Parker Hannifin 450025-001 BF Series 16 cu in. Bi-Flow Filter Drier Specification

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding

Filter-Driers

Catalog A-1, October 2007

Page 2 / Catalog A-1, Filter-Driers

Table of Contents

Filter-Driers

Introduction to Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Copper Service Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Cu LLD

®

Series Solid-Core Copper Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Liquid Line Filter-Driers

Gold Label™ Steel Liquid Line Filter-Drier (LLD Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Sahara Series Gold Label™ Liquid Line Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Steel Bi-flow Filter-Driers (BF Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Suction Line Filter-Driers

Gold Label™ Suction Line Filter-Driers (SLD Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Sahara Series™ Suction Line Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Replaceable Core Shells, Cores and Element

Replaceable Core Shells, Cores and Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Recovery and Reclaim Filters and Pre-Filters

PF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

SPD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Accessories - PRD-3 Series Oil Vapor Drier Separator

Steel Muffler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

OEM Components

Granular Copper Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Granular Spring Loaded Copper Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

CBF Bi-Flow Copper Filter-Driers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

© Copyright 2007, Parker Hannifin Corporation, Climate and Industrial Controls Group, Cleveland, OH

Catalog A-1, Filter-Driers / Page 3

Introduction to Filter-Driers

The function of a filter-drier in a refrigeration system is to remove contaminants that are harmful. If these contaminants remain at elevated levels, they will jeopardize the longevity of the system.

Contaminants that are frequently found include moisture, acid, copper oxides, metal chips, wax-like compounds and others.

Selecting a filter-drier for a particular application requires various technical factors to be considered. These factors include the type of system, connecting line size, water capacity, flow capacity

(size of system), filtration capability, acid capacity, material of construction

(steel vs. copper), and design pressures.

Evaluation of each factor is necessary to ensure proper and economical filterdrier design.

Parker has developed filter-drier recommendations based on current technical data, as well as many years of actual field experience. Products are tested for flow and water capacity using the

American Society of Heating, Refrigeration and Air Conditioning Engineers

(ASHRAE) Standard 63.1 and are rated for use based on the Air Conditioning and Refrigeration Institute’s guideline

ARI-710. Data obtained from this testing is shown in the capacities tables for liquid line filter-driers and can be used for comparison purposes. However, other factors must be considered for various types of equipment.

Moisture Removal

The ability to remove moisture from a refrigerant system is a primary function of the filter-drier. Moisture can come from many sources such as trapped air from improper evacuation, system leaks, and motor windings, to name a few. Another source is due to improper handling of polyolester (POE) lubricants, which are hygroscopic; that is, they readily absorb moisture. POEs can pick up more moisture from their surroundings and hold it much tighter than the mineral oils which have been used for many years. This moisture can cause freeze-ups and corrosion of metallic components. Moisture in the system can hydrolyze the POE lubricant, forming organic acids. These acids, if they exist in significant quantity, will react with materials within the system and can adversely affect component operation. To prevent the formation of these acids, the moisture must be minimized. This is accomplished by the use of a filter-drier that utilizes molecular sieve and activated alumina.

Molecular sieves are crystalline sodium alumino-silicates (synthetic zeolites) having cubic crystals which selectively adsorb molecules based on molecular size and polarity. The crystal structure is honeycombed with regularly spaced cavities or pores. Each of these cavities or pores are uniform in size. This permits molecules, such as water, to be adsorbed, while allowing other larger molecules, such as the refrigerant, lubricant and acids to pass by. The surface of the desiccant is charged positively with cations, which act as a magnet and will therefore adsorb polarized molecules, such as water, first and hold them tightly on the structure.

Acid Removal

Refrigerants by themselves are very stable, even when heated to a high temperature. However, certain conditions do occur which can result in the formation of acids. The reaction of refrigerants with water may cause hydrolysis and the formation of hydrochloric and hydrofluoric acids. These acids are usually present as a gas in the system and are highly corrosive. In ordinary usage this reaction is negligible, but in a very wet system operating at abnormally high temperature, some hydrolysis may occur.

if the thermal stability of the lubricant is exceeded for a period of time from an improper operating system.

Activated alumina is the desiccant of choice if added acid capacity is desired in the filter-drier. Many of the copper spun filter-driers referenced in this catalog are made with a 100% molecular sieve formulation and are not equipped with activated alumina. This is often all that is required for the type of system where they are used, since they minimize the potential of hydrolysis reactions of the lubricant and/or refrigerant.

Copper filter-driers are designed with a molecular sieve to achieve the maximum water capacity because they are typically smaller than the steel counterpart and need this capacity. However, copper spun filter-driers are available with molecular sieve/activated alumina formulations if desired.

For steel shell filter-driers, catalog products often utilize a molecular sieve/ activated alumina formulation appropriate with current system chemistries.

These products come standard with this desiccant blend because these products often find numerous applications in service where the type and amount of contaminants are unknown. For these applications, filter-driers with a blend of molecular sieve and activated alumina is advantageous.

Filtration

Scale, solder particles, metallic fines and all types of foreign substances must be removed to protect the compressor, solenoid valves, expansion valves, capillary tubes and other close tolerance parts of a refrigeration system.

Another significant source of acidity in refrigeration systems is organic acid formed from lubricant breakdown. As previously discussed, this can be the by-product of the hydrolyzed lubricant. However, organic acids can result from an oxidation reaction of the lubricant (from air left in the system) or

The solution to system filtration is the use of a filter-drier. The filter-drier can be constructed in two different formats to perform this function. The filter-drier can be a spring load desiccant design that utilizes multiple layers of a fibrous media that captures the circulating particulate. The alternate design (always used in large systems) is a molded core


Introduction to Filter-Driers

made with a specific desiccant formulation. The desiccants are sized and bonded in such a way that the useable shape provides the filtration. The large particles are caught on the surface of the core and the smaller solids are captured as the refrigerant channels through the desiccant core.

Steel vs. Copper

The major differences in using steel vs. copper filter-driers are the system sizes and applications. Copper filter-driers are normally used in smaller, less complex applications, systems with less pressure fluctuations and lower vibration tendencies. Some smaller systems do not require high filtration capabilities; however, some of the smaller systems using the new refrigerants will require better filtration. In order to meet these requirements, a molded core construction and filter-driers with additional fibrous media and screen should be considered.

Also, copper is typically the most economical option for smaller systems. Because copper driers are used for smaller applications, the refrigerant charge required will generally be smaller than in the steel filter-drier.

Information regarding operating pressure is required to adequately size the wall thickness of the filter-drier to attain the ultimate burst pressure, for both copper and steel. In accordance with

Underwriters Laboratories (UL), the burst pressure is rated as five times the design working pressure of the system, or three times the design working pressure of the system when evaluated using the fatigue stress test outlined in UL

1995. Typically, for copper filter-driers, the design working pressure can be correlated to tube diameter and wall thickness to meet specific UL specifications.

Copper Service Filter-Driers

Parker’s service copper filter-driers adsorb moisture and provide filtration to systems. The features of the service copper filter-driers provide contaminant control options to systems in the field.

MMS-80/100

MMS-200

Applications

■ ■

Air conditioning, heat pump, and

refrigeration systems

Features and Benefits

■ ■

Worldwide OEM acceptance and usage

■ ■

All copper construction for corrosion resistance and simplified brazing

■ ■

100% molecular sieve

■ ■

Compatible with commercially available refrigerants and lubricants

■ ■

UL recognized and CSA certified

712

319

620

CO73S


Copper Service Filter-Driers

Specifications

Model No.

MMS-80

MMS-100

MMS-200

712

319

619

620

621

CO73S

Part No.

058070-01

058198-01

032134-01

032092-00

032144-00

032142-00

032133-00

032143-00

032145-00

Molecular

Sieve

(wt.)

10g

10g

20g

10g

30g

10g

20g

20g

28g

Description

(Diameter in Inches)

Overall

Length

In.

mm

3/4 Non-directional 7.38

187

3/4 directional 7.38

187

1 directional step down

10.50 267

3/4 directional 8.50

216

1-3/16 directional 9.75

248

3/4 w/access valve 8.88

226

1 w/access valve 9.50

241

1 w/double inlet 9.00

229

1-5/8 directional 4.38

111

Inlet

Tube Size

OD (Inches)

1/4

1/4

1/4

5/16

3/8

1/4

5/16

1/4

5/16

5/16

—

ID (Inches)

3/16

3/16

3/16

1/4

5/16

3/16

—

3/16

1/4

1/4

3/8

Outlet

Tube Size

OD (Inches)

1/4

1/4

1/4

5/16

3/8

.089

.127

.089

.127

.127

—

ID (Inches)

3/16

3/16

3/16

1/4

5/16

.092 cap. tube

.130

.092 cap. tube

.130 cap. tube

.130 cap. tube

3/8

Model No.

MMS-80

MMS-100

MMS-200

712

319

619

620

621

CO73S

Part No.

058070-01

058198-01

032134-01

032092-00

032144-00

032142-00

032133-00

032143-00

032145-00

R-22

4 (14.1 kW)

Recommended Tonnages (kW)

R-134a R-404A, R-502, R-507

1/3 to 2 tons (1 to 7 kW) depending on application and system.

Contact Parker for details.

4 (14.1 kW) 3 (10.6 kW)

R-410A

4-1/2 (15.8 kW)

Water Capacity In Drops (Grams*) at ARI-710 Conditions

Model No.

Part No.

MMS-80

058070-01

MMS-100

058198-01

MMS-200

032134-01

712

032092-00

319

619

032144-00

032142-00

032133-00

620

621

CO73S

032143-00

032145-00

R-12 R-22

Water Capacity in Drops

R-134a R-401A, R-401B R-402A, R-402B

75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C)

33

33

30

30

29

29

27

27

32

32

31

31

32

32

30

30

33

33

30

30

66

33

99

33

66

66

92

61

30

91

30

61

61

85

59

29

89

29

59

59

83

54

27

82

27

54

54

76

65

32

97

32

65

65

91

62

31

93

31

62

62

86

65

32

97

32

65

65

91

60

30

90

30

60

60

84

66

33

99

33

66

66

92

61

30

91

30

61

61

85

Model No.

Part No.

MMS-80

058070-01

MMS-100

058198-01

MMS-200

032134-01

712

032092-00

319

619

620

621

CO73S

032144-00

032142-00

032133-00

032143-00

032145-00

* 20 Drops = 1 Gram = 1 cc

R-404A, R-507


R-407C R-410A R-502

75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C) 75°F (24°C) 125°F (52°C)

32 30 26 23 19 17 30 28

32

65

32

98

32

30

61

30

91

30

26

52

26

78

26

23

47

23

70

23

19

39

19

59

19

17

34

17

52

17

30

60

30

91

30

28

57

28

85

28

65

65

91

61

61

85

52

52

73

47

47

66

39

39

55

34

34

48

60

60

85

57

57

80


Cu LLD

®

Series Molded Core Copper Filter-Driers

Parker’s solid-core copper filter-driers adsorb system contaminants and provide physical filtration to systems between 1/2 and 5 tons (1.8 to 17.5 kW). Applications include air conditioning, heat pumps, and small refrigeration systems.

Application

installation

■ ■

System sizes between 1/2 to 5 tons (1.8

to 17.5 kW)

■ ■

100% molecular sieve molded core for maximum water capacity

■ ■

Copper construction offers excellent corrosion resistance in harsh environments


■ ■

One-piece copper shells in 1-3/16” to 2” (30.2 to 50.8 mm) outside diameter, along with spun ODF solder fittings in a variety of sizes, provides easy

Base Product Part No.

■ ■

Cu LLD


Model

No.

Cu LLD 3-2S

Cu LLD 3-3S

Cu LLD 5-3S

Cu LLD 8-3S

Cu LLD 16-3S


1/4

3/8

3/8

3/8

3/8

4.71

4.71

6.06

6.68

6.68

Installation Recommendations

120

120

154

170

170

Model No.

Cu LLD 3-2S

Cu LLD 3-3S

Cu LLD 5-3S

Cu LLD 8-3S

Cu LLD 16-3S

Fitting Type

ODF Solder

(Inches)

Overall Length

Tube

Diameter

Inches mm Inches mm

1.63

1.63

2.60

2.00

2.00

41

41

66

51

51

R-22

(60 ppm)

75°F

(24°C)

63

63

86

150

241

125°F

(52°C)

55

55

75

131

209

R-134a

(50 ppm)

75°F

(24°C)

69

69

94

165

263

125°F

(52°C)

62

62

85

147

236

R-404A, R-507

(50 ppm)

75°F

(24°C)

68

68

94

164

261

125°F

(52°C)

61

61

83

145

223

R-407C

(50 ppm)

75°F

(24°C)

48

48

66

115

173

125°F

(52°C)

41

41

56

98

147

R-410A

(50 ppm)

75°F

(24°C)

37

37

51

89

142

125°F

(52°C)

31

31

43

75

119

Tons

3/4

1-3/4

1-3/4

2

2

R-134a

Refrigeration

Commercial Low Temp. Equipment kW

2.6

6.1

6.1

7.0

7.0

Tons

3/4

1-1/2

1-1/2

1-1/2

1-1/2

R-22 kW

2.6

5.3

5.3

5.3

5.3

Nominal Ratings in Tons (kW)

Air Conditioning

OEM, Self-Contained/Field Replacement

R-404A, R-507

Tons

1/2

1-3/4

1-3/4

1-3/4

1-3/4

kW

1.8

6.1

6.1

6.1

6.1

Tons

1-1/2

3-1/2

3-1/2

3-1/2

4

R-134a kW

5.3

12.3

12.3

12.3

14

R-22, R-410A

Tons

1-1/2

3

3

3

3-1/2

kW

5.3

10.5

10.5

10.5

12.3

R-404A, R-407C,

R-507A

Tons

1

2-1/2

2-1/2

2-1/2

2-1/2

kW

3.5

8.8

8.8

8.8

8.8

Flow Capacity – Tons (kW) of Refrigeration at 1 psid (.07 Bar)

Model No.

R-22 R-134a

Cu LLD 2-3S

Cu LLD 3-2S

Cu LLD 3-3S

Cu LLD 5-3S

Cu LLD 8-3S

Cu LLD 16-3S

Tons

2.9

1.9

4.3

4.2

4.6

4.8

kW

10.2

6.7

15.1

14.7

16.1

16.8

Tons

2.6

1.7

3.9

3.8

4.2

4.4

kW

9.1

4.9

13.7

13.3

14.7

15.4

R-404A, R-507

Tons kW

1.9

6.7

1.2

2.8

2.7

3.0

3.1

4.2

9.8

9.5

10.5

10.9

Tons

2.9

1.8

4.2

4.1

4.5

4.7

R-407C kW

10.2

6.3

14.7

14.4

15.8

16.5

Tons

2.8

1.8

4.2

4.1

4.5

4.6

R-410A kW

9.8

6.3

14.7

14.4

15.8

16.1


Gold Label Steel Liquid Line Filter-Driers

LLD Series


■ ■

Unsurpassed moisture and acid capacities – maximum filtration capability for today’s systems

■ ■

Compatible with all commercially available refrigerants including R-410A

■ ■

Compatible with mineral oil, alkybenzene and POE lubricants

■ ■

Spring loaded, molecular sieve and activated alumina

■ ■

Solid copper ODF solder fittings and nickel plated steel SAE fittings

■ ■

Powder paint exterior coating surpasses

500 hour ASTM salt spray test to resist corrosion

■ ■

Models 030 thru 160 series are rated for

600 psig. Models 300, 410 and 750 series are rated for 500 psig

■ ■

U.L. listed SA3441

C US

LISTED


Model

Series

R-22

(60 ppm)

R-134a

(50 ppm)

R-404A, R-507

(50 ppm)

R-407C

(50 ppm)

R-410A

(50 ppm)

030

050

080

160

300

410

750


71

177

250

358

755

1053

1607


66

160

230

325

698

973

1485

78

196

277

395

826

1151

1757

74

185

262

375

786

1096

1673

78

194

273

389

822

1145

1748

73

182

257

367

773

1078

1645

55

127

180

258

579

806

1231

49

115

162

232

521

726

1109

42

87

124

178

446

622

949

37

78

111

159

397

554

846

Refrigerant Holding Capacity – Ounces (kg) of refrigerant @ 100°F (38°C)

Model

Series

030

050

080

160

300

410

750

R-12

Ounces

1.9

3.3

6.1

9.1

26.7

37.3

71.3

2.6

7.3

10.6

20.2

kg

0.5

0.9

1.7

Ounces

R-22

1.7

3.0

5.5

8.2

24.2

33.8

64.5

2.3

6.9

9.6

18.3

kg

0.5

0.9

1.6

R-134a

Ounces

1.8

3.0

5.6

kg

0.5

0.9

1.6

8.4

24.5

34.2

65.3

2.4

6.9

9.7

18.5

R-404A, R-507

Ounces kg

1.5

2.6

4.8

0.4

0.7

1.4

7.1

20.7

29.0

55.3

2.0

5.9

8.2

15.7

R-407C

Ounces

1.5

2.8

5.3

kg

0.4

0.8

1.5

7.8

20.8

29.0

56.5

2.2

5.9

8.2

16

R-410A

Ounces

1.5

2.6

4.8

kg

0.4

0.7

1.4

7.2

21.1

29.4

56.2

2.0

6.0

8.3

15.9

R-502

Ounces

1.8

2.9

5.4

8.0

24.4

34.1

65.2

2.3

6.9

9.7

18.5

kg

0.5

0.8

1.5

B B

A A



Flow Capacity – Tons of Refrigeration at 1 psid (0.07 bar)

414S

415

415S

417S

756S

306

307S

413

413S

414

757S

759S

303S

304

304S

305

305S

164

164S

165

165S

303

0825S

083

083S

084

084S

162

162S

1625S

163

163S

032

032S

032MF

052

052S

0525S

053

053S

082

082S

Model No.

Fitting Type

(Inches)

1/4 SAE Flare

Overall Length

Inches

Shell

Diameter

R-22

Flow Capacity – Tons (kW) @ 1 psid (0.07 bar)

R-134a R-404A, R-507 R-407C R-410A

Inches mm Inches mm Tons kW Tons kW Tons kW Tons kW Tons kW

4.16

106 1.66

42 1.70

6.0

1.54

5.4

1.10

3.9

1.64

5.7

1.67

5.8

1/4 ODF Solder 3.73

1/4 male x female flare 3.91

1/4 SAE Flare

1/4 ODF Solder

5/16 ODF Solder

4.88

4.38

4.38

95

99

124

124

124

1.66

1.66

2.38

2.38

2.38

42

42

60

60

60

1.84

1.70

1.84

2.05

6.4

6.0

6.4

7.2

1.72

1.54

1.72

1.80

6.0

5.4

6.0

6.3

1.22

1.10

1.22

1.29

3.32

11.6

3.00

10.5

2.14

4.3

3.9

4.3

4.5

7.5

1.82

1.64

1.82

1.91

6.4

5.7

6.4

6.7

1.86

1.67

1.86

1.95

6.5

5.8

6.5

6.8

3.19

11.2

3.25

11.4

3/8 SAE Flare

3/8 ODF Solder

1/4 SAE Flare

1/4 ODF Solder

5/16 ODF Solder

3/8 SAE Flare

3/8 ODF Solder

1/2 SAE Flare

1/2 ODF Solder

1/4 SAE Flare

5.25

4.38

5.63

5.25

5.25

6.00

5.25

6.38

5.38

6.31

133

124

143

133

133

152

133

162

137

160

2.38

2.38

2.38

2.38

2.38

2.38

2.38

2.38

2.38

2.38

60

60

60

60

60

60

60

60

60

60

3.96

13.9

3.60

12.6

2.57

4.74

16.6

4.29

15.0

3.06

10.7

4.56

16.0

4.64

16.2

1.84

2.12

6.4

7.4

1.72

1.89

6.0

6.6

1.22

1.35

3.46

12.1

3.17

11.1

2.27

9.0

4.3

4.7

7.9

3.83

13.4

3.90

13.7

1.82

2.01

3.37

6.4

7.0

11.8

1.86

2.04

3.43

6.5

7.1

12.0

4.45

15.6

4.03

14.1

2.88

10.1

4.28

15.0

4.36

15.3

5.02

17.6

4.54

15.9

3.25

11.4

4.83

16.9

4.92

17.2

7.14

25.0

6.43

22.5

4.59

16.1

6.84

23.9

6.96

24.4

7.21

25.2

6.52

22.8

4.65

16.3

6.93

24.2

7.05

24.7

2.19

7.6

1.97

6.9

1.41

4.9

2.10

7.4

2.13

7.5

1/4 ODF Solder

5/16 ODF Solder

3/8 SAE Flare

3/8 ODF Solder

1/2 SAE Flare

1/2 ODF Solder

5/8 SAE Flare

5/8 ODF Solder

3/8 SAE Flare

3/8 ODF Solder

1/2 SAE Flare

1/2 ODF Solder

5/8 SAE Flare

5/8 ODF Solder

3/4 SAE Flare

7/8 ODF Solder

3/8 SAE Flare

3/8 ODF Solder

1/2 SAE Flare

1/2 ODF Solder

5/8 SAE Flare

5/8 ODF Solder

7/8 ODF Solder

3/4 ODF Solder

7/8 ODF Solder

1-1/8 ODF Solder

5.88

5.88

6.75

5.94

7.00

6.06

7.25

6.31

9.69

8.86

9.94

9.00

149

149

171

151

178

154

194

160

246

225

252

229

10.19

259

9.24

10.44

9.30

9.88

9.05

10.13

257

9.20

10.38

264

9.43

9.49

15.11

384

15.11

15.99

235

265

236

251

230

234

240

241

384

406

2.38

2.38

2.38

2.38

2.38

2.38

2.38

2.38

3.00

3.00

3.00

3.00

3.00

3.00

3.00

3.00

3.50

3.50

3.50

3.50

3.50

3.50

3.50

3.50

3.50

3.50

60

60

60

60

60

60

60

60

76

76

76

76

76

76

76

76

311

311

2.40

8.4

2.14

7.5

1.53

4.03

14.1

3.69

12.9

2.63

5.4

9.2

2.28

8.0

2.32

8.1

3.92

13.7

3.99

14.0

5.30

18.6

4.80

16.8

3.43

12.0

5.10

17.9

5.20

18.2

5.94

21.8

5.32

18.6

3.80

13.3

5.65

19.8

5.75

20.1

9.05

31.7

8.15

28.5

5.82

20.4

8.66

30.3

8.81

30.8

9.83

34.4

8.83

30.9

6.31

22.1

9.39

32.8

9.56

33.5

12.58

44.0

11.40

39.9

8.15

28.5

12.12

42.4

12.34

43.2

13.01

45.5

11.75

41.1

8.39

29.4

12.49

43.7

12.71

44.5

5.44

19.2

4.89

17.1

3.49

12.2

5.19

18.2

5.29

18.5

6.15

21.5

5.57

19.5

3.98

13.9

5.92

20.7

6.03

21.1

10.75

31.6

9.69

33.9

6.92

24.2

10.30

36.1

10.48

36.7

12.44

43.5

11.23

39.3

8.02

28.1

11.94

41.8

12.15

42.5

14.71

51.4

13.29

46.5

9.49

33.2

14.13

49.5

14.38

50.3

16.26

56.9

14.66

51.3

10.47

36.6

15.58

54.5

15.86

55.5

16.47

57.6

14.92

52.2

10.66

37.3

15.86

55.5

16.14

56.5

20.15

70.5

18.18

63.6

12.98

45.4

19.32

67.6

19.67

68.8

5.44

19.0

4.89

17.1

3.49

12.2

5.19

18.2

5.29

18.5

6.15

21.5

5.57

19.5

3.98

13.9

5.92

20.7

6.03

21.1

311 10.82

37.9

9.78

34.2

6.98

24.4

10.39

36.3

10.58

37.0

311 12.44

43.5

11.23

39.3

8.02

28.1

11.94

41.8

12.15

42.5

311 14.71

51.4

13.29

46.5

9.49

33.2

14.13

49.5

14.38

50.3

311 16.26

56.9

14.66

51.3

10.47

36.6

15.58

54.5

15.86

55.5

311 23.12

80.9

20.84

72.9

14.88

52.1

22.15

77.5

22.54

78.9

311 19.65

68.8

17.75

62.1

12.68

44.4

18.87

66.0

19.20

67.2

311

311

24.32

26.80

85.1

93.8

22.04

24.27

77.1

84.9

15.74

17.33

55.1

60.7

23.42

25.79

82.0

90.3

23.84

26.26

83.4

91.9

Note: Models 083S-XF, 163S-XF and 303S-XF are available with modified three angstrom molecular sieve for R-410A.



Installation Recommendations – Tons (kW)

Model No.

Tons

R-134a kW

Refrigeration

Commercial Low Temp. Equipment

R-22

Tons kW

414S

415

415S

417S

756S

305

305S

307S

413

414

757S

759S

165S

303

303S

304

304S

163

163S

164

164S

165

082

082S

0825S

083

083S

084

084S

162

162S

1625S

032

032S

032MF

052

052S

0525S

053

053S

1/4

1/3

1/2 thru

1-1/2

1 thru

2

3 thru

5

5 thru

10

15

0.9

1.2

1.8 thru

5.3

3.5 thru

7

5.3

thru

17.5

17.5

thru

35

52.5

1/4

1/3

1/2 thru

1-1/2

1-1/2 thru

3

3 thru

5

5 thru

12

15

0.9

1.2

1.8

thru

5.3

5.3

thru

10.5

5.3

thru

17.5

17.5

thru

42

52.5

R-404A, R-507

Tons kW

1/4

1/3

1/2 thru

1

3/4 thru

2

2 thru

5

5 thru

10

10

0.9

1.2

1.8

thru

3.5

2.6

thru

7

2.6

thru

17.5

17.5

thru

35

35


Field Replacement or Field Build-up Equipment

Tons

R-134a kW

R-22, R-407C, R-410A

Tons kW

1/2

3/4 thru

1

3/4 thru

2

1 thru

5

3 thru

7-1/2

5 thru

12

15

1.8

2.6

thru

3.5

2.6

thru

7

3.5

thru

17.5

5.3

thru

26.3

17.5

thru

42

52.5

1/2

3/4 thru

2

1 thru

2

1-1/2 thru

5

4 thru

10

7-1/2 thru

15

20

1.8

2.6

thru

7

3.5

thru

7

1.8

thru

17.5

14 thru

35

26.3

thru

52.5

70


Sahara Series™ Liquid Line Filter-Driers

Available only from your local Parker wholesaler, the Sahara Series is a service replacement filter-drier for air conditioning applications.

Features & Benefits

■ ■

High moisture and filtration capacity

■ ■

Compatible with POEs, alkylbenzenes and mineral oils

■ ■

Compatible with R-12, R-22, R-134a, R-407C and R-410A

■ ■

Copper ODF solder fittings

■ ■



■ ■

600 psig (41.4 bar) design pressure. U.L.

File No. SA3441

C US

LISTED


Model

SS-053S

SS-083S

SS-163S

75°F (24°C)

82

106

188


R-22

(60 ppm)

125°F (52°C)

75

97

173

75°F (24°C)

89

115

205

R-134a

(50 ppm)

125°F (52°C)

85

110

195

75°F (24°C)

68

88

156

R-407C

(50 ppm)

125°F (52°C)

58

75

133


Model

SS-053S

SS-083S

SS-163S

Internal

Volume

(Cubic Inches)

5.6

9.4

13.1

R-22 R-134a R-407C R-410A

Ounces kg Ounces kg Ounces kg Ounces kg

7.8

10.0

11.4

2.2

2.8

3.2

7.9

10.1

11.6

2.2

2.9

3.3

7.3

9.4

10.9

2.1

2.7

3.1

6.7

8.6

9.8

1.9

2.4

2.8

Dimensions

Model No.

(ODF Solder)

SS-053S

SS-083S

SS-163S

ODF Solder

(Inches)

3/8

3/8

3/8

Cutout

Length “A”

Inches mm Inches mm

3.25

4.13

4.75

83

105

121

Overall

Length “B”

4.39

5.27

5.92

112

134

150

Note: For additional performance capacities, specify the Parker Gold Series Filter-Driers (page 7).

ODF Solder

75°F (24°C)

46

60

105

R-410A

(50 ppm)

125°F (52°C)

44

57

102

2.38” (60.5 mm)

A

B


Steel Bi-Flow Filter-Driers – BF Series

The BF Series bi-flow filter-drier is designed specifically for heat pump or reverse cycle applications. External check valves are not required since they are incorporated within the filter-drier.


internal construction for added filtration

■ ■

100% copper ODF solder or nickel plated flare fittings

■ ■

Core is cushioned in fiber gaskets to protect core and to ensure trouble-free performance

■ ■

Desiccant core provides reliable and effective removal of solid contaminants, acid and moisture

■ ■



■ ■

Model BF-163(S)-XF features R-32 excluding desiccant for R-410A and alternative

■ ■

U.L. listed file SA3441

C US

LISTED

Dimensions

A

Model No.

Flare ODF Solder

— BF082S

BF083 BF083S

BF084 BF084S

— BF162S

BF163 BF163S

— BF163S-XF

BF164 BF164S

— BF165S

Fitting Size

(Inches)

1/4

3/8

1/2

1/4

3/8

3/8

1/2

5/8

System

Cutout

Length

“A”

System

Cutout

Length

“B”

System

Cutout

Length

“C”

Shell

Diameter

“D”

Inches mm Inches mm Inches mm Inches mm

— — 4.10

104 5.27

134 2.50

64

6.09

155 4.10

104 5.27

134 2.50

64

6.35

161 4.10

104 5.41

137 2.50

— — 4.10

104 5.92

150 2.50

6.75

171 4.75

121 5.92

150 2.50

6.09

155 6.76

172 7.56

192 3.00

7.00

178 4.75

121 6.06

154 2.50

— — 4.75

172 6.30

160 2.50

64

64

64

64

76

64

Flow Direction

Cooling Mode


Model

Series

BF080

BF160

BF160-XF

R-12

Ounces

8.2

9.5

15.5

kg

2.3

2.7

4.4

R-22

Ounces kg

7.4

2.1

8.6

14.0

2.4

4.0

R-134a

Ounces

7.5

8.7

14.2

kg

2.1

2.5

3.5

R-404A, R-507

Ounces kg

6.3

1.8

7.4

12.0

2.1

3.4

R-407C

Ounces

7.0

8.2

13.2

kg

2.0

2.3

3.7

B

C

R-410A

Ounces kg

6.4

1.8

7.5

12.2

2.1

3.5

D

Flow Direction

Heating Mode

R-502

Ounces

7.5

8.7

14.2

kg

2.1

1.1

4.0


Model

Series

BF080

BF160

BF160-XF

R-22

(60 ppm)

R-134a

(50 ppm)

R-404A, R-507

(50 ppm)

R-407C

(50 ppm)

R-410A

(50 ppm)


95 88 104 99 104 98 73 65 56 50

134

168

124

155

147

184

140

175

148

185

138

173

103

197

93

176

79

197

71

176


BF082S

BF083S

BF084S

BF083

BF084

BF162S

BF163S

BF164S

BF165S

BF163

BF164

BF163S-XF

BF163-XF

Flow Capacity — Tons (kW) of Refrigeration at 1 psid (0.07 bar)

Model No.

Filter Area (cu inches)

R-22

10.4

14.4

14.4

2.8

3.5

2.1

2.9

3.5

Tons

2.1

2.8

3.5

4.9

2.8

3.5

3.6

2.8

kW

7.4

8.4

12.2

8.4

12.2

7.4

10.2

12.2

17.2

9.8

12.3

12.6

9.8

4.5

2.6

3.2

3.3

2.6

2.6

3.2

1.9

2.6

3.2

Tons

R-134a

1.9

2.6

3.2

kW

6.7

9.1

11.2

9.1

11.2

6.7

9.1

11.2

15.8

9.1

11.2

11.6

9.1

3.2

1.8

2.3

2.3

1.8

1.8

2.3

1.4

1.9

2.3

R-404A, R-507

Tons kW

1.4

1.8

2.3

4.9

6.3

8.1

6.3

8.1

4.9

6.7

8.1

11.2

6.3

8.1

8.1

6.3

4.8

2.7

3.4

3.5

2.7

2.7

3.4

2.0

2.8

3.4

Tons

R-407C

2.0

2.7

3.4

kW

7.0

9.5

11.9

15.4

9.5

11.9

12.3

9.5

9.5

11.9

7.0

9.8

11.9

4.9

2.8

3.5

3.5

2.8

2.8

3.5

2.1

2.9

3.5

Tons

R-410A

2.1

2.8

3.5

kW

7.4

9.8

12.3

9.8

12.3

7.4

10.2

12.3

17.2

9.8

12.3

12.3

9.8


Gold Label Steel Suction Line Filter-Driers

SLD Series

The SLD Series is a solid core clean-up filter-drier for use in the suction line.The compact design incorporates a large outside diameter shell, which results in a shorter lay-in length, and a larger core, which provides a greater filtration area for maximum operating efficiency.

The core material has controlled porosity which effectively removes and holds a maximum amount of contaminants with a minimal pressure drop. In addition, the core material collects and holds acids and other harmful contaminants present after a motor burnout.

Access valves on both the inlet and outlet sides make it easy to measure pressure accurately. Occasionally, enough contaminant matter may collect in the filter core to cause a slight pressure drop. The access valves on the SLD make it easy to determine if added pressure drop exists across the filter-drier.


■ ■

Molded porous core

■ ■

High acid capacity

■ ■

Low pressure drop — exceptionally high flow rates

■ ■

Designed for system clean-up

■ ■

500 hours salt spray protection

■ ■

Short system cut-out lengths allow installation in tight areas

■ ■

Two access valves simplify pressure drop measurement

■ ■

Flare or ODF Solder fittings

■ ■

UL listed — File No. SA3441

Steel Suction Line Filter-Drier Dimensions

Model No.

SLD 8-3V-HH

SLD 8-3SV-HH

SLD 8-4V-HH

SLD 8-4SV-HH

SLD 8-5SV-HH

SLD 8-6SV-HH

SLD8-7SV-HH

SLD 13-5V-HH

SLD 13-5SV-HH

SLD 13-6SV-HH

SLD 13-7SV-HH

SLD 13-9SV-HH

SLD 27-7SV-HH

SLD 27-9SV-HH

SLD 54-11SV-HH

SLD 54-13SV-HH

“A”

Overall Length

5.82

4.91

4.97

4.97

5.72

6.97

7.72

12.0

12.0

Inches

5.13

4.31

5.38

4.44

4.66

4.72

4.72

170

196

305

305

148

125

126

126

145

mm

130

109

137

113

118

120

120

“B”

System Cutout Length

—

3.45

3.45

3.47

3.47

5.47

5.47

9.17

9.17

Inches

—

3.13

—

3.13

3.16

3.16

3.16

139

139

233

233

—

88

88

88

88

—

80

80

80

80

mm

—

80

Shell Diameter

4.00

4.00

4.00

4.00

4.00

4.00

4.00

4.00

4.00

Inches

3.00

3.00

3.00

3.00

3.00

3.00

3.00

102

102

102

102

102

102

102

102

102

mm

76

76

76

76

76

76

76

B

A

C US

LISTED


Steel Suction Line Filter-Drier

Water Capacity In Drops (Grams*) at 65°F (18°C)

Model No.

SLD 8-3V-HH

SLD 8-3SV-HH

SLD 8-4V-HH

SLD 8-4SV-HH

SLD 8-5SV-HH

SLD 8-6SV-HH

SLD 8-7SV-HH

SLD 13-5V-HH

SLD 13-5SV-HH

SLD 13-6SV-HH

SLD 13-7SV-HH

SLD 13-9SV-HH

SLD 27-7SV-HH

SLD 27-9SV-HH

SLD 54-11SV-HH

SLD 54-13SV-HH

Fitting

(Inches)

3/8 SAE Flare

3/8 ODF Solder

1/2 SAE Flare

1/2 ODF Solder

5/8 ODF Solder

3/4 ODF Solder

3/4 ODF Solder

5/8 SAE Flare

5/8 ODF Solder

3/4 ODF Solder

7/8 ODF Solder

1-1/8 ODF Solder

7/8 ODF Solder

1-1/8 ODF Solder

1-3/8 ODF Solder

1-5/8 ODF Solder

Desiccant

(Cu. In.)

13.5

13.5

13.5

27

27

54

54

8

8

8

13.5

13.5

8

8

8

8

Filter Area

(Sq. In.)

26

26

26

49

49

88

88

17

17

17

26

26

17

17

17

17

R-22

284

284

284

568

568

1136

1136

168

168

168

284

284

168

168

168

168

R-134

284

284

284

568

568

1136

1136

168

168

168

284

284

168

168

168

168

R-404A, R-507

312

312

312

624

624

1248

1248

185

185

185

312

312

185

185

185

185

R-410A


Flow Capacity – Tons of Refrigeration

Refrigerant R-22 R-134a R-404A, R-507 R-407C R-410A

Evaporator Temp °F 40 20 0 -20 -40 40 20 0 -20 40 20 0 -20 -40 40 20 0 -20 -40 40 20 0 -20 -40

Pressure Drop PSI 3

SLD 8-3V-HH

2 1.5

1 0.5 2.0 1.5 1.0 0.5

3 2 1.5

1 0.5 3.0 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 0.5

1.1 0.8 0.6 0.4 0.2 0.7 0.6 0.5 0.4 1.0 0.7 0.5 0.3 0.2 1.1 0.8 0.6 0.4 0.2 1.4 0.6 0.5 0.3 0.1

SLD 8-3SV-HH

SLD 8-4V-HH

SLD 8-4SV-HH

SLD 8-5SV-HH

SLD 8-6SV-HH

SLD 8-7SV-HH

1.2 0.9 0.7 0.5 0.3 0.8 0.7 0.6 0.5 1.1 0.8 0.6 0.4 0.2 1.2 0.9 0.7 0.5 0.3 1.5 0.7 0.5 0.4 0.2

2.3 1.6 1.1 0.7 0.4 1.5 1.2 0.9 0.7 2.1 1.4 0.9 0.6 0.3 2.2 1.6 1.1 0.7 0.4 2.9 1.2 0.8 0.5 0.3

2.6 1.8 1.2 0.8 0.5 1.7 1.4 1.0 0.8 2.3 1.6 1.0 0.7 0.4 2.5 1.8 1.2 0.8 0.5 3.2 1.4 0.9 0.6 0.4

3.9 2.6 1.8 1.2 0.6 2.5 2.0 1.5 1.1 3.5 2.3 1.5 1.0 0.5 3.8 2.6 1.8 1.2 0.6 4.8 2.0 1.4 0.9 0.4

4.2 2.8 1.9 1.3 0.6 2.7 2.1 1.6 1.2 3.8 2.5 1.6 1.1 0.5 4.1 2.8 1.9 1.3 0.6 5.2 2.1 1.4 1.0 0.4

4.2 2.8 1.9 1.3 0.6 2.7 2.1 1.6 1.2 3.8 2.5 1.6 1.1 0.5 4.1 2.8 1.9 1.3 0.6 5.2 2.1 1.4 1.0 0.4

4.2 2.8 2.0 1.3 0.8 2.7 2.1 1.7 1.2 3.8 2.5 1.7 1.1 0.6 4.0 2.7 2.0 1.3 0.8 5.1 2.1 1.5 1.0 0.6

SLD 13-5V-HH

SLD 13-5SV-HH

SLD 13-6SV-HH

SLD 13-7SV-HH

SLD 13-9SV-HH

5.0 3.0 2.5 1.5 1.0 3.2 2.3 2.1 1.4 4.5 2.7 2.1 1.2 0.8 4.9 3.0 2.5 1.5 1.0 6.2 2.3 1.9 1.1 0.7

7.0 4.5 3.0 2.0 1.0 4.5 3.4 2.5 1.9 6.3 4.0 2.6 1.7 0.8 6.8 4.5 3.0 2.0 1.0 8.7 3.4 2.3 1.5 0.7

7.0 4.5 3.0 2.0 1.0 4.5 3.4 2.5 1.9 6.3 4.0 2.6 1.7 0.8 6.8 4.5 3.0 2.0 1.0 8.7 3.4 2.3 1.5 0.7

7.2 4.6 3.1 2.1 1.0 4.6 3.5 2.6 2.0 6.4 4.1 2.6 1.7 0.8 7.0 4.6 3.1 2.1 1.0 8.9 3.5 2.3 1.6 0.7

SLD 27-7SV-HH

SLD 27-9SV-HH

10.0 8.0 5.0 3.0 2.0 6.4 6.0 4.2 2.9 8.9 7.2 4.3 2.5 1.6 9.7 7.9 5.0 3.1 2.1 12.4 6.1 3.8 2.2 1.5

13.0 9.0 6.0 4.0 2.0 8.3 6.8 5.1 3.8 11.6 8.1 5.1 3.3 1.6 12.7 8.3 6.0 4.1 2.1 16.1 6.9 4.5 3.0 1.5

SLD 54-11SV-HH

20.0 13.5 9.5 6.5 3.5 12.8 10.2 8.0 6.2 17.9 12.1 8.1 5.4 2.8 19.5 13.4 9.5 6.6 3.6 24.8 10.3 7.2 4.8 2.6

SLD 54-13SV-HH

23.0 16.0 11.0 7.0 4.0 14.7 12.1 9.3 6.7 20.6 14.3 9.4 5.8 3.2 22.4 15.8 11.1 7.1 4.1 28.5 12.2 8.3 5.2 2.9

Flow Capacity – kW of Refrigeration

Refrigerant R-22 R-134a R-404A, R-507 R-407C R-410A

Evaporator Temp °C 4 -6 -18 -29 -40 4 -6 -18 -29 4 -6 -18 -29 -40 4 -6 -18 -29 -40 4 -6 -18 -29 -40

Pressure Drop Bar 0.21 0.14 0.11 0.07 0.04 0.14 0.11 0.07 0.04 0.21 0.14 0.11 0.07 0.04 0.21 0.14 0.11 0.07 0.04 0.21 0.14 0.11 0.07 0.04

SLD 8-3V-HH

3.9 2.8 2.1 1.4 0.7 2.5 2.1 1.8 1.4 3.5 2.5 1.8 1.1 0.7 3.9 2.8 2.1 1.4 0.7 4.9 2.1 1.8 1.1 0.4

SLD 8-3SV-HH

SLD 8-4V-HH

SLD 8-4SV-HH

SLD 8-5SV-HH

SLD 8-6SV-HH

4.2 3.2 2.5 1.8 1.1 2.8 2.5 2.1 1.8 3.9 2.8 2.1 1.4 0.7 4.2 3.2 2.5 1.8 1.1 5.3 2.5 1.8 1.4 0.7

8.1 5.6 3.9 2.5 1.4 5.3 4.2 3.2 2.5 7.4 4.9 3.2 2.1 1.1 7.7 5.6 3.9 2.5 1.4 10.2 4.2 2.8 1.8 1.1

9.1 6.3 4.2 2.8 1.8 6.0 4.9 3.5 2.8 8.1 5.6 3.5 2.5 1.4 8.8 6.3 4.2 2.8 1.8 11.2 4.9 3.2 2.1 1.4

13.7 9.1 6.3 4.2 2.1 8.8 7.0 5.3 3.9 12.3 8.1 5.3 3.5 1.8 13.3 9.1 6.3 4.2 2.1 16.8 7.0 4.9 3.2 1.4

14.7 9.8 6.7 4.6 2.1 9.5 7.4 5.6 4.2 13.3 8.8 5.6 3.9 1.8 14.4 9.8 6.7 4.6 2.1 18.2 7.4 4.9 3.5 1.4

14.7 9.8 6.7 4.6 2.1 9.5 7.4 5.6 4.2 13.3 8.8 6.0 3.9 2.1 14.0 9.5 7.0 4.6 2.8 17.9 7.4 5.3 3.5 2.1

SLD 8-7SV-HH

SLD 13-5V-HH

SLD 13-5SV-HH

SLD 13-6SV-HH

SLD 13-7SV-HH

14.8 9.9 7.0 4.6 2.8 9.5 7.4 6.0 4.2 13.4 8.8 6.0 3.9 2.1 14.1 9.5 7.0 4.6 2.8 17.9 7.4 5.3 3.5 2.1

17.6 10.6 8.8 5.3 3.5 11.3 8.1 7.4 4.9 15.8 9.5 7.4 4.2 2.8 17.2 10.6 8.8 5.3 3.5 21.8 8.1 6.7 3.9 2.5

24.5 15.8 10.5 7.0 3.5 15.8 11.9 8.8 6.7 22.1 14.0 9.1 6.0 2.8 23.8 15.8 10.5 7.0 3.5 30.5 11.9 8.1 5.3 2.5

24.5 15.8 10.5 7.0 3.5 15.8 11.9 8.8 6.7 22.1 14.0 9.1 6.0 2.8 23.8 15.8 10.5 7.0 3.5 30.5 11.9 8.1 5.3 2.5

SLD 13-9SV-HH

SLD 27-7SV-HH

SLD 27-9SV-HH

25.2 16.2 10.9 7.4 3.5 16.1 12.3 9.1 7.0 22.4 14.4 9.1 6.0 2.8 24.5 16.1 10.9 7.4 3.5 31.2 12.3 8.1 5.6 2.5

35.0 28.0 17.5 10.5 7.0 22.4 21.0 14.7 10.2 31.2 25.2 15.1 8.8 5.6 34.1 27.7 17.5 10.9 7.4 43.4 21.4 13.3 7.7 5.3

45.5 31.5 21.0 14.0 7.0 29.1 23.8 17.9 13.3 40.6 28.4 17.9 11.6 5.6 44.5 29.1 21.0 14.4 7.4 56.4 24.2 15.8 10.5 5.3

SLD 54-11SV-HH

70.0 47.3 33.3 22.8 12.3 44.8 35.7 28.0 21.7 62.7 42.4 28.4 18.9 9.8 68.3 46.9 33.3 23.1 12.6 86.8 36.1 25.2 16.8 9.1

SLD 54-13SV-HH

80.5 56.0 38.5 24.5 14.0 51.5 42.3 32.6 23.5 72.1 56.0 32.5 26.3 11.2 78.4 55.3 38.9 24.9 14.4 94.8 42.7 29.1 18.2 10.2

338

338

338

676

676

1352

1352

200

200

200

338

338

200

200

200

200


Sahara Series™ Suction Line Filter-Driers

The Sahara Series suction line filter-driers complement Parker’s SLD Series suction line filter-driers by offering a standard size alternative for air conditioning applications. The Sahara products provide the required protection as a service filter-drier for handling the contaminant removal requirements associated with these systems.

The Sahara Series includes a desiccant blend formulation to handle moisture and acids while the internal assembly provides the filtering to remove harmful particles in circulation.

For other applications or air conditioning systems where uniquely higher capacities are desired, the Parker Gold Label SLD molded core suction line filter-driers are suggested.


■ ■

Service filter-drier for air conditioning systems

■ ■

Desiccant blend suited for acid and moisture removal

■ ■

Copper fittings for easy installation

■ ■

Access port for checking system pressure drop

■ ■

Corrosion resistant black powder coating surpasses 500-hour ASTM salt spray testing

■ ■

Compatible with commercially available refrigerants

Sahara Series Suction Line Filter-Drier Dimensions

Model No.

SLD165-V

SLD166-V

SLD167-V

SLD305-V

SLD306-V

SLD307-V

Fitting Type

(Inches)

5/8 ODF Solder

3/4 ODF Solder

7/8 ODF Solder

5/8 ODF Solder

3/4 ODF Solder

7/8 ODF Solder

Length (Inches)

Inches

6.31

6.37

6.37

9.25

9.31

9.31

mm

160

162

162

235

236

236

Diameter (Inches)

Inches

2.38

2.38

2.38

3.00

3.00

3.00

mm

60.5

60.5

60.5

76.2

76.2

76.2

Saraha Series Suction Line Filter-Drier Flow Capacity

(Tons (kW) of Refrigeration at 40°F (4.4°C) Evaporator Temperature and 3 PSI (.21 bar)

Pressure Drop)

Model No.

SLD165-V

SLD166-V

SLD167-V

SLD305-V

SLD306-V

SLD307-V

Tons

2.7

3.2

3.4

3.4

4.4

4.6

R-22 kW

9.5

11.3

12

12

15.5

16.2

Tons

R-134a kW

2.0

2.5

2.6

7.0

8.8

9.1

2.2

2.8

3.0

7.7

9.9

10.6

Tons

R-407C kW

2.6

3.1

3.3

9.1

10.9

11.6

3.3

4.3

4.5

11.6

15.1

15.8

Tons

R-410A kW

3.2

3.8

4.1

11.3

13.4

14.4

4.1

5.3

5.5

14.4

18.6

19.3

Replaceable Core Shells

Parker replaceable core shells are designed to provide flexibility over a wide range of applications. All models are designed for use in both the liquid and suction line of air conditioning or refrigeration systems. In single or multiple-core applications, cores may be loaded individually for ease of installation in tight spots. A wide range of fittings for suction-line applications and interchangeable lay-in dimensions with other manufactured models increase product versatility.

The internal assembly allows the use of Parker’s Z-48, PCX-48, PCK-48 or PCK-

48HH molded cores for the removal of moisture, acid, particles, resins and wax. The assembly allows the use of the Parker PFE-48BF filter element which removes solid contaminants such as copper oxides, chips and other metal fines.


■ ■

ODF Solder fittings – 5/8" to 3-1/8"

■ ■



■ ■

Aluminum end plate with access port

■ ■

Rated 650 psig (44.8 bar) for R-410A

P969

P9611

P9613

P9617

P9621

P9625

P1449

P14411

P14413

P19211

P19213

P19217

P485

P487

P489

P4811

P4813

P4817

P4821

P967

3

4

3

3

4

2

2

2

2

2

4

1

2

1

1

2

1

1

1

1

Replaceable Core Shell Dimensions

Shell

No. of

Cores

Connection

Size & Type

(Inches)

5/8 ODF

7/8 ODF

1-1/8 ODF

1-3/8 ODF

1-5/8 ODF

2-1/8 ODF

2-5/8 ODF

7/8 ODF

1-1/8 ODF

1-3/8 ODF

1-5/8 ODF

2-1/8 ODF

2-5/8 ODF

3-1/8 ODF

1-1/8 ODF

1-3/8 ODF

2-1/8 ODF

1-3/8 ODF

1-5/8 ODF

2-1/8 ODF

523

525

525

666

666

385

385

385

385

385

666

244

244

244

377

382

mm

232

236

241

244

15.14

15.14

15.14

15.14

15.14

20.58

20.68

20.68

26.22

26.22

26.22

Inches

9.15

9.30

9.50

9.60

9.60

9.60

9.60

14.84

15.04

A

6.00

6.00

6.00

6.00

6.00

6.00

6.00

6.00

6.00

6.00

6.00

Inches

6.00

6.00

6.00

6.00

6.00

6.00

6.00

6.00

6.00

B

152

152

152

152

152

152

152

152

152

152

152

152

152

152

152

152

mm

152

152

152

152

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

5.00

Inches

5.00

5.00

5.00

5.00

Dimensions – Inches (mm)

C D mm

127

127

127

127

Inches

5.92

6.07

6.37

6.37

mm

150

154

162

162

127

127

127

127

127

127

127

127

127

127

6.37

5.58

5.75

11.61

11.81

11.91

11.91

11.35

11.10

10.78

303

303

288

282

274

162

142

146

295

300

127

127

127

127

127

127

17.35

17.45

17.45

22.99

22.99

22.43

441

443

443

584

584

570


3.78

3.94

3.97

3.94

3.97

3.94

3.97

4.41

5.19

4.90

4.65

Inches

3.50

3.72

3.78

3.94

3.97

4.41

5.19

3.72

3.78

E

96

100

101

100

101

100

101

112

132

124

118

101

112

132

94.5

96

mm

88.9

94.5

96

100

4.75

4.75

4.75

4.75

4.75

4.75

4.75

4.75

4.75

4.75

4.75

Inches

4.75

4.75

4.75

4.75

4.75

4.75

4.75

4.75

4.75

F

121

121

121

121

121

121

121

121

121

121

121

121

121

121

121

121

mm

121

121

121

121

D

F

C

E

B

A


Replacement Filter Element and Cores

Z-48 Super High Capacity Core

Recommended for use with POE lubricants. The Z-48 has three times the moisture capacity of standard cores to handle the water-absorbing tendencies of POE lubricants. Should be used in applications where there are elevated levels of moisture.

For use in the liquid or suction line.

PCX-48 High Capacity Gold Label Core

For use in either liquid or suction line applications, the PCX-48 offers added moisture capacity and good acid capacity when compared to the PCK-48 core.

PCK-48 Clean-up Core

For use in either liquid or suction line applications, the PCK-48 is specifically formulated for burnouts where wax is not the issue. It’s formulation allows for superior clean-up of acids, varnishes, sludge and moisture.

PCK-48HH Charcoal Burnout Core

Formulated with charcoal to remove wax on low temperature systems even before problems occur. The PCK-48HH can be used in either liquid or suction line applications and also removes acids, water, solids and sludge. Recommended for refrigerant reclaim/recovery units.

PFE-48BF Parker Filter Element

For use in filtering out solid contaminants. Suitable for bi-directional applications, this filter features low pressure drop and filtration capabilities down to 20 microns.

It is also interchangeable with other manufacturers’ filters.


Replacement Filter Element and Cores

P485

P487

P489

P4811

P4813

P4817

P4821

P967

P969

P9611

P9613

P9617

P9621

P9625

P1449

P14411

P14413

P14417

P19211

P19213

P19217


Core Model

PCX-48

PCK-48HH

PCK-48

Z-48

75°F (24°C)

697

R-22

(60 ppm)

125°F (52°C)

524

474

549

1659

322

386

1433

75°F (24°C)

762

R-134a

(50 ppm)

125°F (52°C)

591

518

600

1814

363

435

1614


Liquid Line Selection Recommendations – Tons (kW)

Shell

No. of

Cores

2

2

2

2

2

2

1

2

1

1

1

1

1

1

4

4

4

3

3

3

3

Connection

Size and

Type

5/8 ODF

7/8 ODF

1-1/8 ODF

1-3/8 ODF

1-5/8 ODF

2-1/8 ODF

2-5/8 ODF

7/8 ODF

1-1/8 ODF

1-3/8 ODF

1-5/8 ODF

2-1/8 ODF

2-5/8 ODF

3-1/8 ODF

1-1/8 ODF

1-3/8 ODF

1-5/8 ODF

2-1/8 ODF

1-3/8 ODF

1-5/8 ODF

2-1/8 ODF

R-404A, R-507A

(50 ppm)

75°F (24°C)

766

125°F (52°C)

584

521

604

1823

359

430

1596

75°F (24°C)

534

R-407C

(50 ppm)

125°F (52°C)

392

363

420

1270

241

288

1070


Refrigeration Low Temp.

& Commercial Installations

Field Replacement

& Field Installations

OEM / Self Contained

Equipment

R-134a R-22

R-404A,

R-507

R-134a

R-22, R-407C

R-410A

R-404A,

R-507

R-134a

R-22, R-407C

R-410A

R-404A

R-507

Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW

8 28.1

10 35.2

8 28.1

8 28.1

10 35.2

8 28.1

10 35.2

15 52.8

10 35.2

12 42.2

15 52.8

10 35.2

11 38.7

14 49.2

10 35.2

13 45.7

20 70.3

13 45.7

12 42.2

15 52.8

10 35.2

13 45.7

17 59.8

10 35.2

15 52.8

25 87.9

15 52.8

13 45.7

20 70.3

13 45.7

13 45.7

20 70.3

13 45.7

15 52.8

25 87.9

15 52.8

15 52.8

20 70.3

15 52.8

15 52.8

20 70.3

15 52.8

20 70.3

27 95 20 70.3

20 70.3

25 87.9

20 70.3

20 70.3

25 87.9

20 70.3

22 77.4

30 106 22 77.4

20 70.3

25 87.9

20 70.3

20 70.3

25 87.9

20 70.3

22 77.4

30 106 22 77.4

20 70.3

25 87.9

15 52.8

20 70.3

25 87.9

15 52.8

20 70.3

35 123 20 70.3

25 87.9

35 123 20 70.3

25 87.9

33 116 20 70.3

25 87.9

40 141 25 87.9

30 106 35 123 25 87.9

30 106 35 123 25 87.9

30 106 45 158 30 106

35 123 40 141 30 106 35 123 40 141 30 106 35 123 50 176 35 123

40 141 45 158 35 123 40 141 45 158 35 123 40 141 55 193 40 141

40 141 45 158 35 123 40 141 45 158 35 123 40 141 55 193 40 141

45 158 50 176 40 141 45 158 50 176 40 141 45 158 60 211 45 158

30 106 40 141 30 106 30 106 40 141 30 106 35 123 55 193 35 123

40 141 50 176 35 123 40 141 50 176 35 123 40 141 65 229 40 141

50 176 50 176 40 141 45 158 55 193 40 141 45 158 70 246 45 158

60 211 50 176 45 158 50 176 60 211 45 158 50 176 80 281 50 176

50 176 70 246 45 158 50 176 70 246 45 158 50 176 80 281 50 176

60 211 80 281 55 193 60 211 80 281 55 193 60 211 100 352 60 211

65 229 85 299 60 211 65 229 85 299 60 211 65 229 100 352 65 229

Suction Line Selection Recommendations – Horsepower (kW)

Shell

No. of

Cores

Connection

Size and

Type

Core

Part

Number

Filter

Element

Part No.

Refrigerant 22 & 407C

Permanent Installation with Cores

Temporary Installation

Cores for cleanup;

Filter elements after cleanup

Refrigerant 12, 134a, 404A, 502, 507

Permanent Installation with Cores

Temporary Installation

Cores for cleanup;

Filter elements after cleanup

P485

P487

P489

P4811

P4813

P967

P969

P9611

P9613

P1449

P14411

P14413

P19211

P19213

P19217

3

4

3

3

4

2

2

2

2

1

1

1

1

1

4

5/8 ODF

7/8 ODF

1-1/8 ODF

1-3/8 ODF

1-5/8 ODF

7/8 ODF

1-1/8 ODF

1-3/8 ODF

1-5/8 ODF

1-1/8 ODF

1-3/8 ODF

1-5/8 ODF

1-3/8 ODF

1-5/8 ODF

2-1/8 ODF

PCK-48HH or

PCK-48

PFE-48BF

15

25

25

25

25

10

15

20

20

25

HP

10

10

10

10

10

7.5

11.2

14.9

14.9

11.2

18.6

18.6

18.6

18.6

18.6

kW

7.5

7.5

7.5

7.5

7.5

20

35

35

40

40

10

20

30

30

40

HP

10

10

20

20

20

7.5

14.9

22.4

22.4

14.9

26.1

26.1

29.8

29.8

29.8

kW

7.5

7.5

14.9

14.9

14.9

7-1/2

12

12

12

12

10

10

5

8

12

HP

5

5

3

3

5

5.6

9.0

9.0

9.0

9.0

3.7

6.0

7.5

7.5

9.0

kW

2.2

2.2

3.7

3.7

3.7

10

15

15

20

20

5

10

15

15

20

HP

10

10

5

5

10

3.7

7.5

11.2

11.2

7.5

11.2

11.2

14.9

14.9

14.9

kW

3.7

3.7

7.5

7.5

7.5


Filters and Pre-Filters

Parker provides a large selection of components for recovery, recycle and reclaim machines, protecting them from the many types of contaminants that are encountered during the servicing of systems.

PF Series

The PF 052 and PF 052MF are designed to provide a filtration level of 15 microns.

When installed on the inlet of your machine it can prevent costly damage by filtering solid contaminants out of the refrigerant before it enters your machine. The

Parker pre-filter is for temporary use only and should be changed after servicing a maximum of six to eight systems. Change out may be needed sooner depending on actual system conditions. Various fitting combinations are available.


■ ■

Female outlet fitting allows direct mounting to the machine

■ ■

Extended female end fitting provides valve handle clearance

■ ■

Male-to-male fittings allow connection to, or between, hoses

■ ■

Enlarged depth filtering area

■ ■

UL listed

Dimensions

Model

PF 052

PF 052MF

Inlet Fitting

(Inches)

Outlet Fitting

(Inches)

1/4 SAE male flare 1/4 SAE male flare

1/4 SAE male flare 1/4 SAE female flare

Inches

4.38

5.02

Overall Length mm

111

128

Inches

2.38

2.38

Shell Diameter mm

60.5

60.5

SPD Series

The SPD series is an enlarged version of the PF Series with drying capabilities.

This Super Pre-Filter-Drier should be installed at the inlet of the machine and used where there are concentrations of contaminants in the refrigerant. Moisture capacity of this unit size exceeds anything else currently available in the market. The Super

SPD series is the ideal solution when transferring large amounts of refrigerant for reclaim or recycle.


■ ■

Super high capacity for acid and moisture removal

■ ■

Removes 504 (25.2 grams) drops of moisture vs. industry standard of 150 (7.5 grams) drops

■ ■

Available with either 1/4” SAE or 3/8” SAE flare connections

■ ■

Compatible with all HCFC, CFC and other refrigerants and blends

Dimensions

Model

SPD-162

SPD-162MF

SPD-163

302V

304V

Inlet Fitting

(Inches)

Outlet Fitting

(Inches)


1/4 SAE male flare 1/4 SAE female flare



1/2 ACME 1/2 ACME

Inches

8.00

8.64

8.44

9.28

9.28

Overall Length mm

203

219

214

236

236

Inches

2.50

2.50

2.50

3.00

3.00

Shell Diameter

The 302V and 304V are slightly bigger shells when compared to the SPD for additional water capacity.

mm

63.5

63.5

63.5

76.2

76.2


Oil Vapor Drier Separator and Steel Muffler

Oil Vapor Drier Separator

The Parker Vapor Drier Separator (VDS Series) removes contaminated oil from a system in addition to solids, acid and moisture. A 1/4" SAE oil drain access fitting is located on the bottom to provide a continuous means of measuring the amount of oil removed from a system, thereby indicating the amount needed to be replaced.

The VDS holds up to four ounces of oil and is reusable for up to 50 pounds (22.7 kg) of refrigerant, depending upon contamination levels. For rigid or secure mounting, a side bracket is welded to the body. The VDS can also be hung from a manifold gauge set with the wire strap provided. A model is available with coalescing element for improved oil separation.


■ ■

Oil removal drain fitting

■

■ ■

■ ■

■

Acid and moisture removal

3/8" SAE male flare fittings

Inlet access valve fitting

■ ■

Mounting bracket

Dimensions

REF.

2.28

.25 DIA. REF.

7.60

2.00

REF.

2.01 REF.

.31 DIA.

REF.

3.76

1.75 REF.

.63

REF.

2.50

O.D.

2.65

MAX. OVER WELD

2.13

REF.

1.63

Steel Muffler

Parker’s aftermarket steel muffler (P/N: PM3083-5-4C) is designed to assist with compressor related difficulties, such as noise reduction due to compressor pulsation and/or turbulent gas flow or vibration through the discharge line.

Features

■ ■

UL/CSA listed for 600 psig (41.4 bar) design pressure for R-410A

■ ■

1/2 ODF Solder

■ ■

Fully welded construction

■ ■

Bi-directional flow

■ ■

Powder coated paint gives maximum corrosion resistance of 500 hour salt spray protection

■ ■

Muffler utilizes 3.0 inch (76.2 mm) diameter shell and is 9.13 inches (232 mm) in length


Granular Copper Filter-Driers – OEM

Parker’s granular copper filter-driers adsorb moisture and provide physical filtration in systems between 1/4 and 2 tons (.9 to 7.0 kW). Applications include refrigerators, freezers, ice makers, dispensers, water coolers, cryogenics and walk-ins.

Applications

■ ■

Refrigeration systems between 1/4 and 2 tons (.9 to 7.0 kW)


■ ■

One-piece copper shells in 3/4" to 1" O.D.

(19.1 to 25.4 mm), spun ODF solder connections in a variety of sizes, provide easy installation, simple brazing, and corrosion resistance

■ ■

Up to 30 grams of 100% molecular sieve provide maximum water adsorption

■ ■

Filter-driers also available with standard charging tubes, SAE flare fittings, steppedtubes on the inlet/outlet, and coiled capillary or bent tubing to match the unique requirements of a unit

3/4" O.D. Shell Diameter – Specifications

Part No.

Maximum Rated Pressure

PSIG* bar

Inlet

(Inches)

032099-00

032159-00

032200-00

032169-00

360

360

500

360

24.8

24.8

34.5

24.8

.164

.159/.258

.253

.164

.159

.195

.190

.197

.192

* Filter-driers are available with higher working pressures for R-410A.

Outlet

(Inches)

.091

.086

.091

.086

.081

.076

.092

.087

Overall Length

Inches mm

4.63

4.50

4.37

4.75

118

114

111

121

Inlet Outlet

Recommended tonnages: 1/4 to 2 tons (.9 to 7.0 kW) depending on application and system. Consult

Parker.

3/4" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at ARI-710 Conditions

Part No.

032099-00

032159-00

032200-00

032169-00

R-22 (60 ppm) R-134a (50 ppm)


R-404A, R-507 (50 ppm) R-407C (50 ppm) R-410A (50 ppm)


29.8

27.4

32.6

31.0

32.8

30.6

26.2

23.6

19.8

17.4

29.8

25.3

29.8

27.4

23.3

27.4

32.6

27.7

32.6

31.0

26.4

31.0

32.8

27.9

32.8

One and two inlets are available as well as cap tube sizes on outlet from .081 to .125.


30.6

26.0

30.6

26.2

22.3

26.2

23.6

20.1

23.6

19.8

16.8

19.8

17.4

14.8

17.4

1" O.D. Shell Diameter Copper Filter-Drier Data

Part No.

032083-00

058066-00

057404-00


PSIG* bar

500

500

500

34.5

34.5

34.5

Inlet

(Inches)

.250

.244

.380

.377/.256

.253

.320

.315


Outlet

(Inches)

.098

.093

.195

.190

.320

.315

Overall Length

Inches mm

4.00

4.19

3.81

102

106

97

Inlet Outlet

Recommended tonnages (part numbers 032083-00

and 058066-00): 1/4 to 1/2 tons (.9 to 1.8 kW) depending on application and system. Consult Parker.

Recommended tonnages (part number 057404-00):

R-22 = 2 (7.0 kW)

R-507 = 1.3 (4.6 kW)

R-134a = 2 (7.0 kW)

R-404A = 1.3 (4.6 kW) R-410A = 2 (7.0 kW)

1" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at ARI-710 Conditions

Part No.

032083-00

058066-00

057404-00

R-22 (60 ppm) R-134a (50 ppm)


R-404A, R-507 (50 ppm) R-407C (50 ppm) R-410A (50 ppm)


N/R

44.7

54.7

N/R

41.1

50.6

40.3

48.9

59.8

37.7

46.5

57.0

N/R

49.2

59.5

N/R

45.9

56.0

N/R

39.3

41.9

N/R

35.4

37.8

N/R

29.7

32.3

N/R

26.1

28.8

N/R = not recommended. Consult Parker for more information.



Spring-Loaded Copper Filter-Driers – OEM

Parker’s spring-loaded granular copper filter-driers adsorb moisture and provide physical filtration to air conditioning and heat-pump systems between 1/4 and 5 tons (.9 and 17.6 kW). Filter-driers utilize spring-loaded desiccant bed to prevent desiccant attrition.

Application

■ ■

Up to 90 grams of 100% molecular sieve provide maximum water adsorption

■ ■

Air conditioning and heat pump systems between 1/4 and 5 tons (.9 and 17.6 kW)


■ ■

Filter-driers also available with standard charging tubes, SAE flare fittings, steppedtubes on the inlet/outlet, and coiled capillary or bent tubing to match the unique requirements of a unit

■ ■

One-piece copper shells in 1" to 1-5/8" O.D.

(25.4 to 41.3 mm), along with spun ODF solder fittings in a variety of sizes, provide easy installation, simplified brazing and corrosion resistance

■ ■

Filter-driers are available with a fiberglass pad for improved filtration – removes down to 20 micron sized particles

1" O.D. Shell Diameter – Specifications

Part No.


PSIG* bar

Inlet

(Inches)

Outlet

(Inches)

Overall Length

Inches mm

032231-00

500 34.5

.202

.192/.381

.378

.133

.128

4.25

108

054625-01

056242-03

053817-01

500

500

500

34.5

34.5

34.5

.256

.253

.383

.378

.378

.383


.256

.253

.383

.378

.378

.383

4.38

4.38

5.69

111

111

145

Flow Capacity – Tons @ 1psi ∆P (kW @ 0.07 bar ∆P)

Part No.

R-22 R-134a R-404A R-407C R-410A R-507

Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW

032231-00

054625-01

056242-03

053817-01

Recommended Tonnages: 1/2 to 1 tons (1.8 to 3.5 kW) depending on application and system. Consult Parker.

1.5

5.3

1.6

5.6

1.2

3.6

12.7

3.3

11.6

2.4

3 10.6

2.7

9.5

2

4.2

8.4

7.0

1.4

3.5

2.9

4.9

12.3

10.2

1.7

3.5

2.9

6.0

12.3

10.2

1.2

4.2

2.3

2

8.1

7.0

Inlet Outlet

1" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at ARI-710 Conditions

Part No.

032231-00

054625-01

056242-03

053817-01


R-22 (60 ppm) R-134a (50 ppm) R-404A, R-507 (50 ppm) R-407C (50 ppm) R-410A (50 ppm)


29.8

46.2

27.4

42.7

32.6

50.5

31.0

48.1

32.8

50.2

30.6

47.3

26.2

49.4

23.6

44.8

19.8

27.3

17.4

24.3

46.2

85.5

42.7

79.0

50.5

93.5

48.1

89.0

50.2

93.0

47.3

87.5

49.4

91.5

44.8

83.0

27.3

50.5

24.3

45.0

One and two inlets are available as well as cap tube sizes on outlet from .125 to .50. All 1" (25.4 mm) filter-driers are U.L. recognized components, File #SA8570.

Tonnage (kW) ratings will vary depending on the inlet and outlet requested.




1-3/16" O.D. Shell Diameter – Specifications

Part No.

056243-04


PSIG* bar

500 34.5

Inlet

(Inches)

.508

.503

056243-03

500 34.5

.383

.378

053776-00

540 37.2

.384

.378

Outlet

(Inches)

.508

.503

.383

.378

.384

.378

Overall Length

Inches mm

5.13

130

5.13

7.00

130

178

Inlet Outlet



Part No.

056243-04

056243-03

053776-00

R-22 R-134a R-404A, R-507 R-407C R-410A R-507


4.8

16.9

4.4

15.5

3.1

10.9

4.6

16.2

4.7

16.5

3.1

10.9

3.6

12.7

3.3

11.6

2.3

8.1

3.5

12.3

3.5

12.3

2.3

8.1

3.7

13 3.4

12 2.4

8.4

3.6

12.7

3.6

12.7

2.4

8.4

1-3/16" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at ARI-710 Conditions

Part No.

056243-04

056243-03

053776-00

R-22 (60 ppm)


85.5

85.5

153.9

79.0

79.0

142.2

R-134a (50 ppm)

93.5

93.5

168.3

89.0

89.0

160.2


R-404A, R-507 (50 ppm)

93.0

93.0

167.4

87.5

87.5

157.5

R-407C (50 ppm)

65.5

65.5

117.9

59.0

59.0

106.2

R-410A (50 ppm)

50.5

50.5

90.9

45.0

45.0

81.0

One and two inlets are available as well as cap tube sizes on outlet from .125 to .50. All 1-3/16" (30.2 mm) driers are U.L. recognized components, File #SA8570.



1-5/8" O.D. Shell Diameter – Specifications

Part No.


PSIG* bar

Inlet

(Inches)

032040-00

500 34.5

.383

.378

032145-00

031805-03

056244-01

056156-01

500

500

500

500

34.5

34.5

34.5

34.5

.383

.378

.383

.378

.383

.378

.253

.256

Outlet

(Inches)

.383

.378

.383

.378

.383

.378

.383

.378

.253

.256

Overall Length

Inches mm

6.00

152

4.38

5.50

5.38

7.00

111

140

137

178

Inlet

* Filter-driers are available with higher design pressures for R-410A.


Part No.

032040-00

032145-00

031805-03

056244-01

056156-01

R-22 R-134a R-404A, R-507 R-407C R-410A R-507


5.8

4.7

20.4

16.5

5.3

4.3

18.6

15.1

3.8

3.1

13.4

10.9

5.6

4.5

19.7

15.8

5.7

4.6

20

16.2

3.8

3.1

13.4

10.9

5.1

5

17.9

17.6

4.7

4.5

16.5

15.8

3.3

3.2

11.6

11.3

4.9

4.8

17.2

16.9

5

4.8

17.6

16.9

3.3

3.2

11.6

11.3

1.8

6.3

1.6

5.6

1.2

4.2

1.7

6.0

1.7

6.0

1.2

4.2

Outlet



1-5/8" O.D. Shell Diameter – Water Capacity In Drops (Grams*) at ARI-710 Conditions

Part No.

032040-00

032145-00

031805-03

056244-01

056156-01


153.9

142.2

168.3

160.2

167.4

157.5

117.9

106.2

90.9

81.0

83.4

119.7

153.9

307.8

R-22

(60 ppm)

76.7

110.6

142.2

284.4

91.3

130.9

168.3

336.6

R-134a

(50 ppm)

86.8

124.6

160.2

320.4


R-404A, R-507

91.8

130.2

167.4

334.8

(50 ppm)

85.7

122.5

157.5

315.0

73.4

91.7

117.9

235.8

R-407C

(50 ppm)

66.1

82.6

106.2

212.4

55.4

70.7

90.9

181.8

R-410A

(50 ppm)

48.7

63.0

81.0

162.0

One and two inlets are available as well as cap tube sizes on outlet from .125 to .50. All 1-3/16" (30.2 mm) driers are U.L. recognized components, File #SA8570.



CBF Bi-Flow Copper Filter-Driers – OEM

Parker’s bi-flow copper filter-driers provide system protection of contaminants for heat-pumps between 1-1/2 and 4-1/2 tons (5.3 and 15.8 kW).

Application

■ ■

Heat pump systems between 1-1/2 and

4-1/2 tons (5.3 and 15.8 kW)

Base Product Part

Number

■ ■

CBF


■ ■

One-piece copper shell with 2" (51mm)

O.D., along with spun ODF fittings in a variety of sizes, provides easy installation

■ ■

100% molecular sieve molded core for maximum water capacity

■ ■

Copper construction offers excellent corrosion resistance in harsh environments

Copper Bi-Flow Filter-Drier – Dimensions

Part No.

032284-052

032284-053

032284-082

032284-083

032284-084

032284-085

Fitting Type

(Inches)

1/4 ODF Solder

3/8 ODF Solder

1/4 ODF Soldert

3/8 ODF Solder

1/2 ODF Solder

5/8 ODF Solder

Overall Length

Inches mm

7.04

7.04

179

179

7.98

7.98

7.98

7.98

203

203

203

203

All of these driers have a .01 - .02 tube stop in the inlet and outlet.

Shell Diameter

Inches mm

2.00

2.00

51

51

2.00

2.00

2.00

2.00

51

51

51

51

Liquid Capacity in Ounces (Grams) @ 100°F (38°C)

Part No. Series

032284-050

032284-080

R-22 R-134a R-404A, R-507 R-407C R-410A

Ounces grams Ounces grams Ounces grams Ounces grams Ounces grams

6.47

8.18

183

232

6.55

8.28

186

235

5.55

7.02

157

199

6.12

7.73

173

219

5.64

7.13

160

202


Part No.

Series

R-22

(60 ppm)

R-134a

(50 ppm)

R-404A ,R-507

(50 ppm)

R-407C

(50 ppm)

R-410A

(50 ppm)

032284-050

032284-080


129

207


112

180

141

226

127

202

141

225

124

199

101

161

84

134

81

129

64

102

CLIMATE CONTROL

■

■

■ ■

■

A ccumulators

■

CO

2 controls

Electronic controllers

■ ■

Filter-driers

■ ■

Hand shut-off valves

■ ■

Heat exchangers

■ ■

Hose & fittings

■ ■

Pressure regulating valves

■ ■

Refrigerant distributors

■ ■

Safety relief valves

■ ■

Solenoid valves

■ ■

Thermostatic expansion

valves

AEROSPACE

■■

Flight control systems & components

■■

Fluid conveyance systems

■■

Fluid metering delivery & atomization devices

■■

Fuel systems & components

■■

Hydraulic systems & components

■■

Inert nitrogen generating systems

■■

Pneumatic systems & components

■■

Wheels & brakes

ELECTROMECHANICAL

■■

AC/DC drives & systems

■■

Electric actuators, gantry robots

& slides

■■

Electrohydrostatic actuation systems

■■

Electromechanical actuation systems

■■

Human machine interfaces

■■

Linear motors

■■

Stepper motors, servo motors, drives & controls

■■

Structural extrusions

FILTRATION

■■

Analytical gas generators

■■

Compressed air & gas filters

■■

Condition monitoring

■■

Engine air, fuel & oil filtration & systems

■■

Hydraulic, lubrication & coolant filters

■■

Process, chemical, water & microfiltration filters

■■

Nitrogen, hydrogen & zero air generators

FLUID & GAS HANDLING

■

Brass fittings & valves

■

Diagnostic equipment

■

Fluid conveyance systems

■

Industrial hose

■

PTFE & PFA hose, tubing & plastic fittings

■

Quick disconnects

■

Rubber & thermoplastic hose

& couplings

■

Tube fittings & adapters

HYDRAULICS

■■

Diagnostic equipment

■■

Hydraulic cylinders & accumulators

■■

Hydraulic motors & pumps

■■

Hydraulic systems

■■

Hydraulic valves & controls

■■

Power take-offs

■■

Quick disconnects

■■

Rubber & thermoplastic hose & couplings

■■

Tube fittings & adapters

PNEUMATICS

■■

Air preparation

■■

Brass fittings & valves

■■

Manifolds

■■

Pneumatic actuators, grippers, valves, controls & accessories

■■

Quick disconnects

■■

Rotary actuators

■■

Rubber & thermoplastic hose & couplings

■■

Structural extrusions

■■

Thermoplastic tubing & fittings

■■

Vacuum generators, cups & sensors

PROCESS CONTROL

■■

Analytical sample conditioning products & systems

■■

Fluoropolymer chemical delivery fittings, valves & pumps

■■

High purity gas delivery fittings, valves

& regulators

■■

Instrumentation fittings, valves & regulators

■■

Medium pressure fittings & valves

■■

Process control manifolds

SEALING & SHIELDING

■■

Dynamic seals

■■

Elastomeric o-rings

■■

EMI shielding

■■

Extruded & precision-cut, fabricated elastomeric seals

■■

Homogeneous & inserted elastomeric shapes

■■

High temperature metal seals

■■

Metal & plastic retained composite seals

■■

Thermal management

102007 / Catalog A-1

Parker Hannifin Corporation

Climate and Industrial Controls Group

2445 South 25th Avenue • Broadview, IL 60155-3891 USA phone 800 742 2681 • fax 800 241 2872 www.parker.com/coolparts

Parker Hannifin 450025-001 BF Series 16 cu in. Bi-Flow Filter Drier Specification

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding

Filter-Driers

Catalog A-1, October 2007

Table of Contents

Filter-Driers

Introduction to Filter-Driers

Introduction to Filter-Driers

Copper Service Filter-Driers

Copper Service Filter-Driers

Cu LLD

®

Series Molded Core Copper Filter-Driers

Gold Label Steel Liquid Line Filter-Driers

Gold Label Steel Liquid Line Filter-Driers

Gold Label Steel Liquid Line Filter-Driers

Sahara Series™ Liquid Line Filter-Driers

Steel Bi-Flow Filter-Driers – BF Series

Gold Label Steel Suction Line Filter-Driers

Steel Suction Line Filter-Drier

Sahara Series™ Suction Line Filter-Driers

Replaceable Core Shells

Replacement Filter Element and Cores

Replacement Filter Element and Cores

Filters and Pre-Filters

Oil Vapor Drier Separator and Steel Muffler

Steel Muffler

Granular Copper Filter-Driers – OEM

Spring-Loaded Copper Filter-Driers – OEM

Spring-Loaded Copper Filter-Driers – OEM

Spring-Loaded Copper Filter-Driers – OEM

CBF Bi-Flow Copper Filter-Driers – OEM

CLIMATE CONTROL

A ccumulators

CO

2 controls

Electronic controllers

Filter-driers

Hand shut-off valves

Heat exchangers

Hose & fittings

Pressure regulating valves

Refrigerant distributors

Safety relief valves

Solenoid valves

Thermostatic expansion

valves

Related manuals

Parker Hannifin

450144-001

White Rodgers

96-TS085S

Waterstone

10124

Danfoss

TU

Danfoss

Tube-in-tube heat exchanger, type HE

Danfoss

HE 1.0

Parker Hannifin

3SSBF3S

Danfoss

DAS

Danfoss

DAS

T & S Brass & Bronze Works

CW-4B-60C

T & S Brass & Bronze Works

CW-4B-60T

T & S Brass & Bronze Works

CW-4A-60T

Table of contents