active
- low-power mode
- executing from internal flash (100MHz)
- executing from external sdram (100MHz)
- Ethernet+usb active
VBAT current
Operating temperature[1]
Relative Humidity (RH)
0°C < TA ≤ 50°C, non-condensing
50°C < TA ≤ 60°C, non-condensing
60°C < TA ≤ 70°C, non-condensing
[1]
[2]
Min
Typical
Max
3.10V
3.30V
3.50V
50mV
10mV
Max observed
TBD[2]
TBD[2]
TBD[2]
TBD[2]
TBD[2]
TBD[2]
-40 ºC
+85 ºC
5%
5%
5%
80%
50%
35%
Extended temperature range applied on LPC1788 OEM board rev D and later.
Will be defined after a characterization process.
Mechanical Dimensions
Board width according to SO-DIMM standard: 67.6 mm.
Board height and depth according to picture below:
2.0 mm
Top side components
5.0 mm
Bottom side components
2.0 mm
55.0 mm
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can
discharge without detection. Although this product features ESD protection damages may
occur on devices subjected to high energy ESD. Therefore, proper ESD precaution should be
taken to avoid performance degradation or loss of functionality.
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malmö
Sweden
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC1788 OEM Board DS rev D DS
The Art of Embedded Systems Development – made Easy™
Document status: Preliminary
Pin Information
SODIMM
pins
1
2
3
4
5
6
7
8
9
10
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
I/O, Application Details
Connected to
A, Ethernet TXP
A, Ethernet RXP
A, Ethernet TXN
A, Ethernet RXP
P, VDD3_3A
P, GND
OD, ETH-LED1
OD, ETH-LED2
P, VBAT-IN
O, RTC-ALARM
I, RESET-IN
O, RESET-OUT
NC
B, GPIO
O, TCK/SWDCLK
B, GPIO
I, TRST
B, TMS/SWDIO
I, TDI
O, TDO/SWO
P, V3A
P, VREF
P, VSSA
P, GND
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
P, VCC
P, GND
P, VCC
P, GND
A, USB1-DP
A, USB2-DP
A, USB1-DM
A, USB2-DM
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
Ethernet-PHY
Ethernet-PHY
Ethernet-PHY
Ethernet-PHY
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malmö
Sweden
Ethernet-PHY
Ethernet-PHY
LPC1788, vbat
LPC1788, rtc-alarm
LPC1788, rst-in
LPC1788, rst-out
LPC1788, P5.0
SPIFI
CS control
LPC1788,
tck/swdclk
LPC1788, P5.4
LPC1788, trst
LPC1788, tms/swdio
LPC1788, tdi
LPC1788, tdo/swo
LPC1788, v3a
LPC1788, vref
LPC1788, vssa
LPC1788, P2.0
LPC1788, P2.1
LPC1788, P2.2
LPC1788, P2.3
LPC1788, P2.4
LPC1788, P2.5
LPC1788, P2.6
LPC1788, P2.7
LPC1788, P2.8
LPC1788, P2.9
LPC1788, P2.10
LPC1788, P2.11
LPC1788, USB-D+1
LPC1788, USB-D+2
LPC1788, USB-D-1
LPC1788, USB-D-2
LPC1788, P2.12
LPC1788, P2.13
LPC1788, P0.0
LPC1788, P0.1
LPC1788, P0.2
LPC1788, P0.3
LPC1788, P0.4
LPC1788, P0.5
LPC1788, P0.6
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
SODIMM
pins
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
I/O, Application Details
P, GND
P, GND
NC
NC
NC
NC
B, GPIO
B, GPIO
B, GPIO
NC
B, GPIO
NC
O, Buffered CS1 (internal NAND)
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
NC
NC
NC
NC
P, GND
P, GND
O, Buffered Address bus 15
O, Buffered CS2
O, Buffered Address bus 14
O, Buffered CS0
O, Buffered Address bus 13
O, Buffered BLS3
O, Buffered Address bus 12
O, Buffered BLS2
O, Buffered Address bus 11
O, Buffered BLS1
O, Buffered Address bus 10
O, Buffered BLS0
O, Buffered Address bus 9
O, Buffered WE
O, Buffered Address bus 8
O, Buffered OE
O, Buffer Address bus 7
O, Buffer Address bus 23
O, Buffer Address bus 6
O, Buffer Address bus 22
O, Buffer Address bus 5
O, Buffer Address bus 21
O, Buffer Address bus 4
Connected to
LPC1788, P5.4
LPC1788, P5.3
LPC1788, P5.2
LPC1788, P1.16
LPC1788, P4.31 via buffer
LPC1788, P4.30
LPC1788, P1.16
LPC1788, P2.14
LPC1788, P2.15
LPC1788, P2.19
LPC1788, P2.21
LPC1788, P2.22
LPC1788, P2.23
LPC1788, P2.25
LPC1788, P2.26
LPC1788, P2.27
LPC1788, P4.15 via buffer
LPC1788, P2.14 via buffer
LPC1788, P4.14 via buffer
LPC1788, P4.30 via buffer
LPC1788, P4.13 via buffer
LPC1788, P4.29 via buffer
LPC1788, P4.12 via buffer
LPC1788, P4.28 via buffer
LPC1788, P4.11 via buffer
LPC1788, P4.27 via buffer
LPC1788, P4.10 via buffer
LPC1788, P4.26 via buffer
LPC1788, P4.9 via buffer
LPC1788, P4.25 via buffer
LPC1788, P4.8 via buffer
LPC1788, P4.24 via buffer
LPC1788, P4.7 via buffer
LPC1788, P4.23 via buffer
LPC1788, P4.6 via buffer
LPC1788, P4.22 via buffer
LPC1788, P4.5 via buffer
LPC1788, P4.21 via buffer
LPC1788, P4.4 via buffer
© Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC1788 OEM Board DS rev D DS
The Art of Embedded Systems Development – made Easy™
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, I2C-SDA
B, I2C-SCL
P, GND
P, GND
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
B, GPIO
OD, NandFlashRdy
LPC1788, P0.7
LPC1788, P0.8
LPC1788, P0.9
LPC1788, P0.10
LPC1788, P0.11
LPC1788, P0.12
LPC1788, P0.13
LPC1788, P0.14
LPC1788, P0.15
LPC1788, P0.16
LPC1788, P0.17
LPC1788, P0.18
LPC1788, P0.19
LPC1788, P0.20
LPC1788, P0.21
LPC1788, P0.22
LPC1788, P0.23
LPC1788, P0.24
LPC1788, P0.25
LPC1788, P0.26
LPC1788, P0.27
LPC1788, P0.28
LPC1788, P1.2
LPC1788, P1.3
LPC1788, P1.5
LPC1788, P1.6
LPC1788, P1.7
LPC1788, P1.11
LPC1788, P1.12
LPC1788, P1.13
LPC1788, P1.18
LPC1788, P1.19
LPC1788, P1.20
LPC1788, P1.21
LPC1788, P1.22
LPC1788, P1.23
LPC1788, P1.24
LPC1788, P1.25
LPC1788, P1.26
LPC1788, P1.27
LPC1788, P1.28
LPC1788, P1.29
LPC1788, P1.30
LPC1788, P1.31
Internal NAND flash
I/O legend
O: output
I: input
B: Bidirectional
P: Power
A: Analog
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malmö
Sweden
Document status: Preliminary
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
O, Buffer Address bus 20
O, Buffer Address bus 3
O, Buffer Address bus 19
O, Buffer Address bus 2
O, Buffer Address bus 18
O, Buffer Address bus 1
O, Buffer Address bus 17
O, Buffer Address bus 0
O, Buffer Address bus 16
O, Buffered CS3
I, ABUF_EN
P, Buffer-VCC
P, GND
B, Buffer Data bus 15
B, Buffer Data bus 31
B, Buffer Data bus 14
B, Buffer Data bus 30
B, Buffer Data bus 13
B, Buffer Data bus 29
B, Buffer Data bus 12
B, Buffer Data bus 28
B, Buffer Data bus 11
B, Buffer Data bus 27
B, Buffer Data bus 10
B, Buffer Data bus 26
B, Buffer Data bus 9
B, Buffer Data bus 25
B, Buffer Data bus 8
B, Buffer Data bus 24
B, Buffer Data bus 7
B, Buffer Data bus 23
B, Buffer Data bus 6
B, Buffer Data bus 22
B, Buffer Data bus 5
B, Buffer Data bus 21
B, Buffer Data bus 4
B, Buffer Data bus 20
B, Buffer Data bus 3
B, Buffer Data bus 19
B, Buffer Data bus 2
B, Buffer Data bus 18
B, Buffer Data bus 1
B, Buffer Data bus 17
B, Buffer Data bus 0
B, Buffer Data bus 16
P, Buffer-VCC
P, GND
LPC1788, P4.20 via buffer
LPC1788, P4.3 via buffer
LPC1788, P4.19 via buffer
LPC1788, P4.2 via buffer
LPC1788, P4.18 via buffer
LPC1788, P4.1 via buffer
LPC1788, P4.17 via buffer
LPC1788, P4.0 via buffer
LPC1788, P4.16 via buffer
LPC1788, P2.15 via buffer
Connected to GND on board
LPC1788, P3.15 via buffer
LPC1788, P3.31 via buffer
LPC1788, P3.14 via buffer
LPC1788, P3.30 via buffer
LPC1788, P3.13 via buffer
LPC1788, P3.29 via buffer
LPC1788, P3.12 via buffer
LPC1788, P3.28 via buffer
LPC1788, P3.11 via buffer
LPC1788, P3.27 via buffer
LPC1788, P3.10 via buffer
LPC1788, P3.26 via buffer
LPC1788, P3.9 via buffer
LPC1788, P3.25 via buffer
LPC1788, P3.8 via buffer
LPC1788, P3.24 via buffer
LPC1788, P3.7 via buffer
LPC1788, P3.23 via buffer
LPC1788, P3.6 via buffer
LPC1788, P3.22 via buffer
LPC1788, P3.5 via buffer
LPC1788, P3.21 via buffer
LPC1788, P3.4 via buffer
LPC1788, P3.20 via buffer
LPC1788, P3.3 via buffer
LPC1788, P3.19 via buffer
LPC1788, P3.2 via buffer
LPC1788, P3.18 via buffer
LPC1788, P3.1 via buffer
LPC1788, P3.17 via buffer
LPC1788, P3.0 via buffer
LPC1788, P3.16 via buffer
OD: Open-drain output
GPIO: General purpose I/O
GPI: General purpose input
GPO: General purpose output
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Embedded Artists’
LPC1788 OEM Board DS rev D DS
The Art of Embedded Systems Development – made Easy™
Document status: Preliminary
Disclaimers
Embedded Artists reserves the right to make changes to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
Customer is responsible for the design and operation of their applications and products using Embedded Artists’ products,
and Embedded Artists accepts no liability for any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Embedded Artists’ product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks associated with their applications and products.
Embedded Artists does not accept any liability related to any default, damage, costs or problem which is based on any
weakness or default in the customer’s applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using
Embedded Artists’ products in order to avoid a default of the applications and the products or of the application or use by
customer’s third party customer(s). Embedded Artists does not accept any liability in this respect.
Embedded Artists does not accept any liability for erratas on individual components.
All Embedded Artists’ products are sold pursuant to Embedded Artists’ terms and conditions of sale:
http://www.embeddedartists.com/sites/default/files/docs/General_Terms_and_Conditions.pdf
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If
any part of this document refers to any third party products or services it shall not be deemed a license grant by Embedded
Artists for the use of such third party products or services, or any intellectual property contained therein or considered as a
warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property
contained therein.
UNLESS OTHERWISE SET FORTH IN EMBEDDED ARTISTS’ TERMS AND CONDITIONS OF SALE EMBEDDED
ARTISTS DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF
EMBEDDED ARTISTS PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF
ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY THE CEO OF EMBEDDED ARTISTS, PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, NUCLEAR, LIFE
SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR
MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL
DAMAGE.
Resale of Embedded Artists’ products with provisions different from the statements and/or technical features set forth in this
document shall immediately void any warranty granted by Embedded Artists for the Embedded Artists’ product or service
described herein and shall not create or extend in any manner whatsoever, any liability of Embedded Artists.
This document as well as the item(s) described herein may be subject to export control regulations. Export might require a
prior authorization from national authorities.
Definition of Document Status
Preliminary – The document is a draft version only. The content is still under internal review and subject to formal approval,
which may result in modifications or additions. Embedded Artists does not give any representations or warranties as to the
accuracy or completeness of information included herein and shall have no liability for the consequences of use of such
information. The document is in this state until the product has passed Embedded Artists product qualification tests.
Approved – The information and data provided define the specification of the product as agreed between Embedded Artists
and its customer, unless Embedded Artists and customer have explicitly agreed otherwise in writing.
Embedded Artists AB
Davidshallsgatan 16
SE-211 45 Malmö
Sweden
Phone/Fax: +46 (0)40-611 00 93
E-mail: [email protected]
http://www.embeddedartists.com
© Copyright 2011 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are
trademarks of their respective holders and should be treated as such.
Privacy policy: http://www.embeddedartists.com/privacy.php
Legal: http://www.embeddedartists.com/legal.php
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement