D-50

Parts Manual

J.L.A.

Meadowcroft Lane, Halifax Road

Ripponden W. Yorkshire, England

HX6 4AJ

Telephone: 1 422 822282 / Fax: 1 422 824390

031202JCARRITA/mcronan ADC Part No. 450591

Retain This Manual In A Safe Place For Future Reference

This product embodies advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO.

D-50

DISTRIBUTOR’S NAME ___________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your distributor or J.L.A. When ordering replacement parts from the factory, you can FAX your order to J.L.A. at 1 422-824390 or telephone your order directly to the J.L.A. Parts Department at 1 422-822282.

Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Table of Contents

OPL Control Door Assembly

For models mfd. as of July 1, 2002 ................................................................................................... 3

OPL Control Door Assembly

For models mfd. prior to July 1, 2002 ............................................................................................... 4

Coin Control Door Assembly .................................................................................................................. 5

Phase 7 OPL Microprocessor Control Panel Assembly ........................................................................... 6

Phase 7 OPL Microprocessor Control Box Assembly ............................................................................. 7

Phase 7 Coin Microprocessor Control Panel Assembly ........................................................................... 8

Phase 7 Coin Microprocessor Control Box Assembly ............................................................................. 9

Coin Vault Assembly ............................................................................................................................. 10

Front Panel Assembly ........................................................................................................................... 11

Main Door “Steel” Assembly ................................................................................................................ 12

Main Door Switch Assembly ................................................................................................................. 13

Basket (Tumbler)/Support Assemblies ................................................................................................... 14

Lint Drawer/Lint Drawer Switch Assemblies .......................................................................................... 15

Idler Bearing Assembly ................................................................................................................... 16, 17

Basket (Tumbler) Bearing Assembly ................................................................................................ 18, 19

Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................................ 20, 21

Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 22, 23

Sensor Bracket Assembly ............................................................................................................... 24, 25

Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 26, 27

Hot Surface Ignition (HSI) Burner Assembly ................................................................................... 28, 29

Electric Oven Assembly .................................................................................................................. 30, 31

Gas Burner Sail Switch/Hi-Limit Assemblies .......................................................................................... 32

Rear Electric Relay Panel Assembly ...................................................................................................... 33

Reversing Electric Relay Panel Assembly ......................................................................................... 34, 35

Steam Coil/Air-Operated Steam Damper Assembly ........................................................................ 36, 37

S.A.F.E. Temperature Probe Assembly ................................................................................................. 38

S.A.F.E. Solenoid and Piping Assembly ................................................................................................ 39

Outer Top/Back Guard Assemblies ....................................................................................................... 40

Electrical Oven Component Application Chart ....................................................................................... 41

Additional Parts Available ..................................................................................................................... 42

OPL Control Door Assembly

For models mfd. as of July 1, 2002

3

Illus. No.

Part No.

Qty.

Description

1

4

5

2

3

6

7

8

883574

150321

117604

150317

102502

154011

102603

102601

1

2

1

2

4

2

1

1

White OPL Control Door

(includes illus. nos. 1 and 3)

#10-32 x 1/2” Phillips Machine Screw

Neoprene Sponge Tape (sold by the foot)

#10-16 x 3/4” TORX + BTN Type 1

Control Door Support Rod

#10-32 Multi-Thread U-Nut

Control Door Rod Support Catch

Control Door Retainer Clip

4

OPL Control Door Assembly

For models mfd. prior to July 1, 2002

Illus. No.

Part No.

Qty.

Description

1 883294 1

2

3

4

5

150314

117604

--------*

154011

4

2

1

4

White Control Door Assembly

(includes illus. nos. 1 and 3)

#10-32 x 1/2” TORX Plus Machine Screw

Noise Suppressor Tape (sold by the foot)

Logo

#10-32 Multi-Thread U-Nut

* Contact reseller for logo.

Coin Control Door Assembly

5

Illus. No.

Part No.

Qty.

Description

1 883575 1

2

3

4

5

6

7

8

117604

152014

117604

883525

-------*

160015

160104

160016

3

4

3

1

1

1

1

1

Phase 7 Coin Control Door Assembly

(includes illus. nos. 1 through 5)

Neoprene Sponge Tape (sold by the foot)

1/4-20 Free Spin Wash Nut

Neoprene Sponge Tape (sold by the foot)

Coin Control Door Trim

Logo

Lock with Hardware and Key

Key ONLY

Lock Cam ONLY

* Contact reseller for logo.

6

Phase 7 OPL Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

1

2

3

4

5

6

7

112571

850984

883301

883277

150005

153010

136016

136097

1

1

1

1

2

2

1

1

Phase 7 OPL Keyboard

Phase 7 Microprocessor Controller (computer) Panel ONLY

Phase 7 OPL Reversing Microprocessor Controller (computer) Control

Panel Assembly Complete

(includes illus. nos. 1 through 7)

Phase 7 OPL Microprocessor Controller (computer) ONLY

#6-32 x 3/4” Phillips Round Head Machine Screw

#6 Star Washer

5-Amp Fuse

500 mA Fuse

Phase 7 OPL Microprocessor Control Box Assembly

7

Illus. No.

Part No.

Qty.

Description

3

4

5

1

2

6

7

122681

122676

122646

122683

122640

122706

122669

1

1

1

1

1

*

*

10-Pin Connector

8-Pin Connector

2-Pin Connector

6-Pin Terminal

9-Pin Terminal

#20-16 U.M.N.L. Socket

Female Crimp Terminal

* As needed.

8

Phase 7 Coin Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

3

4

1

2

5

6

7

8

9

137250

137270

883434

112575

153010

150005

152102

824363

801297

830159

1

1

1

1

4

4

4

1

1

1

Phase 7 Coin Ribbon Cable

16” x 1” Large Character Display

Phase 7 Coin Board

Phase 7 Keyboard

#6 Internal and External Star Washers

#6-32 x 1/4” Phillips Round Head Machine Screw

M3 Metric Hex Nut

Phase 7 Coin Control Panel ONLY

Phase 7 Coin Control Panel Assembly

(includes illus. nos. 1 through 9)

Phase 7 Programmable Euro Coin Acceptor Assembly

Phase 7 Coin Microprocessor Control Box Assembly

9

Illus. No.

Part No.

Qty.

Description

3

4

5

6

1

2

122681

122676

122646

122669

122640

122706

1

1

1

*

1

*

10-Pin Connector

8-Pin Connector

2-Pin Connector

Female Crimp Terminal

9-Pin Connector

#20-16 U.M.N.L. Socket

* As needed.

10

Coin Vault Assembly

Illus. No.

Part No.

Qty.

Description

1

2

3

4

802112

802117

160028

875061

160105*

802020

1

1

1

1

1

1

7

8

5

6

9

802019

125915

802018

152014

102502

102601

102603

1

1

1

4

1

1

1

* Specify key number when ordering.

Microprocessor Coin Vault Assembly Complete

(includes illus. nos. 1 through 6)

Microprocessor Coin Vault ONLY

Cam for 1/4” Turn Lock ONLY

1/4” Turn Lock with Key and Cam

1/4” Turn Mer-Pel Key ONLY

1/4” Turn Coin Box Assembly

(includes illus. nos. 2 through 5)

1/4” Turn Coin Box ONLY without Faceplate

High Security (Greenwald) Coin Box ONLY with Key

1/4” Turn Coin Box Faceplate ONLY

1/4-20 Free Spin Wash Nut

Control Door Support Rod

Control Door Rod Retainer Clip

Control Door Rod Catch

Front Panel Assembly

11

Illus. No.

Part No.

Qty.

Description

1

2

3

4

5

6

883137

150313

150318

--------

--------

881987

154215

1 White Front Panel Assembly

(includes illus. nos. 1, 5, and 6)

11 #10-16 x 1/2” TORX + BTN Type 1

1

1

25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw)

Main Door Hinge

1

1

2

(refer to Main Door “Steel” Assembly on page 12)

Lint Drawer Switch

(refer to Lint Drawer/Lint Drawer Switch Assemblies on page 15)

Friction Door Latch Assembly

(includes illus. nos. 5 and 6)

5/32” Pop Rivet

12

Main Door “Steel” Assembly

3

4

5

6

3

3

1

1

1

2

3

3

1

1

2

1

1

1

1

1

1

881150

102354

170731

881152

150445

153031

881151

150445

150683

152014

151010

150120

150683

152014

881210

102211

170731

Main Door Switch Assembly

13

Illus. No.

Part No.

Qty.

3

4

5

6

1

2

150006

152013

153010

137005

122636

881213

881216

2

1

2

2

2

1

1

7 150301 2

Description

#6-32 x 7/8” Phillips Pan Head Machine Screw

#6-32 Hex Nut

#6 Star Washer

Door Switch

Flag Terminal

White Main Door Switch Housing ONLY

White Main Door Switch Housing Complete

(includes illus. nos. 1, 2, 3, 4, and 6)

#8-18 x 7/16” Phillips Pan Head TEK Screw

14

Basket (Tumbler)/Support Assemblies

8

9

10

11

--

4

5

6

7

Illus. No.

Part No.

Qty.

Description

1* 800978

883302

2

3

150313

150429

301426

301425

150500

100903

153004

800616

152005

153005

153004

116001

401010

4

4

1

2

1

4

4

4

1

1

1

1

Basket (tumbler) ONLY (without felt collar)

Basket (tumbler)/Support Assembly

(includes illus. nos. 1 through 10)

40 #10-16 x 1/2” TORX Crimptite Screw

1

2

TORX Screw Hand Driver

Stainless Steel Basket (tumbler) Rib ONLY (low rib)

Stainless Steel Tapered Basket (tumbler) Rib ONLY (high rib)

5/16-18 x 3/4” Socket Button Head Screw

3/8-16 x 38-1/2” Tie Rod

3/8” Flat Washer

Basket (tumbler) Support ONLY

3/8-16 Hex Nut

3/8” Lock Washer

3/8” Flat Washer

Felt Collar ONLY

#847 Adhesive for Felt Collar (5.0 oz. tube)

* Felt collar is not included and must be ordered separately.

Lint Drawer/Lint Drawer Switch Assemblies

15

Illus. No.

Part No.

Qty.

Description

1

4

5

2

3

6

7

8

9

882952

117605

122116

122605

122701

122801

833123

304136

150301

122700

122604

* As required.

1

1

*

1

1

5

1

1

2

*

1

White Lint Drawer Assembly

(includes illus. nos. 1 and 2)

Gasket (sold by the foot)

Lint Drawer Switch

4-Pin Socket Connector ONLY

Socket Terminal ONLY

Pin/Socket Extraction Tool

Lint Drawer Switch Box Assembly

(includes illus. nos. 3 through 6)

Lint Drawer Switch Box ONLY

#8-18 x 7/16” Phillips Pan Head TEK Screw

Pin Terminal ONLY

4-Pin Connector ONLY

16

Idler Bearing Assembly

Idler Bearing Assembly

Illus. No.

Part No.

Qty.

Description

1 100100 1

2

3

7

8

9

10

11

12

4

5

6

100108

101129

100105

100112

154301

100705

882576

150617

153005

153004

801009

152004

150509

1

1

1

1

2

1

1

2

2

2

1

1

1

5L-660 V-Belt (basket [tumbler] to idler)

For Non-Reversing Models ONLY

5L-680 V-Belt (basket [tumbler] to idler)

For Reversing Models ONLY

9” x 2-1/2” Compound Pulley

4L-520 V-Belt (idler to motor)

For Non-Reversing Models ONLY

4L-610 V-Belt (idler to motor)

For Reversing Models ONLY

5/16-18 x 1” Allen Setscrew

3/16” x 3/16” x 1-3/8” Key

Idler Bearing Assembly Complete

(includes illus. nos. 5 through 12)

3/8-16 x 1” Hex Head Machine Bolt

3/8” Lock Washer

3/8” Flat Washer

Idler Square Washer

5/16-18 Hex Nut

5/16-18 x 3” Hex Head Machine Bolt

17

18

Basket (Tumbler) Bearing Assembly

Basket (Tumbler) Bearing Assembly

Illus. No.

Part No.

Qty.

Description

10

11

12

13

14

5

6

7

8

9

15

16

17

18

19

1

2

3

4

20

21

22

23

24

880220

153025

152050

883387

882543

880779

150601

153004

153004

153005

152005

154326

152004

150621

153002

153004

150501

102120

883386

100724

100735

101100

101118

101110

100100

100108

150610

152004

1

4

4

1

1

1

2

2

2

2

2

2

2

2

4

6

4

1

1

1

1

1

1

1

1

1

2

2

1-3/4” Flange Bearing

9/16” Lock Washer

9/16-12 Hex Nut

Pillow Block Bearing Assembly Complete

(includes illus. nos. 4 through 18, 23, and 24)

Pillow Block Bearing Platform ONLY

1-3/8” Pillow Block Bearing

3/8-16 x 2” Hex Bolt

3/8” Flat Washer

3/8” Flat Washer

3/8” Lock Washer

3/8-16 Hex Nut

5/16-24 x 3/8” Setscrew

5/16-18 Hex Nut

5/16-18 x 1-1/2” Tap Bolt

5/16” Lock Washer

3/8” Flat Washer

5/16-18 x 3/4” Tap Bolt

Sintered 8 Magnet

Rotational Sensor Assembly

Shaft Key (for non-reversing models Only)

Shaft Key (for reversing models Only)

18” Pulley (for non-reversing models Only)

18-3/4” Pulley (for reversing models Only)

1” Taper Lock Bushing (for reversing models Only)

5L-660 V-Belt (basket [tumbler] to idler)

For Non-Reversing Models ONLY

5L-680 V-Belt (basket [tumbler] to idler)

For Reversing Models ONLY

5/16-18 x 1-1/2 Allen Setscrew

5/16-18 Hex Nut

19

20

Non-Reversing T.E.F.C. Motor Mount Assembly

Non-Reversing T.E.F.C. Motor Mount Assembly

Illus. No.

Part No.

Qty.

Description

3

4

1

2

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

100105

100705

101133

150501

153002

153001

100068

122701

122801

137030

152004

153002

153001

117604

154000

850017

817074*

153050

100604

100702

153050

152006

1

1

1

4

4

4

1

8

1

1

4

4

4

4

4

1

1

3

1

1

1

2

4L-520 V-Belt (motor to idler)

3/16” x 3/16” x 1-3/8” Key

5/8” x 2-1/4” Motor Pulley

5/16-18 x 3/4” Tap Bolt

5/16” Lock Washer

5/16” Flat Washer

3/4 HP 240v 1ø Totally Enclosed Fan-Cooled (T.E.F.C.) Motor with Plug

(56Z frame)

Socket Terminal ONLY

Pin/Socket Extraction Tool

8-Pin Housing Connector

5/16-18 Hex Nut

5/16” Lock Washer

5/16” Flat Washer

Noise Suppressor Tape (sold by the foot)

5/16-18 Tinnerman Nut

Non-Reversing Motor Mount ONLY with Gasket (56Z frame)

(includes illus. no. 13)

3/4 HP 240v 1ø 50 Hz Totally Enclosed Fan-Cooled (T.E.F.C.) Motor

Mount Assembly Complete with Plug Motor

(includes illus. nos. 2 through 7 and 13 through 20)

1/2” S.A.E. Flat Washer

12-1/2” Impellor with 1/2” Bore

1/8” x 1/8” x 1-1/2” Key

1/2” S.A.E. Flat Washer

1/2-20 Left Hand Jam Nut

* Specify voltage when ordering.

21

22

Reversing T.E.F.C. Motor Mount Assembly

Reversing T.E.F.C. Motor Mount Assembly

Illus. No.

Part No.

Qty.

Description

14

15

16

17

18

10

11

12

13

1

2

3

4

5*

6

7

8

9*

19

20

21

22

23

24

100112

100705

101133

120200

181003

150501

153002

153001

100007

120200

150501

153002

153001

154000

152004

153002

153001

850070

803803*

117604

153050

100702

100604

153050

152006

1

1

1

1

1

4

4

4

1

1

4

4

4

8

7

4

4

1

1

1

1

2

2

4

1

4L-610 V-Belt (motor to idler)

3/16” x 3/16” x 1-3/8” Key

5/8” x 2-1/4” Motor Pulley

3/8” x 90° Connector

1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed Fan-Cooled

(T.E.F.C.) Motor (56Z frame)

5/16-18 x 3/4” Tap Bolt

5/16” Lock Washer

5/16” Flat Washer

1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed Fan-Cooled

(T.E.F.C.) Motor (56Z frame)

3/8” x 90° Connector

5/16-18 x 3/4” Tap Bolt

5/16” Lock Washer

5/16” Flat Washer

5/16-18 Tinnerman Nut

5/16-18 Hex Nut

5/16” Lock Washer

5/16” Flat Washer

Reversing Motor Mount ONLY with Gasket (56Z frame)

(includes illus. no. 19)

Reversing Totally Enclosed Fan-Cooled (T.E.F.C.) Motor Mount Assembly

(includes illus. nos. 2 through 14 and 18 through 24)

Noise Suppressor Tape (sold by the foot)

1/2” S.A.E. Flat Washer

1/8” x 1/8” x 1-1/2” Key

12-1/2” Impellor with 1/2” Bore

1/2” S.A.E. Flat Washer

1/2-20 Left Hand Jam Nut

* Specify voltage when ordering.

23

24

Sensor Bracket Assembly

Sensor Bracket Assembly

Illus. No.

Part No.

Qty.

Description

1 880251 1

6

7

8

9

10

4

5

2

3

11

12

13

130103

153010

152000

121028

122701

122605

154007

150005

817046

322062

122604

122700

150301

1

2

2

2

4

1

2

2

1

1

1

4

2

1/4” Temperature Sensor Probe Assembly

(includes illus. nos. 1 and 5 through 8)

225° Hi-Limit Thermostat

#6 Star Washer

#6-32 Hex Nut

Insulated Terminal ONLY

Socket Terminal ONLY

4-Pin Socket Connector ONLY

1/4” Tinnerman Push On Fastener

#6-32 x 1/4” Phillips Round Head Machine Screw

Microprocessor Sensor Bracket Assembly Complete

(includes illus. nos. 1 through 10)

Universal Sensor Bracket ONLY

4-Pin Connector ONLY

Pin Terminal ONLY

#8-18 x 7/16” Phillips Pan Head TEK Screw

25

26

Direct Spark Ignition (DSI) Burner Assembly

Direct Spark Ignition (DSI) Burner Assembly

24

25

26

27

28

17

18

19

20

21

22

23

10

11

12

13

14

15

16

Illus. No.

Part No.

Qty.

Description

5

6

7

8

9

3

4

1

2

817207

883282

883310

142935

319704

150001

151000

154004

130201

802799

150303

122200

105500

319202

154002

140804

141232

318700

150300

128933

883255

141314

142809

850899

817174

809307

801114

817027

150309

141105

150108

152013

151001

140820

2

2

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

3

1

3

9

1

3

3

2

3

3

1

6

1

1

Ignitor Probe Assembly

Direct Spark Ignition (DSI) Module with Three (3) Tries

Direct Spark Ignition (DSI) Module Mounting Bracket Assembly

#10-16 x 1/2” Hex Head TEK Crimptite Screw

Large Tube Burner

#8-32 x 1/2” Pan Head Machine Screw

#6-32 Hex Nut

#8-32 Pal Nut

#29 Burner Orifice (natural gas)

#48 Burner Orifice (liquid propane [L.P.] gas)

1/2” Direct Spark Ignition (DSI) Manifold (3-port)

Pipe Bracket (bent)

#10-16 x 1/2” Hex Washer TEK Screw

CE Gas Valve (natural gas)

CE Gas Valve (liquid propane [L.P.] gas)

90º x 1/2” x 1-1/2” Gas Shut Off Assembly

1/2” x 29-1/8” Pipe

Direct Spark Ignition (DSI) 3-Tube Burner Box

Natural Gas Burner Assembly Complete

Liquid Propane (L.P.) Gas Burner Assembly Complete

Liquid Propane (L.P.) Conversion Kit

Steam to Gas Interface Plate

1/2” Coupling

Hi-Limit Mounting Bracket

#6-32 x 1/2” Round Head Machine Screw

#6-32 Pal Nut

Twin Speed Nut

330º Hi-Limit with Manual Reset

Sail Switch Top and Switch Bracket

#4 x 3/4” Pan Head “A” Machine Screw

Sail Switch

Sail Switch Actuator Rod

Sail Switch Damper (flat)

1/8” Push On Fastener

27

28

Hot Surface Ignition (HSI) Burner Assembly

Hot Surface Ignition (HSI) Burner Assembly

Illus. No.

Part No.

Qty.

Description

3

4

1

2

5

6

7

8

9**

10

11

12

13

14

15

16

17

18

150301

128920

128921

150309

141105

150108

810029

151001

140820

140804

141232

318700

150300

128933

883255

141314

142809

817068*

817069*

1

1

1

7

3

1

883282 1

883310*** 1

151000

128975

4

1

3

1

3

3

3

1

3

7

1

1

1

1

1

#8-18 x 7/16” Phillips Pan Head TEK Screw

Hot Surface Ignitor 24V 2-1/2” Long

Hot Surface Ignition (HSI) Flame Sensor

#10-16 x 1/2” Hex Head TEK Crimptite Screw

Large Tube Burner

#8-32 x 1/2” Pan Head Machine Screw

Hot Surface Ignition (HSI) Module Mounting Bracket Assembly

#8-32 Pal Nut

#29 Orifice (natural gas)

#48 Orifice (liquid propane [L.P.] gas)

1/2” Manifold (3-port)

Pipe Bracket (bent)

#10-16 x 1/2” Hex Washer TEK Screw

CE Gas Valve (natural gas)

CE 1/2” Liquid Propane (L.P.) Gas Valve

90º x 1/2” x 1-1/2” Gas Shut Off Assembly

1/2” x 29-1/8” Pipe

Natural Gas Burner Assembly Complete

(includes illus. nos. 1 through 8 and 10 through 18)

Liquid Propane (L.P.) Gas Burner Assembly Complete

(includes illus. nos. 1 through 8 and 10 through 18)

D-50 Liquid Propane (L.P.) Conversion Kit

Steam to Gas Interface Plate

#6-32 Pal Nut

CE Hot Surface Ignition (HSI) Module

* Burner orifices are not included and must be ordered separately.

** Consult factory for elevations over 2,000 feet.

*** Needed when converting steam heat to gas heat.

29

30

Electric Oven Assembly

Electric Oven Assembly

Illus. No.

Part No.

Qty.

Description

1

2

3

4

19

20

21

22

23

14

15

16

17

18

9

10

11

12

13

7

8

5

6

24

25

26

27

28

29

30

31

--

803007*

--------*

--------*

150300

802800

802801

154004

150300

802799

122200

150303

105500

319202

154002

150300

803100

320611

150301

130400

150300

154001

121010

152014

--------*

--------*

120081

120080

152008

121011

--------*

153009

321301

150207

1

1

-

2

1

1

1

2

1

1

2

1

1

1

2

1

1

2

1

2

2

1

3

1

1

-

-

-

-

-

-

1

2

883310** 1

Large Electric Oven Box ONLY

Electric Oven Assembly Complete

Electric Element

#10-16 x 1/2” Hex Washer TEK Screw

Sail Switch Box with Bracket and Cover ONLY

Sail Switch Box Assembly Complete

(includes illus. nos. 4 through 12)

Twin Speed Nut

#10-16 x 1/2” Hex Washer TEK Screw

Sail Switch Box Cover and Bracket ONLY

Sail Switch ONLY

#4 x 3/4” Phillips Pan Head “A” Machine Screw

Sail Switch Actuator Rod

Sail Switch Damper (flat)

1/8” Push On Fastener

#10-16 x 1/2” Hex Washer TEK Screw

Electric Oven Front Cover ONLY

Large Relay Box Cover ONLY

#8-18 x 7/16” Phillips Pan Head TEK Screw

290º Hi-Limit Thermostat

#10-16 x 1/2” Hex Washer TEK Screw

#10-24 Speed Nut

L-70 Ground Lug

1/4-20 Free Spin Wash Nut

Oven Relay

Oven Relay Replacement Coil

Internal Ceramic Insulator (2 per element)

External Ceramic Insulator (2 per element)

#10-32 Hex Nut (4 per element)

Bus Bar (sold by the foot)

Terminal Lug

#10 Star Washer (2 per element)

Large Electric Oven Right Side Cover ONLY

#10-24 x 1/2” Phillips Pan Head Machine Screw

Steam to Electric Transition Plate...Not Illustrated

* Refer to Electrical Oven Component Application Chart on page 41.

** Needed when converting dryer from steam heat to electric heat.

31

32

Gas Burner Sail Switch/Hi-Limit Assemblies

Illus. No.

Part No.

Qty.

Description

7

8

9

5

6

1

2

3

4

10

11

12

13

14

15

154004

150300

802799

150303

122200

105500

319202

154002

802800

802801

142809

150300

319704

151000

150001

130201

1

2

1

2

1

1

1

1

1

1

1

2

1

2

2

1

Twin Speed Nut

#10-16 x 1/2” Hex Washer TEK Screw

Sail Switch Box Cover and Bracket ONLY

#4 x 3/4” Phillips Pan Head “A” Machine Screw

Sail Switch ONLY

Sail Switch Actuator Rod

Sail Switch Damper (flat)

1/8” Push On Fastener

Sail Switch Box with Cover and Bracket ONLY

Sail Switch Assembly Complete

(includes illus. nos. 1 through 9)

1/2” x 29-1/8” Pipe/Nipple

#10-16 x 1/2” Hex Washer TEK Screw

Hi-Limit Mounting Bracket ONLY

#6-32 Pal Nut

#6-32 x 1/2” Phillips Round Head Machine Screw

330º Manual Reset Hi-Limit Thermostat ONLY

Rear Electric Relay Panel Assembly

33

Illus. No.

Part No.

Qty.

Description

1

2

3

4

5

6

12

13

14

15

16

7

8

9

10

11

151000

150300

150008

120716

322812

822798

830273

830426

822799

830141

136008

136057

150301

150297

152004

121010

153002

132495

121300

131932

2

1

1

2

2

1

1

1

1

1

2

2

4

1

1

1

1

1

3

1

#6-32 Pal Nut

#10-16 x 1/2” Hex Washer TEK Screw

#6-32 x 1-1/4” Phillips Pan Head Machine Screw

2-Position Terminal Block

Rear Electric Mounting Plate ONLY

Rear Electric Panel Assembly Complete - 230 Volt 1ø (for gas models Only)

(includes illus. nos. 1 through 14)

Rear Electric Panel Assembly Complete - 230 Volt 1ø

(for steam models Only)

(includes illus. nos. 1 through 14)

Rear Electric Panel Assembly Complete - 415 Volt 3ø with 1ø Motor

(for electric models)

(includes illus. nos. 1 through 14 and 16)

Transformer Assembly - 230 Volt 1ø

Transformer Assembly - 415 Volt 3ø

Fuse Holder ONLY

1/2-Amp (Slo-Blo) Fuse ONLY

#8-18 x 7/16” Phillips Pan Head TEK Screw

#10 x 1/2” Green Hex Washer TEK Screw

5/16-18 Hex Nut

L-70 Ground Lug

5/16” Lock Washer

3-Pole Contactor

Open/Closed Bushing

24V SPST Relay (for electric heated models Only)

34

Reversing Electric Relay Panel Assembly

Reversing Electric Relay Panel Assembly

35

Illus. No.

Part No.

Qty.

Description

5

6

7

8

9

3

4

1

2

10

11

12

13

14

15

16

17

150300

150008

120701

132497

822784

136008

136057

150301

150297

152004

121010

153002

132495

322812

822783

830117

--------*

151000

120765

131932

1

1

1

3

1

1

1

2

2

1

1

1

1

1

1

1

1

2

1

1

#10-16 x 1/2” Hex Washer TEK Screw

#6-32 x 1-1/4” Phillips Pan Head Machine Screw

4-Position Terminal Block

3-Pole Reversing Contactor

Transformer Assembly - 415 Volt 3ø

Fuse Holder ONLY

1/2-Amp (Slo-Blo) Fuse ONLY

#8-18 x 7/16” Phillips Pan Head TEK Screw

#10 x 1/2” Green Hex Washer TEK Screw

5/16-18 Hex Nut

L-70 Ground Lug

5/16” Lock Washer

3-Pole Contactor

Rear Electric Mounting Plate ONLY

Rear Electric Panel Assembly Complete - 415 Volt 3ø (for gas models)

(includes illus. nos. 1 through 16)

Rear Electric Panel Assembly Complete - 415 Volt 3ø (for steam models)

(includes illus. nos. 1 through 16)

Rear Electric Panel Assembly Complete - 415 Volt 3ø (for electric models)

(includes illus. nos. 1 through 17)

#6-32 Pal Nut

Standard End Bracket

24V SPST Relay (for electric heated models Only)

* Not available at time of printing (contact factory for further information).

36

Steam Coil/Air-Operated Steam Damper Assembly

Steam Coil/Air-Operated Steam Damper Assembly

26

27

28

29

30

21

22

23

24

25

14

15

16

17

18

19

20

8

9

10

11

12

13

5

6

7

1

2

3

4

165011

153002

152004

152002

153007

820321

880280

100496

143238

100498

150002

153010

152000

330987

152002

153007

100520

153007

152002

115995

102350

151006

152051

100495

323365

152002

153007

143163

143110

143163

Illus. No.

Part No.

Qty.

Description

2

1

2

2

1

1

1

1

2

2

4

2

1

1

6

6

4

Steam Coil Assembly

5/16” Lock Washer

5/16-18 Hex Nut

1/4-20 Hex Nut

1/4” Lock Washer

Steam Damper Hinge Assembly

Steam Damper Assembly

2

2

1

1

1

1

1

1

4

4

(includes illus. nos. 7, 10, and 11)

1/4” Lock Washer

1/4-20 Hex Nut

60 Steam Damper Gasket (sold by the inch)

1

2

Steam Damper Foam (68-1/2” length)

5/16-24 Stainless Steel Acorn Nut

5/16-24 Right Hand Jam Nut

11/16” Diagram x 3” Stroke Piston

Left and Right Piston Support

1/4-20 Hex Nut

1/4” Lock Washer

1/4” x 1/8” Connector

1/4” Tubing (sold by the foot)

1/4” x 1/8” Connector

1/8” Needle Valve

1/8” Close Nipple

3-Way Micro Valve - 24 VAC

#6-32 x 1” Slotted Machine Screw

#6 Star Washer

#6-32 Hex Nut

Micro Valve Support Bracket

1/4-20 Hex Nut

1/4” Lock Washer

1/8” N.P.T. Silencer (muffler)

37

38

S.A.F.E. Temperature Probe Assembly

Illus. No.

Part No.

Qty.

Description

1

4

5

2

3

822752

154007

390390

150301

122647

1

2

1

2

1

S.A.F.E. Temperature Probe Assembly

(includes illus. nos. 1 through 5)

Push On Fastener

Sensor Bracket ONLY

#8-18 Phillips Pan Head TEK Screw

Connector ONLY

S.A.F.E. Solenoid and Piping Assembly

39

Illus. No.

Part No.

Qty.

Description

7

8

9

10

11

12

13

14

15

16

3

4

5

6

1

2

165114

143220

143251

143208

143099*

311588

143303

143155

150430

150301

143581

142887

824081

143241**

1

1

1

2

6'

1

1

1

2

2

1

1

1

1

143315** 1

136987** 1

S.A.F.E. Solenoid Valve 24V 50/60 Hz

3/8” F.P.T. Brass Tee

3/8” M.P.T. Brass Plug

3/8” Comp x 3/8” M.P.T. Brass Connector

3/8” OD x 0.035 Wall Copper Tubing

Sprinkler Head Mounting Plate

3/8” N.P.T. Brass Locknut

3/8” Brass Elbow 90°

#10 x 1/2” Self Drilling Screw

#8-18 x 7/16” TEK Screw

3 GPM 3/8” F.P.T. Spray Nozzle

3/4” to 3/8” Bushing for S.A.F.E. Solenoid Valve

R.C. Network Assembly

3/8” x Close Brass Nipple

3/8” MNPT x 1/8” FNPT Brass Bushing

Water Jet Pressure Switch

* Sold by the foot.

** For use on coin models only.

40

Outer Top/Back Guard Assemblies

Illus. No.

Part No.

Qty.

Description

1

2

3*

4

5

6*

7

8

9

322809

150301

314424

314422

150301

150300

312533

801577

322082

150301

103500

1

1

1

4

Back Electrical Box Cover

#8-18 x 7/16” Phillips Pan Head TEK Screw

Top Back Guard (for gas models Only)

Top Back Guard (for electric models Only)

7 #8-18 x 7/16” Phillips Pan Head TEK Screw

10 #10-16 x 1/2” Hex Washer TEK Screw

1 Outer Top (for gas models Only)

1

1

Outer Top (for electric models Only)

Bottom Back Guard

13 #8-18 x 7/16” Phillips Pan Head TEK Screw

4 Leveling Leg

* There is no outer top or top back guard on steam models.

k W V O L T A G E P H A S E W I R E

2 8 4 1 5 3 Ø 3 o r 4

A S

O

S E

V E N

M B L Y *

8 3 3 1 3 6

Q t y .

6

E L E

K w

5

M E N

P

1 a

2 r

T

t N o .

0 0 1 3

W I T H

O V

C

E N

R I M P

W I

T E

R E

R M I N A L

Q t y .

S i z e P a r t N o .

T

Q t

E

y .

R

L

M

U

I N

G

A L

P a r t N o .

B U S

1

P /

2 1

B

N :

0 1

A R

1

1 # 8 8 8 2 5 7 1 1 1 2 1 0 1 0 1

O V E N

C a .t

N o .

D P A 4 3

R E L A Y

P

1 a

3 r

1 t

3

N o .

5 7

* Consult factory for oven assemblies not listed.

42

Part No.

114548

114521

114001

114006

114506

120800

120802

120902

120903

121499

121500

122804

404502

Description

“Phase 7 Coin Program Location Summary” Label

“Phase 7 OPL Program Location Summary” Label

“CAUTION Exhaust/Lint Screen” Label

“WARNING - Fire Hazards” Label

“Fuse Rating” Label

1/4” In-Line Connector

Red Butt Connector

#74B Wire Nut

Closed End Connector

5-1/2” Harness Tie

8” Harness Tie

Manometer (hydro gauge) for Measuring Gas Pressure

White Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle)

Additional Parts Available

ADC 450591 1 - 04/16/02-15 2 * 09/25/02-13