PONA 3000 Series Erbium Doped Fiber Amplifier APPLICATIONS

PONA 3000 Series Erbium Doped Fiber Amplifier APPLICATIONS
PONA 3000 Series
Erbium Doped Fiber Amplifier
APPLICATIONS
•
•
•
•
High Performance Supertrunking Links
High Power Distribution Networks
Fiber Deep Architectures
FTTx Networks
FEATURES
• Full Function High Power Fiber Optic Amplifier
Ready for Integration
• Low Noise Figure (Typ < 6 dB)
• Total Input Power Range: –10 dBm to +12 dBm
• Total Output Power: +27 dBm to +35 dBm (Optical
Output Power Splitter is Optional For These Units)
• Standard RS-232 Communications
• Low Electrical Power Consumption
• Input / Output Isolation > 40/40 dB
• Polarization Dependant Gain < 0.1 dB
• Polarization Mode Dispersion < 0.5 ps
The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an
ideal building block for OEM system integrators. The family of PONA
3000 Optical Amplifiers is designed to meet the most demanding noise
performance requirements of CATV and FTTx applications, and performs all the functions required of an optical amplifier for system integration. Packaged in a convenient 2RU housing, the PONA 3000
series optical amplifiers provide optical isolation on the input and output of the gain block for stable, low noise operation. The input and output optical signal power levels are detected for monitoring and control.
The input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode. The PONA 3000 series optical amplifiers also provide
monitoring functions and associated alarms for all vital characteristics.
The optical output of the PONA 3000 series optical amplifiers can be
split into a number of ports by an optional internal splitter.
PONA3000 series includes AC/DC power supply, front panel, optical
splitters, network card and all necessary connectors.
Sample FTTx Architecture
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543
l
info@tonercable.com
PONA 3000 Series
Erbium Doped Fiber Amplifier
SPECIFICATIONS
Notes:
1) Unless stated otherwise all specifications apply over the full temperature range and humidity
2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value
3) Measured @ 25°C, EPin = 0 dBm
4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C
6) Stability over polarization and temperature
7) Premium version – PONA with cooled, Telcordia qualified pumps
Economy version – PONA with uncooled pumps
PHYSICAL
Specifications Subject To Change Without Notice
969 Horsham Road
l
©Toner Cable Equipment, Inc.
Rev 10-11
Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543
l
info@tonercable.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising