d6411 100

d6411 100
Model 6411
Back Probe Pin
FEATURES:
Make connections to terminals inside connectors up to
1” (24,39mm) deep.
Pin can be bent to fit into tight spaces
Banana Jack fits modular test leads, such as Pomona
models 5907A, 5908A and 5909A
Bright yellow color is easy to find in poor light
MATERIALS:
Jack: Brass
Tip Insulation: Polypropylene, Yellow
Tip: Nickel Plated Beryllium Copper
Boot Insulation: Vinyl, Yellow
RATINGS:
For CE compliance: not intended for hand-held use at voltages above 33Vrms / 70Vdc.
Current: 3 Amperes Max.
ORDERING INFORMATION:
Model 6411 (10 per package)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected])
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1094958
Page 1 of 2
Model 6411
Back Probe Pin
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected])
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1094958
Page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement