In-Cabinet Modular I/O
In-Cabinet Modular I/O
In-cabinet (IP20) modular I/O is a cost-efficient networking solution that is used in an enclosure and designed to replace terminal
blocks with intelligent I/O. Providing flexible communication capabilities, TURCK in-cabinet modular I/O allows operators to mix
and match I/O interfaces and adapters, including digital inputs, digital outputs, analog I/O and RFID. For enhanced performance,
in-cabinet modular I/O offers significant space savings with up to 32 I/O on a single card. Modules are ideal for applications with
large quantities of I/O, including packaging, conveying and general manufacturing.
BL20 System
The BL20 system is an IP20 Modular I/O system designed for remotely collecting I/O signals. In
comparison to costly and time-consuming historic approaches that brought I/O signals back to
a single large cabinet, BL20 uses multiple small cabinets placed near the I/O that they control—
providing a flexible, modular solution that saves time and money.
Providing enhanced communication flexibility, the BL20 seamlessly mixes and matches I/O types,
communication networks, connection technologies and package styles to meet any project needs.
Standard BL20 System
• Programmable features for
local or distributed control
• Mix and match slices to create
the ideal mix of I/O
• System expands to integrate up to
72 slices to meet diverse requirements
• Screw and tension (spring)
clamp wiring bases available
Economy BL20 System
• Multiprotocol gateway with interface
to the higher level control system
• Low-cost gateways provide increased
value when connecting to open networks
• Integrated Ethernet switch allows a line
topology between multiple gateways
without use of an external switch
• Accommodate up to 32 I/O modules
• Designed to work with all
TURCK Economy I/O slices, as
well as standard BL20 slices
• Economy gateway or slice requires
tension (spring) clamp base
B1 B3027
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
ProductsPAGE
BL20 Mechanical Characteristics
B3
Part Number Key
B3
BL20 Gateways
B5
BL20 Digital Slices
B7
BL20 Analog and Specialty Slices
B11
BL20 Bases
B15
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B2
IN-CABINET MODULAR I/O
System
voltage
Field voltage
Field voltage
BL20 Mechanical Overview
•
•
•
•
•
•
•
•
•
Operating Temperature: 0 to +55°C (32 to 131°F)*
Protection: IP20
Vibration: EN 61131
Relative Humidity: 5 to 95%, Level RH-2, no condensation
Shock Test: IEC 68-2-27
Drop and Topple: IEC 68-2-31 and free full IEC 68-2-32
Electro-magnetic Compatibility: EN 50 082-2
Housing Material - Lexan (PC-V0)
Approvals - CE, UL, CSA, Class 1 Div 2
BL20 Gateways Part Number Key
BL 20 - E - GW - EN -
Subnet Type
Modular IO System
JA=DeviceNet™ Master
Environment
Ethernet Type
20=In-Cabinet IP20 System
Economy
(blank)=Standard Gateway (Screw or Tension Clamp, up to 72 slices)
E=Economy Gateway (Tension Clamp Only, up to 32 slices)
Gateway Type
GW=Standard Gateway
GWBR=Standard Gateway
(DeviceNet™ and CANOPEN only)
PG=Programmable Gateway
B3 B3027
Network
(Blank)=Modbus® TCP (standard gateway)
Multiprotocol: EtherNet/IP™, Modbus TCP, PROFINET® (economy gateway)
IP=EtherNet/IP™
PN=PROFINET®
MB = Modbus RTU
EN=Ethernet
DPV1=PROFIBUS® DPV1
DNET=DeviceNet™
CANOPEN = CANopen
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
DISTRIBUTED I/O SALES GUIDE
BL20 Slices Part Number Key
BL 20 - E - 16 DO - 24VDC - 0.5A - P
Discrete I/O Secondary Descriptor
Modular IO System
P=PNP, positive switching
N=NPN, negative switching
NO=Normally Open Relays
NC=Normally Closed Relays
CO=1 Normally Open, 1 Normally Closed relay
NAMUR=NAMUR Digital Inputs
Environment
20=In-Cabinet IP20 System
Economy Modules
(Blank)=Standard
E=Economy Module
I/O Descriptor
Number of I/O
1=1 Channel
2=2 Channel
4=4 Channel
8=8 Channel
16=16 Channel
32=32 Channel
Type of I/O
DI=Digital Inputs
DO=Digital Outputs
AI=Analog Inputs
AIH=Hart Analog Inputs
AO=Analog Outputs
AOH=Hart Analog Outputs
RFID=Radio Frequency Identification
SWIRE=SWIRE Master for Motor Starters
CNT=High Speed Counter
SSI=SSI Encoder Interface
RS232=RS232 Serial
RS485-422 = RS485 or RS422 Serial
PF=Power Feed
BR=Bus Refreshing
In-Cabinet Modular
Output Descriptors
0.5A=500mA outputs
2A=2A outputs
R=Relay Outputs
Analog Descriptors
I(0/4…20mA) = Current
U(-10/0…+10VDC) = Voltage
U/I=Voltage or Current
PT/NI-2/3 = 2 or 3 wire RTD
THERMO-PI = Thermocouple
U/I-4PT/NI = Voltage, Current or RTD
TC=Thermo Couple
RFID Descriptors
A = Acyclic (PD ident function required)
S = Simple
Operating Voltage Rating
(blank) = 24 Volts - Direct Current
24VDC = 24 Volts - Direct Current
120/230VAC = 120 or 230 Volts - Alternating Current
BL20 Bases Part Number Key
BL 20 - S
6
T - S.. Unique Identifier
Modular IO System
B=Power Base that only feeds power to the right
CJ=Cold Junction - For use with Thermocouple slice
Environment
20=In-Cabinet IP20 System
Type of Terminal (see note for available combinations)
Type of Module
S=Signal Terminal
B=Power/Signal Terminal
C=C-Rail Terminal
S=Single Module
B=Block Module
P=Power Module
Connection Technology
Number of Terminal Rows
T=Tension Clamp
S= Screw Terminal
3=3 Rows
4=4 Rows
6=6 Rows
Note: Available combinations:
SBB=Signal, Power, Power
SBBC=Signal, Power, Power, C-Rail Term.
SBBS=Signal, Power, Power, Signal
SBBSBB=Signal, Power, Power, Signal, Power, Power
SBC=Signal, Power, C-Rail Term.
SBCS=Signal, Power, C-Rail Term., Signal
SBCSBC=Signal, Power, C-Rail Term., Signal, Power, C-Rail Term.
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B4
IN-CABINET MODULAR I/O
BL20 Gateways
•
•
•
•
•
•
•
•
•
IP20 Protection
Suitable for In-Cabinet Applications
Some Versions Programmable via CoDeSys V2.3
IEC 61131-3 Programming Structure
Program in Ladder Logic, Structured Text, or 3 others
Mix and Match Languages to Suit Application
Large Library of Pre-written Function Blocks
Provide Interface between Chosen Network(s) and BL20 I/O
Up to 72 BL20 Slices can be used with Standard Gateways, 32
with Economy
• Wide Variety of Digital and Analog I/O Available
• Specialty Slices Available inc. RFID, RSXXX, PWM Outputs, and
Encoder Inputs
Housing Style
Part Number
BL20-E-GW-EN
BL20-E-GW-EN-PN
BL20-E-GW-DP
BL20-E-GW-DN
2.676 [68.0]
REF
4.604 [117.0]
REF
BL20-E-GW-RS-MB/ET
BL20-E-GW-EC
BL20-GW-EN-IP
BL20-GW-EN
Standard
1.319 [33.5]
REF
Non-programmable gateways
5.076 [128.9]
REF
Economy
BL20-E-GW-CO
BL20-GW-EN-PN
BL20-GW-DPV1
BL20-GWBR-DNET
1.988 [50.5]
REF
2.654 [67.4]
REF
Programmable
gateways
BL20-GWBR-CANOPEN
BL20-PG-EN-IP
BL20-PG-EN
BL20-PG-EN-DN-JA
x standard feature
+ Via CoDeSys FB
o Optional
B5 B3027
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
DISTRIBUTED I/O SALES GUIDE
Physical Characteristics
PCCC
MB
RTU
+
+
+
CO
MB
TCP
ECAT
MB
RTU
x
Master Functions
CO
x
DN
x
CE, UL
DP
PN
CE, UL, FM
MB
TCP/
IP
Approvals
EIP
Slave Functions
x
o
x
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
CE
x
CE, UL
x
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
CE, FM
x
CE, UL, FM
x
CE, UL, FM
x
+
+
+
CE, UL, FM
x
+
+
+
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B6
In-Cabinet Modular
Operating Temp 0°C to 55°C
LED Indication for Quick Diagnostic
Rotary Switches for ID Settings
Clear Window
DN
•
•
•
•
IN-CABINET MODULAR I/O
BL20 Digital I/O Slices
Part Number
Inputs
Housing Style
.496 [12.6]
REF
B7 B3027
2.181 [55.4]
REF
Outputs
3.040 [77.2]
REF
BL20-2DI-24VDC-P
2
BL20-2DI-24VDC-N
2
BL20-4DI-24VDC-P
4
BL20-4DI-24VDC-N
4
BL20-4DI-NAMUR
4
BL20-16DI-24VDC-P
16
BL20-32DI-24VDC-P
32
BL20-2DI-120/230VAC-P
2
Number of Outputs
IP20 Protection
Tension Clamp and Screw Connection Technology
All I/O Short-circuit Protected
Standard Slices Include Separated Electronics and Wiring Base
Economy Slices Include Integrated Electronics and Wiring Base
PNP and NPN Options
High Density Economy Slices Create a Small Footprint for Total
System
• Powerful 0.5A and 2A Output Drivers Available
Number of Inputs
•
•
•
•
•
•
•
BL20-2DO-24VDC-0.5A-P
2
BL20-2DO-24VDC-0.5A-N
2
BL20-2DO-24VDC-2A-P
2
BL20-4DO-24VDC-0.5A-P
4
BL20-16DO-24VDC-0.5A-P
16
BL20-32DO-24VDC-0.5A-P
32
BL20-2DO-R-CO
2
BL20-2DO-R-NC
2
BL20-2DO-R-NO
2
BL20-2DO-120/230VAC-0.5A
2
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
CE, UL, FM
x
PNP
CE, UL, FM
PNP
CE, UL, FM
AC
CE, UL
BL20-S4*-SBBC
x
x
x
0.5A
CE, UL, FM
x
x
NPN
0.5A
CE, UL, FM
x
x
PNP
2A
CE, UL, FM
x
x
PNP
0.5A
CE, UL, FM
PNP
0.5A
CE, UL, FM
PNP
0.5A
CE, UL, FM
Integrated
PNP
Type of I/O
BL20-S4*-SBCS
BL20-S3*-SBB
x
BL20-S3*-SBC
Approvals
CE, UL, FM
x
x
x
x
x
CE, UL, FM
x
Relay
CE, UL, FM
x
x
Relay
CE, UL, FM
x
x
0.5A
x
x
Relay
AC
BL20-B6*-SBCSBC
NAMUR
NPN
BL20-B3*-SBC
x
x
BL20-S6*-SBCSBC
x
x
x
BL20-B6*-SBBSBB
x
CE, UL, FM
CE, UL, FM
BL20-B4*-SBBC
CE, UL, FM
PNP
BL20-B3*-SBB
BL20-S6*-SBBSBB
PNP
NPN
Power of Outputs
BL20-S4*-SBBS
Base Module
CE, UL
x
x
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B8
IN-CABINET MODULAR I/O
BL20 Digital I/O Slices
Part Number
Inputs
Housing Style
BL20-E-8DI-24VDC-P
Number of
Outputs
IP20 Protection
Tension Clamp and Screw Connection Technology
All I/O Short-circuit Protected
Standard Slices Include Separated Electronics and Wiring Base
Economy Slices Include Integrated Electronics and Wiring Base
PNP and NPN Options
High Density Economy Slices Create a Small Footprint for Total
System
• Powerful 0.5A and 2A Output Drivers Available
Number of Inputs
•
•
•
•
•
•
•
8
BL20-E-8DO-24VDC-0.5A-P
8
Outputs
5.075 [128.9]
REF
2.685 [68.2]
REF
Inputs
.496 [12.6]
REF
BL20-E-16DI-24VDC-P
16
BL20-E-16DO-24VDC-0.5A-P
16
Outputs
5.075 [128.9]
REF
.496 [12.6]
REF
B9 B3027
2.685 [68.2]
REF
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
PNP
PNP
0.5A
PNP
PNP
0.5A
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
BL20-B6*-SBCSBC
BL20-B3*-SBC
BL20-S6*-SBCSBC
BL20-S4*-SBCS
BL20-S3*-SBC
BL20-B6*-SBBSBB
BL20-B4*-SBBC
BL20-B3*-SBB
Integrated
BL20-S6*-SBBSBB
BL20-S4*-SBBS
BL20-S4*-SBBC
BL20-S3*-SBB
Approvals
Power of Outputs
Type of I/O
Base Modules
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B10
IN-CABINET MODULAR I/O
BL20 Analog & Specialty I/O
Housing Style
Part Number
Inputs
3.040 [77.2]
REF
2.181 [55.4]
REF
* PG gateway is recommended
** Use only with PG gateway
B11 B3027
Outputs
.496 [12.6]
REF
BL20-1AI-I(0/4...20mA)
1
BL20-1AI-U(-10/0...+10VDC)
1
BL20-1CNT
1
BL20-1SSI
1
BL20-1RS232*
1
BL20-1RS485/422*
1
BL20-PF-24VDC-D
1
BL20-PF-120/230VAC-D
1
BL20-BR-24VDC-D
1
BL20-2AI-I(0/4...20mA)
2
BL20-2AI-U(-10/0...+10VDC)
2
BL20-2AIH-I
2
BL20-2AI-THERMO-PI
2
BL20-2AI-PT/NI-2/3
2
BL20-2RFID-S
2
BL20-2RFID-A**
2
BL20-4AI-U/I
4
Number of Outputs
IP20 Protection
RFID Options
Types of Communication: RS232, RS422, RS485
Specialty Motor Starter (up to 16 Direct-on-line starter)
High Speed Counter for Encoders
SSI Communication for Position Elements (encoder or linear)
Power Feed Modules to Ensure Proper Supply
Bus Refreshing Modules to Ensure Proper Communication
Number of Inputs
•
•
•
•
•
•
•
•
BL20-1AO-I(0/4...20mA)
1
BL20-2AO-I(0/4...20mA
2
BL20-2AO-U(-10/0...+10VDC)
2
BL20-2AOH-I
2
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
x
Approvals
BL20-P3*-SBB-B
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
CE, UL, FM
x
x
x
x
x
x
CE, UL, FM
x
x
CE, UL
x
x
CE, UL, FM
x
x
CE, UL, FM
x
x
CE, UL, FM
x
CE, UL, FM
x
x
x
x
Integrated
BL20-S6*-SBCSBC
CE, UL
x
x
BL20-P4*-SBBC
x
x
x
x
BL20-S4*-SBBS-CJ
x
x
x
x
BL20-S4*-SBBS
BL20-P3*-SBB
In-Cabinet Modular
x
BL20-S3*-SBB
Bus Refreshing
Power Feed
Motor Starter
RS485/RS422
RS232
SSI
Counter/PWM
Counter
RFID
0/4-20 mA (HART)
-10/0-10 V Output
0/4-20 Output
RTD Input
Thermocouple
0/4-20 mA Input (HART)
-10/0-10 V Input
0/4-20 mA Input
DISTRIBUTED I/O SALES GUIDE
x
CE, UL, FM
x
CE, UL, FM
x
x
CE, UL, FM
x
x
CE, UL, FM
x
x
CE, UL, FM
x
x
CE, UL
x
x
CE, UL, FM
x
x
x
CE, UL, FM
x
CE, UL, FM
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B12
IN-CABINET MODULAR I/O
BL20 Analog & Specialty I/O
Part Number
Inputs
Housing Style
BL20-E-8AI-U/I-4PT/NI
8
BL20-E-4AI-TC
4
BL20-E-1SWIRE
1
BL20-E-4AO-U/I
Number of Outputs
IP20 Protection
RFID Options
Types of Communication: RS232, RS422, RS485
Specialty Motor Starter (up to 16 Direct-on-line starter)
High Speed Counter for Encoders
SSI Communication for Position Elements (encoder or linear)
Power Feed Modules to Ensure Proper Supply
Bus Refreshing Modules to Ensure Proper Communication
Number of Inputs
•
•
•
•
•
•
•
•
4
.496 [12.6]
REF
2.685 [68.2]
REF
Outputs
5.075 [128.9]
REF
BL20-E-2CNT-2PWM*
2
2
.496 [12.6]
REF
B13 B3027
2.685 [68.2]
REF
Inputs & Outputs
6.299 [160.0]
REF
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
-10/0-10 V Input
x
x
x
x
x
x
x
x
x
CE, UL, FM
x
CE
x
UL
x
CE, UL, FM
x
UL
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B14
In-Cabinet Modular
Approvals
BL20-P3*-SBB-B
Integrated
BL20-S6*-SBCSBC
BL20-P4*-SBBC
BL20-S4*-SBBS-CJ
BL20-S4*-SBBS
BL20-P3*-SBB
BL20-S3*-SBB
Bus Refreshing
Power Feed
Motor Starter
RS485/RS422
RS232
SSI
Counter/PWM
Counter
RFID
0/4-20 mA (HART)
-10/0-10 V Output
0/4-20 Output
RTD Input
Thermocouple
0/4-20 mA Input (HART)
0/4-20 mA Input
DISTRIBUTED I/O SALES GUIDE
IN-CABINET MODULAR I/O
BL20 Wiring Bases
Housing Style
BL20 Wiring Bases
BL20-S3S-SBB
BL20-S3S-SBC
BL20-S3T-SBB
BL20-S3T-SBC
BL20-P3S-SBB
BL20-P3S-SBB-B
4.630 [117.6]
REF
BL20-P3T-SBB
BL20-P3T-SBB-B
.496 [12.6]
REF
1.717 [43.6]
REF
BL20-S4S-SBBC
BL20-S4S-SBBS
BL20-S4S-SBBS-CJ
BL20-S4S-SBCS
BL20-S4T-SBBC
BL20-S4T-SBBS
5.075 [128.9]
REF
BL20-S4T-SBBS-CJ
BL20-S4T-SBCS
BL20-P4S-SBBC
BL20-P4S-SBBC-B
BL20-P4T-SBBC
BL20-P4T-SBBC-B
.496 [12.6]
REF
1.717 [43.6]
REF
BL20-S6S-SBBSBB
BL20-S6S-SBCSBC
BL20-S6T-SBBSBB
BL20-S6T-SBCSBC
6.083 [154.5]
REF
.496 [12.6]
REF
B15 B3027
1.717 [43.6]
REF
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
DISTRIBUTED I/O SALES GUIDE
Housing Style
BL20 Wiring Bases
BL20-B3S-SBB
BL20-B3S-SBC
BL20-B3T-SBB
In-Cabinet Modular
BL20-B3T-SBC
4.630 [117.6]
REF
3.969 [100.8]
REF
1.717 [43.6]
REF
BL20-B4S-SBBC
BL20-B4T-SBBC
5.075 [128.9]
REF
3.969 [100.8]
REF
1.717 [43.6]
REF
BL20-B6S-SBBSBB
BL20-B6S-SBCSBC
BL20-B6T-SBBSBB
BL20-B6T-SBCSBC
6.083 [154.5]
REF
3.969 [100.8]
REF
1.717 [43.6]
REF
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B16
IN-CABINET MODULAR I/O
excom® Remote I/O System
The excom® remote I/O system is ideal for use in hazardous or non-hazardous locations. The system provides bus-compatible,
decentralized input and output connection modules with a protection rating of IP20 for connection of binary and analog
intrinsically safe field devices. Explosion protection enables use in zones 1 and 2.
excom System
The excom system is available in four mounting configurations for application flexibility:
• Standard MT18, when used with segment coupler, mounts in zone 1
(Class 1, Division 2) areas with up to 16 intrinsically safe I/O module
connections to field devices in zone 0 (Class 1, Division 1) areas
• MT24, when used with segment coupler, mounts in zone 2 (Class 1, Division 2) areas with up to
24 intrinsically safe I/O module connections to field devices in zone 0 (Class 1, Division 1) areas
• MT24 mounts in non-hazardous areas with up to 24 intrinsically safe I/O
module connections to field devices in zone 0 (Class 1, Division 1) areas
• MT24 mounts in non-hazardous areas with up to 24 non-intrinsically safe
I/O module connections to field devices in non-hazardous areas
excom Features
• Redundant power supplies and gateways
• Intrinsically safe connection to
PROFIBUS-DP with V1 functionality
• Online programming and
configuration of all parameters
• Consistent HART parameterization
from the process control
system to the field device
• Exchange and extension of all
components during operation
B17 B3027
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
PRODUCTS
PAGE
Typical System Layout
B17
Zone 1, excom - Remote I/O for Class I Div 2 Installation
B21
Zone 2, excom - Remote I/O for Hazardous Class I Div 2 Areas
B25
excom - Remote I/O for Non-Ex Areas with Ex hardware
B29
excom - Remote I/O for Non-Ex Areas with Non-Ex hardware
B33
excom - Accessories for Ex and Non-Ex Areas
B37
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B18
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
IN-CABINET MODULAR I/O

DCS
Asset
Management
Ethernet
System and line redundancy possible
 
PROFIBUS-DP
RS485
   
Non Ex Area
Sensor, NAMUR
NAMUR
R1
R2
Mechanical contact with
resistor circuitry
Mechanical contact
Pulse (external on/off
control)
Zone 2
Current source
Voltage source
?
I
mV
Actuator
Low voltage, millivolt
signals
Thermocouple
RTD
é
Potentiometer
Zone 1
Relay-Changeover
Zone 0
B19 B3027
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
DISTRIBUTED I/O SALES GUIDE
3
2
1 0 9
4 5 6
1 0 9
7
8
RS485-IS (a)
7
8
RS485-IS (a)
Shield
RS485-IS (b)
RS485-IS (b)
Shield
Shield
Shield
Shield
PS1
24 VDC
PS1
24 VDC
Baud rate
SC12Ex
3
2
Baud rate
OC11Ex/3G.2
RS485
3
2
RS485
OC11Ex/3G.2
4 5 6
1 0 9
4 5 6
1 0 9
7
8
RS485-IS (a)
7
8
RS485-IS (a)
Shield
Shield
Coupler
SC12Ex
PS2
24 VDC
PS2
24 VDC
Shield
Shield
Shield
RS485-IS (b)
RS485-IS (b)
In-Cabinet Modular
4 5 6
alternative
3
2
RS485
Shield
Optocoupler
Baud rate
SC12Ex
Baud rate
RS485
SC12Ex
PS2
24 VDC
PS2
24 VDC
Shield
Coupler
Fiber
optics
PROFIBUS-DP
RS485 IS
Optocoupler
Optocoupler
OC11Ex/2G.2
PROFIBUS-DP
RS485 IS
OC11Ex/2G.2
alternative
PS1
24 VDC
PS1
24 VDC
OC11Ex/3G.2
OC11Ex/3G.2
Fiber
optics
Optocoupler
OC11Ex/2G.2
OC11Ex/2G.2
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B20
IN-CABINET MODULAR I/O
Zone 1, excom® - Remote I/O for Class I Div 2 Installation*
• Up to 16 Intrinsically Safe I/O Module Connections to 128 Field Devices in
Zone 0 (Class 1, Division 1) Areas
Module Rack
Housing Style
Part number
MT18-R024
MT18-C024
MT18-C230
10.236 [260.0]
REF
9.252 [235.0]
* Requires use of SC12EX segment coupler
16.220 [412.0]
Ø.276 [Ø7.0]
4x
17.323 [440.0]
REF
5.059 [128.5]
REF
I/O Cards
Housing Style
Part Number
Number of Channels
Input Cards
4.646 [118.0]
REF
DI401EX
4-channel discrete
AI401EX
4-channel analog
AI41EX
4-channel analog
AI43EX
4-channel analog
AIH40EX
4-channel analog
AIH41EX
4-channel analog
TI40EX
4-channel temperature
Output Cards
.709 [18.0]
REF
4.173 [106.0]
REF
DO40EX
4-channel discrete
DO401EX
4-channel discrete
AO40EX
4-channel analog
Input/Output Cards
B21 B3027
DM80EX
8-channel
DF20EX
2-channel frequency
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Number of I/O modules
Connection type
Power supply
16
Screw terminals
DC
16
Spring terminals
DC
16
Spring terminals
AC
Input/Output Type
Ambient Temp. (°C)
Approvals
NAMUR or dry contact
-20…+70
PTB 10 ATEX 2024
active/passive
-20…+60
FM (US/Canada)
passive
-20…+60
potentiometer
-20…+60
active/passive HART
-20…+60
FM (US/Canada)
passive HART
-20…+60
FM (US/Canada)
RTD, TC
-20…+70
FM (US/Canada)
IS actuators
-20…+60
FM (US/Canada), PTB 01 ATEX 2047
IS actuators
-20…+70
FM (US/Canada), PTB 10 ATEX 2024, CE
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
Approvals
FM (US/Canada)
FM (US/Canada)
NAMUR or dry contact
-20…+70
FM (US/Canada), PTB 00 ATEX 2178
NAMUR or dry contact
-20…+60
FM (US/Canada), PTB 00 ATEX 2178
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B22
IN-CABINET MODULAR I/O
Zone 1, excom® - Remote I/O for Class I Div 2 Installation
• In Order to Assemble a System, the Following are Required:
1xMT18
1xPSD24EX
1xGDP-IS
1xSC12EX
Gateway Card
Housing Style
Part Number
GDP-IS/FW2.1
Fieldbus
PROFIBUS®-DP
4.646 [118.0]
REF
.709 [18.0]
REF
4.173 [106.0]
REF
Power Supply
Housing Style
Part number
Power supply type
PSD24EX
24VDC
PPSA115EX
115VAC
6.102 [155.0]
5.709 [145.0]
Ø.197 [Ø5.0]
4x
B23 B3027
.984 [25.0]
4.173 [106.0]
1.772 [45.0]
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Transfer Rate
9.6kBit/s…1.5MBit/s
Ambient Temperature (°C)
-20…+70
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
Approvals
PTB 09 ATEX 2013, CE, FM (US/Canada)
Approvals
FM (US/Canada)
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B24
IN-CABINET MODULAR I/O
Zone 2, excom® - Remote I/O for Hazardous Class I Div 2 Areas*
• Up to 24 Intrinsically Safe I/O Module Connections to 192 Field Devices in
Zone 0 (Class 1, Division 1) Areas
Module Rack
Housing Style
Part number
MT16-3G
MT24-3G
10.236 [260.0]
REF
9.252 [235.0]
Ø.276 [Ø7.0]
4x
* Requires use of SC12EX segment coupler
L1
5.059 [128.5]
REF
L2
MT16:
MT24:
L1=352 mm
L1=498 mm
L2=380 mm
L2=526 mm
I/O Cards
Housing Style
Part Number
Number of Channels
Input Cards
4.646 [118.0]
REF
DI401EX
4-channel discrete
AI401EX
4-channel analog
AI41EX
4-channel analog
AI43EX
4-channel analog
AIH40EX
4-channel analog
AIH41EX
4-channel analog
TI40EX
4-channel temperature
Output Cards
DO40EX
4-channel discrete
DO401EX
4-channel discrete
AO40EX
4-channel analog
Input/Output Cards
.709 [18.0]
REF
B25 B3027
4.173 [106.0]
REF
DM80EX
8-channel
DF20EX
2-channel frequency
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
DISTRIBUTED I/O SALES GUIDE
Connection type
Power supply
16
Screw terminals
DC
24
Screw terminals
DC
Input/Output Type
Ambient Temp. (°C)
Approvals
NAMUR or dry contact
-20…+70
PTB 10 ATEX 2024
active/passive
-20…+60
FM (US/Canada)
passive
-20…+60
potentiometer
-20…+60
active/passive HART
-20…+60
FM (US/Canada)
passive HART
-20…+60
FM (US/Canada)
RTD, TC
-20…+70
FM (US/Canada)
IS actuators
-20…+60
FM (US/Canada), PTB 01 ATEX 2047
IS actuators
-20…+70
FM (US/Canada), PTB 10 ATEX 2024, CE
In-Cabinet Modular
Number of I/O modules
FM (US/Canada)
NAMUR or dry contact
-20…+70
FM (US/Canada), PTB 00 ATEX 2178
NAMUR or dry contact
-20…+60
FM (US/Canada), PTB 00 ATEX 2178
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B26
IN-CABINET MODULAR I/O
Zone 2, excom®- Remote I/O for Class I Div 2 Installation
• In Order to Assemble a System, the Following are Required:
1xMT16-3G or MT24-3G
1xPSM24-3G
1xGDP-IS
1xSC12EX
Gateway Card
Housing Style
Part Number
GDP-IS/FW2.1
Fieldbus
PROFIBUS®-DP
4.646 [118.0]
REF
.709 [18.0]
REF
4.173 [106.0]
REF
Power Supply Card
Housing Style
Part number
PSM24-3G
Power supply type
24VDC
4.646 [118.0]
REF
.709 [18.0]
REF
B27 B3027
4.173 [106.0]
REF
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Transfer Rate
9.6kBit/s…1.5MBit/s
Ambient Temperature (°C)
-20…+70
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
Approvals
PTB 09 ATEX 2013, CE, FM (US/Canada)
Approvals
FM*
* Pending
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B28
IN-CABINET MODULAR I/O
excom® - Remote I/O for Non-Ex Areas with Ex hardware
• Up to 24 Intrinsically Safe I/O Module Connections to 192 Field Devices in
Zone 0(Class 1, Div. 1) Areas
Module Rack
Housing Style
Part number
MT16-G3G
MT24-3G
10.236 [260.0]
REF
9.252 [235.0]
Ø.276 [Ø7.0]
4x
L1
MT16:
Does not require SC12EX segment coupler
L2
5.059 [128.5]
REF
MT24:
L1=352 mm
L1=498 mm
L2=380 mm
L2=526 mm
I/O Cards
Housing Style
Part Number
Number of Channels
Input Cards
4.646 [118.0]
REF
DI401EX
4-channel discrete
AI401EX
4-channel analog
AI41EX
4-channel analog
AI43EX
4-channel analog
AIH40EX
4-channel analog
AIH41EX
4-channel analog
TI40EX
4-channel temperature
Output Cards
.709 [18.0]
REF
B29 B3027
4.173 [106.0]
REF
DO40EX
4-channel discrete
DO401EX
4-channel discrete
AO40EX
4-channel analog
Input/Output Cards
DM80EX
8-channel
DF20EX
2-channel frequency
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Number of I/O modules
Connection type
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
Power supply
16
Screw terminals
DC
24
Screw terminals
DC
Input/Output Type
Ambient Temp. (°C)
Approvals
NAMUR or dry contact
-20…+70
PTB 10 ATEX 2024
active/passive
-20…+60
FM (US/Canada)
passive
-20…+60
potentiometer
-20…+60
active/passive HART
-20…+60
FM (US/Canada)
passive HART
-20…+60
FM (US/Canada)
RTD, TC
-20…+70
FM (US/Canada)
IS actuators
-20…+60
FM (US/Canada), PTB 01 ATEX 2047
IS actuators
-20…+70
FM (US/Canada), PTB 10 ATEX 2024, CE
FM (US/Canada)
NAMUR or dry contact
-20…+70
FM (US/Canada), PTB 00 ATEX 2178
NAMUR or dry contact
-20…+60
FM (US/Canada), PTB 00 ATEX 2178
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B30
IN-CABINET MODULAR I/O
excom®- Remote I/O for Non-Ex Areas with Ex hardware
• In Order to Assemble a System, the Following are Required:
1xMT16-3G or MT24-3G
1xPSM24-3G
1xGDP-NI
Gateway Card
Housing Style
Part Number
Fieldbus
GDP-NI/FW…
PROFIBUS®-DP
Part number
Power supply type
4.646 [118.0]
REF
.709 [18.0]
REF
4.173 [106.0]
REF
Power Supply Card
Housing Style
PSM24-3G
24VDC
4.646 [118.0]
REF
.709 [18.0]
REF
B31 B3027
4.173 [106.0]
REF
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Transfer Rate
9.6kBit/s…1.5MBit/s
Ambient Temperature (°C)
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
Approvals
-20…+70
Approvals
FM*
* Pending
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B32
IN-CABINET MODULAR I/O
excom® - Remote I/O for Non-Ex Areas with Non-Ex hardware
• Up to 24 Non-Intrinsically Safe I/O Module Connections to 192 Field Devices in Non-Hazardous Areas
Module Rack
Housing Style
Part number
MT24-N
10.236 [260.0]
REF
9.252 [235.0]
19.606 [498.0]
Ø.276 [Ø7.0]
4x
20.709 [526.0]
REF
5.059 [128.5]
REF
*Screw terminals ordered separately
I/O Cards
Housing Style
Part Number
Number of Channels
Input Cards
4.646 [118.0]
REF
AI40-N
4-channel analog
AIH41-N
4-channel analog
AI43-N
4-channel analog
AIH40-N
4-channel analog
AIH41-N
4-channel analog
TI40N
4-channel temperature
Output Cards
.709 [18.0]
REF
B33 B3027
4.173 [106.0]
REF
DO40-N
4-channel discrete
AO40-N Cards
4-channel analog
DO60R-N
6-channel mechanical
Input/Output Cards
DM80-N
8-channel
DF20-N
2-channel frequency
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Number of I/O modules
24
Connection type
Power supply
Screw terminals
Input/Output Type
Ambient Temperature
(°C)
active/passive
-20…+60
passive
-20…+60
potentiometer
-20…+60
active/passive HART
-20…+60
passive HART
-20…+60
RTD, TC
-20…+70
IS actuators
-20…+70
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
DC
Approvals
SPST Relay contacts
NAMUR or dry contact
-20…+70
NAMUR or dry contact
-20…+60
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B34
IN-CABINET MODULAR I/O
excom® - Remote I/O for Non-Ex Areas with Non-Ex hardware
• In Order to Assemble a System, the Following are Required:
1xMT24-N
1xPSM24-N
1xGDP-N
Gateway Card
Housing Style
Part Number
GDP-N/FW…
Fieldbus
PROFIBUS®-DP
4.646 [118.0]
REF
.709 [18.0]
REF
4.173 [106.0]
REF
Power Supply Card
Housing Style
Part number
PSM24-N
Power supply type
24VDC
4.646 [118.0]
REF
.709 [18.0]
REF
B35 B3027
4.173 [106.0]
REF
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Transfer Rate
Ambient Temperature (°C)
9.6kBit/s…1.5MBit/s
-20…+70
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
Approvals
Approvals
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B36
IN-CABINET MODULAR I/O
excom® - Accessories for Ex and Non-Ex Areas
• Segment Coupler Allows Mounting in Zone 1 or 2
Housing Style
Part Number Description/Notes
SC12-EX
PROFIBUS®-DP to
RS485IS interface
4.150 [105.4]
REF
1.004 [25.5]
REF
5.591 [142.0]
REF
Housing Style
2.126 [54.0] REF
A1 B1 A2 B2
Part Number
Description
D9T-RS485IS
Connector for excom MT (backplane) and SC12-EX RS485-IS
Connector
D9T-RS485
Connector for SC12-EX PROFIBUS-DP and PB-XEPI2 Connector
1.456 [37.0]
REF.
.618 [15.7]
REF
Preconfigured cable part number: D9T-RS485IS D9T-RS485IS 451B-*M
2.126 [54.0] REF
A1 B1 A2 B2
1.456 [37.0]
REF.
.618 [15.7]
REF
Preconfigured cable part number: D9S/T D9S D9S/T 455-*M-*M
* denotes length in meters
B37 B3027
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
DISTRIBUTED I/O SALES GUIDE
Ambient Temperature (°C)
Approvals
62 (31 with redundancy)
-20…+70
FM (US)
In-Cabinet Modular
Number of Nodes
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
B3027 B38
IN-CABINET MODULAR I/O
excom® - Accessories for Ex and Non-Ex Areas
• FDT-DTM Parameterization Via PACTWARE
Housing Style
Part Number
Description
Supply Voltage
PB-XEPI2
EtherNet to PROFIBUS®
interface
24VDC (19.2…28.8VDC)
3.898 [99.0]
4.213 [107.0]
REF
.890 [22.6]
Housing Style
.631 [16.0]
REF
Part Number
Description
.437 [11.1]
REF
STB16-4RS/1,5-BU
4-pin terminal block, screw terminals,
blue (set of 16)
.437 [11.1]
REF
STB16-4RS/1,5-BK
4-pin terminal block, screw terminals,
black (set of 16)
.350 [8.9]
REF
.631 [16.0]
REF
.350 [8.9]
REF
B39 B3027
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Current Consumption Ambient Temperature (°C)
Operating Systems
≤200 mA
Windows XP/7
0…+50
www.turck.us • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
In-Cabinet Modular
DISTRIBUTED I/O SALES GUIDE
B3027 B40
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement