Catalogue Sheet: CX4000BIL & CS4000BIL Series

Catalogue Sheet: CX4000BIL & CS4000BIL Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
Supply and install the Ready-Lite® CX4000BIL & CS4000BIL Series LED Exit Sign. The equipment shall operate
with universal AC input voltage of 120/277/347VAC at less than 1.5W and universal two-wire DC input voltage
from 6VDC to 24VDC at less than 2.5W for single and double face signs. The Exit Sign shall consist of a
two-piece white extruded aluminum combined body/faceplate with a maximum depth of 1 1/4”. The exit shall
also include extruded aluminum end caps with white gaskets in order to provide protection to the internal
components and eliminate any possible light leaks. The exit fixture shall be either single or double-faced as
shown on the drawings. The faceplate shall be of a stencil design and will have 6” high letters with a 3/4”
stroke indicating both EXIT and SORTIE side by side. The canopy shall fasten to the exit body for ease of
installation in either ceiling or wall mount. The fixture shall contain a light source, which shall be LED with a
long life and shall consist of separate AC and DC LED sources in the case of AC/DC-remote equipment. Red
LED technology shall be ALINGAP.
The Exit Sign in a Self-powered configuration shall be equipped with a Nickel-Cadmium battery and shall stay
illuminated during emergency operation for at least two hours upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No.141
The equipment shall be Ready-Lite®Model:
.
CX4000BIL &
CS4000BIL SERIES
Bilingual Extruded
Aluminum Sign
FEATURES
• Thin profile, 2-piece extruded
aluminum housing
• Pre-specified mounting
• Universal, field-selectable chevrons
(knockout)
• Energy efficient – consumes less than
7W in AC or DC mode
• Normal AC and emergency DC
operation 120, 277 or 347V AC input;
6 to 24V DC input
• Available in single or double face
• Custom wording available on request
• Indirect refractive technology provides
bright, even illumination
• Long-life ALINGAP technology,
energy-efficient LED light source
• CSA certified, meets or exceeds
CSA 22.2 No. 141 requirements
WIRE GUARDS
460.0059-RL
wall mount
460.0092-RL
ceiling mount
DIMENSIONS
Dimensions are approximate and subject to change.
5-5/8” [14.2 cm]
5-5/8” [14.2 cm]
8-7/8” [22.5 cm]
9-5/8” [24.3 cm]
4-7/8” [12.5 cm]
1-3/8” [3.4 cm]
30-3/8” [77.1 cm]
30-3/8” [77.1 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/DC standard
120/347VAC
less than 2W
6 to 48VDC
less than 3W
AC/ special DC
120/277/347VAC
less than 2W
36 or 48 or 120VDC
less than 6W
120VAC/DC two wires
120VAC
less than 6W
120VDC
less than 6W
self-powered
120 or 347VAC
less than 7W
nickel-cadmium battery
Min. 2 hours
ORDERING INFORMATION
SERIES
CX4= exit sortie
CS4= sortie exit
FACES/MOUNTING
000= single face,
wall mount
100= single face,
ceiling mount
200= double face,
ceiling mount
APPROVAL
BIL
COLOUR
WH= polar white
BK= black
TA= textured aluminum
BA= brushed aluminum
VOLTAGE
-UL= 120/277/347VAC, 6 to 24VDC
-LU36= 120/277/347VAC-36VDC
-LU48= 120/277/347/VAC-48VDC
-LU120= 120/277/347/VAC-120VDC
-ISP= self-powered, 120VAC
-ISP3= self-powered, 347VAC
-L120-2W= 120VAC-120VDC-2 wires
OPTIONS
TP= tamper-proof screws*
*990.0119-RL= T
amper-proof bit
(sold separately)
E X A M P L E : C X 4 0 0 0 B I LTA - U L
30
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement