BCR8LM-14LJ Datasheet

BCR8LM-14LJ Datasheet
Preliminary Datasheet
BCR8LM-14LJ
Triac
Medium Power Use
R07DS0502EJ0200
Rev.2.00
Oct 14, 2011
Features




 The Product guaranteed maximum junction
temperature 150C
 Insulated Type
 Planar Type
 UL Recognized: File No. E223904
IT (RMS) : 8 A
VDRM : 800 V (Tj=125C)
IFGTI, IRGTI, IRGT III : 30 mA
Viso: 1800V
Outline
RENESAS Package code: PRSS0003AF-A)
(Package name: TO-220FL)
2
3
1. T1 Terminal
2. T2 Terminal
3. Gate Terminal
1
1
2 3
Applications
washing machine, inversion operation of capacitor motor, and other general purpose control applications
Maximum Ratings
Parameter
Symbol
Repetitive peak off-state voltageNote1
VDRM
Non-repetitive peak off-state voltageNote1
Notes: 1. Gate open.
VDSM
R07DS0502EJ0200 Rev.2.00
Oct 14, 2011
Voltage class
14
800
700
840
Unit
Conditions
V
V
V
Tj=125C
Tj=150C
Page 1 of 7
BCR8LM-14LJ
Preliminary
Parameter
RMS on-state current
Symbol
IT (RMS)
Ratings
8
Unit
A
Surge on-state current
ITSM
80
A
I2 t
26
A2s
PGM
PG (AV)
VGM
IGM
Tj
Tstg
—
Viso
5
0.5
10
2
–40 to +150
–40 to +150
1.5
1800
W
W
V
A
C
C
g
V
I2t for fusion
Peak gate power dissipation
Average gate power dissipation
Peak gate voltage
Peak gate current
Junction Temperature
Storage temperature
Mass
Isolation voltage
Conditions
Commercial frequency, sine full wave
360conduction, Tc = 107C
60 Hz sinewave 1 full cycle, peak value,
non-repetitive
Value corresponding to 1 cycle of half
wave 60 Hz, surge on-state current
Typical value
Ta=25C, AC 1 minute,
T1T2G terminal to case
Electrical Characteristics
Parameter
Repetitive peak off-state current
On-state voltage
Symbol
IDRM
VTM
Min.
—
—
Typ.
—
—
Max.
2.0
1.6
Unit
mA
V
Test conditions
Tj = 150C, VDRM applied
Tc = 25C, ITM = 12A,
instantaneous measurement
Gate trigger voltageNote2



VFGT
VRGT
VRGT
—
—
—
—
—
—
1.5
1.5
1.5
V
V
V
Tj = 25C, VD = 6 V, RL = 6 ,
RG = 330 
Gate trigger curentNote2



IFGT
IRGT
IRGT
—
—
—
—
—
—
30
30
30
mA
mA
mA
Tj = 25C, VD = 6 V, RL = 6 ,
RG = 330 
VGD
0.2
0.1
—
10
1
—
—
—
—
—
—
—
4.3
—
—
V
V
C/W
V/s
V/s
Gate non-trigger voltage
Thermal resistance
Critical-rate of rise of off-state
commutation voltageNote4
Rth (j-c)
(dv/dt)c
Tj = 125C, VD = 1/2 VDRM
Tj = 150C, VD = 1/2 VDRM
Note3
Junction to case
Tj = 125C
Tj = 150C
Notes: 2. Measurement using the gate trigger characteristics measurement circuit.
3. The contact thermal resistance Rth (c-f) in case of greasing is 0.5C/W.
4. Test conditions of the critical-rate of decay of on-state commutation current are shown in the table below.
Test conditions
1. Junction temperature
Tj = 125C/150C
2. Rate of rise of off-state commutating voltage
(dv/dt)c = 4.0 A/ms
3. Peak off-state voltage
VD = 400 V
R07DS0502EJ0200 Rev.2.00
Oct 14, 2011
Commutating voltage and current waveforms
(inductive load)
Supply Voltage
Time
Main Current
(di/dt)c
Time
Main Voltage
(dv/dt)c
Time
VD
Page 2 of 7
BCR8LM-14LJ
Preliminary
Performance Curves
Maximum On-State Characteristics
Rated Surge On-State Current
Surge On-State Current (A)
100
Tj = 150°C
101
Tj = 25°C
100
0
1
2
3
20
101
102
Gate Characteristics (I, II and III)
Gate Trigger Current vs.
Junction Temperature
PG(AV) = 0.5W
PGM = 5W
IGM = 2A
VGT = 1.5V
100
IFGT I IRGT I, IRGT III
VGD = 0.1V
1
3
10
2
10
104
103
Typical Example
IRGT III
102
IRGT I, IFGT I
101
–40
0
40
80
120
160
Gate Current (mA)
Junction Temperature (°C)
Gate Trigger Voltage vs.
Junction Temperature
Maximum Transient Thermal Impedance
Characteristics (Junction to case)
103
Typical Example
102
101
–40
Gate Trigger Current (Tj = t°C)
× 100 (%)
Gate Trigger Current (Tj = 25°C)
Gate Voltage (V)
Gate Trigger Voltage (Tj = t°C)
× 100 (%)
Gate Trigger Voltage (Tj = 25°C)
40
Conduction Time (Cycles at 60Hz)
101
10
60
On-State Voltage (V)
VGM = 10V
10−1
80
0
100
4
0
40
80
120
Junction Temperature (°C)
R07DS0502EJ0200 Rev.2.00
Oct 14, 2011
160
Transient Thermal Impedance (°C/W)
On-State Current (A)
102
102
5
103
104
100
101
4
3
2
1
0 −1
10
102
Conduction Time (Cycles at 60Hz)
Page 3 of 7
BCR8LM-14LJ
Preliminary
No Fins
102
101
100
10−1 1
10
102
12 360° Conduction
Resistive,
10 inductive loads
8
6
4
2
0
0
105
2
4
6
8
10
12
16
14
RMS On-State Current (A)
Allowable Case Temperature vs.
RMS On-State Current
Allowable Ambient Temperature vs.
RMS On-State Current
140
120
100
80
60
40
360° Conduction
20 Resistive,
inductive loads
0
0
2
4
6
8
10
12
14
160
Ambient Temperature (°C)
Curves apply regardless
of conduction angle
120 120 t2.3
120
100 100 t2.3
100
60 60 t2.3
80
60
Curves apply
regardless of
conduction angle
Resistive,
inductive loads
Natural convection
40
20
0
0
16
All fins are black painted
aluminum and greased
140
2
4
6
8
10
12
14
16
RMS On-State Current (A)
RMS On-State Current (A)
Allowable Ambient Temperature vs.
RMS On-State Current
Repetitive Peak Off-State Current vs.
Junction Temperature
160
Ambient Temperature (°C)
104
14
Conduction Time (Cycles at 60Hz)
160
Case Temperature (°C)
103
16
On-State Power Dissipation (W)
103
Maximum On-State Power Dissipation
Natural convection
No Fins
Curves apply regardless
of conduction angle
Resistive, inductive loads
140
120
100
80
60
40
20
0
0
0.5
1.0
1.5
2.0
2.5
RMS On-State Current (A)
R07DS0502EJ0200 Rev.2.00
Oct 14, 2011
3.0
Repetitive Peak Off-State Current (Tj = t°C)
× 100 (%)
Repetitive Peak Off-State Current (Tj = 25°C)
Transient Thermal Impedance (°C/W)
Maximum Transient Thermal Impedance
Characteristics (Junction to ambient)
106
Typical Example
105
104
103
102
–40
0
40
80
120
160
Junction Temperature (°C)
Page 4 of 7
BCR8LM-14LJ
Preliminary
103
Latching Current vs.
Junction Temperature
Latching Current (mA)
102
0
40
T2+, G–
Typical Example
102
101
80
120
100
–40
160
0
40
80
120
160
Junction Temperature (°C)
Junction Temperature (°C)
Breakover Voltage vs.
Junction Temperature
Breakover Voltage vs.
Rate of Rise of Off-State Voltage (Tj = 125°C)
160
Typical Example
140
120
100
80
60
40
20
0
−40
Distribution
T2+, G+
Typical Example
T2–, G–
0
40
80
120
160
Breakover Voltage (dv/dt = xV/μs)
× 100 (%)
Breakover Voltage (dv/dt = 1V/μs)
101
−40
103
Typical Example
160
Typical Example
Tj = 125°C
140
120
100
80
60
III Quadrant
40
I Quadrant
20
0
101
102
103
104
Junction Temperature (°C)
Rate of Rise of Off-State Voltage (V/μs)
Breakover Voltage vs.
Rate of Rise of Off-State Voltage (Tj = 150°C)
Commutation Characteristics (Tj = 125°C)
160
Typical Example
Tj = 150°C
140
120
100
80
III Quadrant
60
40
I Quadrant
20
0
101
102
103
104
Rate of Rise of Off-State Voltage (V/μs)
R07DS0502EJ0200 Rev.2.00
Oct 14, 2011
Critical Rate of Rise of Off-State
Commutating Voltage (V/μs)
Breakover Voltage (dv/dt = xV/μs)
× 100 (%)
Breakover Voltage (dv/dt = 1V/μs)
Breakover Voltage (Tj = t°C)
× 100 (%)
Breakover Voltage (Tj = 25°C)
Holding Current (Tj = t°C)
× 100 (%)
Holding Current (Tj = 25°C)
Holding Current vs.
Junction Temperature
Time
Main Voltage
(dv/dt)c
VD
Main Current
(di/dt)c
IT
τ
Time
101
Minimum
Characteristics
Value
100
100
Typical Example
Tj = 125°C
IT = 4A
τ = 500μs
VD = 200V
f = 3Hz
I Quadrant
III Quadrant
101
102
Rate of Decay of On-State
Commutating Current (A/ms)
Page 5 of 7
BCR8LM-14LJ
Preliminary
Gate Trigger Current vs.
Gate Current Pulse Width
Time
Main Voltage
(dv/dt)c
VD
Main Current
(di/dt)c
IT
τ
Time
101
Gate Trigger Current (tw)
× 100 (%)
Gate Trigger Current (DC)
Critical Rate of Rise of Off-State
Commutating Voltage (V/μs)
Commutation Characteristics (Tj = 150°C)
Typical Example
Tj = 150°C
IT = 4A
τ = 500μs
VD = 200V
f = 3Hz
III Quadrant
I Quadrant
Minimum
Characteristics
Value
100
100
101
102
103
Typical Example
IFGT I
IRGT I
IRGT III
102
101 0
10
101
102
Rate of Decay of On-State
Commutating Current (A/ms)
Gate Current Pulse Width (μs)
Gate Trigger Characteristics Test Circuits
Recommended Circuit Values Around The Triac
6Ω
6Ω
Load
C1
A
6V
V
V
Test Procedure II
Test Procedure I
R1
A
6V
330Ω
330Ω
C0
C1 = 0.1 to 0.47μF
R1 = 47 to 100Ω
R0
C0 = 0.1μF
R0 = 100Ω
6Ω
A
6V
V
330Ω
Test Procedure III
R07DS0502EJ0200 Rev.2.00
Oct 14, 2011
Page 6 of 7
BCR8LM-14LJ
Preliminary
Package Dimensions
Package Name
TO-220FL
JEITA Package Code
⎯
Previous Code
TO-220FL
RENESAS Code
PRSS0003AF-A
Unit: mm
6.5 ± 0.3
3.0 ± 0.3
2.8 ± 0.2
φ 3.2 ± 0.2
3.6 ± 0.3
12.5 ± 0.5
15.0 ± 0.3
10.0 ± 0.3
MASS[Typ.]
1.5g
1.15 ± 0.2
1.15 ± 0.2
0.75 ± 0.15
0.40 ± 0.15
4.5 ± 0.2
2.54 ± 0.25
2.6 ± 0.2
2.54 ± 0.25
Ordering Information
Orderable Part Number
BCR8LM-14LJ#B00
BCR8LM-14LJ-A8#B00
R07DS0502EJ0200 Rev.2.00
Oct 14, 2011
Packing
Tube
Tube
Quantity
50 pcs.
50 pcs.
Remark
Straight type
A8 Lead form
Page 7 of 7
Notice
1.
All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas
Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to
be disclosed by Renesas Electronics such as that disclosed through our website.
2.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
3.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and
regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to
the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is
prohibited under any applicable domestic or foreign laws or regulations.
6.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
7.
Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas
Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the
use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics.
The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard":
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically
designed for life support.
"Specific":
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical
implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
9.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1)
"Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2)
"Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: +1-905-898-5441, Fax: +1-905-898-3220
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-65030, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: +65-6213-0200, Fax: +65-6278-8001
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2011 Renesas Electronics Corporation. All rights reserved.
Colophon 1.1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement