- No category
advertisement
Digital Betacam Family 2005/2006
www.sonybiz.net/digitalbetacam
2
Product line-up
Camcorder
DVW-970P
OPTIONAL ACCESSORIES
■ p. 4
■ p. 5
Studio Recorders
DVW-M2000P
DVW-2000P
OPTIONAL ACCESSORIES
■ p. 6
■ p. 6
■ p. 7
Compact Players
J-30 AND J-30/SDI
■ p. 8
SPECIFICATIONS
■ p. 9
Discover the quality and simplicity of Digital Betacam.
Digital Betacam was the first recording format to bring the benefits of digital production to the wider programme making community. Since its introduction, Digital Betacam has become the established favourite for standard definition programme production where only the ultimate picture quality and sound will suffice.
The high quality performance of Digital Betacam, combined with its simplicity of operation is just one reason why many broadcasters around the world have chosen Digital Betacam as their “in-house” production format. Recognising the continued popularity of Digital Betacam around the world,
Sony has added a new third generation camcorder to the
Digital Betacam line-up.
With a comprehensive range of models and built-in capability to replay Betacam, Betacam SP, Betacam SX and MPEG IMX cassettes, Digital Betacam is the ideal format to fully integrate your existing operations into a digital environment.
3
Camcorder
DVW-970P
4
The DVW-970P is the latest addition to the
Digital Betacam line-up. This third generation camcorder combines Power HAD
™
EX
CCD performance with high precision
14 bit A/D conversion to deliver reduced noise and smear and excellent sensitivity.
Progressive recording at 25 frames per second has been added, and features such as slow shutter mode, interval recording and picture cache operation are also provided. Use of the latest technology has reduced size, power consumption and acoustic noise compared with previous generation Digital Betacam camcorders.
FEATURES
■
3-chip 2/3-inch Power HAD EX ™ CCDs
■
Digital Betacam picture quality
■
Switchable between 50i and 25P, and 4:3 and 16:9 modes
■
Long recording time of up to 40 minutes on a single cassette
■
14 bit A/D conversion
■
High sensitivity of F11 at 2000 lux
■
Low smear level of –145dB (typical)
■
Excellent signal-to-noise ratio of 63dB
■
Turbo gain up to +48dB
■
TruEye ™ processing for improved reproduction of natural colours
■
Slow shutter mode for shooting in extremely low-light conditions
■
Selectable gamma table including film-like gamma
■
Auto Trace White (ATW) system
■
Triple skin tone detail control
■
Multi-matrix feature
■
Dial in colour temperature
■
Dual optical filters
■
Picture cache for capturing the (up to)
8 seconds of material before the record button is pressed (CBK-MB01 option required)
■
SDI output (CBK-SD01 option required)
■
4 channels of 20 bit digital audio
■
Stereo audio output
■
Slot for WRR-855 series wireless microphone receiver
■
Memory Stick slot for storage and recall of set-up parameters
■
Remote control using optional RM-B150 or
RM-B750 controllers
■
Battery remaining display in viewfinder
■
Rugged and ergonomic design
■
Essence Mark recording for rapid cue up during editing
■
UMID (Unique Material Identifier) recording for picture cataloguing and searching
Sony Services
Optional Accessories
CBK-SD01
SDI Output Board
CBK-MB01
Picture Cache Board
BKW-401
Viewfinder Rotation bracket
RM-B150
Remote Control Unit
RM-B750
Remote Control Unit
AC-DN10
AC Adapter
AC-DN2B
AC Adapter
BP-GL65/GL95
Lithium Ion Battery
Pack
BC-L70
Battery Charger
BC-M150
Battery Charger
VCT-14
Tripod Adapter
System configuration
ECM-678
(option)
BKW-401
(option)
MSH-32/64/128
(option)
VCT-14
Battery
Chargers
BC-L70 (for BP-GL95/
GL65/L60S)
BC-M150
(for BP-GL95/GL65/L60S)
BCT-D6/D12/
D22/D32/D40
Digital Betacam
Cassettes
MSH-32/64/128
Memory Stick media
WRR-855B
Wireless Microphone
Receiver
(Shown here with a BTA-801
Camera adapter for rear
Mounting to camcorder)
Internal light system
(option)
WRR-855B
(option)
WRR-862B
Dual Diversity
Microphone Receiver
(Adaptor required)
WLL-CA50
Wireless Camera
Transmitter
SDI
Output
Monitor
CBK-SD01
SDI Output Board (option)
CBK-MB01
Picture Cache Board (option)
Viewfinder
BP-GL95 / GL65
BP-L60S
BVF-V20W/V20WCE
(supplied; 2-inch B/ W viewfinder)
Video
Cassettes
BCT-D6/D12/
D22/D32/D40
AC-DN2B or
AC-DN10
8-pin
BNC
RM-B150 or
Monitor
Wireless
WLL-CA50
RM-B750
WLL-RX55
WLL-RX55
Wireless Camera
Receiver
ECM-670/672/678
Shotgun-type Electret
Condenser Microphones
Not pictured here:
1-547-341-12 Fog-proof Filter
A-8262-537-A Viewfinder Eye-piece (high magnification)
A-8262-538-A Viewfinder Eye-piece (low magnification)
A-8267-737-A Viewfinder Eye-piece (standard magnification with special compensation for aberrations)
A-8314-798-A Viewfinder Eye-Piece (high performance, x3)
X-3608-271-1 Standard Viewfinder Lens
A-8278-057-A Mounting Bracket for WRR-862B
LC-DN7 Hard Carrying Case
5
Studio Recorders
DVW-M2000P DVW-2000P
6
Records:
Replays:
Records:
Replays:
The DVW-M2000P is a Digital Betacam editing VTR with Betacam, Betacam SP, Betacam SX and MPEG IMX playback. It combines superb picture quality with excellent multi-generation editing capability. The
DVW-M2000P records 4 channels of digital audio at
20-bit resolution and has powerful editing features such as Pre-read, Dynamic Tracking (DT) and insert/assemble editing to zero frame accuracy. Recording and playback of UMID (Unique Material Identifier) is also a standard feature, for productions where the rapid identification and access to material is required. Many broadcasters use Digital Betacam VTRs today for playout of content from Flexicart and Library Management
(LMS) systems. The DVW M2000P is ideal for this application, where the requirement for rugged, reliable
24 hour-per-day operation is mandatory.
The DVW-2000P offers the same features as the
DVW-M2000P but without Betacam, Betacam SP,
Betacam SX and MPEG IMX playback.
DVW-M2000P
■
4:2:2 component digital VTR
■
625/50 operation
■ Digital Betacam recording and playback
■
Playback of Betacam, Betacam SP, Betacam SX and MPEG IMX cassettes
■
4 channels of 20-bit 48 kHz digital audio
■
Superb multi-generation editing capability
■ ±0 frame accurate assemble and insert editing
■
Pre-read editing capability
■
Broadcast quality variable speed playback from
-1 to +3 times (-1 to +2 times with Betacam SX)
■
Long record and playback time: 124 minutes using an L cassette and 40 minutes using an
S cassette
■ Composite and component analogue and SDI inputs and outputs as standard
■
4 analogue and AES/EBU audio inputs and outputs
■
UMID reader/writer as standard
■
Memory Stick slot for storing operational set up menus
DVW-M2000 + DVW-2000
525/60 Digital Betacam recorders are also available with CE marking for the Europe, Africa and Middle
East market.
Please contact your Sony Sales Centre for details.
DVW-2000P
■
4:2:2 component digital VTR
■
625/50 operation
■ Digital Betacam recording and playback
■
4 channels of 20-bit 48 kHz digital audio
■
Superb multi-generation editing capability
■
±0 frame accurate assemble and insert editing
■ Pre-read editing capability
■
Broadcast quality variable speed playback from
-1 to +3 times
■
Long record and playback time: 124 minutes using an L cassette and 40 minutes using an
S cassette
■
Composite and component analogue and SDI inputs and outputs as standard
■ 4 analogue and AES/EBU audio inputs and outputs
■
UMID reader/writer as standard
■
Memory Stick slot for storing operational set up menus
Optional Accessories
BKDW-101
Control Panel
The BKDW-101 provides additional control of the
DVW-M2000P and DVW-2000P from a remote location.
It is used with the BKMW-102 Control Panel Case and the BKMW-103 Control Panel Extension Kit. A switch on the front of the recorder allows control to be selected between the remote control panel and the control panel supplied with the recorder. The BKMW-102 and
BKMW-103 can also be used to extend the supplied front panel of the recorder. BKMW-103 includes a blanking panel which can be fixed to the front of the recorder in place of the original control panel.
BKMW-104
HD Up-Converter Board
For installation into DVW-M2000P and DVW-2000P Digital
Betacam VTRs. Converts 625/50 Betacam, Betacam SP,
Betacam SX, MPEG IMX and Digital Betacam material to High Definition 1080/50i, and outputs from the
DVW-M2000P via HD-SDI. Converts 625/50 Digital
Betacam material to High Definition 1080/50i, and outputs from the DVW-2000P via HD-SDI.
BKMW-103
Control Panel Extension Kit
(Cable length: 10 m)
RMM-131
Rack Mount Kit
Tapes
BCT-D34L/D64L/D94L/D124L
Digital Video Cassettes (Large Cassette)
BCT-D6/D12/D22/D32/D40
Digital Video Cassettes (Small Cassette)
BKMW-102
Control Panel Case
BCT-HD12CL
Cleaning Cassette
(not pictured here)
7
Compact Players
8
The J-30 and J-30/SDI are the smallest players of Betacam family cassettes.
The design concept of the J-Series was for affordable, compact office viewers to be used by producers, journalists and production staff. The J-30 and J-30/SDI can replay Betacam, Betacam SP,
Betacam SX, MPEG IMX and Digital
Betacam S-cassettes and L-cassettes.
They also have all the features required for viewing and logging, and – although not designed for linear editing applications or on-air use – are ideal for source feeding to servers or non-linear editing systems. The
J-30 provides composite and component analogue video outputs, while the
J-30/SDI has composite analogue and
SDI outputs. Both models have an i.LINK
interface for feeding material to DV-based editing applications, and are supplied with an infra-red remote controller. The J-30 and J-30/SDI also have a jog/shuttle dial,
525/625 versatility, simple remote control via RS-422A and audio meters – all packed into their compact size.
J-30
J-30/SDI
■
Extremely compact: 307 x 100 x 397 mm
(12 1 ⁄
8 x 4 x 15 1 ⁄
2 inches) in size and just
8 kg in weight
■ i.LINK interface (25 Mb/s DV output, and remote control input via 6-pin IEEE-1394)
■ Playback of Betacam, Betacam SP,
Betacam SX, MPEG IMX and Digital
Betacam cassettes
■
Playback of S-cassettes and L-cassettes
■
Jog/Shuttle dial with x20 maximum search speed for Digital Betacam cassettes
■
Infra-red remote controller
■ 525/625 switchable for international operation
■
Monitor output of 2 audio channels
(selectable on front panel)
■
Audio meters for display of the selected
2 channels of audio
■
Industry-standard RS-422A control interface for remote feeding into servers and nonlinear editors
J-30 only
■ Composite analogue and component analogue video outputs
J-30/SDI only
■
Composite analogue and 2 SDI outputs
(one with superimposed characters)
■ Timecode output via BNC connector
■ Built-in UMID (Unique Material Identifier) reader
■ 4 channels of digital output via SDI (8 channels when replaying MPEG IMX cassettes )
Camcorders
Specifications
GENERAL
Power requirements
Power consumption
Operating temperature
Storage temperature
Operating humidity
Mass
Continuous operating time
SIGNAL INPUTS/OUTPUTS
Genlock video input
Audio input (CH-1/2)
Microphone input
Time code input
Analog composite output
SDI output
Video test output
Audio output (CH-1/2)
Time code output
Earphone output
DVW-970P
DC 12 V +5.0 V/-1.0 V
29 W (with DC 12 V power supply, REC mode, with viewfinder)
0 to +40 °C (+32 to +104 °F)
-20 to +60 °C (-4 to +140 °F)
25 to 85% (relative humidity)
Approx. 3.7 kg (8 lb 3 oz)
Approx. 5.4 kg (11 lb 14 oz) (with viewfinder, microphone,
BP-GL95 battery, BCT-D40 tape)
Approx. 170 min. with BP-GL95 battery at 25 °C (77 °F),
REC mode
OTHER INPUTS/OUTPUTS
Lens
VF
Remote
Wireless microphone
Light
DC input
DC output
Battery terminal
Camcorder adaptor
VTR SECTION
GENERAL
Recording format Video
Audio
Tape speed
Record/Playback time
Fast forward time
Rewind time
Recommended Recording Media
Sampling frequency
Quantization
DIGITAL VIDEO PERFORMANCE
K-factor (2T pulse)
Y/C delay
Less than 1 %
Less than 15 ns
DIGITAL AUDIO PERFORMANCE
Frequency response
Dynamic range
Distortion
(at 1 kHz, emphasis ON, reference level)
Cross talk
(at 1 kHz, reference level)
Wow & flutter
Head room
20 Hz to 20 kHz, +0.5 dB/-0.8 dB
More than 85 dB (emphasis ON)
Less than 0.08 %
Less than –70 dB
Below measurable limit
20 dB (ex-factory setting)
* The specifications given above were measured via CBK-SD01 SDI Output Bord.
CAMERA SECTION
Pickup device
Aspect ratio
Total picture elements (H x V)
Effective picture elements (H x V)
Optical system
Spectral system
Built-in filters
Dimensions
Units: mm (inches)
DVW-970P
3-chip 2/3-inch type Power HAD EX CCD
16:9/4:3 switchable
1038 x 1188
980 x 1164
VIEWFINDER
CRT
Controls
Horizontal resolution
Microphone
F1.4 prism (with quarts filter)
1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND, A: CROSS,
B: 3200K, C: 4300K, D: 6300K
2/3-inch type Sony bayonet mount
BNC type (1), 1.0 Vp-p, 75 Ω
XLR-3-31 type (2), -60/-50/-40/+4 dBu* selectable, high impedance, balanced
XLR-3-31 type (1), -60/-50/-40 dBu*
BNC type (1), 0.5 to 18 Vp-p, 10 k Ω
BNC type (1), 1.0 Vp-p, 75 Ω
BNC type (1), 0.8 Vp-p, 75 Ω
(an optional CBK-SD01 is required)
BNC type (1), 1.0 Vp-p, 75
Ω
XLR-5-pin, male (stereo)
BNC type (1), 1.0 Vp-p, 75 Ω
Mini-jack (2)
* 0 dBu=0.775 Vrms.
Digital Betacam
4 ch/20 bits/48 kHz
96.7 mm/s
Max. 40 min. with BCT-D40 cassette
Approx. 6 min. with BCT-D40 cassette
Approx. 5 min. with BCT-D40 cassette
Sony Digital Betacam S cassette,
BCT-D6/D12/D22/D32/D40 Series
Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz
10-bit / sample
Lens mount
Electrical characteristics
Scan format
A/D conversion
Sensitivity
Minimum illumination
Smear level
Video S/N ratio
Vertical resolution
Shutter speed
12-pin
20-pin
8-pin
D-Sub 15-pin
2-pin, DC 12 V, max. 50 W
XLR-4-pin, male, DC 11 to 17 V
4-pin (for wireless microphone receiver), DC 12 V (max. 0.1 A)
5-pin
40-pin
ECS
Slow shutter
Gain selection
Registration
Warm-up time
Modulation depth at 5 MHz
SUPPLIED ACCESSORIES
625/50i, 625/25p
14 bits
F11 (typical) (2000 lx, 89.9% reflectance)
0.008 lx (F1.4 lens, +48 dB gain, with slow shutter mode at 16-frame accumulation)
-145 dB (typical)
63 dB (typical)
480 TV lines (with EVS) and
530 TV lines (without EVS) at 625/50i mode
575 TV lines at
625/25p mode
1/60, 1/125, 1/250, 1/500, 1/1000,
1/2000 s at 625/50i mode
1/33, 1/50, 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000 s at
625/25p mode
50 to 6000 Hz at 625/50i mode
25 to 6000 Hz at 625/25p mode
1/25, 1/12.5, 1/8.3, 1/6.3, 1/5,
1/4.2, 1/3.6, 1/3.1, 1/1.6 s
(1 to 8, 16 frames)
-3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, 48 dB (for GAIN LOW, GAIN MID,
GAIN HIGH and GAIN TURBO positions)
0.05% (all zones, without lens)
2 s
70% (16:9 typical)/55% (4:3 typical)
2.0-inch monochrome
BRIGHT, CONTRAST, PEAKING, TALLY, ZEBRA, DISPLAY switches
450 TV lines (16:9)/600 TV lines (4:3)
Electret condenser microphone (Ultra-directional) (Detachable)
Operation Manual (x1), Viewfinder (x1), Lens cap (x1), Shoulder belt (x1), Monaural Microphone (x1).
9
Studio Recorders
Specifications
GENERAL
Power requirements
Power consumption
Operating temperature
Storage temperature
Humidity
Mass
Dimensions (W x H x D)
Tape speed
Playback time
Fast forward/rewind time
Search speed range
DVW-M2000P DVW-2000P
AC 100 V to 240 V, 50/60 Hz
220 W
+5 °C to +40 °C (+41 °F to +104 °F)
200 W
-20 °C to +60 °C (-4 °F to +140 °F)
20 % to 90 % (relative humidity)
23.5 kg (52 lb 11 oz)
427 x 174 x 544 mm (16 7 ⁄
8 x 6 7 ⁄
8 x 21 1 ⁄
2 inches)
Digital BETACAM: 96.7 mm/s
MPEG IMX: 53.776 mm/s
BETACAM SX: 59.575 mm/s
BETACAM/BETACAM SP:
101.51 mm/s
—
—
—
Max. 124 min with BCT-D124L cassette
Approx. 3 min with BCT-D124L cassette
Digital BETACAM: ±50 times normal playback speed
MPEG IMX: ±78 times normal playback speed
—
BETACAM SX: ±78 times normal playback speed
BETACAM/BETACAM SP:
±42 times normal playback speed
—
—
0.7 s or less (from standby on)
6 s or less
HD-SDI output (option)
Analogue audio input
Analogue audio output
Cue audio input
Cue audio output
DVW-M2000P DVW-2000P
BNC (x3)
XLR (x4) (4CH)
XLR (x4) (4CH)
XLR (x1)
XLR (x1, only Digital Betacam playback)
Digital audio input BNC (x2), 4 channels, AES/EBU, default 48 kHz (32 to 48 kHz with Sample Rate converter), Complies with AES-3id-1995
Digital audio output
Remote
BNC (x4), 8 channels,
AES/EBU, 48 kHz fixed,
BNC (x2), 4 channels, AES/EBU,
48 kHz fixed, Complies with
Complies with AES-3id-1995 AES-3id-1995
Remote (RS-422A) D-sub 9-pin (x2), Sony 9-pin remote interface control RS-232C (ISR*)
Parallel Remote
D-sub 9-pin (x1), RS-232C interface
D-sub 50-pin (x1)
Video control
Control Panel
Time code input
Time code output
Memory card insertion slot
Monitor output L/R
Phones
D-sub 15-pin (x1)
Circular connector 10-pin
XLR (x1)
XLR (x1)
“Memory Stick” slot (x1)
XLR (x2) (channel selectable)
JM-60 Stereo phone jack
Servo lock time
Load/unload time
INPUT/OUTPUT SIGNALS
Analogue composite input
Analogue composite output
Analogue component input
Analogue component output
SDI input
SDI output
BNC (x2, including one loop through output),
1.0 Vp-p, 75 Ω , sync negative
BNC (x3, including one character out),
1.0 Vp-p, 75 Ω , sync negative
BNC (x3, for 1 set, Y/R-Y/B-Y),Y: 1.0 Vp-p, 75 Ω , sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
BNC (x3, for 1 set, Y/R-Y/B-Y),Y: 1.0 Vp-p, 75 Ω , sync negative, R-Y/B-Y: 0.7 Vp-p, 75 Ω
BNC (x2, including one active throughout),
SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
BNC (x3, including one character out),
SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
UHF operating frequency
Frequency response
Signal to noise
RF Power output
Current consumption
Battery life
Max SPL
Weight
Dimensions
W x H x D (mm)
Mounting/adaptor brackets required
Dependent on Dependent on version / region version / region
Dependent on version / region
40 Hz – 18 kHz 100 Hz – 15 kHz 40 Hz – 20 kHz
>60 dB
A-weighted
>60 dB
A-weighted
60 dB or more
N/A 10/50 mW
Switchable
230 mA
5 hours
N/A
400 g
200 mA
280 g
6 hours @ 50 mW
13 hours @ 10 mW
89 x 120 x 29.5
88 x 118 x 31
140 g incl batteries
63 x 83 x 17 no
40 Hz – 20 kHz
120 dB
1.5 g Capsule
3.5 x 3.5 x 12.5
Capsule
A8278-057A CA-WR855,
BTA-801 or A8278-057A
N/A 2.5 m Cable Length
* Or use WRT-847B Handheld Transmitter with either CU-F780, CU-G780, CU-E700,
CU-E672 or CU-F117 Capsule
PROCESSOR ADJUSTMENT RANGE
Video level
Chroma level
Black level
Chroma phase
System sync phase
System SC phase
Y/C delay
Composite input level
±3 dB/ ∞ to 3 dB selectable
±3 dB/ ∞ to 3 dB selectable
±210 mV
±30°
±15 µs
±200 ns
±100 ns (BETACAM/BETACAM
SP playback only)
±3 dB
Recommended Wireless Systems for Camcorder
WRR-862B
Receiver
WRR-855B
Receiver
WRT-8B
Transmitter*
ECM-88BC
Lavalier Mic
DIGITAL VIDEO PERFORMANCE
Sampling frequency
Quantization
Error correction
Digital input to analogue component output
Analogue component input to analogue component output
Analogue composite input to analogue composite output
Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz
Digital BETACAM:
10-bit / sample
Reed-Solomon code
Digital BETACAM:
10-bit / sample
D/A quantization: 10-bit / sample
Bandwidth: Y: 0 to 5.75 MHz +0.5/-2.0 dB,
R-Y/B-Y: 0 to 2.75 MHz +0.5/-2.0 dB
S/N ratio: 62 dB or more, K-factor (2T pulse): 1% or less
A/D and D/A quantization: 10-bit / sample
Bandwidth: Y: 0 to 5.75 MHz +0.5/-2.0 dB,
R-Y/B-Y: 0 to 2.75 MHz +0.5/-2.0 dB
S/N ratio: 56 dB or more, K-factor (2T pulse): 1% or less,
LF non-linearity: 3% or less
A/D and D/A quantization: 10-bit / sample
Bandwidth: 0 to 5.75 MHz +0.5/-2.0 dB
S/N ratio: 56 dB or more, Differential gain: 2% or less,
Differential phase: 2° or less
Y/C delay: 20 ns or less, K-factor (2T pulse): 1% or less
DIGITAL AUDIO PERFORMANCE
Sampling frequency
Quantization Digital BETACAM
48 kHz (synchronised with video)
20-bit / sample
Analogue input to analogue output Frequency response (0 dB at 1kHz): 20 Hz to 20 kHz +0.5/-1.0 dB
Dynamic range (at 1 kHz, emphasis ON): More than 95 dB
Distortion (at 1 kHz, emphasis ON, reference level):
Less than 0.05%
Cross talk (at 1 kHz, between any two channels):
Less than -80 dB Wow & flutter: Below measurable level
Head room
Emphasis
(ON/OFF selectable in REC mode)
20 dB (18 dB selectable)
T1=50 µs, T2=15 µs
SUPPLIED ACCESSORIES
* ISR: Interactive Status Reporting
—
PSW 4x16 Rack Mount Screw (x4), Operation manual (x1),
Installation manual (x1)
10
Compact Players
Specifications
J-30 J-30/SDI
GENERAL
Power requirements
Power consumption
Operating temperature
Storage temperature
Humidity
Mass
Dimensions (W x H x D)
AC 100 V to 240 V, 50/60 Hz
55 W
AC 100 V to 240 V, 50/60 Hz
55 W
+5 °C to +40 °C (+41 °F to + 104 °F) +5 °C to +40 °C (+41 °F to + 104 °F)
-20 °C to +60 °C (-4 °F to + 140 °F) -20 °C to +60 °C (-4 °F to + 140 °F)
25% to 80% (relative humidity)
8.2 kg ( 18 lb 1 oz)
307 x 100 x 397 mm
(12 1 ⁄
8 x 4 x 15 3 ⁄
4 inches)
96.7 mm/s
25% to 80% (relative humidity)
8.2 kg ( 18 lb 1 oz)
307 x 100 x 397 mm
(12 1 ⁄
8 x 4 x 15 3 ⁄
4 inches)
96.7 mm/s Tape speed Digital Betacam
MPEG IMX
Betacam SX
Betacam/
Betacam SP
Playback time Digital Betacam
MPEG IMX
64.467 mm/s (525 mode),
53.776 mm/s (625 mode)
59.515 mm (525 mode),
59.575 mm (626 mode)
118.6 mm/s (525 mode),
101.5 mm/s (625 mode)
Max. 124 min. with BCT-D124L
64.467 mm/s (525 mode),
53.776 mm/s (625 mode)
59.515 mm (525 mode),
59.575 mm (626 mode)
118.6 mm/s (525 mode),
101.5 mm/s (625 mode)
Max. 124 min. with BCT-D124L
Max. 184 min. (525 mode)/220 min. Max. 184 min. (525 mode)/220 min.
(625 mode) with BCT-184MXL (625 mode) with BCT-184MXL
Max. 194 min. with BCT-194SXLA Max. 194 min. with BCT-194SXLA
Max. 90 min. (525 mode)/108 min.
Max. 90 min. (525 mode)/108 min.
(625 mode) with BCT-90MLA (625 mode) with BCT-90MLA
Approx. 5 min. with BCT-D124L Approx. 5 min. with BCT-D124L
Betacam SX
Betacam/
Betacam SP
Fast forward/ Digital Betacam rewind time
MPEG IMX
Betacam SX
Approx. 5 min. with BCT-184MXL Approx. 5 min. with BCT-184MXL
Approx. 5 min. with BCT-194SXLA Approx. 5 min. with BCT-194SXLA
Betacam/
Betacam SP
Approx. 5 min. with BCT-90MLA Approx. 5 min. with BCT-90MLA
Digital Betacam ±20 times normal playback speed ±20 times normal playback speed Search speed range
MPEG IMX
Betacam SX
Betacam/
Betacam SP
Servo lock time
Load/unload time
±32 times normal playback speed
±35 times normal playback speed
±18 times (525 mode), ±20 times
±32 times normal playback speed
±35 times normal playback speed
±18 times (525 mode), ±20 times
(625 mode) normal playback speed (625 mode) normal playback speed
1.5 s or less (from standby on)
9 s or less
1.5 s or less (from standby on)
9 s or less
INPUT SIGNAL
Ext. sync BNC (x 1), Frame lock BNC (x 1), Frame lock
OUTPUT SIGNALS
Analogue composite output
S-video output
Analogue component output
SDI output i.LINK (DV output)
Time Code output
Monitor output L/R
Headphone output
BNC (x 1), RCA Phono (x1),
1.0 Vp-p, 75 Ω
Mini DIN 4-pin (x 1), Y: 1.0 Vp-p,
C: 0.286 Vp-p burst, 75 Ω
BNC (x 3), Y: 1.0 Vp-p,
R-Y/B-Y: 0.7 Vp-p, 75 Ω
—
BNC (x 1), RCA Phono (x1),
1.0 Vp-p, 75
—
Ω
Mini DIN 4-pin (x 1), Y: 1.0 Vp-p,
C: 0.286 Vp-p burst, 75 Ω
6-pin (x1), IEEE 1394
BNC (x 2), SMPTE 259M,
270 Mb/s, 0.8 Vp-p, 75 Ω
6-pin (x1), IEEE 1394
— BNC(x1), 1.0Vp-p, 75 Ω , unbalanced
RCA Phono (x 2): -10 dBu at 47K
Ω load, RCA Phono (x 2): -10 dBu at 47K
Ω load, unbalanced, XLR (male x 2): +4 dBm, unbalanced, XLR (male x 2): +4 dBm,
600
Ω load, low impedance, balanced 600
Ω load, low impedance, balanced
JM-60 Stereo Phone Jack, JM-60 Stereo Phone Jack,
∞ to -12 dBu at 8 Ω load, unbalanced ∞ to -12 dBu at 8 Ω load, unbalanced
REMOTE CONTROL
RS-422A
RS-232C
Wireless
D-sub 9-pin (female) (x 1),
Sony 9-pin remote interface
D-sub 9-pin (male) (x 1)
SIRCS
D-sub 9-pin (female) (x 1),
Sony 9-pin remote interface
D-sub 9-pin (male) (x 1)
SIRCS
SUPPLIED ACCESSORIES
Operation manual (CD-ROM), Operation manual (CD-ROM),
Operation manual, vertical stand (x 2), Operation manual, vertical stand (x 2),
Infra-red remote controller Infra-red remote controller
Services from Sony: working with you, working for you.
Recognising that every company and every challenge is unique, we offer a complete and comprehensive range of services all the way through consulting, planning, financing, implementation, training, servicing, maintenance and support. Choose exactly what’s right for you, when and where you need it.
Sony Professional Services: Tailor-made design, installation and project management of audio-visual and
IT (AV/IT) systems using skills developed over 25 years of systems integration.
Sony Financial Services: Innovative and flexible finance solutions designed to meet budgetary and financial requirements and constraints, enabling businesses to always have the most current technology.
Sony Training Services: A range of off-the-shelf or customised training services from basic operation through to high-level technical maintenance.
Sony Support Services: Fully integrated and customised support for products and systems throughout their operational life, combining proactive and reactive technical services
Not all services are available in all countries.
If you’d like to find out more about what we do, who we do it for and how we do it, visit http://www.sonybiz.net or contact your local Sony office.
Sony Services
11
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony Digital Betacam, Power HAD, Memory Stick, Betacam,
Betacam SX, MPEG IMX and Betacam SP are trademarks of Sony Corporation.
CA DIGITAL BETACAM FAMILY/GB-13/07/2005
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement