connecDIM Gateway G1 en

connecDIM Gateway G1 en
luxCONTROL lighting control system
connecDIM
connecDIM Gateway G1
Ethernet TCP/IP to DALI
Product description
•Independent lighting control for up to 256 DALI gears on 4 DALI
lines
•Can be expanded by connecting multiple gateways on the same
network
•Cloud based web interface for configuration and monitoring
•Simple setup via mobile App or Cloud service
•Status LED for indication the operating status
•Connects to Tridonic DALI Interface RS232 PS/S (22176712)
•Works with Tridonic DALI comfortDIM portfolio
•Cross DALI line control with DALI XC, DALI touchPANEL and
DALI MSensor
•Freely programmable daily scheduling with calendar function
•DALI emergency lighting unit test scheduling and monitoring via
the connecDIM Cloud
•Cloud based maintenance, email alerts, predictive warnings and
visual monitoring
•Open JSON-RPC TCP control protocol for linking to building
automation systems
Data sheet 10/15-CO075-6
Subject to change without notice.
www.tridonic.com
1
luxCONTROL lighting control system
connecDIM
connecDIM Gateway G1
Ethernet TCP/IP to DALI
Technical data
4 x RJ45 Serial Ports
Ethernet port
1 x 10/100 Mbit/s
Status indicators LED
Power, Ready, Ethernet, Serial Port
Operating Temperature
0 ... +70°C
Mounting
Tabs with screw terminals; DIN rail kit
available
Casing Material
Fanless metal casing
Type of Protection
IP20
108
3.6 W (300 mA @ 12 V DC)
DALI interface RS232 PS/S ports
48
Power consumption
100
25
9 – 48 V
24
Rated supply voltage DC
78
Ordering data
Type
Article number
Packaging carton
Weight per pcs.
connecDIM Gateway G1
28000966
1 pc(s).
0.405 kg
Data sheet 10/15-CO075-6
Subject to change without notice.
www.tridonic.com
2
ACCESSORIES
luxCONTROL lighting control system
connecDIM
DALI Interface RS232 PS/S
Product description
•Combines interface module and DALI power supply
•Integrated power supply with 240 mA for DALI devices or DALI
control modules without power supply
•Interface module for connection of DALI systems with computer or
programmable control systems
•For installation in switching cabinets
•5-year guarantee
110 – 240 V
Permitted input voltage
110 – 260 V
Mains frequency
50 / 60 Hz
Power
1–6W
Standby power
1W
Max. output current, DALI
240 mA
Output voltage
16 V ±5 %
Operating temperature
0 ... +50 °C
Storage temperature
-20 ... +60 °C
Max. casing temperature tc
80 °C
Permitted relative humidity
10 – 90 %, not condensed
Mounting
DIN rail mounting, 35 mm
Casing material
PC, flame retardant, halogen-free
Type of protection
IP20
91
59
Rated supply voltage
35
Technical data
35
Ordering data
Type
Article number
Packaging, carton
Weight per pc.
DALI Interface RS232 PS/S
22176712
15 pc(s).
0.09 kg
Specific technical data
Type
DALI Interface RS232 PS/S
Data sheet 10/15-CO075-6
Subject to change without notice.
www.tridonic.com
Input RS232
DALI output
1
1
3
ACCESSORIES
luxCONTROL lighting control system
connecDIM
connecDIM RS232 cable
Product description
•Connection cable 1 m for connection of a DALI Interface RS232
PS/S (22176712) to the connecDIM Gateway G1
•RJ45 to RJ45
ACCESSORIES
Ordering data
Type
Article number
Length
Packaging carton
Weight per pcs.
connecDIM RS232 cable
28000968
1m
1 pc(s).
0.06 kg
connecDIM DIN-RAIL Mounting Kit
Product description
•DIN-RAIL Mounting Clips to mount the connecDIM Gateway G1 onto
a 35 mm DIN-RAIL
Ordering data
Type
Article number
Packaging carton
Weight per pcs.
connecDIM DIN-RAIL Mounting Kit
28000969
1 pc(s).
0.03 kg
Data sheet 10/15-CO075-6
Subject to change without notice.
www.tridonic.com
4
ACCESSORIES
luxCONTROL lighting control system
connecDIM
mains adapter x-touchPANEL
Product description
•Power supply for the DALI x-touchPANEL and
the DALI e-touchPANEL
•The mains adapter is rated at 36 V
•Max. 2 gateways can be connected
Technical data
Rated supply voltage
230 – 240 V
Mains frequency
50 / 60 Hz
Max. power consumption
10 W
Output voltage
36 V
Max. output current
300 mA
Ambient temperature ta
0 ... +50 °C
Type of protection
IP20
Ordering data
Type
Article number
Packaging carton
Weight per pcs.
mains adapter x-touchPANEL
24166012
1 pc(s).
0.155 kg
Data sheet 10/15-CO075-6
Subject to change without notice.
www.tridonic.com
5
luxCONTROL lighting control system
connecDIM
10/100 Mbp/s Ethernet
Standards
EN 61347-1
EN 61347-2-11
EN 60950-1
EN 55022
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
EN 61000-6-2
EN 50581
Don't connect
9–48 V DC Power
Reset
Don't connect
–
+
9-48V DC
Don't connect
Ethernet
RESET
Don't connect
Power
Ready
connecDIM Gateway G1
Link
Art-No.: 28000966
Don't connect
www.tridonic.com
LED
Power LED
System Ready LED
Ethernet LED
Don't connect
Made in Taiwan
Wire preparation:
0.5 - 2.5 □
Ready LED
After Power ON, the gateway starts booting. Once the system has booted up, the
Ready LED will show solid green.
7 - 8 mm
ta: 0 ... +70 °C
H000
V0.0
0000
000000
XX-XX-XX-XX-XX-XX
Line 1
Line 2
Line 3
Line 4
Serial Port LED
Special cable is required. Patch cables must not be used.
Refer to the product description. Can be used only
with TRIDONIC DALI interface RS232 PS / S (22176712).
Link/Act LED
When the Ethernet port is connected to the network, Link/Act will show solid
green and if there is traffic on the Ethernet, this LED will flash.
RS232
RS232
RS232
RS232
Serial Port LED
These four dual colour LEDs indicate data traffic at the serial ports. When the
RXD line is high the green light will be ON and when the TXD line is high the
yellow light will be ON.
Linie 1 – Linie 4
Serial Ports
Power Connector
Connect the 9 to 48 VDC power line to the gateway. If power is being supplied
correctly, the power LED will show solid green.
Serial Port
Serial Port Line 1 to Line 4
The four serial ports are configured to RS-232 and can be connected to
TRIDONIC DALI Interface RS232 PS/S (22176712). They use RJ45 connectors
and the pin assignment is shown in the following table.
Please note that standard patch cables should not be used! Refer also
to the product datasheet for TRIDONIC DALI Interface RS232 PS/S
(22176712). Available online at www.tridonic.com.
Please ensure that the correct RJ45 connector is connected to the gateway and
to the RS232 DALI Interface. The cables supplied are clearly marked “BOX”.
The BOX end goes to the gateway and the other end goes to DALI Interface
RS232 PS/S. If the wrong plug is used there will be no functionality.
The maximum length of this cable is 5 m.
Gateway (RJ45)
RS232 PS/S (RJ45)
Wiring:
pin 3 Ground
pin 4 Ground
pin 4 TxD
pin 5 TxD
pin 5 RxD
pin 6 RxD
pin 8 DTR (for supply purpose only)
pin 3 DTR (for supply purpose only)
pin 2 RTS (for supply purpose only)
pin 8 RTS (for supply purpose only)
RS232
8
1
8
8
1
8
connecDIM RS232 cable
1
1
Gateway
Data sheet 10/15-CO075-6
Subject to change without notice.
www.tridonic.com
6
luxCONTROL lighting control system
connecDIM
Overview
The connecDIM system consists of a single four-channel RS232 Ethernet
gateway connected to Tridonic DALI Interface RS232 PS/S and a wireless router.
This enables 4 x 64 DALI devices to be networked and this DALI circuit to be
controlled as a whole, thanks to controllers connected to the DALI circuit with
mobile devices (iOS or Android operating system), irrespective of whether T5,
T8, LED or Tunable White DALI devices are used. The system can be expanded
to more than 4 DALI lines by connecting multiple connecDIM Gateways to the
network. This allows local DALI control devices such as DALI XC or DALI
MSensors to control multiple devices on multiple DALI lines. The connecDIM system is a simple solution for providing DALI control over multiple DALI lines.
It also enables DALI system to be commissioned without having to use a laptop
or dedicated software.
Two apps are available for the connecDIM System.
connecDIM Architect, commissioning app, available for iOS and connecDIM Lite,
end-user app, available for iOS and Android.
Existing DALI applications can be simply upgraded by replacing the DALI power
supply with DALI Interface RS232 PS/S and connecting the connecDIM
Gateway. If an internet connection is used the system can be easily made
available on the connecDIM Cloud.
Safety instructions
The device may only be used for the specified area of application.
Relevant health and safety regulations must be observed.
The voltage supply must be disconnected when the device is being
assembled and installed.
Only qualified personnel may assemble, install and commission the device.
Do not use DALI Interface RS232 PS/S with any other devices that supply power
(e.g. DALI PS).
Another way to test if another power supplying device is on the DALI signal wire is
to connect:
DALI Interface RS232 PS/S to the DALI signal wire with the mains supply disconnected. If the power LED and the status LED are on (typically green) despite no
mains supply to DALI Interface RS232 PS/S then another device is supplying power
on the DALI signal wire.
Wiring type and cross section
The wiring can be solid wire, stranded wire or stranded wire with end sleeve with
a cross-section of 0.5 mm² to 2.5 mm².
wire preparation:
0.5 – 2.5 mm²
7 – 8 mm
Data sheet 10/15-CO075-6
Subject to change without notice.
www.tridonic.com
7
luxCONTROL lighting control system
connecDIM
Wiring examples
L
N
DALI
230 V
36 V
– +
Ethernet
– +
2
3
4
L N
DA DA
connecDIM
Gateway G1
DALI RS232
PS/S
1 2 3 4
RS232
DALI x/etouchPANEL
02
DALI
MSensor 02
6 DA
7 DA
DALI XC
2
3
4
Uconverter
LCAI
Uconverter
LCAU PREMIUM
DA Tunable White
6
7 DA
2
3
4
WLAN
INTERNET
EM ... PRO
6 DA
7 DA
L
N
L’
T1
T2
basicDIM DGC
DA
DALI IN
DA
L
N
230 V
DALI Line 4
(up to 64 devices)
– +
Ethernet
36 V
– +
L N
DA DA
DALI Line 3
(up to 64 devices)
L N
DA DA
DALI Line 2
(up to 64 devices)
L N
DA DA
DALI Line 1
(up to 64 devices)
L N
DA DA
DALI RS232
PS/S
DALI RS232
PS/S
DALI RS232
PS/S
DALI RS232
PS/S
1 2 3 4
RS232
RS232
RS232
RS232
– +
Ethernet
connecDIM
Gateway G1
connecDIM
Gateway G1
1 2 3 4
INTERNET
WLAN
Data sheet 10/15-CO075-6
Subject to change without notice.
www.tridonic.com
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement