LRY-517
RC7793CML.AA1ULL_RV0011V_ENG
VCR & DVD
RECORDER
OWNER’S MANUAL
MODEL: LRY-517
Before connecting, operating or adjusting this product, please
read this owner’s manual carefully and completely.
Call us and we will
guide you through
your first recording,
for free.
1-800-243-0000
Downloaded From Disc-Player.com LG Manuals
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a confined
space such as a bookcase or similar unit.
REGULATORY INFORMATION: FCC Part 15
This epuipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the product is operated in a residential installation. This
product generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception, which can be determined by turning the
product off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the product and
receiver.
•
Connect the product into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC COMPLIANCE: The responsible party for this product’s compliance is:
LG Electronics U.S.A., Inc.,1000 Sylvan Avenue,
Englewood Cliffs, NJ.
Phone: 1-800-243-0000.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check
the specification page of this owner's manual to be certain.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized
service center.
Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, should be placed on the apparatus.
CAUTION: CLASS 2M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCKS DEFEATED
DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
FCC WARNING: This equipment may generate or use
radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the
modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is
made.
2
Downloaded From Disc-Player.com LG Manuals
Do not overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or
fire. Periodically examine the cord of your appliance, and if
its appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized
servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
SERIAL NUMBER:
You can find the serial number on the back of the unit. This
number is unique to this unit and not available to others.
You should record requested information here and retain
this guide as a permanent record of your purchase.
Model No. ______________________________
Serial No. ______________________________
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and operating
instructions should be read before the product is operated.
2. Keep these instructions. - The safety, operating and use
instructions should be retained for future reference.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
11. Only use attachments/accessories specified by the
manufacturer.
3. Heed all warnings. - All warnings on the product and in
the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use instructions should be followed.
5. Do not use this product near water. – For example: near
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement; or near a swimming pool; and other areas
located near water.
6. Clean only with dry cloth. – Unplug this product from the
wall outlet before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. - Slots and
openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it
from over- heating. The openings should never be blocked
by placing the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have
been adhered to.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving
the cart/product combination to avoid injury from
tip-over.
13. Unplug this product during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the product, the product has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Dubbing
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
3
Downloaded From Disc-Player.com LG Manuals
INTRODUCTION
Symbol Used in this Manual . . . . . . . . . . . . . .6
About the
Symbol Display . . . . . . . . . . . . .6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .6
Moisture Condensation . . . . . . . . . . . . . . . . . .6
Recordable and Playable Discs . . . . . . . . . . .7
The recommendable recordable DVD discs . .7
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .8
Regional code of the recorder and DVDs . . . .8
Restrictions on video recording . . . . . . . . . . .9
What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . . . . .9
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Notice for Progressive Scan Use . . . . . . . . . .9
Card useable on this unit . . . . . . . . . . . . . . .10
Using Memory Card . . . . . . . . . . . . . . . . . . . .10
About the Remote Control . . . . . . . . . . . . . .10
Disc-related terms . . . . . . . . . . . . . . . . . . . . .11
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . .12
Function Display Window . . . . . . . . . . . . . . .13
Remote Control . . . . . . . . . . . . . . . . . . . . . . .14
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .15
HOOKUP AND SETTINGS
Connecting an Antenna or Cable TV . . . . . .16
Connections to your TV . . . . . . . . . . . . . .16-17
Optional TV Connections . . . . . . . . . . . . . . .17
Connection to an Amplifier . . . . . . . . . . .17-18
Initial Settings . . . . . . . . . . . . . . . . . . . . . .19-26
General Operation . . . . . . . . . . . . . . . . . . . .19
General Settings . . . . . . . . . . . . . . . . . . .19-21
• Tuning Band Select . . . . . . . . . . . . . . . .19
• Auto Channel Set . . . . . . . . . . . . . . . . .19
• To Add or Erase Channels from
Memory . . . . . . . . . . . . . . . . . . . . . . . . .20
• Clock Set . . . . . . . . . . . . . . . . . . . . . . . .20
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . .20
• Progressive Scan . . . . . . . . . . . . . . . . .21
• Power Save Mode . . . . . . . . . . . . . . . . .21
• Factory Setting . . . . . . . . . . . . . . . . . . .21
Language Settings . . . . . . . . . . . . . . . . . . . .21
• Display Menu . . . . . . . . . . . . . . . . . . . . .21
• Disc Menu / Audio / Subtitle . . . . . . . . . .21
Audio Settings . . . . . . . . . . . . . . . . . . . . . . .22
• Dolby Digital / DTS / MPEG . . . . . . . . . .22
• Sampling Freq. (Frequency) . . . . . . . . . .22
• DRC (Dynamic Range Control) . . . . . . .22
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Lock (Parental Control) Settings . . . . . . . . . .23
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . .23
• Set Password . . . . . . . . . . . . . . . . . . . .23
• Area Code . . . . . . . . . . . . . . . . . . . . . . .23
Recording Settings . . . . . . . . . . . . . . . . . . . .24
• Disc Record Mode . . . . . . . . . . . . . . . . .24
• VCR Record Mode . . . . . . . . . . . . . . . .24
• DV Record Audio . . . . . . . . . . . . . . . . . .24
• Auto Chapter . . . . . . . . . . . . . . . . . . . . .24
4
Downloaded From Disc-Player.com LG Manuals
Disc Settings . . . . . . . . . . . . . . . . . . . . . .24-26
• Initialize . . . . . . . . . . . . . . . . . . . . . . . . .24
• Finalize . . . . . . . . . . . . . . . . . . . . . . . . .25
• Disc Label . . . . . . . . . . . . . . . . . . . . . . .25
• Disc Protect . . . . . . . . . . . . . . . . . . . . . .25
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . .26
• AutoPlay . . . . . . . . . . . . . . . . . . . . . . . .26
• DivX Registration Code . . . . . . . . . . . . .26
General Explanation of On-Screen
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Displaying Information While Watching TV . .27
Displaying Disc Information on-screen . . . . .27
PLAYBACK
VCR Tape Playback . . . . . . . . . . . . . . . . .28-29
Basic Instructions . . . . . . . . . . . . . . . . . . . . .28
Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .28
Manual Tracking . . . . . . . . . . . . . . . . . . . . . .28
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Still Picture and Frame-by Frame Playback .28
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .28
Counter Memory Function . . . . . . . . . . . . . .29
S-VHS Quasi Playback (SQPB) . . . . . . . . . .29
Playing a DVD or Video CD . . . . . . . . . . .29-32
Playback Setup . . . . . . . . . . . . . . . . . . . .29-32
• Moving to another TITLE . . . . . . . . . . .29
• Moving to another CHAPTER / TRACK .29
• Slow Motion . . . . . . . . . . . . . . . . . . . . . .30
• Search . . . . . . . . . . . . . . . . . . . . . . . . . .30
• Time Search . . . . . . . . . . . . . . . . . . . . .30
• Marker Search . . . . . . . . . . . . . . . . . . .30
• Random . . . . . . . . . . . . . . . . . . . . . . . .30
• Still Picture and Frame-by-Frame
Playback . . . . . . . . . . . . . . . . . . . . . . . .31
• Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . .31
• Repeat . . . . . . . . . . . . . . . . . . . . . . . . .31
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . .31
• Title Menu . . . . . . . . . . . . . . . . . . . . . . .31
• Disc Menu . . . . . . . . . . . . . . . . . . . . . . .31
• Camera Angle . . . . . . . . . . . . . . . . . . . .31
• Subtitles . . . . . . . . . . . . . . . . . . . . . . . .31
• Changing the Audio Soundtrack . . . . . . .32
• Changing the Audio Channel . . . . . . . . .32
• 3D Surround . . . . . . . . . . . . . . . . . . . . .32
• Last Condition Memory . . . . . . . . . . . . .32
• Finding Locations on a Disc . . . . . . . . . .32
Playing a DivX Movie File . . . . . . . . . . . . .33-34
Notice for displaying the DivX subtitle . . . . . .33
Movie menu options . . . . . . . . . . . . . . . . . . .33
About DivX movie files . . . . . . . . . . . . . . . . .34
Playing an Audio CD or MP3/WMA files . .35-36
Audio CD and Music menu options . . . . . . . .35
Audio CD and MP3/WMA file Features . . . . .35
• Pause . . . . . . . . . . . . . . . . . . . . . . . . . .35
• Moving to another Track . . . . . . . . . . . .35
• Repeat . . . . . . . . . . . . . . . . . . . . . . . . .35
• Changing the Audio Channel . . . . . . . . .36
• Random . . . . . . . . . . . . . . . . . . . . . . . .36
RECORDING
About DVD recording . . . . . . . . . . . . . . . . . .40
Disc types and recording formats, modes, and
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Notes for recording . . . . . . . . . . . . . . . . . . . .40
Basic Recording from a TV . . . . . . . . . . . . . .41
Instant Timer Recording . . . . . . . . . . . . . .41-42
Checking the Recording Time . . . . . . . . . . . .41
To Extend the Recording Time . . . . . . . . . . .41
To Pause the Recording . . . . . . . . . . . . . . . .41
To record one TV program while watching
another . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Timer Recording . . . . . . . . . . . . . . . . . . . .42-43
Checking Timer Recording Details . . . . . . . .42
Canceling a Timer Recording . . . . . . . . . . . .42
Timer Recording Troubleshooting . . . . . . . . .43
Playing while you are recording . . . . . . . . . .43
Dubbing from DVD to VCR . . . . . . . . . . . . . .44
Dubbing from VCR to DVD . . . . . . . . . . . . . .44
Recording from External Components . . . . .45
Additional Information . . . . . . . . . . . . . . . . .45
Recording from DV Input . . . . . . . . . . . . . . .46
Before DV dubbing . . . . . . . . . . . . . . . . . . . .46
Recording from a Digital Camcorder . . . . . . .46
Troubleshooting . . . . . . . . . . . . . . . . . . . . . .46
Changing Title Thumbnails . . . . . . . . . . . . . .48
Making a New Playlist . . . . . . . . . . . . . . . . . .49
Adding Additional Title/Chapters to the
Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Deleting an Original or Playlist Title/
Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . .50
Naming a Title . . . . . . . . . . . . . . . . . . . . . . . .51
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .51
Divide One Titles Into Two . . . . . . . . . . . . . .52
Combining Two Chapters Into One . . . . . . . .52
Moving a Playlist Chapter . . . . . . . . . . . . . . .53
Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . .53
Protect a Title . . . . . . . . . . . . . . . . . . . . . . . .53
Overwriting Recording . . . . . . . . . . . . . . . . .54
Viewing Title List menu displayed on other
DVD Recorders or Players . . . . . . . . . . . . . .54
Playing Your Recordings on Other DVD
Players (Finalizing a Disc) . . . . . . . . . . . . . . .54
REFERENCE
Controlling Your TV with the Supplied
Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Language Code List . . . . . . . . . . . . . . . . . . .56
Area Codes List . . . . . . . . . . . . . . . . . . . . . . .56
Troubleshooting . . . . . . . . . . . . . . . . . . . .57-59
Reset the Recorder . . . . . . . . . . . . . . . . . . .59
Specifications . . . . . . . . . . . . . . . . . . . . . .60-61
Dubbing
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . .36
• Search . . . . . . . . . . . . . . . . . . . . . . . . . .36
Notes on MP3/WMA Recordings . . . . . . . . . . .36
• MP3/WMA disc compatibility with this
unit is limited as follows: . . . . . . . . . . . .36
Program Playback with Audio CD and
MP3/WMA files . . . . . . . . . . . . . . . . . . . . . . . .37
Program List menu options . . . . . . . . . . . . . .37
• Repeat Programmed Tracks . . . . . . . . .37
• Erasing a Track from the Program List . .37
• Changing Track Order in the
Program List . . . . . . . . . . . . . . . . . . . . .37
Viewing a JPEG files . . . . . . . . . . . . . . . .38-39
Photo menu options . . . . . . . . . . . . . . . .38-39
• Still picture . . . . . . . . . . . . . . . . . . . . . . .38
• Skip Images . . . . . . . . . . . . . . . . . . . . .38
• Rotate Images . . . . . . . . . . . . . . . . . . . .38
• View Slide Shows . . . . . . . . . . . . . . . . .39
About JPEG image files . . . . . . . . . . . . . . . .39
• JPEG disc compatibility with this
recorder is limited as follows : . . . . . . . .39
EDITING
Title List and Chapter List Menu Overview .47
VR Mode: Original and Playlist Editing . . . .48
Titles, Chapters and Parts . . . . . . . . . . . . . .48
Is editing a DVD like editing a video tape? . .48
About word ‘Original’ and ‘Playlist’ . . . . . . . .48
Adding Chapter Markers . . . . . . . . . . . . . . . .48
5
Downloaded From Disc-Player.com LG Manuals
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference.
Symbol Used in this Manual
Indicates hazards likely to cause harm to
the unit itself or other material damage.
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task
easier.
About the
Symbol Display
“
” may appear on your TV display during operation
and indicates that the function is not permitted by this
unit or the disc.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
A section whose title has one of the following symbols are applicable only to those discs represented
by the symbol.
-RWVR DVD-RW with VR recording mode
-RWVideo DVD-RW with Video recording mode
RAM DVD-RAM disc
+RW DVD+RW disc
-R DVD-R disc
+R DVD+R disc
DVD DVD-Video disc
DivX DivX files
VCD Video CDs
ACD Audio CDs
MP3 MP3 files
WMA WMA files
JPEG JPEG files
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Moisture Condensation
Never operate this product immediately after moving it from a cold location to a warm location. Leave
it for two or three hours without operating it. If you
use this product in such a situation, it may damage
discs/tapes and internal parts.
6
Downloaded From Disc-Player.com LG Manuals
Introduction
Recordable and Playable Discs
DVD-RW (DVD - ReWritable)
DVD-RW discs can be formatted for VR mode recording or Video mode recording.
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the
same Disc.
[VR mode]
Recordings can be extensively edited
Playable only on VR mode compatible players (after finalization)
[Video mode]
Playable on regular DVD players (after finalization)
Limited editing features
DVD-R (DVD - Recordable)
These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.
DVD-R discs can be only formatted to Video mode.
Playable on regular DVD players (after finalization)
Limited editing features
DVD-RAM (DVD - Random Access Memory)
DVD-RAM discs can be formatted for VR mode recording.
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the
same Disc.
Playable on DVD-RAM compatible players.
Recordings can be extensively edited.
Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.
You cannot use the cartridge-type DVD-RAM disc in this unit.
DVD+RW (DVD+ ReWritable)
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the
same Disc.
Playable on DVD+RW compatible players (automatically finalization)
The edited contents are playable on DVD+RW compatible players only after finalization.
Recordings can be edited the title/chapter
DVD+R (DVD + Recordable)
These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any
more.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added
chapter mark, etc.)
Limited title/chapter editing features.
DVD+R DL (DVD + Recordable; Double Layer)
These Discs can be recorded only once. After you finalize a DVD+R DL, you cannot record on it or edit it any
more.
Storage space is nearly doubled with double layer DVD+R media, allowing consumers to record up to 8.5GB
of video on a single DVD+R DL disc.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter combine, added
chapter mark, etc.)
Limited title/chapter editing features.
Recommended recordable DVD discs
DVD-R
DVD+R
DVD-RW
DVD+RW
DVD+R(DL)
DVD-RAM
SONY (8x, 16x)
SONY (2.4x, 4x, 8x, 16x)
Victor (1x, 4x)
SONY (2.4x)
Mitsubishi (2.4x)
Maxell (3x, 5x)
TDK (4x, 8x)
TDK (4x)
Maxell (1x, 2x, 4x)
TDK (2.4x)
Maxell (2.4x)
-
Verbatim (4x, 8x)
Mitsubishi (4x, 8x)
VerbatimTDK (2x)
Philips (4x)
-
-
Panasonic (2x, 4x)
Ricoh (2x, 4x, 8x)
Mitsubishi (2x)
Ricoh (2.4x)
-
-
-
-
-
HP (2.4x, 4x)
-
-
7
Downloaded From Disc-Player.com LG Manuals
Playable Discs
DVD (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented
Video CD (VCD) (8 cm / 12 cm disc)
VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format
Audio CD (8 cm / 12 cm disc)
Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased
CD-R/CD-RW (8 cm / 12 cm disc)
CD-R/CD-RW discs that contain audio titles, MP3, WMA, JPEG or DivX files.
Notes:
• Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some
CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
•
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
•
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
•
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW)
may not be playable.
•
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD
Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s
lens.
•
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are
cases in which it may not play because of the settings of the application software used to create the disc.
(Check with the software publisher for more detailed information.)
Region code of the recorder and DVDs
1
ALL
This recorder is designed and manufactured for playback of Region 1 encoded DVD software. The region code on the labels of some DVD discs indicates which type of the recorder
can play those discs. This unit can play only DVD discs labeled 1 or ALL. If you try to play
any other discs, the message “Incorrect region code. Can’t play back” will appear on the TV
screen. Some DVD discs may not have a region code label even though their playback is
prohibited by area limits.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As
this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some
playback features of the unit may not be available or other functions may be added.
Refer also to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be played on the unit.
8
Downloaded From Disc-Player.com LG Manuals
Notice for Progressive Scan Use
•
You cannot record copy-protected video using this
recorder. Copy-protected video includes DVDVideo discs and some satellite broadcasts. If
copy-protected material is encountered during a
recording, recording will pause or stop automatically and an error message will be displayed onscreen.
•
Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode or DVDRAM disc with CPRM (see below).
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL 525p
DVD+VCR RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
Introduction
Restrictions on video recording
What is ‘CPRM’?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
This Recorder is CPRM compatible, which means
that you can record copy-once broadcast programs,
but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVDRW discs formatted in VR mode or DVD-RAM discs,
and CPRM recordings can only be played on players
that are specifically compatible with CPRM.
Copyright
•
Recording equipment should be used only for lawful copying and you are advised to check carefully
what is lawful copying in the area in which you
are making a copy. Copying of copyright material
such as films or music is unlawful unless permitted by a legal exception or consented to by the
rights owner.
•
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only, unless
otherwise authorized by Macrovision corporation.
Reverse engineering or disassembly is prohibited.
9
Downloaded From Disc-Player.com LG Manuals
Card useable on this unit
•
Compact Flash Card (CF)
•
Micro Drive (MD)
•
Secure Digital Card (SD)
•
Multi Media Card (MMC)
•
SmartMedia Card (SMC)
•
xD-Picture Card (xD)
•
Memory Stick (MS)
•
Memory Stick Pro (MS-Pro)
•
Compatible with: FAT 12, FAT 16, or FAT 32
•
Only use the memory cards recommended above.
Using Memory Card
1. Insert a memory card.
2. Press MEMORY on the Remote Control while in
the DVD Tuner mode.
The Memory Card slot choice menu appears on
the TV screen.
Regarding Write Protect
For cards that have a write protect switch, if the
switch is on it will not be possible to write or erase
the card.
3. Use v/Vto select the desired Memory Card slot
then press ENTER.
The Photo or Music menu appears on the TV
screen.
Inserting/Removing the Memory Card
4. Press RETURN to exit the Photo or Music menu
for memory card.
Note:
For details on each operation item, refer to relevant pages.
Insert CF or MD card
Insert SD, MMC, SMC,
xD, MS, or MS-Pro card
Inserting the card: Insert straight-in until it fits into
place.
Removing the card: Withdraw the card carefully.
Notes:
• Keep the memory card out of reach of children. If
swallowed, seek medical advice immediately.
• Some memory card may not work in this recorder,
depending on the formatting.
• Do not extract the memory card while operating (play, copy, etc.).
About the Remote Control
Battery installation
Point the Remote Control at the remote sensor and
press the buttons.
Detach the battery cover on the rear
of the Remote Control, and insert two
(R03/AAA) size batteries with 3 and
# aligned correctly.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Angle:
About 30° in each direction of the front of
the remote sensor.
Do not mix old and new batteries and never
mix different types of batteries such as standard, alkaline, etc.
Operation Range
10
Downloaded From Disc-Player.com LG Manuals
DVD +R (Double Layer)
Double layer recording technology offers two recordable layers on a single DVD disc, providing nearly
double the capacity of 4.7GB single layer DVDs. The
greatest, most valuable benefit of double layer
recording technology is increased capacity. Storage
space is nearly doubled with double layer DVD+R
media, allowing consumers to burn up to 8.5GB of
video on a single DVD+R disc.
DVD ±R / DVD ±RW
DVD -R and DVD +R are two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc only
once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.7 GB and double-sided discs hold twice as much.
DVD-RAM
DVD-RAM disc can be formatted in DVD-Video
Recording format (VR mode). This type of disc is able
to be rewritten and edited.
VCD (Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along with quality stereo sound.
MPEG
MPEG is an international standard for video and
audio compression. MPEG-1 is used in encoding
video for VCD and provides for multichannel surround
sound coding such as PCM, Dolby Digital, DTS and
MPEG audio.
MP3
MP3 is a popular compression format used for digital
audio files that yields very high near-CD quality.
WMA
Windows media audio file. A type of coding / decoding developed by Microsoft Corp.
DivX
DivX is the name of a revolutionary new video codec
which is based on the new MPEG-4 compression
standard for video.You will be able to play DivX
movies using this recorder.
Introduction
Disc-related terms
PBC: Playback Control (Video CD only)
Playback control is available for Video CD (VCD) version 2.0 disc formats. PBC allows you to interact with
the system via menus, search functions, or other typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included
in the disc. Video CDs not equipped with PBC
(Version 1.1) operate in the same way as audio CDs.
Title (DVD video discs only)
A title is generally a distinct section of a DVD disc.
For example the main feature could be title 1, a documentary describing how the film was made could be
title 2, and cast interviews could be title 3. Each title
is assigned a reference number enabling you to
locate it easily.
Chapter (DVD video discs only)
A chapter is a segment of a title such as a scene in a
film or one interview in a series. Each chapter is
assigned a chapter number, enabling you to locate
the chapter you want. Depending on the disc, chapters may not be recorded.
Scene (VCD)
On a video CD with PBC (playback control) functions,
moving pictures and still pictures are divided into sections called “scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want. A scene is composed of one or several tracks.
Track
A distinct element of audiovisual information, such as
the picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video (with multiple angles) and several
tracks of audio.
JPEG
Joint Pictures Expert Group. JPEG is a compressed
file format that allows you to save images with no
limit on the number of colors.
11
Downloaded From Disc-Player.com LG Manuals
Front Panel
a
b
f
c
g
h
a
POWER button and indicator
Switches the Recorder ON and OFF.
Lights green when the Recorder is turned on.
b
Disc Tray (DVD deck)
Insert a disc here.
c
Z OPEN/CLOSE
Opens or closes the disc tray.
d
Cassette Compartment (VCR deck)
Insert a video cassette here.
e
Z EJECT
Ejects the tape in the VCR deck.
f
AV 2 IN
- VIDEO /AUDIO (Left/Right)
Connect the audio/video output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
- S-VIDEO IN
Connect the S-Video output of an external source
(TV/ Monitor, VCR, Camcorder, etc.).
g
DV IN
Connect the DV output of a digital camcorder.
h
MEMORY CARD Slot
Insert a memory card
(CF, MD, SMC, MMC, SD, MS, MS-Pro or
XD-Picture).
d
i
e
j kl mn o p
q
i
Display window
Shows the current status of the Recorder.
j
Remote Sensor
Point the Recorder Remote Control here.
k
DVD/VCR indicator
Indicates the active DVD or VCR deck.
l
DVD/VCR
Toggles control between the DVD deck and the
VCR deck.
m
z (REC)
Starts recording.
Press repeatedly to set the recording time.
n
N (PLAY)
To play back a disc or tape.
o
x (STOP)
Stops playback.
p
CH (v / V)
Scans up or down through memorized channels.
q
DUB (DUBBING)
Press to copy DVD to VCR (or VCR to DVD).
LOCK function
The Lock feature disables the front panel buttons to
prevent children from tampering with this unit.
Simply press LOCK on the remote control to toggle
this feature on and off.
12
Downloaded From Disc-Player.com LG Manuals
DVD
SVCD
M.CARD
A
B
PRG TTL
VR TV
Indicates the type of disc loaded.
DVD
SVCD
Indicates when Memory Card is
activated.
M.CARD
A
REC
B
CHP TRK
DUB
CHP TRK
Indicates current chapter or track
number
DUB
Indicates that a DVD to VCR (or
VCR to DVD) dubbing is in
progress.
Indicates when the Recorder is
Locked.
Hi-Fi
Indicates when the Recorder is
playing
a tape in Hi-Fi.
ST
Indicates a stereo broadcast is
being received.
SAP
Indicates when a SAP BILINGUAL
The recorder is recording.
Programmed playback active.
TTL
Indicates current title.
A disc is inserted in the DVD deck.
SAP
Indicates that TV mode is active.
Indicates repeat mode.
PRG
ST
TV
Indicates when the recorder is in
timer recording or a timer recording
is programmed.
REC
Hi-Fi
Introduction
Function Display Window
broadcast is being received.
A VHS tape is inserted in the VCR
deck.
VR
Indicates a DVD-RW disc (VR
mode only) or DVD-RAM disc is
inserted in the DVD deck.
Indicates clock, total playing time,
elapsed time, remaining time, title
number, chapter/track number,
channel, etc.
13
Downloaded From Disc-Player.com LG Manuals
Remote Control
BACKWARD / FORWARD
(m/M)
RANDOM
- DVD: Search backward or forward.
- VCR: Rewinds/Advances the tape
during the STOP mode, for fast
reverse/ forward picture search.
REC MODE
CHP ADD
z REC
Inserts a chapter marker when playing/
recording.
CH/TRK(v/V): Selects a program.
Adjusts manually the tape’s picture
onscreen.
CLEAR
Removes a mark on the Marker
Search menu.
DISPLAY
Accesses On-Screen Display.
Displays information of current status.
DUBBING
Press to copy DVD to VCR (or VCR to
DVD).
DVD
Select the Recorder’s function mode to
DVD.
EJECT, OPEN/CLOSE
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
ENTER ( )
Confirms menu selections.
INPUT
Changes the input to use for recording
(Tuner, AV1, AV2, or DV IN).
LIST/DISC MENU
Accesses menu on a DVD disc, Title
List or Playlist menu.
LOCK
Locks/unlocks front panel buttons.
MARKER
Marks any point during playback.
MEMORY
Accesses the Photo (or Music) menu
for memory card.
POWER
Turns Recorder ON and OFF.
PAUSE/STEP (X)
Plays tracks in random order.
Selects the recording mode:
- DVD : SP, LP, EP or XP.
- VCR : SP or SLP.
Starts recording. Press repeatedly to
set the recording time.
STOP (x)
Stops playback or recording.
SEARCH
Displays Marker Search menu.
SETUP
Accesses or removes the Setup menu.
SKIP (. / >)
Go to next chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
SUBTITLE
Selects a subtitle language.
TITLE
Displays the disc’s Title menu, if
available.
THUMBNAIL
Selects a thumbnail picture for the
current title for use in the Title List or
Chapter List menu.
TIMER REC
Displays Timer Record menu.
TIME SHIFT
To play the title being recorded
and also currently being recorded
appears as PIP.
TV Control Buttons
See page 55.
TV/VCR
To view channels selected by the VCR
tuner or by the TV tuner.
VCR
Select the Recorder’s function mode to
VCR.
ZOOM
Enlarges DVD video image.
0-9 numerical buttons
- Selects numbered options in a menu.
Repeats sequence between two points
(A and B)
Pause playback or recording
temporarily.
Press repeatedly for frame-by-frame
playback.
- Inputs channel numbers.
ANGLE
RETURN (O)
Starts playback.
Selects a DVD camera angle,
if available.
- Removes the menu.
- Displays the menu of a video CD
with PBC.
b B v V (left/right/up/down)
A-B
AUDIO
Selects an audio language (DVD) or
an audio channel (CD).
14
Downloaded From Disc-Player.com LG Manuals
REPEAT
Repeat chapter, track, title or all.
N (PLAY)
Selects menu options.
a
b
h
cd ef
i j
a
ANT.IN
Connect the antenna to this terminal.
b
AC Power Cord
Plug into the power source.
c
AV 1 IN (VIDEO IN /AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, VCR,
Camcorder).
d
AV OUT (VIDEO OUT/AUDIO OUT (Left/Right))
Connect to a TV with video and audio inputs.
e
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
Introduction
Rear Panel
g
k
f
AUDIO OUT (Left/Right)
Connect to a TV or other equipment with audio
inputs.
g
Cooling fan
h
RF. OUT
Connect to a TV with RF coaxial inputs.
i
OPTICAL (DIGITAL AUDIO OUT jack)
Connect to digital (optical) audio equipment.
j
S-VIDEO OUT
Connect to a S-Video Input on TV.
k
COAXIAL (DIGITAL AUDIO OUT jack)
Connect to digital (coaxial) audio equipment.
Caution
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
Hookup and Settings
Depending on your TV and other equipment there are various ways you can connect the
recorder. Please refer to the manuals of your TV, VCR, Stereo System or other devices as
necessary for additional connection information.
Notes:
•
Make sure the Recorder is connected directly to the TV and tune the TV to the correct video input channel.
•
Do not connect the Recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Do not connect the Recorder via another VCR. The DVD image could be distorted by the copy protection system.
•
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from
each other or turn off the unit after removing the disc.
15
Downloaded From Disc-Player.com LG Manuals
Connecting an Antenna
or Cable TV
To view or record a CATV channel
a Antenna:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT.IN on your Recorder. If your antenna cable is flat
connect it to a 300-ohm to 75-ohm antenna adaptor
(not supplied) and slip the adaptor over the ANT.IN
jack. Don’t attempt to screw it into to the Recorder.
2. Set the Recorder channel selector to the cable
output channel. (Example: CH3)
b Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the Recorder. If a converter is required connect a coaxial cable from the
wall jack to the IN connector on the converter, and a
coaxial cable from the OUT connector on the converter to the ANT.IN on your Recorder. This cable hookup
permits both TV and Recorder operation.
a
Antenna
Antenna
1. Tune the TV to the Recorder output channel (CH
3 or 4).
3. Select a channel using the cable converter.
Notes:
•
With this connection, you cannot record one program
while viewing another.
•
If you are using a cable box to tune channels, it is not
necessary to do Auto Channel Set.
Connections to your TV
Make one of the following connections, depending on
the capabilities of your TV.
Rear of TV
ANTENNA
INPUT
VIDEO
INPUT
AUDIO INPUT
L
OR
OR
R
V
R
A1
Rear of Recorder
b
Rear of
Rear
ofRecorder
Recorder
S
C
Pr
S-VIDEO
INPUT
Rear of TV
16
Downloaded From Disc-Player.com LG Manuals
A2
Pb
Y
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
R
L
AUDIO INPUT
Connect the RF.OUT jack on the Recorder to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
How to set the Recorder’s RF output channel
1. When the Recorder is turned off, press and hold
CH (V/v) on the front panel for more than five
seconds. [RF-03] or [RF-04] appears in the display window.
2. Press CH (V/v) to change the RF output channel
(RF-03 or RF-04).
3. Tune the TV to this channel.
Video connection
Connect the DVD/VCR VIDEO OUT jack on the
Recorder to the video in jack on the TV using the
video cable supplied (V).
Note:
If you use this connection, set the TV’s source selector to
VIDEO.
S-Video connection
Connect the S-VIDEO OUT jack on the Recorder to
the S-Video in jack on the TV using the optional SVideo cable (S).
Notes:
•
Set Progressive Scan option to [ON] in the setup menu,
see page 21.
•
Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
•
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled.
•
When you use Component Video signal, set the
Progressive Scan to [OFF] on the setup menu.
Audio connection
Hookup and
Settings
RF coaxial connection
Connect the Left and Right DVD/VCR AUDIO OUT
jacks on the Recorder to the audio left/right in jacks
on the TV using the supplied audio cables (A1 or A2).
Connection to an Amplifier
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the Recorder to the
audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A) supplied.
Rear of Recorder
Component Video / Progressive Scan
connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the Recorder’s
progressive scan output for the highest video resolution possible.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the Recorder to the corresponding in jacks on the TV using an optional Y Pb Pr
cable (C).
O
A
OPTICAL
DIGITAL INPUT
L
X
R
AUDIO INPUT
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
17
Downloaded From Disc-Player.com LG Manuals
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby
Digital™, MPEG 2, or DTS)
1. Connect one of the Recorder’s DIGITAL AUDIO
OUT jacks (OPTICAL O, COAXIAL X) to the corresponding in jack on your amplifier. Use an
optional digital (OPTICAL O, COAXIAL X) audio
cable.
2. You will need to activate the Recorder ’s digital
output. (See [Audio Settings] on page 22).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your Recorder (MPEG 2,
Dolby Digital and DTS). Check the receiver manual
and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Notes:
•
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a
strong, distorted sound or no sound at all.
•
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped
with a Digital Multi-channel decoder.
•
To see the audio format of the current DVD in the onscreen display, press AUDIO.
•
This Recorder does not perform internal (2 channel)
decoding of a DTS sound track. To enjoy DTS multi
channel surround, you must connect this Recorder to a
DTS compatible receiver via one of this Recorder’s digital audio outputs.
Rear of Recorder
Front of Recorder
Connecting a Digital Camcorder
Use a DV cable (not supplied) to connect the DV
in/out jack of your DV Digital Camcorder to the front
panel DV IN jack of this Recorder.
Note:
This jack is for connection to DV equipment only. It is
not compatible with digital satellite tuners or D-VHS
video decks.
DV Digital Camcorder
DV
IN/OUT
Accessory Audio/Video (A/V) Connections to
Recorder
Connect the AV 1 IN or AV 2 IN jacks on the
Recorder to the audio/video out jacks on your accessory component, using the optional audio/video
cables. (Refer to page 45 for [Recording from
External Components].)
Note:
If you use the S-VIDEO IN jack on the front panel,
the VIDEO IN jack on the front panel is not available.
18
Downloaded From Disc-Player.com LG Manuals
Front of Recorder
In this menu system, there are several ways to customize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings.
General Operation
1. Press SETUP and the Setup menu appears.
General Settings
Tuning Band Select
1. Select the [Tuning Band] option then press B .
2. Use v / V to select the tuning band (TV or
CATV) option then press ENTER.
TV: If you are using a standard antenna to receive
channels.
CATV: If you are using basic cable to receive
channels.
Hookup and
Settings
Initial Settings
2. Use v / V to select the desired option.
3. While the desired item is selected, press B to
move to the second level.
4. Use v / V to select the second desired option.
5. Press B to move to the third level.
6. Use v / V to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.
7. Press SETUP to exit the Setup menu.
Note:
Press b to go back to the previous level.
Auto Channel Set
Connect the Recorder to the desired type of antenna
or cable TV system as shown on page 16.
This Recorder is equipped with a frequency synthesized tuner capable of receiving up to 181 channels.
These include VHF channels 2-13, UHF channels 1469 and CATV channels 1-125.
1. Select the [Auto Channel Set] option.
2. Press B to move to the third level.
[Start] icon is highlighted.
3. Press ENTER to begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
Note:
After the Auto Channel Set proceeding is complete,
make sure the Tuning Band is set appropriately (TV
or CATV) on tuning band, follow steps 1~2 as shown
previous (Tuning Band Select) to choose the correct
Tuning Band (TV or CATV).
19
Downloaded From Disc-Player.com LG Manuals
To Add or Erase Channels from Memory
This feature allows you to add to or erase channels
from memory manually.
1. Select the [CH. Add/Del] option.
2. Press B to move to the third level.
[Edit] icon is highlighted.
3. Press ENTER and the Channel Edit menu
appears.
Note :
The Auto Clock Feature enables the Recorder to set up
the clock when the Recorder is turned off.
Manual
If your local TV station does not send date and
time information, or sends incorrect information,
you can set the clock manually.
4. Use v / V or number buttons to select a channel
to add or delete then press B.
[Add] or [Delete] icon is highlighted.
5. Press ENTER to confirm your setting.
6. Repeat steps 4-5 to add or erase additional
channels.
7. Press SETUP or RETURN (O) to exit the menu.
1. Enter the necessary information for year, date and
time.
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the current
cursor position.
2. Press ENTER to confirm your setting.
3. Press SETUP to exit the Setup menu.
Clock Set
1. Select the [Clock Set] option.
2. Press B to move to the third level.
Auto
The Auto option is set at the factory. In the Auto
option, the Recorder looks for a channel carrying
XDS (Extended Data Services) information. XDS
updates the clock using the Coordinated
Universal Time.
TV Aspect
4:3 Letter Box:
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
4:3 Pan Scan:
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Wide:
Select when a 16:9 wide TV is connected.
1. Use v / V to choose your Time Zone manually.
When Timezone is set to Auto, the Recorder will use
XDS information to determine the proper setting.
2. Use B to choose the [Daylight Savings] option.
Use v / V to choose Auto, On, or Off.
When it is set to Auto, the Recorder will use XDS
information to determine the proper setting.
3. Press ENTER to confirm your setting.
20
Downloaded From Disc-Player.com LG Manuals
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
[ON] :
1. Select the [Factory Setting] option.
2. Press B to select [SET] then press ENTER.
The Initialize menu will appear.
Using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks for connection to
a TV or monitor that is compatible with a
progressive scan signal.
Hookup and
Settings
[OFF] : Using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the Recorder to a standard (analog) television.
3. Select [Yes] and press ENTER.
Language Settings
Display Menu
Caution
Once the setting for Progressive Scan output is
entered, an image will only be visible on a
Progressive Scan compatible TV or monitor. If you
set Progressive Scan to [ON] in error, you must reset
the Recorder. First, remove the disc or tape in the
Recorder. Next, press STOP (x) and hold it for five
seconds before releasing it. The video output will be
restored to the standard setting, and a picture will
once again be visible on a conventional analog TV or
monitor.
Power Save Mode
Set Power Save Mode to [ON] to place your
Recorder into an economic power save mode.
Select a language for the Setup menu and information display.
Disc Menu / Audio / Subtitle
[Original] : Refers to the original language in
which the disc was recorded.
[Others] : To select another language, press
number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see p.
56). If you enter the wrong language code, press
CLEAR.
[OFF] (for Disc Subtitle) : Turn off Subtitle.
Factory Setting
You can reset the Recorder to its original factory
settings. Some options cannot be reset (Rating,
Password, Area Code).
21
Downloaded From Disc-Player.com LG Manuals
Audio Settings
Each DVD disc has a variety of audio output options.
Set the Recorder’s Audio Output according to the
type of audio system you use.
Dolby Digital / DTS / MPEG
[Bitstream]: Select [Bitstream] if you connect the
DVD+VCR’s DIGITAL AUDIO OUT jack to an
amplifier or other equipment with a Dolby Digital,
DTS or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will
be automatically downmixed to two-channel PCM
audio.
[OFF] (for DTS): If you select [Off], the DTS signal
is not output through the DIGITAL AUDIO OUT
jack.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). This allows
you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to [ON] for this effect.
Vocal
Set Vocal to [ON] only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
Sampling Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice
is made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is
made, this unit passes each type of signal through
without any further processing.
Check the documentation for your amplifier to verify
its capabilities.
22
Downloaded From Disc-Player.com LG Manuals
Rating
Some movies contain scenes that may not be suitable for children to view. Many of these discs contain
parental control information that applies to the complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
area. DVD video discs may or may not respond to
the parental control setting if the Area code of the
disc is set wrongly. Some discs offer more suitable
scenes as an alternative. Ratings are area dependent. The parental control feature allows you to block
access to scenes below the rating you input, thereby
preventing your children from being able to view
material you believe is unsuitable.
1. Select [Rating] option then press B.
2. To access the Rating, Password and Area Code
features, you must input the 4-digit security code
you created.
If you have not yet entered a security code you are
prompted to do so. Input a 4-digit code. Enter it
again to verify. If you make a mistake press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Set Password
You can enter or change password.
1. Select [Set Password] option then press B.
Hookup and
Settings
Lock (Parental Control) Settings
2. Follow step 2 as shown [Rating].
To change the password, select the [Change],
press ENTER and input the new 4-digit code.
Input it again to verify.
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password you can clear it using the
following steps:
1. Press SETUP to display the Setup menu.
[1]-[8] : Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
2. Input the 6-digit number [210499]. The message
appears, select [Yes] then press ENTER. The
security code is cleared.
[No Limit] : If you select [No Limit], parental
control is not active and the disc plays in full.
3. Enter a new code as described above.
Area Code
Enter the Area Code whose standards were used to
rate the DVD video disc, based on the list in the
reference chapter (see p. 56).
4. Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
5. Press OPEN/CLOSE (Z) to activate parental
control.
Note:
1. Select [Area Code] option then press B.
If you set a rating for the recorder, all disc scenes with the
same rating or lower are played. Higher rated scenes are
not played unless an alternate scene is available on the
disc. The alternative must have the same rating or a lower
one. If no suitable alternative is found, playback stops. You
must enter the 4-digit password or change the rating level in
order to play the disc.
2. Follow step 2 as shown [Rating].
3. Select the first character using v / V buttons.
4. Shift the cursor using B buttons and select the
second character using v / V buttons.
5. Press ENTER to confirm your area code
selection, then press SETUP to exit the menu.
23
Downloaded From Disc-Player.com LG Manuals
Recording Settings
Disc Record Mode
You can set the picture quality for recording;
XP (Excellent quality), SP (Standard quality), LP (Low
quality), EP (Extend quality).
Auto Chapter
During recording, chapter markers are added automatically at fixed intervals. You can set this interval to
5 minutes or 10 minutes. To turn off automatic chapter marking, select [None].
1. Select the [Disc Record Mode] option then press
B.
2. Use v / V to select a desired Disc Record Mode
(XP, SP, LP or EP).
Disc Settings
3. Press ENTER to confirm your selection, then
press SETUP to exit the menu.
Initialize
VCR Record Mode
You can set the picture quality for VCR recording;
SP (Standard Play), SLP (Super Long Play).
If you load a completely blank disc, the recorder will
initialize the disc.
•
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
•
DVD-RW: The Initialize menu will appear. Select [VR
Mode] or [Video Mode] then press ENTER.
•
DVD+RW/DVD+R(DL)/DVD-RAM: The Initialize menu
will appears. Select [Yes] then press ENTER.
Also, you can reformat the DVD-RW/DVD+RW/
DVD-RAM from the Setup menu as below.
DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV
IN jack. Some digital camcorders have two stereo
tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used. On the Audio 2 setting, the
overdubbed sound is used.
1. Select the [Initialize] option then press B.
[Start] icon is highlighted.
2. Press ENTER.
•
In case of DVD-RW, use b / B to select a
desired Disc Initialize Mode (VR Mode or Video
Mode) then press ENTER.
•
In case of DVD+RW/DVD-RAM, use b / B to
select [OK], and press ENTER.
It takes a few moments to format the disc.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
24
Downloaded From Disc-Player.com LG Manuals
Finalize
Disc Label
Finalizing ‘fixes’ the recordings in place so that the
disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
LIST/DISC MENU or TITLE.
Use the Disc Label feature to enter a name for the
disc. This name appears when you load the disc and
when you display disc information on-screen.
•
The Disc label can be up to 32 characters long.
•
For discs formatted on a different Recorder, you
will see only a limited character set.
Hookup and
Settings
Caution
Once you have finalized a DVD-R and DVD+R (DL)
disc, you cannot edit or record anything else on that
disc except DVD+RW. However, you can record and
edit a DVD-RW disc by choosing [Unfinalize] option.
1. Select the [Disc Label] option then press B.
[Edit] icon is highlighted.
1. Select the [Finalize] option then press B.
2. Press ENTER while [Finalize] is selected.
Finalize menu appears.
3. Select [OK] then press ENTER.
The Recorder starts finalizing the disc.
Notes:
•
Finalization can take up to 3-4 minutes or more depending on the type of disc, how much is recorded on the
disc, and the number of titles on the disc.
2. Press ENTER.
Keyboard menu appears.
To enter characters, see page 51.
Disc Protect
Depending on the type of disc you are using, Disc
Protect allows you to preserve your recordings in a
variety of ways:
•
DVD+RW : Prevents editing, erasing, or overwriting of existing recordings. Allows regular recording.
•
If you load a DVD-RW that has already been finalized,
you can ‘Unfinalize’ it by choosing [Unfinalize] from the
Finalize menu. After doing this, you can edit and rerecord onto the disc.
DVD+R : Prevents editing or erasing of existing
recordings. Allows regular recording.
•
DVD-RW (VR mode)/DVD-RAM : Prevents editing, erasing, and regular recording.
•
You cannot unfinalize a DVD-R and DVD+R (DL) disc.
Notes:
•
If [Disc Protect] option is set to [ON], the finalize is not
available. To finalize, set [Disc Protect] option to [OFF].
•
DVD+R DL disc can take up to 30 minutes to finalize.
Tips:
•
•
Disc Protect is not compatible with DVD-RW discs in
Video mode or DVD-R discs.
•
If you need to unlock a disc to make edits, select [OFF].
25
Downloaded From Disc-Player.com LG Manuals
PBC
DivX Registration Code
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
[ON]: Video CDs are played according to the PBC, if
available.
[OFF]: Video CDs are played the same way as Audio
CDs.
We provide you the DivX® VOD (Video On Demand
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more information, visit www.divx.com/vod.
AutoPlay
3. Use the registration code to purchase or rent the
videos from Divx® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.
When you load a DVD with AutoPlay turned on, the
Recorder will bypass the Disc menu and trailers and
start playing the movie automatically.
Set [AutoPlay] to [ON] or [OFF].
DivX
1. Select [About DivX(R)] option then press B.
2. Press ENTER while [Enter] is selected and the
registration code will appear.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
26
Downloaded From Disc-Player.com LG Manuals
General Explanation of
On-Screen Display
Some DVDs require specific operation or allow only
limited operation during playback. When this occurs,
is displayed, action prohibited or not available.
Displaying Disc Information on-screen
You can display various information about the disc or
tape loaded on-screen. Some items can be changed
using the menu.
1. Press DISPLAY once to show current status.
Example: DVD-RW in VR mode
Displaying Information While Watching TV
e.g., when DVD-RW in VR mode is inserted.
Indicates disc name and format.
Indicates the record mode,
free space, and elapsed time
progress bar.
Indicates channel
number and audio
input signal received
by the tuner.
Hookup and
Settings
While watching TV, press DISPLAY to display/
remove the information displayed on-screen.
2. Press DISPLAY once again to show various playback information.
The items displayed differ depending on the disc
type or playing status.
Indicates output audio signal.
Indicates current date and time.
Indicates operational mode of the recorder.
Changing TV Audio Channel
Some TV programs are broadcast with both a main
and a Secondary Audio Program (SAP). You can
change the TV audio.
Press AUDIO repeatedly to change the TV audio,
according to Broadcast audio signal as shown below.
•
•
•
•
STEREO+SAP Audio Signal
Stereo → SAP → Mono → Stereo
STEREO Audio Signal
Stereo → L → R → Mono → Stereo
SAP Audio Signal
Mono → SAP → Mono
MONO Audio Signal
Mono
The current audio channel is displayed
on-screen.
•
•
•
If SAP is selected, but there is no SAP channel
being broadcast, you will still hear the main audio
(Mono or Stereo) channel.
If the sound is poor quality when set to Stereo,
you can often improve it by changing to Mono.
When an external input is selected, the audio
channel can be switched only to Stereo.
3. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
For details about each item, see the pages in
parentheses.
[Title]: Current title (or track) number/total number of titles (or tracks) (page 29)
[Chapter]: Current chapter number/total number
of chapters (page 29)
[Time]: Elapsed playing time (page 30)
[Audio]: Selected audio language (DVD VIDEO
only) or audio channel (page 32)
[Subtitle]: Selected subtitle (page 31)
[Angle]: Selected angle/total number of angles
(page 31)
[Sound]: Selected sound mode (page 32)
Note:
If no button is pressed for 7 seconds, the on-screen display
disappears.
27
Downloaded From Disc-Player.com LG Manuals
Playback
VCR Tape Playback
Press VCR button to select the device to be operated.
Basic Instructions
1. Insert a pre-recorded video cassette.
The
indicator lights and the Recorder powers on automatically.
Search
This function lets you visually search for a tape section in either direction: forward and reverse. During
the high-speed picture search modes, the audio is
muted and horizontal lines (noise bars) appear. Also,
a short time is needed to stabilize the tape speed
when re-entering the PLAY mode so slight interference may be observed during this time.
To search:
2. If the
(TIMER) indicator in the display window
is lit press POWER once.
1. Press BACKWARD (m) or FORWARD (M)
during playback.
3. If a tape without a safety tab is inserted the unit
starts playback automatically.
If not, press N (PLAY).
2. To return to playback, press N (PLAY).
4. Press STOP (x) to stop playback. STOP appears
on the TV screen. If the tape reaches the end
before you press STOP (x) the Recorder automatically stops, rewinds and ejects the tape.
N o t e:
It is not necessary to select the tape speed for playback
because it is automatically selected by the Recorder. Also,
during playback the TV/VCR selector switches to VCR
mode automatically.
Note:
After 3 minutes in SEARCH mode the Recorder returns to
PLAY mode to protect the tape and video heads.
Still Picture and Frame-by-Frame Playback
1. Press PAUSE/STEP (X) during playback.
A still picture appears on the TV screen and the
audio is muted.
2. If the still picture vibrates vertically, stabilize it by
using CH/TRK (v/V) on the Remote Control.
Auto Tracking
3. Press PAUSE/STEP (X) repeatedly to advance
the video picture one frame at a time.
Automatic tracking adjusts the picture to remove
snow or streaks and beings when:
4. To return to playback, press N (PLAY).
•
A tape is played for the first time.
Note:
•
The tape speed (SP, LP, SLP) changes.
After 5 minutes in STILL mode the Recorder stops to protect
the tape and video heads.
•
Streaks or snow appear due to scratches on the
tape.
Manual Tracking
To manually adjust the tracking use the
CH/TRK (v/V) buttons on the Remote Control or
CH (v/V) on the front panel during playback.
Notes:
•
Vertical jitter requires a very fine adjustment.
•
Tracking is automatically reset to normal when the tape
is ejected or the power cord is unplugged for more than
3 seconds.
Slow Motion
During slow motion, audio is muted and horizontal
lines (noise bars) may appear on the TV screen. This
is normal.
1
While in still mode, press FORWARD (M). The
tape is played at a speed 1/19 times slower than
the normal speed.
2. Use CH/TRK (v/V) on the Remote Control if
necessary to adjust the tracking.
3. To return to the normal speed, press N (PLAY).
Note:
After 3 minutes in SLOW MOTION mode the Recorder goes
back to PLAY mode to protect the tape and video heads.
28
Downloaded From Disc-Player.com LG Manuals
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
1. Begin recording or playing a tape.
2. Press DISPLAY until the real-time counter is displayed on the TV screen.
3. At the point that you want to locate later, reset the
real-time counter to [0:00:00] by pressing CLEAR.
4. Continue to play or record.
5. Press STOP (x) when recording or playback
finishes.
3. To stop the playback, press STOP x.
The unit records the stopped point, depending on
the disc. “Xx” appears on the screen briefly.
Press N (PLAY) to resume playback (from the
scene point). If you press STOP x again or
unload the disc (“x” appears on the screen.), the
unit will clear the stopped point.
Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER (1), the disc tray closes automatically and unit turns off.
Notes:
•
6. Press RETURN (O). The tape automatically
stops when the tape counter returns to about
[0:00:00].
If parental control is set and the disc is not within the
rating settings you must input the password.
(See [Rating] on page 23).
•
DVDs may have a region code. Your Recorder will not
play discs that have a region code different from your
Recorder. The region code for this player is 1 (one).
S-VHS Quasi Playback (SQPB)
•
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be available on the Setup menu.
•
This Recorder can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
•
SQPB is an abbreviation for S-VHS Quasi
Playback.
Moving to another TITLE -RWVR
RAM
Playing a DVD or V ideo CD
Playback Setup
1. Press OPEN/CLOSE (Z) to open the disc tray.
Load your chosen disc in the tray, with the playback side down.
2. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press N (PLAY).
In some cases, the disc menu might appear
instead.
DVD
Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start.
Press TITLE or LIST/DISC MENU to return to the
menu screen.
VCD
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating procedures may differ. Follow the instructions on each
menu screen. You may also set PBC to [OFF]
(See page 26).
+RW
-R
+R
DVD
Playback
Counter Memory Function
-RWVideo
DivX
When a disc has more than one title, you can move
to another title:
Press DISPLAY twice then use v / V to select the
title icon. Then, press the appropriate numbered
button (0-9) or b / B to select a title number.
Moving to another CHAPTER / TRACK
-RWVR -RWVideo
DVD VCD
RAM
+RW
-R
+R
When a title on a disc has more than one chapter or
a disc has more than one track, you can move to
another chapter/track as follows:
•
Press SKIP (> or .) briefly during playback
to select the next chapter/track or to return to the
beginning of the current chapter/track.
•
Press SKIP (.) twice in quick successions to
step back to the previous chapter/track.
•
To go directly to any chapter/track during
playback, press DISPLAY twice and use v / V to
select the chapter or track (for Video CD) icon.
Input the chapter/track number or use b / B.
Note:
On a Video CD with PBC, you must set PBC to [OFF] in the
Setup menu to use this function (See page 26).
29
Downloaded From Disc-Player.com LG Manuals
Slow Motion -RWVR
-R
+R
DVD
-RWVideo
RAM
+RW
VCD
-R
1. Press BACKWARD (m) or FORWARD (M)
during pause mode.
2. Use the BACKWARD (m) or FORWARD (M)
to select the required speed:
DVD : 4 steps (forward and backward)
Video CD: 3 steps (forward only).
3. To exit Slow Motion mode, press N (PLAY).
Search -RWVR
+R
DVD
Marker Search -RWVR
-RWVideo
RAM
+RW
+R
DVD
-RWVideo
RAM
+RW
VCD
To enter a Marker
You can start playback from up to six memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to six
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH.
The marker search menu appears on the screen.
-R
VCD
1. Press BACKWARD (m) or FORWARD (M)
during playback.
2. Press BACKWARD (m) or FORWARD (M) to
select the required speed (forward and backward):
DVD ; 5 steps
Video CD ; 3 steps
3. To exit SEARCH mode, press N (PLAY).
Time Search -RWVR
-R
+R
DVD
-RWVideo
RAM
+RW
DivX
To start playing at any chosen time on the disc:
1. Press DISPLAY twice during playback. The time
search box shows the elapsed playing time.
2. Press v / V to select the time clock icon and
[-:--:--] appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press b / B to move the under
bar (_) to the wrong number. Then enter the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
2. Use b/B/v/V to select a marker scene that you
want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and use b / B
to select [Yes] then press ENTER to delete
marked scene from the list.
4. To remove the Marker Search menu,
press RETURN (O)
Random Karaoke DVD
VCD
1. Press RANDOM during playback.
The unit automatically begins Random Playback
and [RANDOM] appears on the TV screen.
2. Press RANDOM again to normal.
Tip:
By pressing SKIP (>) during Random playback,
the Recorder selects another title (track) and
resumes Random playback.
Notes:
30
Downloaded From Disc-Player.com LG Manuals
•
This function only works with DVD Karaoke discs or
video CDs without PBC.
•
On a Video CD with PBC, you must set PBC to [OFF] in
the setup menu to use the this function. See page 26.
-RWVR -RWVideo
DVD VCD
RAM
+RW
-R
+R
Repeat A-B
-RWVR -RWVideo
DVD VCD
RAM
+RW
-R
+R
1. Press PAUSE/STEP (X) during playback.
Advance the picture frame-by-frame by pressing
PAUSE/STEP (X) repeatedly.
To repeat a sequence during playback.
2. To exit still motion mode, press N (PLAY).
2. Press A-B again at your chosen end point.
[REPEAT A - B] appears briefly on the TV screen
and the repeat sequence begins.
Tips:
• You can advance or back up the picture
frame-by-frame by pressing b / B repeatedly
during PAUSE mode.
•
The picture frame-by-frame in reverse is not
available for Video CD.
Zoom
-RWVR
DVD
-RWVideo
RAM
+RW
-R
+R
Use zoom to enlarge the video image.
1. Press ZOOM during playback or still playback to
activate the Zoom function.
2. Each press of the ZOOM button changes the TV
screen in the sequence: X1 (normal size) → X2
size → X4 size → X1 (normal size)
3. Use the b B v V buttons to move through the
zoomed picture.
4. To resume normal playback, press ZOOM repeatedly or CLEAR button.
Note:
The Zoom function may not work on some DVDs.
Repeat
-RWVR -RWVideo
DVD VCD
1. Press A-B at your chosen starting point.
[REPEAT A - ] appears briefly on the TV screen.
3. Press A-B again to cancel.
Title Menu DVD
1. Press TITLE. If the current title has a menu, the
menu appears on the screen. Otherwise, the disc
menu may not appear.
2. The menu offers features such as camera angles,
spoken language and subtitle options, and chapters
for the title.
Playback
Still Picture and Frame-by-Frame Playback
Disc Menu DVD
1. Press LIST/DISC MENU and the disc menu is
displayed.
2. Press LIST/DISC MENU again to exit.
Camera Angle DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback. Press ANGLE then press
b / B repeatedly during playback to select a desired
angle. Note that the number of the current angle
appears on the display.
Tip:
RAM
+RW
-R
+R
Press REPEAT to select a desired repeat mode.
•
[CHAPTER] repeats the current chapter. (DVD
only)
•
[TITLE] repeats the current title. (DVD only)
•
[All] repeats the all titles/tracks. (Video CD,
DVD-RAM or VR mode DVD-RW only).
•
[TRACK]: repeats the current track. (Video CD
only)
•
[OFF] does not play repeatedly.
The Camera Angle icon is displayed on the TV screen when
alternate angles are available.
Subtitles DVD
DivX
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Note:
On a Video CD with PBC, you must set PBC to [OFF] on
the setup menu to use this function (See page 26).
31
Downloaded From Disc-Player.com LG Manuals
Changing the Audio Soundtrack DVD
Finding Locations on a Disc VCD
Press AUDIO then press b / B repeatedly during
playback to hear a different audio language or audio
soundtrack if available.
You can directly access any point on a video CD
using this function within 95% of progress bar.
Use this function only while a video CD is playing.
Playback jumps to the point specified.
Note:
Some discs feature both Dolby Digital and DTS
soundtracks. There is no analog audio output when
DTS is selected. To listen to the DTS soundtrack,
connect this recorder to a DTS decoder via one of
the digital outputs. See page 17 for connection
details.
Changing the Audio Channel
-RWVR
VCD
-RWVideo
RAM
+RW
-R
+R
Press AUDIO then press b / B repeatedly during
playback to hear a different audio channel.
With DVD-RW discs recorded in VR mode that have
both a main and a Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
3D Surround
-RWVR -RWVideo RAM
DVD VCD DivX
+RW
-R
+R
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1. Press DISPLAY twice then use v / V to select the
sound icon. Then, use b / B to select [3D SUR.].
2. To turn off the 3D Surround effect, select
[NORMAL].
Last Scene Memory DVD
This Recorder memorizes last scene from the last
disc that is viewed. The last scene remains in memory even if you remove the disc from the Recorder or
switch off the Recorder. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
Notes:
•
•
•
•
Settings are stored in memory for use any time.
This Recorder does not memorize settings of a disc if
you switch off the Recorder before commencing to play
it.
The Last Scene Memory function may not work on
some DVDs.
Last Scene Memory function for a previous DVD title is
erased once a different DVD title is played.
32
Downloaded From Disc-Player.com LG Manuals
1. Press SEARCH during playback.
The progress bar appears on the TV screen.
2. Use b / B to find the desired starting position for
playback.
3. Press ENTER to confirm the selected position.
Playback starts from the selected position.
Notes:
This function will not work if any bookmarks have
been set; see page 30.
Playing a DivX Movie File
Movie menu options
The Recorder can play Divx files on CD-R/RW or
DVD±R/RW discs. Before playing DivX files, read
“About DivX movie files” on page 34.
1. Press v / V to select a folder/file on the Movie
menu then press ENTER.
Movie menu options appear.
1. Use v / V to select a folder, and press ENTER
twice.
A list of files in the folder appears.
2. Use v / V to select a file then press N (PLAY).
Playback starts.
You can use variable playback functions. Refer to
pages 29-32.
2. Press v / V to select an option, and press
ENTER.
• [Play] Start playback the selected title.
• [Open] Opens the folder and a list of files in the
folder appears.
Playback
• [Dubbing] Dubs the DivX movie to VCR.
(page 44)
3. Press STOP (x) to stop the playback. The Movie
menu appears.
Note:
This recorder cannot play back the DivX file(s) in the
Memory card.
Notice for displaying the DivX subtitle
Please refer to following notice when the DivX
subtitle does not display properly.
1. Press SETUP.
The Setup menu appears.
2. Use v / V / b / B to select [LANGUAGE] b [Disc
Subtitle] then find a suitable language for the DivX
subtitle.
Refer to [Disc Menu/Audio/Subtitle] on page 21.
Tip:
If the subtitle still does not display properly after the
steps 1-2 proceeded, press and hold SUBTITLE
about 3 seconds then use b / B to select another
language code during playback until the subtitle is
displayed properly.
33
Downloaded From Disc-Player.com LG Manuals
About DivX movie files
DivX disc compatibility with this recorder is limited as follows:
Available resolution size of the DivX file is under
720x576 (W x H) pixel.
The file name of the DivX subtitle is limited to characters.
If there is impossible code to express in the DivX
file, it may be displayed as “_” mark on the display.
The total number of files and folders on the disc
are free but the total number of files and folders on
the folder should be less than 1999.
If the number of the screen frame is over 29.97
frames per second, this unit may not operate
normally.
If the video and audio structure of recorded file
is not interleaved, returns to the menu screen.
If the file is recorded with GMC, the unit supports only 1-point of the record level.
* GMC?
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX or Xvid, have this option.
There are different levels of GMC encoding, usually
called 1-point, 2-point, or 3-point GMC.
Playable DivX file
“.avi”, “.divx”
Playable DivX subtitle
“.smi”, “.srt (SubRip only)”,
“.sub (Micro DVD format only)”,
DivX subtitle except those listed above is not
displayed on the TV screen.
Playable Codec format
“DIV3”, “DIV4”, “MP43”, “DIVX”, “XVID”, “DX50”,
“DXSB”.
Playable Audio format
“AC3”, “PCM”, “MP2”, “MP3”, “WMA”, “DTS”.
Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
34
Downloaded From Disc-Player.com LG Manuals
Playing an Audio CD or
MP3/WMA files
Audio CD and Music menu options
1. Press v / V to select a track/file or folder on the
Audio CD or Music menu then press ENTER.
The Recorder can play Audio CDs and MP3/WMA
files on CD-ROM, CD-R/RW, DVD+R/RW,
DVD-R/RW, DVD-RAM discs or Memory Card.
Before playing MP3/WMA files, read [Notes on
MP3/WMA Recordings] on page 36.
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Use v / V to select a track then press N
(PLAY) and playback starts.
2. Use v / V to select an option, then press ENTER.
• [Play] Start playback the selected track or file.
• [Open] Opens the folder and a list of files in the
folder appears.
• [Program Add] Adds the track(s)/file(s) or
folder(s) to Program List. (page 37)
Playback
• [Delete] Deletes the file(s) or folder(s) from the
Memory Card.
MP3 / WMA
1. Use v / V to select a folder, and press ENTER
twice. A list of files in the folder appears.
2. Use v / V to select a track then press N (PLAY)
and Playback starts.
Audio CD and MP3/WMA file Features
Pause
1. Press PAUSE/STEP (X) during playback.
2. To return to playback, press N (PLAY) or press
PAUSE/STEP (X) again.
Moving to another Track
Tips:
•
You can view TV channel or video input source by
pressing RETURN (O). If you want to return to the
Music menu, press LIST/DISC MENU.
•
Press DISPLAY to view ID3-Tag information for the MP3
file. If ID3-Tag information is not present, [MP3 ID3 tag
:None] will appear. If you select a folder, the number of
subfolders and number of MP3/WMA files in the folder
are displayed. Press DISPLAY again to remove the
information screen.
• Press SKIP (> or .) briefly during playback
to go to the next track or to return to the beginning
of the current track.
• Press SKIP (.) twice in quick successions to
go back to the previous track.
• On an Audio CD, to go directly to any track, enter
the track number using the numbered buttons
(0-9)during playback.
Repeat
Press REPEAT to select a desired repeat mode.
•
On the Music menu, you can display the folders on the
disc. Use v V b B to select the “Folder” icon on the
Music menu then press ENTER twice.
• [TRACK]: Repeats the current track.
•
On CDs, DVDs or Memory Card with mixed content
(Audio tracks, MP3/WMA files, DivX files or JPEG files),
you can select among the Music menu, Movie menu
and Photo menu by pressing TITLE repeatedly.
• [FOLDER] (MP3/WMA): Repeats all the tracks on
a folder of a disc.
•
• [ALL] (CD): Repeats all the tracks on a disc.
• [OFF](No display): Does not play repeatedly.
If you are in a file list and want to return to the Folder
list, use the v/V to highlight
and press ENTER to
return to the previous menu screen.
35
Downloaded From Disc-Player.com LG Manuals
Changing the Audio Channel
Press AUDIO repeatedly to hear a different audio
channel (stereo, left or right).
Random
1. Press RANDOM during playback or in stop mode.
Random Playback begins immediately and
[RANDOM] appears on the menu screen.
2. To return to normal playback, press RANDOM
repeatedly until [RANDOM] disappears from the
menu screen.
Notes on MP3/WMA Recordings
MP3/WMA disc compatibility with this
unit is limited as follows:
•
•
•
•
Tip:
By pressing SKIP (. or >) during random playback, the
unit selects another track and resumes random playback.
•
•
Repeat A-B ACD
1. To repeat a sequence during disc playback.
Press A-B at your chosen starting point.
The Repeat icon and [A -] appear on the menu
screen.
2. Press A-B again at your chosen end point. The
Repeat icon and [A-B] appear on the menu
screen, and the sequence begins to play repeatedly.
3. Press A-B again to cancel.
Search ACD
1. Press BACKWARD (m) or FORWARD (M)
during playback.
2. Press BACKWARD (m) or FORWARD (M)
to select the required speed (3steps).
3. To exit SEARCH mode, press N (PLAY).
36
Downloaded From Disc-Player.com LG Manuals
•
Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48 kHz (WMA)
Bit rate: within 8 - 320 kbps (MP3),
32 - 192 kbps (WMA)
This unit cannot read an MP3/WMA file that
has a file extension other than “.mp3” /
“.wma”.
CD-R physical format should be “ISO 9660”
and “JOLIET”.
DVD±R/RW physical format should be “ISO
9660 (UDF Bridge format)”.
If you record MP3 / WMA files using software
that cannot create a file system (eg. DirectCD) it is impossible to playback MP3 / WMA
files. We recommend that you use Easy-CD
Creator, which creates an ISO 9660 file system.
The total number of files and folders on the
disc are free but the total number of files and
folders on the folder should be less than 1999.
This unit requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure
compatible playback.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
Program Playback with Audio
CD and MP3/WMA files
The program function enables you to store your
favourite tracks from any disc in the player memory.
Program can contain 99 tracks (Audio CD) or 256
tracks (MP3/WMA).
Program List menu options
1. Press v / V to select a track/file on the Program
List then press ENTER.
The menu options appear.
1. Use v / V to select a track/file or folder on the
List then press ENTER.
2. Use v / V to select [Program Add] option then
press ENTER.
3. Repeat steps 1-2 to place additional tracks on the
Program list.
2. Use v / V to select an option then press ENTER
to confirm your selection.
• [Play] Playback begins in the order in which
you programmed the tracks from the selected
track.
• [Move] Moves the track(s) to change the pro-
Playback
gram order.
• [Delete] Deletes the track(s) from the Program
List menu.
4. Audio CD : Use B to move to the Program list.
The programmed track you selected last is highlighted on the program list.
MP3/WMA : Go to next step.
5. Use v / V to select the track or file you want to
start playing.
6. Press N (PLAY) to start.
Playback begins in the order in which you programmed the tracks and [PRG] indicator appears
on the display window.
Playback stops after playing the last programmed
track on the program list.
Tips:
Repeat Programmed Tracks
Press REPEAT to select the desired Repeat mode.
[TRACK] Repeats the current track.
[ALL] Repeats all tracks on the Program List.
[OFF] Cancels Repeat mode (no display).
Erasing a Track from the Program List
1. Select the track you wish to erase from the
Program List.
Use MARKER button to select multiple tracks.
2. Press ENTER. The menu options appears.
3. Select [Delete] option then press ENTER.
•
Use the CLEAR button to select all tracks/files and folders, or cancel all marked tracks/files and folders.
•
Selecting multiple tracks/files or folders.
1. Press MARKER.
A check mark appears on the track/file or folder.
Press MARKER again to cancel the marked
track/file or folder.
2. Repeat step 1 to mark additional track/file (folders).
1. Select the track you wish to move on the Program
List. Use MARKER button to select multiple
tracks.
•
If you select folder for Programmed Playback, all tracks
in the folder are added to the program list.
•
You can access or remove the Program List screen by
pressing LIST/DISC MENU.
4. Use v / V to move the yellow bar to the desired
location, then press ENTER.
Changing Track Order in the Program List
2. Press ENTER. The menu options appears
3. Select [Move] option then press ENTER.
37
Downloaded From Disc-Player.com LG Manuals
V iewing a JPEG files
This unit can play JPEG files on CD-R/RW,
DVD+R/RW, DVD-R/RW, DVD-RAM discs or Memory
Card. Before playing JPEG recordings, read “About
JPEG image files” on page 39.
Photo menu options
1. Use v V b B to select a file then press ENTER.
The menu options appear.
1. Use v V b B to select a file or folder and press
ENTER.
2. Use v / V to select an option then press ENTER
to confirm your selection.
• [Open] Opens the folder and a list of files in the
folder appears.
2. Use v / V to select option and press ENTER.
• [Full Screen] Shows the selected file as full
screen.
• [Slide Show] Displays Slide Show menu.
Example: When you select a file.
• [Delete] Deletes the selected file(s) or folder(s)
3. Use v / V to select [Full Screen] then press
ENTER.
The selected image is displayed in full screen.
• [Copy] Copies the file(s) or folder to Memory
from the Memory Card.
Card.
Tip:
You can create new folder in the Memory Card.
Select [New Album] option then press ENTER.
[NONAME##] folder is created.
Still picture
Press ENTER to appear or disappear this menu.
Use PAUSE/STEP (X) while showing a picture to
pause mode.
4. To stop viewing at any time, press STOP.
Skip Images
Notes:
•
If the
icon displays in the Photo menu, it means you
cannot see those JPEG files.
•
You can view TV channel or video input source by
pressing RETURN (O). If you want to return to the
Photo menu, press LIST/DISC MENU.
•
If you are in a file list and want to return to the Folder
list, use the v/V to highlight
and press ENTER to
return to the previous menu screen.
•
On CDs, DVDs or Memory Card with mixed content
(Audio tracks, MP3/WMA files, DivX files or JPEG files),
you can select among the Music menu, Movie menu
and Photo menu by pressing TITLE repeatedly.
38
Downloaded From Disc-Player.com LG Manuals
While viewing a picture, press SKIP (> or .)
once to advance to the next file or return to the
previous file.
Rotate Images
Use v / V while viewing a picture to flip the picture
clockwise or counterclockwise.
About JPEG image files
1. Select [Slide Show] option on the Photo menu.
JPEG disc compatibility with this recorder is
limited as follows:
2. Press ENTER.
3. Use b / B / v / V to set the options.
[Object] option:
• [Selected] Views slide show only selected
files.
•
Depending upon the size and number of JPEG
files, it could take a long time for the recorder to
read the files. If you don’t see an on-screen display after several minutes, some of the files may
be too large — reduce the resolution of the JPEG
files to less than 4M pixels.
•
The total number of files and folders on the disc
are free but the total number of files and folders
on the folder should be less than 1999.
•
Some discs may be incompatible due to a different recording format or the condition of disc.
•
Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
•
If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
•
File names without “.jpg” extension will not be
able to be read by this recorder. Even though the
files are shown as JPEG image files in Windows
Explorer.
•
Progressive and lossless compression JPEG
image files are not supported.
• [All] Views slide show all files.
[Speed] option:
Sets the Slide Show speed to
[Normal], [Slow], or [Fast].
4. Select the [Start] option then press ENTER to start
the Slide Show.
5. Press STOP (x) to stop the Slide Show and
returns to the Photo menu.
Tips:
•
Use the CLEAR button to select all files, or cancel all
marked files.
•
Selecting multiple files
1. Press MARKER.
A check mark appears on the file. Press MARKER
again to cancel the marked file.
2. Repeat step 1 to mark additional file.
Playback
View Slide Shows
39
Downloaded From Disc-Player.com LG Manuals
Recording
About DVD recording
Notes for recording
Notes:
• This Recorder cannot record CD-R or CD-RW
discs.
•
The recording times shown are not exact
because the recorder uses variable bit-rate video
compression. This means that the exact recording time will depend on the material being recorded.
•
When recording a TV broadcast, if the reception
is poor or the picture contains interference, the
recording times may be shorter.
•
If you record still pictures or audio only, the
recording time may be longer.
•
The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
•
The recording time available may decrease if you
heavily edit a disc.
•
If using a DVD-RW disc, make sure you change
the recording format (Video mode or VR mode)
before you record anything on the disc. See page
24 (Initialize) for how to do this.
•
When using a DVD-R or DVD+R disc, you can
keep recording until the disc is full, or until you
finalize the disc. Before you start a recording
session, check the amount of recording time left
on the disc.
•
When using a DVD-RW disc in Video mode,
recording time available will only increase if you
erase the last title recorded on the disc.
•
The Delete Title option in the Title List (Original)
menu only hides the title, it does not actually
erase the title from the disc and increase the
recording time available (except for the last
recorded title on a DVD-RW disc in Video mode).
•
Overwrite recording is available using DVD+RW
discs.
•
When using a DVD+R/RW, the recorder will execute the Menu-making operation to update the new
title and editing when removing the disc from the
recorder.
•
•
Fingerprints and small scratches on a disc can
affect playback and/or recording performance.
Please take proper care of your discs.
The company does not hold any responsibility to
compensate the contents which should have
been recorded, and any losses or damages (e.g.
losses of business profit, or business intermission) that may arise from malfunction of this
recorder (not recording/editing as intended).
Disc types and recording formats, modes,
and settings
This recorder can play many different kinds of DVD
discs: pre-recorded DVD-Video discs, DVD-RW,
DVD-R, DVD+RW, DVD+R(DL) and DVD-RAM discs.
The disc format for DVD-R, DVD+R(DL), DVD+RW
discs is always “Video format”—the same as prerecorded DVD-Video discs. This means that once
finalized, you can play a DVD-R, DVD+R (DL), or
DVD+RW in a regular DVD player. The DVD-RAM
disc format is Video Recording (VR) format.
The DVD-RW disc format is Video Recording (VR)
format or Video format. You can change Recording
format, if required. (Reinitializing the disc will erase
the contents of the disc.)
The recording mode is closely related to the disc format. If the disc format is Video Recording format,
then the recording mode is VR mode; if the disc format is Video format, then the recording mode is
Video mode (except for DVD-Video, which is not
recordable, and so does not have a recording mode).
These can be changed as required for each recording and determine the picture quality and how much
space the recording will take up on the disc.
40
Downloaded From Disc-Player.com LG Manuals
Basic Recording from a TV
Instant T imer Recording
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc or tape is full or you stop the recording.
Instant Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
1. Switch on the Recorder, select the device (VCR
or DVD) for Recording and load a recordable disc
or tape. Also make sure that the TV input is set to
this recorder.
1. Follow steps 1-4 as shown left (Basic Recording
from a TV).
2. Press z REC repeatedly to select the recording
time length. Recording starts after the first press.
DVD: Each subsequent press increases the
recording time by 10 minutes.
VCR: Each subsequent press increases the
recording time by 30 minutes (maximum
540 minutes). Please confirm the VHS tape
has enough remaining time to be recorded
before recording.
DVD: XP, SP, LP, EP.
VCR: SP, SLP.
3. Select the TV channel to record.
4. Use AUDIO to select the audio channel to record.
The table below shows what will be recorded on
the different settings for different types of broadcast. The last column (Monitor Audio) shows what
you’ll hear as it is recording.
TV Broadcast Selected
Audio
MONO
MONO
STEREO
STEREO
Left
Right
MONO
MONO+SAP MONO
SAP
STEREO
STEREO
+SAP
SAP
MONO
Broadcast Audio
L Ch R Ch
MONO MONO
L
R
L
L
R
R
MONO MONO
MONO MONO
SAP
SAP
L
R
SAP
SAP
MONO MONO
Monitor
Audio
MONO
STEREO
Left
Right
MONO
MONO
SAP
STEREO
SAP
MONO
If you set the audio channel to SAP, but there is
no SAP channel being broadcast, the main audio
(mono or stereo) will be recorded.
5. Press z REC once to start recording.
The REC indicator lights in the display window.
Instant Timer Record Menu
Checking the Recording Time
Press z REC or DISPLAY once to check the recording time. The recalled setting will automatically return
to the TV screen for a moment.
Also, remaining time of recording is shown in the display window.
Recording
2. Set a recording mode as necessary by pressing
REC MODE repeatedly.
To Extend the Recording Time
The recording time can be extended anytime by
pressing z REC.
Each subsequent press increases the recording time
by 10 minutes (DVD) or 30 minutes (VCR).
6. Press STOP (x) to stop recording.
To Pause the Recording
Notes:
•
•
The maximum numbers of DVD titles are as show
below;
- DVD-R/RW, DVD-RAM : 99
- DVD+R(DL)/RW : 49
If the Recorder is powered off during DVD recording, the
recording will not be saved.
1. Press PAUSE/STEP (X) to pause the recording.
2. When you want to continue recording, press
PAUSE/STEP (X) or z REC.
Notes:
•
If you press PAUSE/STEP (X) during the Instant Timer
Recording, it will be canceled.
•
The Recorder will automatically power off when the
Instant Timer Recording ends.
•
If the unit is DVD mode when the VCR Instant timer
recording ends, the unit will not automatically power off.
41
Downloaded From Disc-Player.com LG Manuals
To record one TV program while
watching another
1. Press TV/VCR to select the TV mode during
recording. The TV indicator appears.
2. Using the TV, select the channel to be viewed.
Tip (VCR mode only)
Always use PAUSE/STEP (X) for best results when making
changes during recording .
For example: To change channels during recording, first
press PAUSE/STEP (X) to put the unit in pause mode.
Then select the desired channel on the Recorder, and press
PAUSE/STEP (X) again to resume recording.
T imer Recording
The Timer Recording function allows you to record up
to 8 programs within a period of one month.
3. Press ENTER to save the program.
The Timer Record List will appear.
4. Press RETURN (O) to exit the Timer Record
List.
Notes:
• The Timer indicator lights on the front panel display.
•
If the Disc and Tape indicator are blinking, either
no disc or tape is loaded, or the loaded disc is not
recordable.
•
The Recorder will record the audio according to
the current TV tuner setting (Stereo, Mono or
SAP). Use the AUDIO button to set the audio
before switching the Recorder to Standby mode.
•
The Recorder will automatically power off when
the Timer Recording ends.
•
If the unit is DVD mode when the VCR timer
recording ends, the unit will not automatically
power off.
•
There is a short delay when a timer recording finishes to confirm the recorded program. If two
timer recordings are set to record sequentially
(one right after the other), the very beginning of
the later program may not be recorded.
•
You must press STOP (x) to stop the Timer
Recording.
1. Press TIMER REC.
The Timer Record menu will appear.
Checking Timer Recording Details
•
[Media] – Choose a media (DVD or VCR).
•
[Ch.] – Choose a channel (2-69 or 1-125 for
antenna or cable channels respectively,
excluding skip channels), or one of the external inputs from which to record (AV1 or AV2).
•
[Date] – Choose a date up to 1 month in
advance, or select a daily or weekly program.
•
[Start Time] – Set the recording start time.
•
[End Time] – Set the recording end time.
•
[Mode] – Choose a record mode.
DVD: EP, LP, SP, XP, or AT (Auto)
VCR: SP, SLP, or AT (Auto)
Programming can be checked whenever the
Recorder is turned on. Press TIMER REC twice.
• Use v / V to select a timer recording.
• Press ENTER to edit the selected program.
Timer Record menu appears.
AT(Auto) mode determines how much time is available on the disc or tape and switches record mode,
if necessary, to complete recording the program.
2. Enter the necessary information for your timer
recording(s).
•
b / B (left/right) – Move the cursor left/right
•
v / V (up/down) – Change the setting at the
current cursor position
•
Press RETURN (O) to exit the Timer Record
menu.
•
Press TIMER REC to display Timer Record
List.
42
Downloaded From Disc-Player.com LG Manuals
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
• Use v / V to select a program you want to erase
on the Timer Recorder List, then press CLEAR
and select [Yes] than press ENTER.
Timer Recording Troubleshooting
Even though the timer is set, the recorder will not
record when:
Playing while you are
recording RAM
•
There is no disc (or tape) loaded.
•
A non-recordable disc (or tape) is loaded.
•
Disc Protect is set to ON in the Disc menu
(see page 26).
While recording (in DVD mode)
•
There are already 99 titles (DVD-RW, DVD-R,
DVD-RAM), 49 titles (DVD+RW, DVD+R(DL))
recorded on the disc.
1. Press N (PLAY).
Start play of the title you are recording.
You cannot enter a timer program when:
•
A recording is already underway.
•
The time you’re trying to set has already
passed.
•
There are already 8 timer programs set.
You can start play from the beginning of the title while
continuing to record it.
2. Press STOP (x) to return to the current recording
screen.
If two or more timer programs overlap:
•
The earlier program takes priority.
•
When the earlier program finishes, the later
program starts.
•
If two programs are set to start at exactly the
same time, the program entered first takes priority.
1. Press TIMESHIFT.
The PIP(Picture-In-Picture) window appears on
the screen as shown below. What is currently
being recorded appears as a PIP and you will
hear the playback audio.
Recording
If the disc is damaged, the recording may not
complete successfully. In this case even though the
Check field shows [Rec. OK], it may not be.
or
2. Press STOP (x) to return to the current recording
screen.
Notes:
•
Play cannot be started until at least 30 seconds after
recording starts.
•
This function does not work in VCR Recording mode.
43
Downloaded From Disc-Player.com LG Manuals
Dubbing from DVD to VCR
Dubbing from VCR to DVD
You can copy the contents of a DVD to a VHS tape
using the DUBBING (or DUB) button.
You can copy the contents of a VHS tape to a DVD
using the DUBBING (DUB) button. This allows you to
archive your old VHS tapes to DVD.
1. Insert a blank VHS videotape into the VCR deck.
2. Insert the disc you wish to copy in the DVD deck
and close the disc tray.
1. Insert a blank DVD disc in the DVD deck and
close the disc tray.
3. Find the place on the DVD (or Disc) from which
you want to start dubbing using the PLAY, FF,
REW and PAUSE functions.
For best results, pause playback at the point from
which you want to record.
2. Insert the VHS video tape you wish to copy into
the VCR deck.
4. Press the DUBBING button on the Remote
Control or DUB on the front panel.
The Dubbing menu appears.
3. Find the place on the VHS tape from which you
want to start dubbing using the PLAY, FF, REW
and PAUSE functions. For best results, pause
playback at the point from which you want to
record.
4. Press the DUBBING button on the Remote
Control or DUB on the front panel.
The Dubbing menu appears.
5. Use v / V / b / B to select the desired Record
Mode: SP or SLP (3 times SP).
6. Select [Dubbing] then press ENTER or DUBBING
to start copying.
7. To stop dubbing at any other time,
press STOP (x).
You must stop the dubbing process manually
when the DVD movie ends, or the unit may replay
and record over and over again.
Note:
If the DVD (or Discs) you are attempting to copy is
copy protected, you will not be able to copy the disc.
It is not permitted to copy Macrovision encoded
DVDs (or Discs). [Copy-protected. Cannot record.] is
displayed on the TV screen.
Tip:
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
[DUB] indicator blinks on the front panel display.
While in Pause mode, you can adjust the DVD playback position using PLAY, REW, FF, PAUSE/STEP,
etc. The VCR deck will remain in Pause mode. To
resume Dubbing, press the DUBBING button twice.
44
Downloaded From Disc-Player.com LG Manuals
5. Use v / V / b / B to select the desired Record
Mode: EP, LP, SP or XP.
6. Select [Dubbing] then press ENTER or DUBBING
to start copying.
7. To stop dubbing at any other time,
press STOP (x).
Dubbing will stop automatically when the VHS
tape ends.
Note:
If the VHS video tape you are attempting to copy is
copy protected, you will not be able to copy the tape.
It is not permitted to copy Macrovision encoded
tapes.
Tip:
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
[DUB] indicator blinks on the front panel display.
While in Pause mode, you can adjust the VCR playback position using PLAY, REW, FF, PAUSE/STEP,
etc. The DVD deck will remain in Pause mode. To
resume Dubbing, press the DUBBING button twice.
Recording from External
Components
You can record from an external component, such as
a camcorder or VCR, connected to any of the
Recorder’s external inputs.
1. Make sure that the component you want to record
from is connected properly to the Recorder. See
page 18.
2. Press INPUT repeatedly to select the external
input to record from.
•
AV1: Audio/Video Input mounted on back
panel.
•
AV2: Audio/Video Input mounted on front
panel.
•
DV: DV Input mounted on front panel.
Additional Information
Simultaneous Play and Record
You can play or record a DVD during the VCR playback, press DVD to change DVD mode and perform
the DVD playback or recording.
Notes:
• You cannot play or record both DVD and VCR at
the same time.
•
You can not change VCR mode during the DVD
recording mode.
•
If you wish VCR playback or record during the
DVD playback, press VCR to change VCR mode
and perform the VCR playback or recording.
3. Load a recordable disc or tape.
4. Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: XP, SP, LP or EP.
VCR: SP or SLP
5. Press z REC once to start recording.
The REC indicator lights in the display window.
6. Press STOP (x) to stop recording.
Notes:
Check that the Audio In settings DV Record Audio
are as you want them. See page 24.
•
If your source is copy-protected using
CopyGuard, you will not be able to record it using
this recorder. See Copyright on page 9 for more
details.
•
Recording continues until you press STOP (x) or
the disc is full.
•
To record for a fixed length of time, see [Instant
Timer Recording] on page 41.
Recording
•
45
Downloaded From Disc-Player.com LG Manuals
Recording from DV Input
1. Make sure your digital camcorder is connected to
the front panel DV IN jack. See page 18.
Before DV dubbing
2. Check that the DV audio input is as you require.
You can choose between Audio 1 (original audio)
and Audio 2 (overdubbed audio).
You can connect a DV-equipped camcorder to this
recorder using a single DV cable for input and output
of audio, video, data and control signals.
This recorder is only compatible with DV-format
(DVC-SD, DV25) camcorders. Digital satellite
tuners and Digital VHS video recorders are not
compatible.
You cannot connect more than one DV camcorder
at a time to this recorder.
You cannot control this recorder from external
equipment connected via the DV IN jack (including
two recorders).
It may not always be possible to control the connected camcorder via the DV IN jack.
Digital camcorders can usually record audio as
stereo 16-bit/48kHz, or twin stereo tracks of 12bit/32kHz. This recorder can only record one stereo
audio track. Set [DV Record Audio] option to Audio
1 or Audio 2 as required (see page 24).
Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
Picture disturbance on the recording may occur if
the source component pauses playback or plays an
unrecorded section of tape, or if the power fails in
the source component, or the DV cable becomes
disconnected.
Recording from a Digital Camcorder
You can record from a digital camcorder connected to
the DV IN jack on the front panel of this recorder.
Using the recorder’s remote, you can control both the
camcorder and this recorder.
Before recording, make sure that the audio input for
the DV IN jack is set up (see page 24).
Tips:
• The source signal must be DVC-SD format.
• Some camcorders cannot be controlled using this
recorder’s remote.
• If you connect a second recorder using a DV
cable, you cannot control the second DVD from
this one.
• You cannot control this unit remotely from a component connected to the DV IN jack.
• You cannot record date and time information from
a DV cassette.
46
Downloaded From Disc-Player.com LG Manuals
DV Input is set from the DV Record Audio in
sub-menu of the Setup menu. See [DV Record
Audio] on page 24 for more information.
3. Press INPUT repeatedly to select the DV input.
DV appears in the display window and on the TV
screen.
4. Find the place on the camcorder tape that you
want to the recording to start from.
For best results, pause playback at the point from
which you want to record.
Depending on your camcorder, you can use
this recorder’s remote to control the camcorder
using the STOP, PLAY, BACKWARD, FORWARD and PAUSE functions.
5. Press z REC once to start recording.
Recording is automatically stopped if the
recorder detects no signal.
You can pause or stop the recording by pressing PAUSE/STEP (X) or STOP (x).
You cannot control the camcorder from this
Remote Control during recording.
In Video mode, the final frame of the recording
may remain displayed on screen for a while
after recording stops.
Troubleshooting
If you cannot get a picture and/or audio through the
DV IN jack, check the bullet points:
Make sure the DV cable is properly connected.
Try switching off the connected equipment then
switch back on.
Try switching the audio input.
Note:
Depending on the connected camcorder, you may not
be able to control it using the Remote Control supplied
with this recorder.
Editing
T itle List and Chapter List
Menu Overview
123
4
5
67
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD,
and whether you’re editing Original content, or a
Playlist.
There are two ways to edit VR mode DVD-RW discs.
You can directly edit the Original content of the disc,
or you can create and edit a Playlist. The Playlist
doesn’t actually change any of the content on the
disc, but just controls how the content is played back.
When selecting titles, use the v / V buttons to
display the previous/next page if there are more
than six titles.
If you are editing a VR mode disc, press
LIST/DISC MENU to switch between Original
and Playlist menu.
On the left side of the screen are the menu
options. The main part of the screen shows
thumbnails of the titles (or chapter) on the DVD.
You can change these thumbnails using the
THUMBNAIL button. (see [Changing Title
Thumbnails] on page 48.)
Press DISPLAY to display the information of
selected title on the Title List menu.
After selecting a title or chapter on the Title List
of Chapter List menu, then press ENTER. The
menu options on the left side of the menu. Use
v / V to select a option then press ENTER to
confirm your selection.
2. To exit the Title List menu, press RETURN (O)
repeatedly.
1. Menu options: To display menu option, select a
title or chapter then press ENTER. The options
displayed differ depending on the disc type.
• [Play] Start playback of the selected title or chapter.
The hidden titles and chapters on the DVD+R/RW
cannot be play back.
• [Search]
- [Chapter] ; Displays Chapter List of the Title.
- [Time] ; Search time for you want start point
of the title .
• [Delete] Deletes the title or chapter. (page 50)
• [Move] Moves chapter position on [Chapter List Playlist] menu (page 53).
• [Protect] Protects accidental recording, editing or
deleting of the title.(page 53)
• [Edit] Edits or Deletes a part of the title.
- [Title Name] Edits the title name. (page 51).
- [Delete Part] Deletes a part of the Title (page 50).
- [Divide] Divides a title into two (page 52).
- [Hide (Show)] Hides (or Shows) the selected title or
chapter. (page 53)
• [Playlist Add] Adds the title or chapter to the Playlist.
(page 49)
• [Dubbing] Dubs the title to VCR.
• [Title] Displays Title List of the chapter.
• [Combine] Combines two titles or chapters into one
(page 52).
• [Full Play] Starts playback of the selected title including the hidden chapters.
Editting
1. Press LIST/DISC MENU to display the Title List
menu.
Playback should be stopped when you do this.
2. Indicates the record mode, free space, and
elapsed time progress bar.
3. Current media.
4. Currently selected title.
5. Thumbnail.
6. Shows the selected title number and total number
of titles.
7. Shows the title name, recorded date, and recording length.
47
Downloaded From Disc-Player.com LG Manuals
VR Mode: Original and
Playlist Editing
Titles, Chapters and Parts
Titles in the disc’s original content contain one or
more chapters. When you insert a disc’s title into the
Playlist, all the chapters within that title also appear.
In other words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are
sections of Original or Playlist titles. From the Original
and Playlist menu you can add or delete parts.
Adding a chapter or title to the Playlist creates a new
title made up of a section (ie., chapter) of an Original
title. Deleting a part removes part of a title from the
Original or Playlist menu.
Caution
When editing using the Delete, Add and Move functions, the start and end frames may not be exactly
as set in the start and end point display.
During Playlist playback, you may notice a momentary pause between edits. This is not a malfunction.
Is editing a DVD like editing a video tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record
the edits. With DVD, you edit by making a ‘Playlist’ of
what to play and when to play it. On playback, the
Recorder plays the disc according to the Playlist.
About word ‘Original’ and ‘Playlist’
-RWVR
RAM
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
Original: content refers to what’s actually recorded
on the disc.
Playlist: content refers to the edited version of the
disc — how the Original content is to be played.
48
Downloaded From Disc-Player.com LG Manuals
Adding Chapter Markers
-RWVR
+RW
+R
RAM
You can create chapters within a title by inserting
chapter marks at the desired points.
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see [Auto Chapter] on page 24).
During recording or playing back, at the point you
want to start a new chapter, press CHP ADD.
A chapter marker icon appears on the TV screen.
Changing T itle Thumbnails
-RWVR
+RW
+R
RAM
Each title displayed in the Title List menu is represented by a thumbnail picture taken from the start of
that title or chapter.
If you prefer, select a different still picture from within
a title.
Press THUMBNAIL to make the currently displayed
picture the one that appears in the Title List menu.
The still picture that you choose appears in both the
Original or Playlist menu.
Tip:
You can also change the thumbnail picture of the title
on the Chapter List menu. Select a chapter on the
Chapter List menu then press THUMBNAIL. The
thumbnail picture of the title that includes the chapter
is changed.
Making a New Playlist
-RWVR
RAM
Use this function to add an Original title or chapter to
the Playlist. When you do this, the whole title is put
into the Playlist (you can delete bits you don’t need
later - see [Deleting an Original or Playlist title/chapter] on page 50).
The title appears in the Playlist complete with the
chapter markers that appear in the Original. However,
if you add more chapter markers to the Original later,
these are not automatically copied over into the
Playlist title.
Adding Additional T itle /
Chapters to the Playlist
-RWVR
RAM
You can add an Original title or chapter to add to a
Playlist title even if it is already registered.
1. Choose a title or chapter on the [Title List-Original]
menu or [Chapter List-Original] menu to put into
the Playlist, then press ENTER.
The menu options appears on the left side of the
screen.
1. Choose a title or chapter on the [Title List-Original]
menu or [Chapter List-Original] menu to put into
the Playlist, then press ENTER.
The menu options appears on the left side of the
menu.
2. Use v / V to select [Playlist Add] from menu
options then press ENTER.
2. Use v / V to select [Playlist Add] option then
press ENTER.
3. Choose a Title List-Playlist that is already registered to insert a title or chapter, then press
ENTER.
Editting
4. Repeat steps 1-3 to add additional title or chapter
on the Playlist.
You can view the added chapters on the [Chapter
List-Playlist] menu.
3. Select [New Playlist] then press ENTER.
The new title appears in the updated Playlist. All
chapters of the title are added to the Playlist.
5. Press RETURN (O) to exit, or LIST/DISC MENU
to go back to the [Title List-Original] menu.
49
Downloaded From Disc-Player.com LG Manuals
Deleting an Original or
Playlist T itle/Chapter
When you erase a title or chapter from the Playlist
menu, you only remove it from the Playlist; the
title/chapter remains in the Original menu.
If you choose to delete a title or chapter from the
Original (title/chapter) menu, the title or chapter is
actually deleted from the disc and the remaining time
available for recording increases. Titles/chapters
deleted from the Original are also removed from the
Playlist.
Deleting a Part
-RWVR
RAM
You can delete a part which you do not want in the
title.
1. Use b / B / v / V to choose a title you want to
delete on the Title List menu then press ENTER.
The options appears on the left side of the menu.
2. Select [Delete Part] option then press ENTER.
[Title Edit (Delete Part)] menu appears on the TV
screen.
[Start Point] icon is highlighted.
Example: Title Edit (Delete Part) (DVD-VR)
Note:
It may not be possible to delete chapters that are less
than 5 seconds long.
1. Use b / B / v / V to choose a chapter or title you
want to delete on the [Title List] or [Chapter List]
menu then press ENTER.
The menu options appears on the left side of the
screen.
2. Select [Delete] option from the options on the
menu.
Example: Title List (DVD-VR)
3. Starts playback and use pause step, search and
slow-motion to find the starting point.
4. Press ENTER at the starting point of the section
you want to delete.
[End Point] icon is highlighted.
The part is indicated on the Progress Bar.
5. Use pause step, search and slow-motion to find
the ending point.
6. Press ENTER at the ending point of the section
you want to delete.
You can cancel the selected point, use v / V to
select [Cancel] icon then press ENTER.
3. Press ENTER to confirm.
The confirm message for deleting will appear.
4. Use b / B to select [Yes] then press ENTER.
The selected chapter or title is deleted.
After pressing ENTER, the new, updated menu is
displayed.
7. If you finish to edit, select [Done] icon then press
ENTER.
The confirm message for deleting will appear.
Use b / B to select [Yes] then press ENTER.
The selected part is deleted from the title and Title
List menu appears.
5. Repeat steps 1 - 4 to continue to delete from the
menu.
Notes:
6. Press RETURN (O) repeatedly to exit the menu.
•
It may not be possible to delete parts that are less than
3 seconds long.
•
If you select [Cancel] then press ENTER, the Recorder
will go to previous option and into Pause mode.
Notes:
When DVD+RW recording, the deleted title’s
name is changed to [Deleted Title].
•
•
If more than two titles are repeatedly deleted, the
titles are combined into one.
•
When you are deleting a title or chapter, only the
last one on DVD+R/RW increases remaining
recording time.
50
Downloaded From Disc-Player.com LG Manuals
Naming a T itle
4. Choose [OK] then press ENTER to fix the name
and return to the previous menu screen.
You can name Original and Playlist titles independently.
5. Press RETURN (O) repeatedly to exit the menu.
1. Choose the title you want to name on the Title List
menu, then press ENTER.
The menu options appears on the left side of the
menu.
Notes:
• Names can be up to 32 characters long.
2. Use v/V to select [Title Name] option then press
ENTER.
Keyboard menu appears.
•
For discs formatted on a different recorder, you
will see only a limited character set.
•
When recording on DVD-R, DVD+R or DVD+RW
discs, the entered name is displayed on the DVD
player only after finalization.
T ime Search
You can select start point of the title.
1. Use b / B / v / V to choose a title on the Title List
menu then press ENTER.
The options appears on the left side of the menu.
2. Select [Time] option then press ENTER.
3. Enter a name for the title. Use b / B / v / V to
select a character then press ENTER to confirm
your selection.
•
Language : Selects a keyboard type.
•
Space: Inserts a space at the cursor position.
•
Delete: Deletes the character to the left of the
cursor position.
•
•
b / B: Moves the cursor left or right.
OK: Confirms the name you have entered.
•
Cancel: Deletes all characters and exits the
Keyboard menu.
Example: Title List (DVD-VR)
3. Press ENTER.
[Time Search] menu appears on the TV screen.
Remote control buttons for entering a name
N (PLAY): Inserts a space at the cursor position.
•
PAUSE/STEP (X): Deletes the character to
the right of the cursor position.
•
SKIP (. / >): Moves the cursor left or
right.
•
STOP (x), CLEAR: Deletes the character to
the left of the cursor position.
•
0-9: Enters the character corresponding to the
selected column.
•
LIST/DISC MENU, DISPLAY: Switches the
keyboard type (English/Latin Capital,
English/Latin Lowercase, Symbol)
Current picture
Editting
•
End time
Start time
Seleted time
Selected point
4. Use b / B to find the point you want to start.
The point increase 1 minute step.
If you press and hold b / B then the point
increase 5 minute step.
5. Press ENTER to start seleted point.
51
Downloaded From Disc-Player.com LG Manuals
Divide One T itle Into Two
+RW
Combining Two Chapters
Into One -RWVR +RW +R RAM
Use this command to split a title up into two new
titles.
Use this function to combine two adjacent chapters
into one.
1. On the Title List menu, select a title you want to
divide then press ENTER.
The menu options appears on the left side of the
screen.
1. On the Chapter List menu, select the second
chapter of the two chapters you want to combine
then press ENTER
The menu options appears on the left side of the
screen.
2. Select [Divide] option.
2. Use v / V to select [Combine] option.
The combine indicator appears between the two
chapters you want to combine.
Example: Title List (DVD+RW)
Example: Title List (DVD+RW)
3. Press ENTER.
[Title Edit (Divide)] menu appears. [Divide] option
is highlighted.
Current picture
The first title’s
thumbnail
3. Repeat steps 1 - 2 to continue to combine from
the menu.
4. Press RETURN ( O) repeatedly to exit the
menu.
Notes:
This function cannot operate listed as below;
The second
title’s thumbnail
4. Use play, pause step, search and slow-motion to
find the point you want to divide the title.
5. Select [Divide] option then press ENTER at the
point.
To reset the point, select [Cancel] option then
press ENTER. Repeat from step 3.
6. Choose [Done] option then press ENTER to fix
the dividing point.
The title is divided into two new titles. It take up to
4 minutes to divide.
Note:
You cannot select dividing point less than 3 seconds.
52
Downloaded From Disc-Player.com LG Manuals
•
If there is only one chapter within the title.
•
If you select first chapter.
•
If two chapters created by erasing a part from an
original title.
•
If two chapters created from different titles.
•
If two chapters created by moving an order from an
original title.
Moving a Playlist Chapter
-RWVR
Use this function to re-arrange the playing order of
Playlist chapters on the Chapter List-Playlist menu.
Note:
This function is not available if there is only one
chapter.
1. Select a chapter on the Chapter List-Playlist
menu.
2. Press ENTER.
The menu options appears on the left side of the
menu.
3. Use v / V to select [Move] option from Playlist
options then press ENTER.
Tip:
If you select a hidden chapter or title on the Title List
or Chapter List menu, you can ‘show’ it by choosing
[Show] option on the menu. After doing that, you are
able to see the chapter or title.
Protect a T itle
+RW
+R
-RWVR
RAM
Use this function to protect against accidental recording, editing or deleting of the title.
1. Press LIST/DISC MENU to display the [Title List]
menu.
2. Use v V b B to choose a title you want to protect
then press ENTER.
Options appear on the left side of the screen.
3. Select [Protect] from the options.
Example: Title List (DVD+RW)
4. Use b / B / v / V to choose the place you want to
move the chapter then press ENTER.
After pressing ENTER, the updated menu is displayed.
+RW
+R
You can skip playing chapters or titles without deleting from the disc.
1. Use v V b B to choose a chapter or title you
want to hide on the [Title List] or [Chapter List]
menu, then press ENTER.
Options appear on the left side of the screen.
Tip:
If you select a title that has already been protected
on the Title List menu, you can ‘unprotect’ it by
choosing [Unprotect] option from the Title List menu
options. After doing that, you can edit and delete the
title.
Editting
Hide a Chapter/T itle
4. Press ENTER to confirm.
The lock mark will appears on the title’s
thumbnail.
2. Select [Hide] option.
Example: Title List (DVD+RW)
3. Press ENTER to confirm.
The chapter’s or title’s thumbnail will dim.
53
Downloaded From Disc-Player.com LG Manuals
Overwriting Recording
+RW
2. Press TITLE in Play mode or DVD tuner mode.
Title List menu will appear as shown below.
To overwrite a new video recording on a previously
recorded title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
1. Select input source you want to record (TV channel, AV1-2, DV).
2. Press LIST/DISC MENU to display the Title List
menu.
3. To play back a title, select the title you want then
press ENTER or N (PLAY).
Tip:
You can remove the Title List menu by pressing
STOP (x).
3. Use v V b B to choose a title you want to overwrite.
4. Press z REC to start overwrite recording.
Overwrite recording starts from the start point of
the title.
5. Press STOP (x) to stop the overwrite recording.
The new title is created and updated menu is displayed.
Notes:
• This function is not available for a protected title.
•
If the overwrite is longer than the recording
length of the current title, the next title is overwritten. But if next title is protected, the overwriting stops at the starting point of the title.
•
If the selected title’s recording length is less than
10 seconds, the next title is overwritten. But if the
next title is protected, overwriting stops.
V iewing T itle List menu
displayed on other DVD
Recorders or Players
+RW
+R
You can view the Title List menu displayed on the
other DVD player that is capable of playing DVD+RW
or DVD+R discs.
Playing Your Recordings on
Other DVD Players
(Finalizing a Disc)
Most regular DVD players can play finalized discs
recorded in Video mode, finalized DVD+R or
DVD+RWs. A small number of players can also play
DVD-RW discs recorded in VR mode, finalized or not.
Check the manual that came with the other player to
check what formats of discs it will play.
Finalizing ‘fixes’ the recordings and editings in place
so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM
drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. The menu can be accessed
by pressing LIST/DISC MENU or TITLE.
To finalize a disc, refer to [Finalize] on page 25.
Notes:
• Unfinalized DVD+RW is playable on regular DVD
players.
•
The edited contents of a DVD+RW (DL) disc is
compatible on regular DVD players only after
finalization.
•
Any edited contents of the DVD+R disc are not
compatible on regular DVD players.
(Hide, chapter combine, added chapter mark, etc.)
•
How long finalization takes depends on the type
of disc, how much is recorded on the disc, and
the number of titles on the disc.
•
DVD+R DL disc can take up to 30 minutes to
finalize.
1. Insert DVD+R or DVD+RW disc recorded already.
54
Downloaded From Disc-Player.com LG Manuals
Reference
Controlling Your TV with the
Supplied Remote
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
You can control your TV using the buttons below.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Manufacturer
Code Number
Manufacturer
ADMIRAL
16,33,37,44,45
MONTGOMERY
AIWA
70
WARD
23,24,32,33,34
AKAI
01
NEC
01,08
AMARK
09
NOBLEX
07
AOC
01
PACKARD BELL
43
BELL & HOWELL
POWER
INPUT
You can
Turn the TV on or off.
Switch the TV’s input source
between the TV and other input
sources.
CH +/–
Scans up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV.
MUTE
Turns on or off TV sound.
Note:
Depending on the unit being connected, you may not be
able to control your TV using some of the buttons.
01,06,08,09
33
PANASONIC
07,11,13,25,35,36
BROKSONIC
18,19
PHILCO
01,06,07,08,09,
CANDLE
51
CCE
07
PHILIPS
06,07,43,61,62,65
CENTURION
08
PIONEER
CINERAL
43
PORTLAND
09
CITIZEN
49,50,51,52,53,54,55
PROSCAN
03,37,44
CORONADO
09
QUASAR
11,13
CROWN
09
RADIO SHACK
16,17,23
CURTIS MATHES
01,03,08,33,35,37,44
RCA
01,03,37,44,69
DAEWOO
By pressing
Code Number
15,38,43,58
30
16,38,39,40,41,42,43
REALISTIC
DAYTRON
01,08
SAMPO
08
EMERSON
01,09,16,17,18,19
SAMSUNG
01,08,09,25,68
16,17,23
FISHER
28,29
SANYO
28,29
FUNAI
46,47
SCOTT
01,08
GENERAL ELECTRIC
03,10,11,13,37,44
SEARS
09,25,26,27,28,29
GRADIENTE
01,56,57,63,67
SEMP
64
HITACHI
09,14,15,43
SHARP
09,22,23,24,60,66
JC PENNEY
01,08,10,27,35
SIGNATURE 2000
01,06,08,09,10,
JVC
20,21,63,67
23,24,33,34
KIOTE
43
SONY
12,62
KMC
09
SOUNDESIGN
51
KTV
01,08,09,31
SYLVANIA
01,04,05,06,07,
LG (GOLDSTAR)
01,07,08,09,35,39,40
LODGENET
33
SYMPHONIC
LOGIK
33
TATUNG
11
LXI
09,24,25,26,27,28,29
TEKNIKA
07,09,16,33,51
MAGNAVOX
01,02,04,05,06,
TELERENT
09,33
07,08,09,20,
THOMSON
69
08,35,51
46,47
34,35,43,51,61,62,65
YORX
08
MAJESTIC
33
TOSHIBA
01,25,26,27,64
MARANTZ
01,32
WARDS
01,06,08,09,10,33,34
MEMOREX
33
XR1000
48
MGA/MITSUBISHI
01,08,32,34
ZENITH
01, 02,33,59
Notes:
•
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
•
If you enter a new code number, the code number previously entered will be erased.
•
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting. Set the appropriate code number again.
Controlling other TVs with the
remote
Reference
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code.
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (Refer to table on the right column).
2. Release TV POWER button.
55
Downloaded From Disc-Player.com LG Manuals
Language Code List
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Code List
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
56
Downloaded From Disc-Player.com LG Manuals
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Code
ET
FJ
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
Area
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
No power.
The power cord is disconnected.
Plug the power cord into the wall outlet securely.
No picture.
The TV is not set to receive Recorder
signal output.
Select the appropriate video input
mode on the TV so the picture from
the Recorder appears on the TV
screen.
The video cable is not connected
securely.
Connect the video cable into the jacks
securely.
The Progressive Scan is set to [ON] on
the setup menu but is connected to a
standard(analog) television with component video input.
Set Progressive Scan to [OFF]
(see page 21).
Wrong connection.
Check the connection.
The equipment connected with the
audio cable is not set to receive
Recorder signal output.
Select the correct input mode of the
audio receiver so you can listen to the
sound from the Recorder.
The audio cables are not connected
securely.
Connect the audio cable into the jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
The AUDIO options are set to the wrong
position.
Set the AUDIO options to the correct
position.
The disc is dirty.
Clean the disc.
The TV channels are not tuned in properly.
Check tuning, carry out tuning again.
Tape heads are dirty.
Clean video heads.
Tape is a rental or was recorded on
another VCR.
Use CH/TRK (v/V) for manual tracking
adjustment while tape is playing.
This unit can only output 525p
Progressive scan picture.
Make sure that your TV can support
525p Progressive scan picture or set
Progressive scan to off.
Picture from external
input is distorted.
The video signal from the external
component is copy-protected.
You cannot connect via the Recorder.
Connect the component directly to
your TV.
Some channels are
skipped over when
using CH (v / V).
The skipped channels were deleted with
the CH. Add/Del feature.
Use the CH. Add/Del feature to
restore channels. See [To Add or
Erase Channels from Memory] on
page 20.
No sound.
The playback picture is
poor.
Reference
Symptom
57
Downloaded From Disc-Player.com LG Manuals
Symptom
Cause
Correction
No disc is inserted.
No tape is inserted.
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
An unplayable disc is inserted.
Insert a playable disc. (Check the disc
type and Regional code.)
The disc is placed upside down.
Place the disc with the playback side
down.
The disc is not placed within the
guide.
Place the disc on the disc tray correctly
inside the guide.
The disc is dirty.
Clean the disc.
The Rating level is set.
Cancel the Rating function or change
the rating level.
Video tape cannot be
inserted.
Is the cassette compartment empty?
Eject the tape in.
The Remote Control
does not work properly.
There is an obstacle in the path of the
Remote Control and this unit.
Remove the obstacle.
The batteries in the Remote Control
are exhausted.
Replace the batteries with new ones.
The Remote Control is not pointed at
the remote sensor of the Recorder.
Point the Remote Control at the remote
sensor of the Recorder.
The Remote Control is too far from
the Recorder.
Operate the Remote Control within
23ft (7m).
This Remote Control use the same
buttons for VCR and DVD functions
(ex.PLAY).
When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
Camcorder image is
not shown.
Camcorder is off.
Turn camcorder on and operate
properly.
Camcorder image via
A/V input or DV IN to
Recorder is not shown
on TV screen.
The recorder’s source is incorrect.
Use INPUT to select input channel
(AV1, AV2 or DV IN).
Timer recording is not
possible.
Clock in record is not set to
correct time.
Set clock to correct time.
Timer has been programmed
incorrectly.
Reprogram Timer.
(TIMER Record) indicator light does
not appear after programming timer.
Reprogram Timer and turn record off to
enable timer.
The Recorder does not
start playback.
58
Downloaded From Disc-Player.com LG Manuals
Picture or sound of
broadcasting channel is
weak or missing.
Antenna or cables are loose.
Tighten connections or replace cable.
Wrong Tuning Band is selected in the
Recorder Setup menu.
Try [Tuning Band Select] options; see
page 19 for details.
Can’t play disc recorded
on this Recorder on
another DVD player.
The disc was recorded in Video mode.
Finalize the disc; see page 25.
Some players will not play even a
finalized disc recorded in Video mode.
No solution.
The disc was recorded in VR mode.
The other player must be RW
compatible in order to play it.
Discs recorded with copy-once material cannot be played on other players.
No solution.
The remaining blank space on the
disc is insufficient.
Use another disc.
The source you are trying to record is
copy-protected.
You cannot record the source.
When setting the recording channel,
the channel is tuned on the TV’s own
tuner.
Select the channel on the Recorder’s
built-in TV tuner.
When recording to a Video mode disc,
programs that are copy-once protected cannot be recorded.
Use a VR mode formatted disc for
copy-once material.
TV is not Stereo-compatible.
No solution.
Broadcast program is not in stereo format.
No solution.
Recorder A/V Out jacks are not
connected to TV A/V In jacks.
Make A/V connections. Stereo is available only via A/V output from Recorder.
Recorder Audio/Video Out is not
selected for viewing at the TV.
Select AUX or A/V source as TV input.
Recorder’s TV audio channel is set to
SAP or MONO.
Set TV audio channel mode to Stereo.
See [Changing TV Audio Channel] on
page 27.
Stereo Audio Record
and/or Playback not
present.
Reset the Recorder
If you observe any of the following symptoms...
When the Recorder is plugged in, but the
power will not turn on or off.
When the display window does not working.
When the Recorder does not operate normally.
You can reset the Recorder as follows :
Press and hold the POWER button for more
than five seconds. This will force the Recorder
to power off.
Press the POWER button again to turn the
Recorder back on.
Reference
Cannot record or did
not record successfully.
Dubbing
Correction
Cause
Symptom
Unplug the power cord and then plug the
power cord again after more than five seconds.
59
Downloaded From Disc-Player.com LG Manuals
Specifications
General
Power requirements
AC 120V, 60 Hz
Power consumption
35W
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Signal system
430 X 78.5 X 354 mm (16.9 x 3.1 x 13.9 inches) (w x h x d)
6.8 kg (14.96 lbs)
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
NTSC
Recording
Recording format
DVD VideoRecording, DVD-VIDEO
Recordable discs
DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable (Double Layer), DVD-Random Access Memory
DVD ; Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
DVD+R DL (8.5GB): Approx. 1 hour 50 minutes (XP mode),
3 hours 40 minutes (SP mode),
7 hours 10 minutes (LP mode), 11 hours (EP mode)
VCR ; SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
Recordable time
Video recording format
Sampling frequency
27MHz
Compression format
MPEG 2
Audio recording format
Sampling frequency
48kHz
Compression format
Dolby Digital
VCR Specifications
Head system
Timer
Tape speed
Tape width
Rewind time
Antenna
VHF output signal
Channel coverage
Frequency range
Signal-to-noise ratio
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
About 65 seconds (T-120)
75 ohms (VHF/UHF)
Channel 3 or 4 (Switchable)
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20Hz to 20kHz
43dB
Dynamic range
88 dB
Channel separation
60 dB
60
Downloaded From Disc-Player.com LG Manuals
DVD Specifications
Laser system
Semiconductor laser, wavelength 650 nm
Frequency response
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
Signal-to-noise ratio
More than 95dB
Harmonic distortion
Less than 0.008%
Dynamic range
More than 90 dB
Inputs
ANTENNA IN
VIDEO IN (AV1,2)
AUDIO IN (AV1,2)
S-VIDEO IN
Antenna or CATV input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2
-6 dBm more than 47 kohms, RCA jack (L, R) x 2
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
DV IN
4 pin (i.LINK/IEEE 1394 standard)
Outputs
VIDEO OUT
S-VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output (digital audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
Audio output (optical audio)
Optical connector x 1
Audio output (analog audio)
RF OUT
1.1 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2
Channel 3 or 4 (Switchable)
Accessory:
Audio cable (L, R) . . . . . . . . . . . . . . . .1
Remote Control . . . . . . . . . . . . . . . . . .1
Reference
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Design and specifications are subject to change without notice.
61
Downloaded From Disc-Player.com LG Manuals
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the
Warranty Period. After the Warranty Period, you pay
inbound shipping charges and LG pays return shipping
charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES
OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST
REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED
IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty
gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
Downloaded From Disc-Player.com LG Manuals
P/N : 3835RV0011V
Issue O
Printed in Korea
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement