Datasheet CPW
 "CPW": MULTIFUNCTION MICROCONTROLLERS FOR INDUSTRIAL AUTOMATION
Multifunction microcontroller/weight indicator, for use in industrial systems. 11 relays, 6 inputs, up to 3 serial outputs, 16 bit analogue output, Sysway transmission protocols, Modbus RTU and Profibus are some of the features of this indicator, which, added to the range of available application software programmes, allow for its use in dosage, control, and weight verification applications, with direct management of the automation. Omologabile CE­M (OIML R­76 / EN 45501).
MAIN FEATURES
CPW: microcontroller for the industrial ●
Easy to use 6­key waterproof keypad. automation. ●
Main semialphanumeric red LED display, highly efficient, with 6 digits 15 mm high. ●
Secondary alphanumeric backlit LCD display with 2 lines of 16 char. each. Synoptic bar graph with 16 bright indication LEDs showing the active functions. ●
Anodised aluminium case according to DIN standards, 193x97x140 mm, 187x91 mm perforation for mounting on a board. ●
Time/date and permanent memory data also in case of mains power interruptions. ●
Calibration and parameter Set­Up, configurable from PC with Dinitools or from keypad; theoretical calibration with entry of the characteristics of the load cells. ●
Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d CE­M legal for trade. ●
Up to displayable 1.000.000d for internal factory use. CPW: dimensions in mm. ●
Up to 8 signal linearisation points with DINITOOLS. ●
Internal resolution up to 3.000.000 points. ●
A/D 24 bit sigma­delta 4­channel conversion, up to 200 conv./sec. with automatic selection; connectable with up to 8 analog load cells with 350 OPTIONS AVAILABLE (only with order of indicator)
●
Panel printer. ●
RS485 interface. ●
RS422 interface. ●
Analogue output with D/A 16 bit Ohm input resistance. ●
Management up to 4 independent scales or digital equalisation of the 4 channels. ●
Power supply from 8 Vdc to 40 Vdc and upon request, 100­240 Vac (with ALSW optional external power adapter). ●
Connectable to printers and labellers through available driver commands. converter, 0­10Vdc, 0­20mA, 4­20mA or programmable. ●
Alibi Memory (for CPW03) ●
Ethernet interface. ●
Third serial port (for CPW03, CPW03BELT, CPW03LW models). ●
I/O SECTION
●
labeller, or other external units. ●
Profibus interface (for CPW03BELT, CPW03LW models). RS232/C bidirectional port configurable for connection to printer, RS232/C bidirectional port (optionally, RS485 or RS422) configurable for PC, PLC, or other external units. ●
Third RS232/C serial port (optional, depending on the model), for connection to remote scale, barcode reader or repeater. ●
11 0.5A 48 Vac / 1A 24 Vdc relay outputs programmable as weight thresholds or for automation management (depending on the software application). ●
6 optoisolated inputs, configurable as remote function keys or for automation management (depending on the software application). ●
Profibus output (optional, depending on the model), for remote management of the system. Available versions
Code
Description
CPW03
Multifunction microcontroller for industrial automation, with aluminium case, 6­key keypad, LED display and backlit LCD display.
CPW03BELT
Microcontroller / Weight indicator for management of continuous dosages on belt, with aluminium case, 6­
key keypad, LED display and backlit LCD display.
CPW03LW
Microcontroller / Weight indicator for management of continuous dosages on unloading, with aluminium case, 6­key keypad, LED display and backlit LCD display.
Options only available at time of order
Code
Description
KCEM
Kit of plates and Welmec form for the approval of the system for legal for trade use, for each provided platform/weighing system, connected to Dini Argeo indicator.
TECSUP
Technical assistance by telephone or at our premises for instrument configuration and printout formatting. NET HOURLY PRICE.
TPRPC
Thermal printer for panel mounting for use with weight indicator, with connection cable, 110­240Vac / 5 VDC power adapter included.
ADC16I
Analogue input with A/D 16 bit converter, configurable from 0 to 10Vdc or from 0 to 20mA through the keyboard or the PC through Dinitools. Maximum applicable resistance on the input in current is equal to 250 Ohm; minimum applicable resistance on the input in voltage equal to 15KOhm.
DAC16O
Analogue output with D/A 16 bit converter, configurable from 0 to 10Vdc or from 0 to 20mA; Maximum applicable resistance on the output in current is equal to 350 Ohm; minimum applicable resistance on the output in voltage equal to 10KOhm.
35ALMEM
Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight.
35RS485
RS485 port option
35RS422
RS422 bidirectional port option
IFKBRD
Keyboard input and third serial for connection to PC keyboard / bar code reader (to be combined with KBCBC cable with mini DIN connector) and for remote scale / weight repeater management.
KBCBC
Cable with MINI DIN connector for PC keyboard or badge/barcode reader connection (must be combined with IFKBRD serial interface).
IFKPB
PROFIBUS serial interface (with cable having a 9­pin connector for connection to Profibus external device).
DCATEXMB4
Declaration of ATEX conformity of the whole, Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for NON ATEX weight indicator connected to Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
KMB4
Kit of 3 passive safety zener barriers for up to 4 load cells of 350 ohm, housed in an ABS box, for intrinsic protection weighing systems in a hazardous area. Marking of the single barrier: ATEX II (1) GD [Ex ia] IIC [Ex iaD]. Marking of the whole box with three Zener barriers: ATEX II 3G Ex nA II T4 IP65 (­20°C ≤ Ta ≤ +40°C).
PRNSERV
Custom­made printouts of up to 4 print formats, for OBTPR../OBMMC/OBMDP/TM295/LX300 printers. NET PRICE
APRNSERV
Custom­made printouts of up to 4 print formats, for LP542S/SMTPLUS labellers. NET PRICE
Accessories
Code
ALSW
LP542S
PCKBRD
CMP
CMPCS
CMPI
CMPCSI
CMPELMC
CMPSMF
UKPLUG
UMAN
TECMAN
Description
100­240 VAC 2,1 A 12 Vdc output, switching power adapter
Thermal labeller with peel­off system, with 1,5 m RS232 cable for connection to weight indicator, external 100/240 Vac power adapter.
QWERTY PC keyboard. It needs a mini DIN cable.
Box for wall mounting in IP55 RAL7035 grey oven­fire painted metal, 410x610x250mm dimensions. Made to hold 1 CPW, up to 6 push buttons and/or pilot lights, and a printer for panel mounting (TPRPC). Fitted with non­reflecting screen, panel bottom plate, 2 push buttons, main switch, terminal board and fixing brackets.
Floor support column for CMP Box for wall mounting in IP65 stainless steel, 380x550x350mm dimensions. Made to hold 1 CPW, up to 6 push buttons and/or pilot lights, and a printer for panel mounting (TPRPC). Fitted with non­reflecting screen, panel bottom plate, 2 push buttons, main switch, terminal board and fixing brackets. Hatch with glass porthole.
Floor support column for CMPI in stainless steel.
CMP box with electromechanics. Fitted with emergency push button, pilot lights and wiring diagram; all according to regulations in force.
Three­way control box for CMP Power adapter from Schuko to BS1363.
Printed user manual (free, if downloaded from the web and available in the CD, fitted with the product). NET PRICE.
Printed technical manual (free, if downloaded from the web). NET PRICE.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement