G-Series Hydraulic Dimensions Data Metric

G-Series Hydraulic Dimensions Data Metric
Data sheet
Sheet No.: GHM 3.01 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
G0110X.X (CW Model Shown)
Actuator Model
A
G01101.5
108.0
G01101.7
114.3
G01102.0
114.3
G01102.2
120.7
G01102.5
127.0
G01103.0
139.7
G01103.5
152.4
G0110X.X or G01120X.X (No. M11) (CW Model Shown)
120.7 DIA.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G01101.5-M11
108.0
G01101.7-M11
114.3
G01102.0-M11
114.3
G01102.2-M11
120.7
G01102.5-M11
127.0
G01103.0-M11
139.7
G01103.5-M11
152.4
Data sheet
Sheet No.: GHM 3.02 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
Mounting Pad Detail
Adjustable End Stops
& Jackscrews
Power
Module
Blind
End Cap
Module
Spring
Module
X (-ETS) Extended Travel Stop
726.2
402.1
1210.3
X (-33) End Stop
559.6
226.6
1023.9
Z (M3/M3HW) Jackscrew
C/F*
442.7
1184.4
C/F Consult Factory
Note:Jackscrews are not recommended for use on hydraulic cylinders. If used,
they are allowable on the Spring Module or Blind End Cap Modules ends only.
It is probable that some leakage of hydraulic fluid past the jackscrew pressure
containing thread seals will occur over time if used on the Power Module side,
negating any warranty for hydraulic Power Modules.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.03 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
G0110X.X-SR (CW Model Shown)
Actuator Model
A
G01101.5-SR
108.0
G01101.7-SR
114.3
G01102.0-SR
114.3
G01102.2-SR
120.7
G01102.5-SR
127.0
G01103.0-SR
139.7
G01103.5-SR
152.4
G0110X.X-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G01101.5-SR-M11
108.0
G01101.7-SR-M11
114.3
G01102.0-SR-M11
114.3
G01102.2-SR-M11
120.7
G01102.5-SR-M11
127.0
G01103.0-SR-M11
139.7
G01103.5-SR-M11
152.4
Data sheet
Sheet No.: GHM 3.04 RevC
Date: April 2015
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHM 3.05 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
G210X.X (CW Model Shown)
2X 3/8 NPT
Actuator Model
A
G2101.7
114.3
G2102.0
117.3
G2102.25
120.7
G2102.5
127.0
G2103.0
139.7
G2103.5
152.4
G2104.0
165.1
G210X.X-M11 or G2120X.X (No M11) (CW Model Shown)
2X 3/8 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
2X 3/8 NPT
Actuator Model
A
Actuator Model
A
G2101.7-M11
114.3
G21201.7
114.3
G2102.0-M11
117.3
G21202.0
117.3
G2102.25-M11
120.7
G21202.25
120.7
G2102.5-M11
127.0
G21202.5
127.0
G2103.0-M11
139.7
G21203.0
139.7
G2103.5-M11
152.4
G21203.5
152.4
G2104.0-M11
165.1
G21204.0
165.1
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.06 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X (-ETS)
Extended
Travel Stop
X
End
Stop
Power Module
719.3
543.8
C/F*
Blind End Cap Module
427.5
252.0
572.8
Spring Module
1224.8
1049.3
1278.9
C/F Consult Factory
*Note: Jackscrews are not recommended for use on hydraulic cylinders. If used,
they are allowable on the Spring Module or Blind End Cap Modules ends only.
It is probable that some leakage of hydraulic fluid past the jackscrew pressure
containing thread seals will occur over time if used on the Power Module side,
negating any warranty for hydraulic Power Modules.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Z*
(M3/M3HW)
Jackscrew
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.07 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
G210X.X-SR (CW Model Shown)
2X 3/8 NPT
Actuator Model
A
G2101.7-SR
114.3
G2102.0-SR
117.3
G2102.25-SR
120.7
G2102.5-SR
127.0
G2103.0-SR
139.7
G2103.5-SR
152.4
G2104.0-SR
165.1
G210X.X-SR-M11 (CW Model Shown)
2X 3/8 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G2101.7-SR-M11
114.3
G2102.0-SR-M11
117.3
G2102.25-SR-M11
120.7
G2102.5-SR-M11
127.0
G2103.0-SR-M11
139.7
G2103.5-SR-M11
152.4
G2104.0-SR-M11
165.1
Data sheet
Sheet No.: GHM 3.08 RevC
Date: April 2015
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHM 3.09 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
G310X.X (CW Model Shown)
2X 3/8 NPT
Actuator Model
A
G3002.0
120.7
G3002.25
127.0
G3002.5
133.4
G3003.0
139.7
G3003.5
152.4
G3004.0
165.1
G3004.5
177.8
G310X.X-M11 or G3120X.X (No M11) (CW Model Shown)
2X 3/8 NPT
2X 3/8 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G3002.0-M11
120.7
G30202.0
120.7
G3002.25-M11
127.0
G30202.25
127.0
G3002.5-M11
133.4
G30202.5
133.4
G3003.0-M11
139.7
G30203.0
139.7
G3003.5-M11
152.4
G30203.5
152.4
G3004.0-M11
165.1
G30204.0
165.1
G3004.5-M11
177.8
G30204.5
177.8
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.10 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X (-ETS)
Extended
Travel Stop
X
End
Stop
Power Module
840.5
623.1
C/F*
Blind End Cap Module
497.1
281.9
580.6
Spring Module
1353.8
1136.4
1397.0
C/F Consult Factory
*Note: Jackscrews are not recommended for use on hydraulic cylinders. If used,
they are allowable on the Spring Module or Blind End Cap Modules ends only.
It is probable that some leakage of hydraulic fluid past the jackscrew pressure
containing thread seals will occur over time if used on the Power Module side,
negating any warranty for hydraulic Power Modules.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Z*
(M3/M3HW)
Jackscrew
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.11 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
G310X.X-SR (CW Model Shown)
2X 3/8 NPT
Actuator Model
A
G3102.0-SR
120.7
G3102.25-SR
127.0
G3102.5-SR
133.4
G3103.0-SR
139.7
G3103.5-SR
152.4
G3104.0-SR
165.1
G3104.5-SR
177.8
G310X.X-SR-M11 (CW Model Shown)
2X 3/8 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G3102.0-SR-M11
120.7
G3102.25-SR-M11
127.0
G3102.5-SR-M11
133.4
G3103.0-SR-M11
139.7
G3103.5-SR-M11
152.4
G3104.0-SR-M11
165.1
G3104.5-SR-M11
177.8
Data sheet
Sheet No.: GHM 3.12 RevC
Date: April 2015
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHM 3.13 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
G410X.X (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G4102.5
143.8
G4103.0
165.1
G4103.5
171.5
G4104.0
180.8
G4104.5
190.5
G4105.0
203.2
G4106.0
225.6
G410X.X-M11 or G4120X.X (No M11) (CW Model Shown)
G410X.X-M11:
M11 Pump assembly
1452.1
487.9
2X access plug
.750-16unf
238.3
476.3
576.1
2x 1/2
.750NPT
-16unf
2X
2x .750
16unf
2X-1/2
NPT
278.9
643.6
108.0
176.3
589.8
1115.3
115.8
385.6
180.8 dia.
a dia.
g410X.X-M11:
hydraulic override module
g4120X.X: USE “a” dimension
hydraulic power module
drive module vent 3/8-18 npt
valve vent 3/8-18 npt
4x .500 - 13unc
x 13.1 deep
hydraulic
power module
4x 50b
101.6 SQ.
note: pump handle
shown stored. may be
moved up or down.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G4102.5-M11
143.8
G41202.5
143.8
G4103.0-M11
165.1
G41203.0
165.1
G4103.5-M11
171.5
G41203.5
171.5
G4104.0-M11
180.8
G41204.0
180.8
G4104.5-M11
190.5
G40204.5
190.5
G4105.0-M11
203.2
G41205.0
203.2
G4106.0-M11
225.6
G41206.0
225.6
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.14 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
Extended
Travel Stop
Power Module
1009.4
790.4
Blind End Cap Module
592.3
373.4
Spring Module
1539.5
1263.7
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
X
End Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.15 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
G410X.X-SR (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G4102.5-SR
143.8
G4103.0-SR
165.1
G4103.5-SR
171.5
G4104.0-SR
180.8
G4104.5-SR
190.5
G4105.0-SR
203.2
G4106.0-SR
225.6
G410X.X-SR-M11 (CW Model Shown)
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G4102.5-SR-M11
143.8
G4103.0-SR-M11
165.1
G4103.5-SR-M11
171.5
G4104.0-SR-M11
180.8
G4104.5-SR-M11
190.5
G4105.0-SR-M11
203.2
G4106.0-SR-M11
225.6
Data sheet
Sheet No.: GHM 3.16 RevC
Date: April 2015
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHM 3.17 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
G510X.X (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G5103.5
193.8
G5104.0
206.5
G5104.5
219.2
G5105.0
232.2
G5106.0
247.7
G5107.0
270.0
G5108.0
301.8
G510X.X-M11 or G5120X.X (No M11) (CW Model Shown)
2X 1/2 NPT
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G5103.5-M11
193.8
G51203.5
193.8
G5104.0-M11
206.5
G51204.0
206.5
G5104.5-M11
219.2
G51204.5
219.2
G5105.0-M11
232.2
G51205.0
232.2
G5106.0-M11
247.7
G51206.0
247.7
G5107.0-M11
270.0
G51207.0
270.0
G5108.0-M11
301.8
G51208.0
301.8
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.18 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
Extended
Travel Stop
Power Module
1271.8
979.9
Blind End Cap Module
717.6
441.5
Spring Module
1790.7
1333.5
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
X
End Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.19 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
G510X.X-SR (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G5103.5-SR
193.8
G5104.0-SR
206.5
G5104.5-SR
219.2
G5105.0-SR
232.2
G5106.0-SR
247.7
G5107.0-SR
270.0
G5108.0-SR
301.8
G510X.X-SR-M11 (CW Model Shown)
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G5103.5-SR-M11
193.8
G5104.0-SR-M11
206.5
G5104.5-SR-M11
219.2
G5105.0-SR-M11
232.2
G5106.0-SR-M11
247.7
G5107.0-SR-M11
270.0
G5108.0-SR-M11
301.8
Data sheet
Sheet No.: GHM 3.20 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
Lug/Accessory Details
.
.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.21 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
G71XX.X (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G7104.0
206.5
G7104.5
225.6
G7105.0
244.6
G7106.0
263.7
G7107.0
289.1
G7108.0
307.8
G7109.0
339.9
G7110.0
358.6
G71XX.X-M11 or G712XX.X (No M11) (CW Model Shown)
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
2X 1/2 NPT
Actuator Model
A
Actuator Model
A
G7104.0-M11
206.5
G71204.0
206.5
G7104.5-M11
225.6
G71204.5
225.6
G7105.0-M11
244.6
G71205.0
244.6
G7106.0-M11
263.7
G71206.0
263.7
G7107.0-M11
289.1
G71207.0
289.1
G7108.0-M11
307.8
G71208.0
307.8
G7109.0-M11
339.9
G71209.0
339.9
G7110.0-M11
358.6
G71210.0
358.6
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.22 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
End Stop
1186.7
Power Module
1548.6
Blind End Cap Module
902.5
540.5
Spring Module
2313.9
1382.8
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
X
Extended
Travel Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.23 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
G71XX.X-SR (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G7104.0-SR
206.5
G7104.5-SR
225.6
G7105.0-SR
244.6
G7106.0-SR
263.7
G7107.0-SR
289.1
G7108.0-SR
307.8
G7109.0-SR
339.9
G7110.0-SR
358.6
Actuator Model
A
G7104.0-SR-M11
206.5
G7104.5-SR-M11
225.6
G7105.0-SR-M11
244.6
G7106.0-SR-M11
263.7
G7107.0-SR-M11
289.1
G7108.0-SR-M11
307.8
G7109.0-SR-M11
339.9
G7110.0-SR-M11
358.6
G71XX.X-SR-M11 (CW Model Shown)
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.24 RevC
Date: April 2015
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHM 3.25 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
G81XX.X (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G8105.0
282.4
G8106.0
292.1
G8107.0
304.8
G8108.0
315.5
G8109.0
342.9
G8110.0
368.3
G8112.0
400.1
G81XX.X-M11 or G812XX.X (No M11) (CW Model Shown)
2X 1/2 NPT
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G8105.0-M11
282.4
G81205.0
282.4
G8106.0-M11
292.1
G81206.0
292.1
G8107.0-M11
304.8
G81207.0
304.8
G8108.0-M11
315.5
G81208.0
315.5
G8109.0-M11
342.9
G81209.0
342.9
G8110.0-M11
368.3
G81210.0
368.3
G8112.0-M11
400.1
G80212.0
400.1
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.26 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
End Stop
1381.5
Power Module
1801.9
Blind End Cap Module
1032.8
633.0
Spring Module
2845.8
1803.4
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
X
Extended
Travel Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.27 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
G81XX.X-SR (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G8105.0-SR
282.4
G8106.0-SR
292.1
G8107.0-SR
304.8
G8108.0-SR
315.5
G8109.0-SR
342.9
G8110.0-SR
368.3
G8112.0-SR
400.1
G81XX.X-SR-M11 (CW Model Shown)
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G8105.0-SR-M11
282.4
G8106.0-SR-M11
292.1
G8107.0-SR-M11
304.8
G8108.0-SR-M11
315.5
G8109.0-SR-M11
342.9
G8110.0-SR-M11
368.3
G8112.0-SR-M11
400.1
Data sheet
Sheet No.: GHM 3.28 RevC
Date: April 2015
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHM 3.29 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
G101XX.X (CW Model Shown)
Actuator Model
A
G10106.0
308.9
G10107.0
333.5
G10108.0
365.3
G10109.0
378.0
G10110.0
396.7
G10112.0
454.2
G10114.0
505.0
G101XX.X-M11 or G1012XX.X (No M11) (CW Model Shown)
2X 1/2 NPT
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G10006.0-M11
308.9
G100206.0
308.9
G10007.0-M11
333.5
G100207.0
333.5
G10008.0-M11
365.3
G100208.0
365.3
G10009.0-M11
378.0
G100209.0
378.0
G10010.0-M11
396.7
G100210.0
396.7
G10012.0-M11
454.2
G100212.0
454.2
G10014.0-M11
505.0
G100214.0
505.0
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.30 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
End Stop
1669.0
Power Module
2262.6
Blind End Cap Module
1325.6
757.4
Spring Module
3429.5
2051.6
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
X
Extended
Travel Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHM 3.31 RevC
Date: April 2015
G-Series
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
G101XX.X-SR (CW Model Shown)
2X 1/2 NPT
Actuator Model
A
G10106.0-SR
308.9
G10107.0-SR
333.5
G10108.0-SR
365.3
G10109.0-SR
378.0
G10110.0-SR
396.7
G10112.0-SR
454.2
G10114.0-SR
505.0
G101XX.X-SR-M11 (CW Model Shown)
2X 1/2 NPT
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G10106.0-SR-M11
308.9
G10107.0-SR-M11
333.5
G10108.0-SR-M11
365.3
G10109.0-SR-M11
378.0
G10110.0-SR-M11
396.7
G10112.0-SR-M11
454.2
G10114.0-SR-M11
505.0
Data sheet
Sheet No.: GHM 3.32 RevC
Date: April 2015
Dimensions – (Hydraulic) mm.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement